scrub: stop export UID= aborting the allow-list scrub mid-loop

CB-633's generated scrub.zsh blanks every non-allow-listed exported name
in one loop wrapped in `{ ... } 2>/dev/null`. In zsh, `export UID=` is
not a failed command: it is a fatal parameter error ("failed to change
user ID: operation not permitted") that aborts the whole sourced file.
The loop stops at UID, every later name is left unscrubbed, and the
report-writing block never runs -- silently, because of the 2>/dev/null.

The inversion is the severity. `env` lists inherited names first and the
names a startup file exports last, so the loop blanked the harmless
inherited half and died immediately before the operator's own exports --
exactly the credentials this policy exists to remove.

Measured on a fleet01 member pane: UID is name 42 of 57, and a decoy
exported from ~/.zshrc sat at 58, non-empty, on 8 of 8 spawns. xtrace
ends at `+scrub.zsh:28> export 'UID='` with rc=126. Reproduced
independently on macOS/zsh 5.9 (fleetd #394).

CONTAINMENT: `eval`, then VERIFY.

Neither `export "$n=" 2>/dev/null || true` nor a `${(t)n}` type guard
contains it -- both still abort, because it is an assignment error and
not a command failure. Only `eval` does. `eval` is safe at that point
because the loop above already rejected every name that is not
[A-Za-z_][A-Za-z0-9_]*, so nothing but a bare identifier reaches it.

Enumerating the specials (UID|EUID|GID|EGID|PPID|LINENO) also works, but
only for the names enumerated: one that turns up exported on another
host brings the abort straight back. `eval` covers all of them.

`eval` alone, though, contains the error WITHOUT blanking the value, so
the name would be reported as blanked having never been blanked --
measured: attempted=59 with UID still 1000. So each name is verified
after the attempt and only counted when it actually blanked. A name that
could not be blanked currently falls into the "allowed" count, which is
imprecise in the safe direction; the honest third count ("tried and could
not blank") needs a report-format change -- readReport treats every
non-first non-blank line as a blanked name -- and belongs with #394.

Why the suite stayed green: EnvAllowListScrubTest starts zsh from a
CLEARED parent (`pb.environment().clear()`), where UID is not an
exported name at all, so the abort cannot reproduce there. The new test
supplies the production shape -- UID present and exported -- and asserts
a report exists, which is written by the last statement in the file and
so proves the script ran to completion. Verified by mutation in both
shapes: reverting the fix fails exactly that test and no other.

Orthogonal to #388, which adds a fifth call site to a script that still
aborts at the same name.

CLAUDE.md

@@ -7,6 +7,14 @@
 > wiki ([Use Cases](https://git.ltms.dev/fleet/fleetd/wiki/7-Use-Cases) → *The portable
 > CLAUDE.md block*); improvements go to the template first, then out to each project. Anything
 > specific to *this* repo lives under §Project addendum below, never inline above it.
+>
+> **Anything you measure in an addendum is perishable.** Date it, give the command that
+> re-measures it and what each outcome means, and tell the reader to delete the section once
+> it stops reproducing. The four parts work together: deciding what would falsify a claim is
+> the expensive step, and a reader in the middle of another task will not pay it, so a bare
+> "verify before relying on this" costs the same space and does nothing. The case this is for
+> is a note that goes stale as a live restriction — it will tell a future session it cannot do
+> the thing at the moment doing it becomes the job.
 
 If no `fleet_*` MCP tools are mounted in this session, this section does not apply — skip it.
 
@@ -71,8 +79,11 @@ below are the procedure — run them in order, every task, not only the big ones
    the final judgment call, verification, merges, and anything that depends on context only you
    hold. Nothing else is yours by default.
 3. **Spawn every delegated unit first** — `fleet_spawn{profile, worktree:true, ticket}`, one per
-   unit, *before* sending any. Pass `profile` explicitly: profiles differ in model and cost, not in
-   tier, so the default is rarely what you want.
+   unit, *before* sending any. Pass `profile` explicitly: profiles differ in model, cost and
+   LIVENESS, not in tier, so the default is rarely what you want. The default is whatever the
+   daemon reports, and on a host where it sits on an exhausted or withdrawn credential every
+   unqualified spawn fails — sometimes loudly, sometimes as a member that spawns fine and then
+   produces nothing. `fleet_profiles` reports the default; check it once per session.
 4. **Then send them all** — `fleet_send{sessionId, content, wait:false}`. Line 1 of every brief is
    `Load the <name> skill.` naming the worker's playbook; those skills are opt-in and that line is
    what makes them reliable. Where the project ships no such skill, spell the procedure out in the
@@ -94,6 +105,18 @@ below are the procedure — run them in order, every task, not only the big ones
 8. **Adjudicate, merge, tear down — yours alone.** Read the diff yourself: fully if it is small,
    targeted at the reported findings and the risky paths if it is large. Reviewer findings direct
    your attention; they never substitute for it. Then merge, then `fleet_stop{paneId}`.
+   **If the forge refuses you the merge** — a protected branch, a token without the grant — the
+   adjudication is still yours. Read the diff, decide, and hand the operator a merge-ready queue
+   with the refusal quoted. Never report a PR as merged, and never call one "ready to merge"
+   without having read the diff yourself. A refusal is exactly when that shortcut is tempting,
+   because no action is left that forces you to look, and taking it turns this step into
+   forwarding a reviewer's verdict — which is delegating the merge by proxy, two lines above.
+   **Test a refusal; do not read it off a permissions field.** A protected branch holds its merge
+   rights separately from the repository permissions, so that field can say yes while the merge is
+   refused, and still say no after a grant makes it work. Probe instead, with a request that cannot
+   succeed on its merits, so a rejection can only mean the refusal. Treat a transport failure as a
+   third answer that proves nothing: a timeout, a DNS error or a bad URL is not a refusal, and
+   counting it as one makes you sure of something you never measured.
 
 **Steps 3 and 4 are separate on purpose** — spawning and sending in one loop is how parallel work
 silently becomes serial, and it is the most common way this layer is wasted. For the same reason,
@@ -140,6 +163,11 @@ The traffic between leads is coordination and nothing else:
 3. **Verify a peer exactly as you verify yourself.** Peer status buys nothing: check the claim
    against the code, and re-run the build. A peer's correction gets the same treatment — right or
    wrong on the evidence, not on who said it. Neither of you merges the other's work unreviewed.
+4. **Ask a peer to read your project addendum.** Your addendum is instruction surface: every future
+   session on your host obeys it, and a wrong one is obeyed just as faithfully as a right one. The
+   author is the worst reader of their own qualifier placement — measured here, one addendum carried
+   two defects and a non-author found both. If you have no peer, at least re-read it asking "which
+   sentence goes false first, and would a reader reach the caveat before acting?"
 
 Being messaged by a peer does not make you its worker: answer with `fleet_reply`, and push back on
 the substance if it is wrong. A peer that simply complies has thrown away the reason there are two of

deploy/fleetd.service

@@ -1,72 +1,80 @@
 # CB-504 — systemd unit for fleetd (Linux).
 #
-# The macOS launchd agent (deploy/dev.ltms.fleetd.plist) is the supervision target for the
-# current single-host deployment. This unit exists for the per-host gateways CB-308 introduces,
-# which will run on Linux.
+# fleetd #360: the previous version of this file started clean and broke the daemon in three ways
+# that nothing logs (see the DO NOT block and the ExecStart/PrivateTmp comments below for what and
+# why). The unit below, plus its companion deploy/herdr.service, is the version that has actually
+# run on fleet01 without those failures. Do not "improve" it back toward the old shape without
+# re-reading why each line is the way it is.
 #
 # Install (user service — fleetd drives the user's herdr, not a system daemon):
 #   mkdir -p ~/.config/systemd/user
-#   cp deploy/fleetd.service ~/.config/systemd/user/
-#   # edit ExecStart / WorkingDirectory / Environment below, then:
+#   cp deploy/fleetd.service deploy/herdr.service ~/.config/systemd/user/
+#   # edit WorkingDirectory / ExecStart below for your host's paths and java location
 #   systemctl --user daemon-reload
-#   systemctl --user enable --now fleetd
+#   systemctl --user enable --now herdr fleetd
+#   loginctl enable-linger $USER      # REQUIRED -- see below
 #   journalctl --user -u fleetd -f
+#
+# `loginctl enable-linger` is not optional and is easy to miss, because leaving it out looks like
+# success: `systemctl --user enable` reports "enabled" and both units run for as long as you stay
+# logged in. A user manager without lingering starts at your first login and stops at your last
+# logout, so the fleet simply does not come back after a reboot -- which is the whole reason to
+# use systemd here rather than the setsid scripts these units replaced. Check it with
+# `loginctl show-user $USER -p Linger`; the answer must be `Linger=yes`.
+#
+# Secrets (AI_GATEWAY_TOKEN, WORKER_GITEA_TOKEN, LAVINMQ_URI, COORD_AMQP_URI, ...) are not set
+# here and need no systemd drop-in: ExecStart runs a login shell, so they come from wherever your
+# login shell already sources them (this host: ~/.fleet/secrets.sh via ~/.zprofile). If a token is
+# missing there, fleetd still starts — the daemon reports every secret a configured profile
+# references, by name, never by value:
+#   journalctl --user -u fleetd | grep 'startup secret'
+# A resolved one logs "startup secret NAME: set (profile 'x' tokenEnv)"; a missing one logs
+# "startup secret NAME: MISSING" at WARN and the daemon starts anyway — the first visible symptom
+# is a member that cannot open a pull request, hours later and in a different component.
 
 [Unit]
-Description=fleetd — claude-bridge message server
+Description=fleetd — fleet message server
 Documentation=https://git.ltms.dev/fleet/fleetd/wiki
-# Ordering only: herdr is a user process and its socket may appear after us. This is advisory —
-# fleetd retries the herdr socket rather than exiting, which is what actually makes a late
-# socket survivable. Do NOT add Requires=: a herdr restart must not take fleetd down with it.
+# Ordering only. fleetd retries the herdr socket rather than exiting, which is what actually makes
+# a late socket survivable. Do NOT add Requires=: a herdr restart must not take fleetd down too.
 After=herdr.service
 Wants=herdr.service
 
 [Service]
 Type=simple
-WorkingDirectory=%h/src/claude-bridge/fleetd
-ExecStart=/usr/lib/jvm/temurin-25-jdk/bin/java -jar target/fleetd.jar fleetd.yaml
+WorkingDirectory=%h/LTMS/fleetd/fleetd
 
-Environment=HERDR_SOCKET_PATH=%h/.config/herdr/herdr.sock
-# PATH matters more than it looks (CB-511): fleetd propagates its own PATH to every worker it
-# spawns, so this line decides whether the fleet can run a build at all. systemd does not source a
-# login shell, so without it the daemon — and every worker — gets a bare default with no JDK/Maven.
-Environment=PATH=/usr/lib/jvm/temurin-25-jdk/bin:/usr/share/maven/bin:/usr/local/bin:/usr/bin:/bin
-# Secrets are NOT set here — this file is committed. Put ALL three tokens in a private drop-in
-# that systemd reads with restrictive permissions. In `systemctl --user edit fleetd`, add:
-#   [Service]
-#   Environment=FLEETD_API_TOKEN=...
-#   Environment=WORKER_GITEA_TOKEN=...
-#   Environment=AI_GATEWAY_TOKEN=...
-# FLEETD_API_TOKEN protects fleetd's API. WORKER_GITEA_TOKEN lets members open pull requests; if
-# it is missing, fleetd still starts, but a member fails when it later tries to open a pull request.
-# AI_GATEWAY_TOKEN authenticates gateway profiles; if it is missing, fleetd still starts, but a
-# gateway profile later returns HTTP 401. Or, put the same three variables in a 0600 file and add:
-# EnvironmentFile=%h/.config/fleetd/env
-# After starting, check which of them actually resolved. The daemon reports every secret a
-# configured profile references, by name, never by value:
-#   journalctl --user -u fleetd | grep 'startup secret'
-# A resolved one logs "startup secret NAME: set (profile 'x' tokenEnv)". A missing one logs
-# "startup secret NAME: MISSING" at WARN — and the daemon starts anyway, which is the whole
-# problem: without this grep the first sign is a member that cannot open a pull request, hours
-# later and in a different component.
-# Note what the report can and cannot tell you. It lists only names some profile actually
-# references (tokenEnv, gitTokenEnv, and the broker uriEnv). A secret nothing references is never
-# reported, because nothing needs it.
+# A LOGIN shell, not java directly. Every secret this daemon needs (AI_GATEWAY_TOKEN,
+# WORKER_GITEA_TOKEN, LAVINMQ_URI, COORD_AMQP_URI) lives in ~/.fleet/secrets.sh, which only
+# ~/.zprofile sources. systemd runs no login shell. Started any other way the daemon boots fine
+# and looks healthy, and the failure appears hours later as a member that cannot open a pull
+# request. exec keeps it one process, so systemd tracks the right PID.
+# This also avoids a SECOND copy of the secrets in a systemd drop-in: one source of truth.
+ExecStart=/bin/zsh -lc "exec java -jar target/fleetd.jar fleetd.yaml"
+
+# PrivateTmp MUST stay false -- see herdr.service. fleetd creates the member ZDOTDIR scrub dir and
+# the opencode config dir under java.io.tmpdir, and the member pane (a herdr child, a different
+# unit) has to read them. A private /tmp turns the credential scrub into a silent no-op.
+PrivateTmp=false
 
 Restart=on-failure
 RestartSec=10s
-# A bad config (e.g. a non-loopback bind without token auth) makes fleetd fail fast by design.
-# Give up rather than restart-loop on a permanent error.
+# A bad config makes fleetd fail fast by design. Give up rather than restart-loop forever.
 StartLimitBurst=5
 StartLimitIntervalSec=120
 
-# The daemon reads the repo, writes worktrees, and talks to a Unix socket — it needs no more.
+# DO NOT add ProtectSystem=, ProtectHome=, ProtectKernelTunables= or ProtectControlGroups=.
+# Measured on fleet01 2026-09-05: each of those gives the unit its own mount namespace, and
+# fleetd resolves a caller role by running lsof to find the loopback peer PID
+# (mcp/LsofPeerPidLookup). Inside such a namespace lsof returns nothing, every caller falls back
+# to ANONYMOUS, and the primary is refused every orchestration call with
+# "unauthenticated: anonymous may not SPAWN".
+# The daemon still starts, healthz still returns ok and the secrets still resolve - the only
+# symptom is that the fleet cannot be driven at all. Verified by bisecting the directives:
+#   no sandbox 3 lsof lines | ProtectSystem=strict 0 | ProtectHome=read-only 0
+#   ProtectKernelTunables 0 | ProtectControlGroups 0 | RestrictSUIDSGID 3 | NoNewPrivileges 3
+# The two below add no mount namespace and are safe.
 NoNewPrivileges=true
-PrivateTmp=true
-ProtectSystem=strict
-ProtectHome=read-write
-ProtectKernelTunables=true
-ProtectControlGroups=true
 RestrictSUIDSGID=true
 
 StandardOutput=journal

deploy/herdr-inner.sh

@@ -0,0 +1,19 @@
+#!/bin/zsh
+# fleetd #360 — template for the script deploy/herdr.service's ExecStart wraps in a pty.
+#
+# `script -qfec <this> /dev/null` needs a real command to run, and that command has to be a LOGIN
+# shell script: herdr itself needs the same secrets fleetd.service's login shell picks up (this
+# host: ~/.fleet/secrets.sh via ~/.zprofile), because members it spawns inherit its environment.
+# systemd's own Environment= lines in herdr.service are not enough for that -- they set TERM and a
+# bare PATH so the pty starts at all, nothing more.
+#
+# Copy this file to the path deploy/herdr.service's ExecStart names
+# (%h/LTMS/fleetd/fleetd-run/herdr-inner.sh by default) and `chmod +x` it. Not committed under
+# that path itself because the session name below is host-specific.
+
+# A 0x0 pty makes every pane spawn fail with "ghostty error -2" (see herdr-multi-instance-facts /
+# fleet01-headless-herdr-standup) -- give it a real size before herdr ever touches it.
+stty rows 50 cols 200
+
+# -l: login shell, so herdr and everything it spawns gets the real secrets and PATH.
+exec zsh -lc 'exec herdr --session <name>'

deploy/herdr.service

@@ -0,0 +1,40 @@
+# fleetd #360 — systemd unit for herdr (Linux), the terminal multiplexer fleetd drives.
+#
+# This is fleetd.service's companion: fleetd.service's After=/Wants=herdr.service assumes this
+# unit exists. Before this ticket it did not, so on a fresh host fleetd started against a herdr
+# that systemd never supervised at all.
+#
+# Install: see deploy/fleetd.service's header comment (both units install the same way).
+#
+# ExecStart below runs deploy/herdr-inner.sh (copy the template of that name from this directory
+# to the path in ExecStart, or point ExecStart at wherever you keep it, and make it executable).
+# It is a separate file rather than an inline command because it must itself be a login shell (see
+# its own header for why) and systemd's ExecStart does not run one.
+
+[Unit]
+Description=herdr terminal multiplexer (fleet session)
+Documentation=https://git.ltms.dev/fleet/fleetd/wiki
+
+[Service]
+Type=simple
+# script(1) gives herdr a real pty. Without it the client reports a 0x0 window and every pane
+# spawn fails with "ghostty error -2" -- which surfaces as a fleetd spawn failure, not a herdr one.
+ExecStart=/usr/bin/script -qfec %h/LTMS/fleetd/fleetd-run/herdr-inner.sh /dev/null
+StandardInput=null
+Environment=TERM=xterm-256color
+Environment=PATH=%h/.local/bin:/usr/local/bin:/usr/bin:/bin
+
+# PrivateTmp MUST stay false. fleetd writes the member ZDOTDIR scrub dir and the opencode config
+# dir under its own java.io.tmpdir, and the member pane -- a child of THIS process -- has to read
+# them. A private /tmp here silently breaks the credential scrub instead of failing loudly.
+PrivateTmp=false
+
+Restart=on-failure
+RestartSec=5s
+
+StandardOutput=journal
+StandardError=journal
+SyslogIdentifier=herdr
+
+[Install]
+WantedBy=default.target

docs/CB-5xx-Hardening.md

@@ -192,7 +192,7 @@ Deliberately small; every one maps to a failure mode we have actually hit.
 | `fleet_send_duration_seconds` | histogram | delegated turn latency |
 | `fleet_replies_total{path}` | counter | path ∈ rendezvous\|inbox — how often a reply strands (CB-307's whole reason to exist) |
 | `fleet_inbox_depth{target}` | gauge | undrained replies; steady-state should be 0 |
-| `fleet_push_nudges_total{outcome}` | counter | outcome ∈ delivered\|exhausted — a rising `exhausted` means the primary is not draining |
+| `fleet_push_nudges_total{outcome}` | counter | outcome ∈ sent\|exhausted — a rising `exhausted` means the primary is not draining. `sent` was called `delivered` until fleetd #365; it counts the herdr paste-and-submit call returning, never a confirmation the pane read it |
 | `fleet_spawns_total{kind,outcome}` | counter | outcome ∈ ready\|timeout\|guard_rejected; per peer kind (CB-402) |
 | `fleet_sessions{state}` | gauge | SPAWNING/READY/BUSY/DONE census |
 | `fleet_herdr_calls_total{method,outcome}` | counter | socket health — the dependency everything rests on |

fleetd/fleetd.example.yaml

@@ -110,6 +110,14 @@ bind:
 #   notifications:
 #     mode: disabled
 
+# Idle-sleep guard: while at least one member is live, hold an OS-level assertion against idle
+# sleep (macOS only — a `caffeinate -i` child; a no-op elsewhere or if caffeinate is missing), so
+# an unattended host does not idle-sleep out from under a member's long turn. Unlike health/
+# configReload above, this is ON BY DEFAULT — omitting the block entirely leaves it enabled, the
+# same as `enabled: true`. Uncomment only to turn it off:
+# idleSleepGuard:
+#   enabled: false
+
 # herdr Unix socket. Omit to use the client default
 # (${HERDR_SOCKET_PATH:-~/.config/herdr/herdr.sock}).
 herdrSocket: ~/.config/herdr/herdr.sock
@@ -774,6 +782,19 @@ guard:
 # so fleetd falls back to the weaker CB-596 sentinel overlay instead (a WARN names the gap).
 # worktreeGroup: fleet-workers
 
+# fleetd #362: a directory of skill folders (each a subdirectory holding a SKILL.md, the same
+# shape as this repo's own .claude/skills/) copied into every PROVISIONED worktree's
+# .claude/skills/, so a member spawned against ANY repo — not only one that already ships its own
+# copy — can load a bridge skill (e.g. implementer). Unset (the default): no worktree is touched
+# beyond today's behaviour. A skill folder the target repo already carries under
+# .claude/skills/<name> is never overwritten — the repo's own copy always wins. Claude Code
+# members only; an opencode member reads a different path (.opencode/agent) this key does not
+# touch. Best-effort like worktreeGroup above: a missing/unreadable directory here is logged and
+# skipped, never a failed spawn. Every non-hidden subdirectory of this directory is copied
+# wholesale, with no per-file allowlist — don't park scratch files or drafts alongside the real
+# skill folders, they will be copied into every provisioned worktree too.
+# memberSkills: /path/to/fleetd/checkout/.claude/skills
+
 # Session lifecycle limits (CB-303). All knobs are opt-in; omit or set to null to keep
 # the feature disabled. By default the daemon never reaps, caps, or drains sessions.
 #   idleTtlSeconds     → reap READY/DONE sessions idle longer than this (never BUSY/SPAWNING)
@@ -821,10 +842,17 @@ guard:
 #              across every daemon sharing this vhost.
 #   prefetch → consumer basicQos, capping how many unacked messages the mailbox holds in-heap.
 #              Default 32 when omitted.
+#   peers    → fleetd #361: the coord-ids of the OTHER daemons on this vhost, declared by the
+#              operator (the daemon never guesses). fleet_list reports each one's live reachability
+#              (a passive queue check, never a presence protocol) alongside this daemon's own
+#              mailbox state. Omit, or leave empty, for a daemon with no known peers yet — an
+#              undeclared peer can still reach you and be reached by fleet_send, it just will not
+#              show up as a row in fleet_list.
 # coordinator:
 #   uriEnv: LEAD_COORD_URI
 #   selfId: mac-opus
 #   prefetch: 32
+#   peers: [fleet01-lead]
 
 # Active push-to-primary (CB-307 Stage 3). When a worker reply lands with no open fleet_send,
 # the ReplyPushLoop injects a *drain nudge* (never the payload) into the primary's own herdr

fleetd/src/main/java/dev/ltms/fleet/Fleetd.java

@@ -55,6 +55,8 @@ import dev.ltms.fleet.member.MemberCredentialPolicyView;
 import dev.ltms.fleet.member.OpenCodeLauncher;
 import dev.ltms.fleet.placement.BackendOutagePolicy;
 import dev.ltms.fleet.placement.BackendQuarantine;
+import dev.ltms.fleet.power.CaffeinateSleepAssertionMechanism;
+import dev.ltms.fleet.power.IdleSleepGuard;
 import io.javalin.Javalin;
 import org.slf4j.Logger;
 import org.slf4j.LoggerFactory;
@@ -121,6 +123,11 @@ public final class Fleetd {
         // else can fail on a silently-empty one. A daemon started without a login shell (launchd)
         // boots fine either way — this is the only thing that says so out loud.
         reportRequiredSecrets(cfg);
+        // fleetd #377: the git host value a member receives as GITEA_HOST is often a full URL
+        // (scheme and trailing slash), not a host name. A member that assumes a bare host then
+        // builds https://https://... and the request never leaves the machine. Report the shape
+        // next to the secret report — shape only, never the value.
+        reportGitHostShape(cfg);
         reportMemberTrustModel(cfg);
         // CB-596: an absent (or empty) memberCredentials: block blocks NOTHING — no credential
         // name is hardcoded any more to fall back on. Say so loudly, the same way a missing
@@ -248,10 +255,31 @@ public final class Fleetd {
             contextCap = cfg.lifecycle().contextCap();
         }
         boolean clearAfterTurn = cfg.lifecycle() != null && cfg.lifecycle().clearAfterTurn();
-        SessionManager sessions = new SessionManager(workers, new GitWorktrees(cfg.worktreeRoot(), cfg.worktreeGroup()),
+        SessionManager sessions = new SessionManager(workers,
+                new GitWorktrees(cfg.worktreeRoot(), cfg.worktreeGroup(), cfg.memberSkills()),
                 System::nanoTime, contextCap, clearAfterTurn);
         liveCountRef.set(profileName -> liveSessionCount(sessions.roster(), profileName));
 
+        // Idle-sleep guard: hold an OS-level assertion against idle sleep while at least one
+        // member is live, so an unattended host does not idle-sleep out from under a member's
+        // long turn (see FleetConfig.IdleSleepGuard / dev.ltms.fleet.power.IdleSleepGuard for the
+        // measurement that motivated this). Opt-out via idleSleepGuard.enabled: false; on by
+        // default. Hangs off SessionManager's own onAcquire/onRelease hooks (CB-520/CB-516,
+        // previously wired only to the reply inbox) and SessionManager#size() — the exact registry
+        // fleet_list's live/capacity numbers are themselves computed from — rather than tracking
+        // members a second way. No-op (never constructed) off macOS or when idleSleepGuard.enabled
+        // is explicitly false; the mechanism itself is additionally a no-op if 'caffeinate' cannot
+        // be started, so this can never fail a spawn, a release, or startup.
+        boolean idleSleepGuardEnabled = cfg.idleSleepGuard() == null || cfg.idleSleepGuard().isEnabled();
+        final IdleSleepGuard idleSleepGuard;
+        if (idleSleepGuardEnabled) {
+            idleSleepGuard = new IdleSleepGuard(new CaffeinateSleepAssertionMechanism(), sessions::size);
+            sessions.onAcquire(_ -> idleSleepGuard.recheck());
+            sessions.onRelease(_ -> idleSleepGuard.recheck());
+        } else {
+            idleSleepGuard = null;
+        }
+
         // CB-303 part 1: idle-ttl reaper — only when configured, defaults to disabled.
         final SessionReaper reaper;
         if (cfg.lifecycle() != null
@@ -556,8 +584,12 @@ public final class Fleetd {
         if (cfg.health() != null && cfg.health().isEnabled()) {
             // CB-580: a member found GONE/NEVER_READY must fail whatever ticket is waiting on it,
             // through the same idempotent target-wide operation CB-516 already uses on release.
+            // fleetd #386: System::nanoTime freezes across a macOS sleep, so the stall check also
+            // gets a wall-clock source to detect and correct for that freeze. Every other decision
+            // in FleetHealthMonitor stays on the monotonic clock, unchanged.
             healthMonitor = new FleetHealthMonitor(agents, sessions::roster, messages, healthScheduler,
-                    System::nanoTime, cfg.health().intervalOrDefault(),
+                    System::nanoTime, () -> TimeUnit.MILLISECONDS.toNanos(System.currentTimeMillis()),
+                    cfg.health().intervalOrDefault(),
                     cfg.health().workingSuspectAfterOrDefault(), messages::abandon);
             String coverage = FleetHealthMonitor.coverage(true,
                     cfg.health().notifications() != null && cfg.health().notifications().configured());
@@ -652,7 +684,12 @@ public final class Fleetd {
                 quarantineSource,
                 leadMailbox,
                 outageSource,
-                new FleetMcp.LeadSeatSource(leadSeatLookup(() -> config.get().profiles(), leaders, leads)));
+                new FleetMcp.LeadSeatSource(leadSeatLookup(() -> config.get().profiles(), leaders, leads)),
+                // fleetd #361: the operator-declared peers this daemon's fleet_list should try to
+                // reach. Read from the SAME snapshot leadMailbox itself opened from (cfg.coordinator()),
+                // not the live config.get() — coordinator wiring is already boot-time-fixed (see
+                // leadMailbox above), so peers follows the same rule rather than half hot-reloading.
+                cfg.coordinator() == null ? List.of() : cfg.coordinator().peers());
 
         // CB-637: the receive half. Only constructed when a lead mailbox actually opened — with no
         // coordinator (or an unreachable one) there is nothing to deliver, so no scheduler is
@@ -698,6 +735,11 @@ public final class Fleetd {
             if (configWatcher != null) configWatcher.stop(); // CB-559: stop polling the config file
             mcp.close();
             if (reaper != null) reaper.stop();
+            // Idle-sleep guard: release unconditionally, even though sessions.close() above already
+            // drained every session (and each release already drove the live count to 0, which
+            // releases the guard's assertion on its own) — this is the backstop for a drain that was
+            // itself interrupted or threw, so no caffeinate child ever outlives the daemon.
+            if (idleSleepGuard != null) idleSleepGuard.close();
             // Release the broker connection last among message resources (no-op for the in-memory inbox).
             if (replyInbox instanceof AutoCloseable closeable) {
                 try {
@@ -1162,6 +1204,76 @@ public final class Fleetd {
         });
     }
 
+    /**
+     * fleetd #377: the env var names holding the git host value that members receive as
+     * {@code GITEA_HOST}. {@code HerdrPeerLauncher.applyGitToken} injects {@code GITEA_HOST}
+     * only for profiles that opted in via {@code gitTokenEnv} (CB-302), reading the value from
+     * that profile's {@code gitHostEnv} (default {@code GITEA_HOST}), so the shape only matters
+     * where a git token is opted in. A var used by more than one profile is one entry naming
+     * every profile that reads it, the same shape as {@link #requiredSecretEnvVars}.
+     *
+     * <p>Package-private and pure (no I/O, no logging) so the derivation is unit-testable
+     * without capturing log output; {@link #reportGitHostShape(FleetConfig)} is the logging caller.
+     */
+    static Map<String, List<String>> gitHostEnvVars(FleetConfig cfg) {
+        Map<String, List<String>> hostsBy = new LinkedHashMap<>();
+        cfg.profiles().forEach((name, profile) -> {
+            if (profile.hasGitToken()) {
+                hostsBy.computeIfAbsent(profile.gitHostEnv(), _ -> new ArrayList<>())
+                        .add("profile '" + name + "' gitHostEnv");
+            }
+        });
+        return hostsBy;
+    }
+
+    /**
+     * True when the value already starts with a URI scheme ({@code https://...}, {@code
+     * http://...}). A bare host name and a host:port must both report {@code false} — the shape
+     * this ticket exists for is a value that <em>looks like</em> a host but is a full URL, and
+     * confusing those in the report would move the failure to the log instead of the network.
+     */
+    static boolean startsWithScheme(String value) {
+        return value.matches("[A-Za-z][A-Za-z0-9+.-]*://.*");
+    }
+
+    /**
+     * fleetd #377: log, on the same startup path as {@link #reportRequiredSecrets}, the SHAPE of
+     * each git host value that members receive as {@code GITEA_HOST}: set or unset, its length,
+     * whether it starts with a scheme, whether it ends with a slash. Never the value itself — the
+     * same discipline as {@link #reportRequiredSecrets}, which logs by name only. Either shape is
+     * legitimate: the value is passed to members unchanged, and a line that quietly rewrites it
+     * would change what works on one host and breaks on another. The shape line only tells the
+     * operator which URL form to expect from a member that builds on {@code GITEA_HOST}. An
+     * unset variable is logged at INFO — useful information, not an error — and the daemon
+     * starts on either way.
+     *
+     * <p>The env read lives in the overload below so a test can drive the line with a known
+     * value and prove that value never reaches the log.
+     */
+    static void reportGitHostShape(FleetConfig cfg) {
+        reportGitHostShape(cfg, System.getenv());
+    }
+
+    static void reportGitHostShape(FleetConfig cfg, Map<String, String> env) {
+        Map<String, List<String>> hostsBy = gitHostEnvVars(cfg);
+        if (hostsBy.isEmpty()) {
+            log.info("startup git host: no profile sets a gitTokenEnv — nothing to check");
+            return;
+        }
+        hostsBy.forEach((varName, sources) -> {
+            String value = env.get(varName);
+            if (value == null || value.isBlank()) {
+                log.info("startup git host {}: unset ({}) — a member gets GITEA_TOKEN but no "
+                        + "GITEA_HOST value", varName, String.join(", ", sources));
+            } else {
+                log.info("startup git host {}: set ({}) — length={}, startsWithScheme={}, "
+                                + "trailingSlash={}",
+                        varName, String.join(", ", sources),
+                        value.length(), startsWithScheme(value), value.endsWith("/"));
+            }
+        });
+    }
+
     /**
      * fleetd #184: state the member trust model at startup. Environment controls and worktrees do
      * not make a sandbox when fleetd and its members use the same OS user. A separate herdr may

fleetd/src/main/java/dev/ltms/fleet/config/ConfigRef.java

@@ -37,12 +37,17 @@ import java.util.function.Supplier;
  *       makes {@code fleet:} split rather than hot — see below.</li>
  *   <li><strong>Deferred</strong> — accepted into the new snapshot, but the wiring built at startup
  *       keeps the old value until a restart: {@code lifecycle:}, {@code leadHeartbeat:},
+ *       {@code idleSleepGuard:} ({@code Fleetd.java} reads it once, at startup, to decide whether
+ *       to construct an {@code IdleSleepGuard} and wire {@code SessionManager}'s
+ *       {@code onAcquire}/{@code onRelease} hooks to it — neither is rebuilt on reload, so a
+ *       running daemon keeps whatever this was at startup regardless of a later edit),
  *       {@code spawnReadyTimeoutMs} / {@code spawnReadyPollMs}, {@code quarantineCooldownSeconds}
  *       (CB-578 stage B — baked once into the {@code BackendQuarantine} built at startup),
- *       {@code guard:}, {@code worktreeRoot:} and {@code worktreeGroup:} (both baked once into the
- *       {@code GitWorktrees} built at {@code Fleetd.java:251} and never rebuilt — fleetd #323
- *       instance 2 found {@code worktreeGroup} missing from this list and from
- *       {@link #changedDeferredKeys}), {@code primary:} (fleetd #326 — {@code Fleetd.java:506, 519,
+ *       {@code guard:}, {@code worktreeRoot:}, {@code worktreeGroup:} and {@code memberSkills:}
+ *       (all three of the latter baked once into the {@code GitWorktrees} built at
+ *       {@code Fleetd.java:251} and never rebuilt — fleetd #323 instance 2 found
+ *       {@code worktreeGroup} missing from this list and from {@link #changedDeferredKeys};
+ *       {@code memberSkills} (fleetd #362) followed the same shape), {@code primary:} (fleetd #326 — {@code Fleetd.java:506, 519,
  *       520} read {@code cfg.primary()} only off the startup snapshot to build {@code
  *       PrimaryRegistry} and size {@code ReplyPushLoop}'s reminder cap/backoff, and neither is
  *       rebuilt on reload. Say the consequence exactly: {@code primary.terminal} is DEPRECATED
@@ -129,8 +134,9 @@ import java.util.function.Supplier;
  *       five of COLD_KEYS" rather than re-listing them, so prose and set cannot drift again.</li>
  * </ul>
  *
- * <p><strong>The denominator, measured on 2026-09-04 (fleetd #330; recounted for fleetd #333).</strong>
- * {@code FleetConfig} has 22 top-level record components: 5 cold, 11 deferred, 3 split, 3
+ * <p><strong>The denominator, measured on 2026-09-04 (fleetd #330; recounted for fleetd #333);
+ * recounted again for fleetd #362, and again after {@code idleSleepGuard:} was added.</strong>
+ * {@code FleetConfig} has 24 top-level record components: 5 cold, 13 deferred, 3 split, 3
  * hot-excluded. Three of them are named nowhere in this file, and the reason is the same for all
  * three: {@code placement}, {@code memberCredentials} and {@code memberLoginShell} are
  * <strong>hot</strong> and correctly absent — all three are read live off {@code config.get()}
@@ -211,9 +217,9 @@ public final class ConfigRef implements Supplier<FleetConfig> {
      * read {@link #COLD_KEYS} and {@link #SPLIT_KEYS}.
      */
     static final Set<String> DEFERRED_KEYS = Set.of(
-            "guard", "worktreeRoot", "worktreeGroup", "primary", "configReload",
+            "guard", "worktreeRoot", "worktreeGroup", "memberSkills", "primary", "configReload",
             "leadHeartbeat", "lifecycle", "spawnReadyTimeoutMs", "spawnReadyPollMs",
-            "quarantineCooldownSeconds", "profiles");
+            "quarantineCooldownSeconds", "profiles", "idleSleepGuard");
 
     private final Path path;
     private final AtomicReference<FleetConfig> current;
@@ -402,6 +408,13 @@ public final class ConfigRef implements Supplier<FleetConfig> {
         if (!Objects.equals(old.worktreeGroup(), fresh.worktreeGroup())) {
             changed.add("worktreeGroup");
         }
+        // fleetd #362: baked into the same GitWorktrees as worktreeRoot/worktreeGroup
+        // (Fleetd.java:251) and never rebuilt either — a reload that changes only memberSkills
+        // must be reported the same way, or a newly provisioned worktree keeps seeding from (or
+        // skipping) the old source directory with nothing telling the operator why.
+        if (!Objects.equals(old.memberSkills(), fresh.memberSkills())) {
+            changed.add("memberSkills");
+        }
         // fleetd #326: Fleetd.java:506, 519, 520 read cfg.primary() only off the startup snapshot
         // (PrimaryRegistry's pinned terminal, ReplyPushLoop's reminder cap and backoff) — neither is
         // rebuilt on reload, so a changed value needs a restart. Note what it does NOT mean:
@@ -418,6 +431,14 @@ public final class ConfigRef implements Supplier<FleetConfig> {
         if (!Objects.equals(old.configReload(), fresh.configReload())) {
             changed.add("configReload");
         }
+        // Fleetd.java reads cfg.idleSleepGuard() once, at startup, to decide whether to construct
+        // an IdleSleepGuard at all and wire SessionManager's onAcquire/onRelease hooks to it —
+        // neither is rebuilt on reload, so a running daemon keeps whatever this was at startup
+        // (armed or not) regardless of a later edit here. Not cold: nothing already-open goes
+        // inconsistent with the new value, an armed-or-not guard just keeps its original answer.
+        if (!Objects.equals(old.idleSleepGuard(), fresh.idleSleepGuard())) {
+            changed.add("idleSleepGuard");
+        }
         if (!Objects.equals(old.spawnReadyTimeoutMs(), fresh.spawnReadyTimeoutMs())
                 || !Objects.equals(old.spawnReadyPollMs(), fresh.spawnReadyPollMs())) {
             changed.add("spawnReady*");

fleetd/src/main/java/dev/ltms/fleet/config/FleetConfig.java

@@ -106,6 +106,24 @@ import java.util.regex.PatternSyntaxException;
  *                      When {@code memberHerdrSocket} is NOT configured this field is never
  *                      consulted at all; fleetd keeps reading its own {@code $SHELL}, exactly as
  *                      before this field existed.
+ * @param memberSkills  fleetd #362: nullable directory of skill folders (each a subdirectory
+ *                      holding a {@code SKILL.md}, the same shape as this repo's own {@code
+ *                      .claude/skills/}) copied into every provisioned worktree's {@code
+ *                      .claude/skills/}, so a member spawned against ANY repo — not only one that
+ *                      already ships its own copy — can load a bridge skill such as {@code
+ *                      implementer}. {@code null}/blank ⇒ off: no worktree is touched beyond
+ *                      today's behaviour. A skill folder the target repo already carries is never
+ *                      overwritten — see {@link dev.ltms.fleet.session.GitWorktrees}. Claude Code
+ *                      members only; an opencode member's equivalent lives under a different path
+ *                      ({@code .opencode/agent}) and is not covered by this key. Every non-hidden
+ *                      subdirectory of this directory is copied wholesale, with no per-file
+ *                      allowlist — do not park scratch files or drafts alongside the real skill
+ *                      folders, they will be copied into every provisioned worktree too.
+ * @param idleSleepGuard opt-in-by-default: hold an OS-level assertion against idle sleep while at
+ *                      least one member is live, so an unattended host does not sleep out from
+ *                      under a member's long turn. {@code null} (the block omitted) behaves the
+ *                      same as an explicit {@code enabled: true}; set {@code enabled: false} to
+ *                      turn it off. See {@link dev.ltms.fleet.power.IdleSleepGuard}.
  */
 @JsonIgnoreProperties(ignoreUnknown = true)
 public record FleetConfig(
@@ -130,7 +148,37 @@ public record FleetConfig(
         MemberCredentials memberCredentials,
         Coordinator coordinator,
         String worktreeGroup,
-        String memberLoginShell) {
+        String memberLoginShell,
+        String memberSkills,
+        IdleSleepGuard idleSleepGuard) {
+
+    /** Back-compat form before the {@code idleSleepGuard:} block was added. */
+    public FleetConfig(Bind bind, String herdrSocket, String memberHerdrSocket, Map<String, Profile> profiles,
+                         Guard guard, String worktreeRoot, Lifecycle lifecycle, Integer spawnReadyTimeoutMs,
+                         Integer spawnReadyPollMs, Broker broker, Primary primary, Fleet fleet,
+                         LeadHeartbeat leadHeartbeat, Health health, String placement, Auth auth,
+                         ConfigReload configReload, Integer quarantineCooldownSeconds,
+                         MemberCredentials memberCredentials, Coordinator coordinator, String worktreeGroup,
+                         String memberLoginShell, String memberSkills) {
+        this(bind, herdrSocket, memberHerdrSocket, profiles, guard, worktreeRoot, lifecycle, spawnReadyTimeoutMs,
+                spawnReadyPollMs, broker, primary, fleet, leadHeartbeat, health, placement, auth,
+                configReload, quarantineCooldownSeconds, memberCredentials, coordinator, worktreeGroup,
+                memberLoginShell, memberSkills, null);
+    }
+
+    /** Back-compat form before the {@code memberSkills} key was added. */
+    public FleetConfig(Bind bind, String herdrSocket, String memberHerdrSocket, Map<String, Profile> profiles,
+                         Guard guard, String worktreeRoot, Lifecycle lifecycle, Integer spawnReadyTimeoutMs,
+                         Integer spawnReadyPollMs, Broker broker, Primary primary, Fleet fleet,
+                         LeadHeartbeat leadHeartbeat, Health health, String placement, Auth auth,
+                         ConfigReload configReload, Integer quarantineCooldownSeconds,
+                         MemberCredentials memberCredentials, Coordinator coordinator, String worktreeGroup,
+                         String memberLoginShell) {
+        this(bind, herdrSocket, memberHerdrSocket, profiles, guard, worktreeRoot, lifecycle, spawnReadyTimeoutMs,
+                spawnReadyPollMs, broker, primary, fleet, leadHeartbeat, health, placement, auth,
+                configReload, quarantineCooldownSeconds, memberCredentials, coordinator, worktreeGroup,
+                memberLoginShell, null, null);
+    }
 
     /** Back-compat form before the {@code memberLoginShell} key was added. */
     public FleetConfig(Bind bind, String herdrSocket, String memberHerdrSocket, Map<String, Profile> profiles,
@@ -141,7 +189,7 @@ public record FleetConfig(
                          MemberCredentials memberCredentials, Coordinator coordinator, String worktreeGroup) {
         this(bind, herdrSocket, memberHerdrSocket, profiles, guard, worktreeRoot, lifecycle, spawnReadyTimeoutMs,
                 spawnReadyPollMs, broker, primary, fleet, leadHeartbeat, health, placement, auth,
-                configReload, quarantineCooldownSeconds, memberCredentials, coordinator, worktreeGroup, null);
+                configReload, quarantineCooldownSeconds, memberCredentials, coordinator, worktreeGroup, null, null);
     }
 
     /** Back-compat form before the {@code worktreeGroup} key was added. */
@@ -888,12 +936,18 @@ public record FleetConfig(
      *                 {@code null} ⇒ kept as {@code null} (no self id configured).
      * @param prefetch the consumer's {@code basicQos} prefetch count. {@code null}/non-positive ⇒
      *                 {@link LeadMailbox#DEFAULT_PREFETCH}.
+     * @param peers    fleetd #361: the coord-ids the operator declares as this daemon's peers — the
+     *                 daemon never guesses who else exists. {@code fleet_list} reports each one's
+     *                 live reachability. Blank entries are dropped; {@code null} ⇒ an empty list, so
+     *                 a config written before this field existed still parses unchanged.
      */
     @JsonIgnoreProperties(ignoreUnknown = true)
-    public record Coordinator(String uri, String uriEnv, String selfId, Integer prefetch) {
+    public record Coordinator(String uri, String uriEnv, String selfId, Integer prefetch, List<String> peers) {
 
         public Coordinator {
             selfId = (selfId == null || selfId.isBlank()) ? null : selfId;
+            peers = peers == null ? List.of()
+                    : peers.stream().filter(p -> p != null && !p.isBlank()).toList();
         }
 
         /** True when a {@code uriEnv} is configured by name, whether or not its variable resolves. */
@@ -1245,6 +1299,25 @@ public record FleetConfig(
         }
     }
 
+    /**
+     * Hold an OS-level assertion against idle sleep while at least one member is live (see
+     * {@link dev.ltms.fleet.power.IdleSleepGuard}).
+     *
+     * <p>Unlike most opt-in blocks in this file, this one defaults to <em>on</em>: an unattended
+     * host idle-sleeping mid-turn is a correctness problem (a dropped AMQP link, a frozen member),
+     * not a convenience, so the safer default is armed. An operator who wants the previous
+     * behaviour (no assertion held, ever) sets {@code enabled: false} explicitly.
+     *
+     * @param enabled {@code false} turns the guard off; {@code null} (the block omitted
+     *                entirely) or {@code true} leaves it on
+     */
+    @JsonIgnoreProperties(ignoreUnknown = true)
+    public record IdleSleepGuard(Boolean enabled) {
+        public boolean isEnabled() {
+            return !Boolean.FALSE.equals(enabled);
+        }
+    }
+
     /**
      * The terminal → lead-name map seeded from the legacy singular {@code primary:} pin (CB-530).
      *
@@ -1495,7 +1568,8 @@ public record FleetConfig(
             "bind", "herdrSocket", "memberHerdrSocket", "profiles", "guard", "worktreeRoot",
             "lifecycle", "spawnReadyTimeoutMs", "spawnReadyPollMs", "broker", "primary", "fleet",
             "leadHeartbeat", "health", "placement", "auth", "configReload", "quarantineCooldownSeconds",
-            "memberCredentials", "coordinator", "worktreeGroup", "memberLoginShell");
+            "memberCredentials", "coordinator", "worktreeGroup", "memberLoginShell", "memberSkills",
+            "idleSleepGuard");
 
     /** Load and validate config from {@code path}. */
     public static FleetConfig load(Path path) {
@@ -2172,9 +2246,18 @@ public record FleetConfig(
         // memberLoginShell is left as-is (fleetd #213), like worktreeGroup: null/blank is "not
         // configured", and there is no sane non-null default — a member's login shell is
         // operator-specific and only meaningful when memberHerdrSocket is also set.
+        // memberSkills is left as-is (fleetd #362), like worktreeGroup/memberLoginShell: null/blank
+        // is "off", and there is no sane non-null default — the daemon may not even run from a
+        // checkout that ships its own .claude/skills/.
+        // idleSleepGuard is left as-is, like leadHeartbeat/configReload above, but for the opposite
+        // reason: it is on by default already (its own isEnabled() treats null the same as
+        // enabled: true — see its javadoc), so defaulting the block here would change nothing a
+        // reader observes and would only obscure that "block omitted" and "block present and
+        // enabled" are deliberately the same outcome.
         return new FleetConfig(b, herdrSocket, memberHerdrSocket, profiles, g, worktreeRoot, l, timeout, pollMs,
                 broker, primary, f, leadHeartbeat, health, placementOrDefault, a, configReload,
-                quarantineCooldown, mc, coordinator, worktreeGroup, memberLoginShell);
+                quarantineCooldown, mc, coordinator, worktreeGroup, memberLoginShell, memberSkills,
+                idleSleepGuard);
     }
 
     /**

fleetd/src/main/java/dev/ltms/fleet/health/FleetHealthMonitor.java

@@ -38,15 +38,46 @@ public final class FleetHealthMonitor {
      */
     static final long ASK_LAPSE_RECHECK_DELAY_SECONDS = 120;
 
+    /**
+     * fleetd #386: {@code System.nanoTime()} (or whatever {@link #clock} is) does not advance while
+     * macOS sleeps, so a raw {@code nowNanos - lastActivityAtNanos} comparison freezes with the
+     * host and can never cross {@link #workingSuspectAfterNanos}. This is a second, wall-clock
+     * source used ONLY inside the stall check ({@link #stallElapsedNanos}) to detect and correct
+     * for that freeze. Nothing else in this class reads it — every other decision (readiness grace,
+     * the fault classification itself) stays exactly on {@link #clock}, as the ticket requires.
+     */
+    private static final LongSupplier DEFAULT_REALTIME_CLOCK =
+            () -> TimeUnit.MILLISECONDS.toNanos(System.currentTimeMillis());
+
     private final AgentControl agents;
     private final Supplier<List<MemberSession>> roster;
     private final MessageService messages;
     private final ScheduledExecutorService scheduler;
     private final LongSupplier clock;
+    private final LongSupplier realtimeClock;
     private final long intervalSeconds;
+    private final long tickIntervalNanos;
     private final long workingSuspectAfterNanos;
     private final BiConsumer<String, String> failTarget;
     private final Map<String, HealthPrior> priors = new HashMap<>();
+    /**
+     * fleetd #386 clock-drift bookkeeping. {@code haveClockBaseline}/{@code lastTickMonoNanos}/
+     * {@code lastTickRealNanos} track the previous tick's pair of readings so each new tick can
+     * measure how far the two clocks moved apart since then. {@code accumulatedDriftNanos} is the
+     * running total of every such divergence observed since this monitor started (never decreases —
+     * the monotonic clock can only lag real time, never lead it). {@code busyDriftBaselineNanos}/
+     * {@code busyBaselineActivityNanos} record, per target, the value of {@code accumulatedDriftNanos}
+     * at the moment this monitor first saw that target's CURRENT {@code lastActivityAtNanos} while
+     * BUSY — so {@link #stallElapsedNanos} adds back only the drift observed DURING this BUSY span,
+     * never drift from a sleep that happened before the member went busy. All five fields are touched
+     * only from {@code tick()}, like {@link #priors}.
+     */
+    private boolean haveClockBaseline = false;
+    private long lastTickMonoNanos;
+    private long lastTickRealNanos;
+    private long accumulatedDriftNanos = 0;
+    private final Map<String, Long> busyDriftBaselineNanos = new HashMap<>();
+    private final Map<String, Long> busyBaselineActivityNanos = new HashMap<>();
     /**
      * The live classification per member, and the only one of this class's three maps that more
      * than one scheduler task touches. {@code tick} writes it (and prunes it to the roster);
@@ -88,12 +119,29 @@ public final class FleetHealthMonitor {
     public FleetHealthMonitor(AgentControl agents, Supplier<List<MemberSession>> roster, MessageService messages,
                               ScheduledExecutorService scheduler, LongSupplier clock, long intervalSeconds,
                               long workingSuspectAfterSeconds, BiConsumer<String, String> failTarget) {
+        this(agents, roster, messages, scheduler, clock, DEFAULT_REALTIME_CLOCK, intervalSeconds,
+                workingSuspectAfterSeconds, failTarget);
+    }
+
+    /**
+     * @param realtimeClock fleetd #386: a wall-clock nanosecond source (e.g.
+     *                       {@code System.currentTimeMillis()} converted to nanos) that keeps
+     *                       advancing while {@code clock} is frozen by a host sleep. Used only to
+     *                       correct the stall check — see the class-level javadoc on the
+     *                       clock-drift fields.
+     */
+    public FleetHealthMonitor(AgentControl agents, Supplier<List<MemberSession>> roster, MessageService messages,
+                              ScheduledExecutorService scheduler, LongSupplier clock, LongSupplier realtimeClock,
+                              long intervalSeconds, long workingSuspectAfterSeconds,
+                              BiConsumer<String, String> failTarget) {
         this.agents = agents;
         this.roster = roster;
         this.messages = messages;
         this.scheduler = scheduler;
         this.clock = clock;
+        this.realtimeClock = Objects.requireNonNull(realtimeClock, "realtimeClock");
         this.intervalSeconds = intervalSeconds;
+        this.tickIntervalNanos = TimeUnit.SECONDS.toNanos(intervalSeconds);
         this.workingSuspectAfterNanos = TimeUnit.SECONDS.toNanos(workingSuspectAfterSeconds);
         this.failTarget = Objects.requireNonNull(failTarget, "failTarget");
     }
@@ -123,6 +171,7 @@ public final class FleetHealthMonitor {
             for (Agent agent : agentsNow) live.put(agent.terminalId(), agent);
             HashSet<String> current = new HashSet<>();
             long nowNanos = clock.getAsLong();
+            long driftBeforeThisTick = observeClockDrift(nowNanos);
             for (MemberSession session : rosterNow) {
                 current.add(session.terminalId());
                 Agent agent = live.get(session.terminalId());
@@ -133,7 +182,7 @@ public final class FleetHealthMonitor {
                         && session.state() != MemberSession.State.SPAWNING;
                 boolean readinessGraceElapsed = nowNanos - session.spawnedAtNanos() >= READINESS_GRACE_NANOS;
                 boolean stalled = session.state() == MemberSession.State.BUSY
-                        && nowNanos - session.lastActivityAtNanos() >= workingSuspectAfterNanos;
+                        && stallElapsedNanos(session, nowNanos, driftBeforeThisTick) >= workingSuspectAfterNanos;
                 // CB-643: the three message-layer facts CB-640 published. Read them here rather than
                 // leaving them false — that constant is what made 8 of the 9 fault states dead.
                 boolean queuedDelivery = messages.hasQueuedDelivery(session.terminalId());
@@ -151,6 +200,8 @@ public final class FleetHealthMonitor {
             priors.keySet().retainAll(current);
             states.keySet().retainAll(current);
             orphanStreaks.keySet().retainAll(current);
+            busyDriftBaselineNanos.keySet().retainAll(current);
+            busyBaselineActivityNanos.keySet().retainAll(current);
         } catch (Throwable error) {
             // Any unclassified collection failure must never kill the monitor's only scheduler task.
             log.warn("fleet health collection failed; will retry next tick", error);
@@ -175,6 +226,65 @@ public final class FleetHealthMonitor {
         return streak >= ORPHAN_CONFIRM_TICKS;
     }
 
+    /**
+     * fleetd #386: compare this tick's monotonic and real-time readings against the previous
+     * tick's, and fold any positive divergence into {@link #accumulatedDriftNanos} (a ratchet — it
+     * never decreases, since the monotonic clock can only fall behind real time, never ahead of
+     * it). Logs once, at WARN, when that single tick's divergence exceeds one full tick interval —
+     * the signature of a host that slept between the two ticks (a tick literally cannot run while
+     * the process itself is suspended, so the whole sleep duration lands inside one tick's gap).
+     *
+     * @return {@link #accumulatedDriftNanos} as it stood BEFORE this tick's divergence was folded
+     *         in — the baseline {@link #stallElapsedNanos} needs when a target is observed BUSY
+     *         for the first time this tick, so a sleep that happened before this member went busy
+     *         is not attributed to it.
+     */
+    private long observeClockDrift(long nowNanos) {
+        long nowRealNanos = realtimeClock.getAsLong();
+        long driftBeforeThisTick = accumulatedDriftNanos;
+        if (haveClockBaseline) {
+            long monoDelta = nowNanos - lastTickMonoNanos;
+            long realDelta = nowRealNanos - lastTickRealNanos;
+            long tickDrift = realDelta - monoDelta;
+            if (tickDrift > tickIntervalNanos) {
+                log.warn("fleet health: the monotonic clock did not advance for about {}s that the "
+                        + "real clock did since the last tick (host likely slept); the stall "
+                        + "detector could not see that time", TimeUnit.NANOSECONDS.toSeconds(tickDrift));
+            }
+            if (tickDrift > 0) {
+                accumulatedDriftNanos = driftBeforeThisTick + tickDrift;
+            }
+        }
+        lastTickMonoNanos = nowNanos;
+        lastTickRealNanos = nowRealNanos;
+        haveClockBaseline = true;
+        return driftBeforeThisTick;
+    }
+
+    /**
+     * fleetd #386: {@code nowNanos - lastActivityAtNanos} alone freezes across a host sleep, since
+     * both come from the monotonic {@link #clock}. This adds back the real-time drift observed
+     * since this BUSY span started — not the monitor's whole lifetime, so a sleep that happened
+     * before this member went busy never leaks into its stall reading (see the class-level javadoc
+     * on the drift fields). The baseline resets whenever {@code lastActivityAtNanos} changes (a new
+     * turn) or the member is not currently BUSY.
+     */
+    private long stallElapsedNanos(MemberSession session, long nowNanos, long driftBeforeThisTick) {
+        String target = session.terminalId();
+        if (session.state() != MemberSession.State.BUSY) {
+            busyDriftBaselineNanos.remove(target);
+            busyBaselineActivityNanos.remove(target);
+            return nowNanos - session.lastActivityAtNanos();
+        }
+        Long baselineActivity = busyBaselineActivityNanos.get(target);
+        if (baselineActivity == null || baselineActivity != session.lastActivityAtNanos()) {
+            busyBaselineActivityNanos.put(target, session.lastActivityAtNanos());
+            busyDriftBaselineNanos.put(target, driftBeforeThisTick);
+        }
+        long driftSinceBusyStart = accumulatedDriftNanos - busyDriftBaselineNanos.get(target);
+        return (nowNanos - session.lastActivityAtNanos()) + driftSinceBusyStart;
+    }
+
     void reportTransition(String target, HealthState next) {
         HealthState previous = states.put(target, next);
         if (previous == next) return;

fleetd/src/main/java/dev/ltms/fleet/herdr/LeadTabScanner.java

@@ -5,6 +5,7 @@ import org.slf4j.Logger;
 import org.slf4j.LoggerFactory;
 
 import java.util.Collections;
+import java.util.HashSet;
 import java.util.LinkedHashMap;
 import java.util.Locale;
 import java.util.Map;
@@ -53,17 +54,40 @@ import java.util.function.Supplier;
  * daemon and found again by this scan. The trust direction above is unaffected — fleetd writing a
  * name for a lead it just started is not a pane promoting itself — but <em>staleness</em> becomes
  * real: a label left behind by a session that has since died would read as a live lead forever.
- * This scanner does not solve that (its job is naming, and a stale name costs nothing here); the
- * launcher does, by requiring a running agent in the tab before it counts the lead as live. If you
- * ever make a decision that <em>removes</em> something based on this map, add the same check.
  * The remaining hazard is an <em>operator</em> one — a worker {@code tabLabel} template that
  * happens to start with the same prefix would promote the whole fleet — and that is refused at
  * startup by {@code FleetConfig.validateLeadTabPrefixes} rather than documented here.
  *
+ * <p><strong>fleetd #359 — the staleness check this class used to skip.</strong> This used to say
+ * "a stale name costs nothing here" and leave liveness to {@code LeadLauncher}, on the theory that
+ * naming and removing are different decisions. That was wrong: {@code dev.ltms.fleet.msg.LeadCoordLoop}
+ * makes exactly the kind of removal decision the old javadoc warned about, by reading this map to
+ * pick which pane a peer message goes into — and a stale entry there is not free. On a host where
+ * {@code fleetd} had restarted more than once, a labelled-but-dead tab from a previous life was
+ * reported right alongside the live one; {@code LeadCoordLoop.resolveLocalLead()} saw more than one
+ * candidate and refused to guess (safe), but the fix the daemon's own WARN suggests — name a lead
+ * after {@code coordinator.selfId} — stops being safe once two tabs can share a label: step 1 of
+ * that resolution picks whichever matching entry it finds first, which can be the dead one, and
+ * typing a peer's message into a dead shell does not fail — it is silently gone instead of merely
+ * held. {@link #scan()} now cross-checks every labelled tab against {@code agent.list} (the same
+ * signal {@code LeadLauncher.countLeads} already trusts for the same purpose) and drops any tab
+ * with no agent running in it, so a dead tab is never in the map for a caller to pick at all.
+ *
  * <p><strong>Caching.</strong> {@link #get()} is on the request path (every resolve), so the scan
- * is TTL-cached and a stale-but-valid map is preferred to a herdr round-trip. A failed scan keeps
- * the previous answer instead of emptying it — a herdr hiccup must not silently demote a live lead
- * mid-session.
+ * is TTL-cached and a stale-but-valid map is preferred to a herdr round-trip. A failed scan (herdr
+ * throws) keeps the previous answer instead of emptying it — a herdr hiccup must not silently
+ * demote a live lead mid-session.
+ *
+ * <p><strong>fleetd #359 review, finding 2 — a successful-but-wrong scan is the same hazard.</strong>
+ * The catch above only fires when a call throws. It does nothing for a call that returns 200 with an
+ * incomplete answer — exactly what the ticket's own evidence showed {@code agent.list} can do. Once
+ * this class started trusting that signal, an empty read would otherwise get cached as fact and
+ * silently drop a lead {@code CallerResolver} had, until then, correctly resolved — turning it into a
+ * {@code Role.WORKER}, which refuses every orchestration call. So a terminal this class already
+ * reported as live is not dropped the first time {@code agent.list} loses it: {@link #scan()} grants
+ * it one grace scan (see {@code gracedTerminals}) and only drops it if a <em>later</em> scan still
+ * finds no agent. A terminal never reported live before gets no grace — that would weaken the
+ * original #359 fix itself, which this class's own test suite already pins.
  */
 public final class LeadTabScanner implements Supplier<Map<String, String>> {
 
@@ -79,6 +103,15 @@ public final class LeadTabScanner implements Supplier<Map<String, String>> {
     private long scannedAtNanos;
     private boolean everScanned;
 
+    /**
+     * Terminals currently on their one grace scan: {@code cached} reported them live, the most
+     * recent {@link #scan()} found no agent for them, and they were re-included anyway. Cleared for
+     * a terminal the instant it is seen live again; a terminal still here on the <em>next</em> scan
+     * is finally dropped. Scoped separately from {@link #cached} so a graced terminal cannot renew
+     * its own grace forever just by staying in the exposed map (fleetd #359 review, finding 2).
+     */
+    private Set<String> gracedTerminals = Set.of();
+
     /**
      * @param herdr                   the herdr client to query ({@code workspace.list},
      *                                {@code tab.list}, {@code pane.list} — all read-only)
@@ -141,7 +174,7 @@ public final class LeadTabScanner implements Supplier<Map<String, String>> {
         return cached;
     }
 
-    /** One full pass: labelled tabs → their panes → those panes' terminals. */
+    /** One full pass: labelled tabs → live agents in them → those panes' terminals. */
     private Map<String, String> scan() {
         Map<String, String> nameByTab = new LinkedHashMap<>();
         for (JsonNode w : herdr.call("workspace.list").path("workspaces")) {
@@ -158,17 +191,47 @@ public final class LeadTabScanner implements Supplier<Map<String, String>> {
             }
         }
 
-        Map<String, String> byTerminal = new LinkedHashMap<>();
-        if (!nameByTab.isEmpty()) {
-            // One pane.list for every tab: panes carry tab_id, so the join is local.
-            for (JsonNode p : herdr.call("pane.list", Map.of()).path("panes")) {
-                String name = nameByTab.get(p.path("tab_id").asText(null));
-                String terminal = p.path("terminal_id").asText(null);
-                if (name != null && terminal != null && !terminal.isBlank()) {
-                    byTerminal.put(terminal, name);
-                }
+        if (nameByTab.isEmpty()) {
+            gracedTerminals = Set.of();
+            return Map.of();
+        }
+
+        // fleetd #359: a labelled tab is only a lead when herdr also reports a running agent in
+        // it — the same liveness signal LeadLauncher.countLeads trusts for the identical purpose.
+        // Without this, a tab left behind by a session that has since died reads as live forever.
+        Set<String> tabsWithAgent = new HashSet<>();
+        for (JsonNode a : herdr.call("agent.list").path("agents")) {
+            String tabId = a.path("tab_id").asText(null);
+            if (tabId != null) {
+                tabsWithAgent.add(tabId);
             }
         }
+
+        Map<String, String> byTerminal = new LinkedHashMap<>();
+        Set<String> stillGraced = new HashSet<>();
+        // One pane.list for every tab: panes carry tab_id, so the join is local.
+        for (JsonNode p : herdr.call("pane.list", Map.of()).path("panes")) {
+            String tabId = p.path("tab_id").asText(null);
+            String name = nameByTab.get(tabId);
+            String terminal = p.path("terminal_id").asText(null);
+            if (name == null || terminal == null || terminal.isBlank()) {
+                continue;
+            }
+            if (tabsWithAgent.contains(tabId)) {
+                byTerminal.put(terminal, name);
+                continue;
+            }
+            // No agent reported for this tab, but its tab/pane are still here — this is the
+            // ambiguous case review finding 2 named: a successful agent.list that came back short
+            // does not prove the lead is dead. Grant one grace scan to a terminal we had already
+            // reported as live; a terminal we never reported live gets none, so the original #359
+            // fix (a genuinely dead tab is never reported) is unaffected for the common case.
+            if (cached.containsKey(terminal) && !gracedTerminals.contains(terminal)) {
+                byTerminal.put(terminal, name);
+                stillGraced.add(terminal);
+            }
+        }
+        gracedTerminals = stillGraced;
         return Collections.unmodifiableMap(byTerminal);
     }
 
@@ -177,12 +240,14 @@ public final class LeadTabScanner implements Supplier<Map<String, String>> {
      *
      * <p>Exact match (case-insensitive, ends stripped) against {@link #tabToName} — no prefix
      * stripping, so an operator's {@code "lead: something-else"} tab is never mistaken for a
-     * configured lead just because it shares a prefix.
+     * configured lead just because it shares a prefix. The match strips a trailing
+     * {@link PendingCloseMarker} first, so a tab {@code LeadLauncher} has flagged as maybe-dead but
+     * not yet closed keeps resolving normally while that reconcile is pending.
      */
     private String leadNameOf(String label) {
         if (label == null) {
             return null;
         }
-        return tabToName.get(label.strip().toLowerCase(Locale.ROOT));
+        return tabToName.get(PendingCloseMarker.strip(label).toLowerCase(Locale.ROOT));
     }
 }

fleetd/src/main/java/dev/ltms/fleet/herdr/PendingCloseMarker.java

@@ -0,0 +1,42 @@
+package dev.ltms.fleet.herdr;
+
+/**
+ * The suffix {@code dev.ltms.fleet.lead.LeadLauncher} appends to a lead tab's label the first time a
+ * reconcile finds no running agent in it, before it is sure enough to close the tab outright.
+ *
+ * <p><strong>fleetd #359 review, finding 1.</strong> The daemon's own evidence showed
+ * {@code agent.list} can read "no agent" for a tab that genuinely has one running — so a single such
+ * reading must never be treated as proof a tab is dead. {@code LeadLauncher} now writes this marker
+ * on the first miss, and only closes the tab if a <em>later</em>, independent reconcile still finds
+ * it dead while the marker is still there. Two consecutive misses, one restart apart, is a much
+ * stronger claim than one.
+ *
+ * <p>{@link LeadTabScanner} strips the same suffix before matching a label against a configured
+ * lead's {@code tab}, so a flagged-but-actually-still-live tab keeps resolving normally — the marker
+ * changes nothing about which pane {@code LeadCoordLoop} can reach while the flag is pending. Both
+ * classes must use exactly this suffix, which is why it lives here rather than as a private constant
+ * on either.
+ */
+public final class PendingCloseMarker {
+
+    public static final String SUFFIX = " [fleetd:pending-close]";
+
+    private PendingCloseMarker() {
+    }
+
+    /** The label with any trailing pending-close marker removed, for name matching. */
+    public static String strip(String label) {
+        if (label == null) {
+            return null;
+        }
+        String stripped = label.strip();
+        return stripped.endsWith(SUFFIX)
+                ? stripped.substring(0, stripped.length() - SUFFIX.length()).strip()
+                : stripped;
+    }
+
+    /** Whether a label currently carries the marker. */
+    public static boolean isFlagged(String label) {
+        return label != null && label.strip().endsWith(SUFFIX);
+    }
+}

fleetd/src/main/java/dev/ltms/fleet/inject/CompletionResolver.java

@@ -548,8 +548,19 @@ public final class CompletionResolver implements TurnListener {
      * fast completion. Runs the same backend-error classification the normal and raw-scrape paths
      * apply, against whatever is on screen right now: a match together with the too-fast crash
      * signature notifies {@link #backendErrorSink} (only on the resolution that wins the race). A
-     * non-match stays the original generic too-fast failure, naming the member and both timings,
-     * with whatever the pane shows appended so the caller sees the cause, not just "it failed".
+     * non-match stays the generic too-fast failure, naming the member and both timings, with
+     * whatever the pane shows appended so the caller sees the evidence, not just "it failed".
+     *
+     * <p>fleetd#376: <strong>this path must never resolve a completion.</strong> A fast backend can
+     * genuinely answer inside the floor, so the failure is sometimes wrong — but it is wrong in the
+     * loud direction, and the fix for that is honest wording, not a guess at the pane's meaning.
+     * Reclassifying from the scrape was tried and rejected: there is no reliable positive marker for
+     * "this is a real reply" across backends. {@link #lastAssistantBlock} falls back to the entire
+     * pane when it finds no {@code ⏺} marker, so on a crash the candidate "reply" is the whole
+     * screen; and {@code ⏺} itself is a Claude Code marker that an opencode pane never carries — the
+     * very backend whose speed raised this ticket. Any weaker test (non-blank, or "contains sentence
+     * punctuation") passes on almost every crash, because a pane holding a file path, a version
+     * number or a hostname contains a full stop. That trades a loud wrong answer for a silent one.
      */
     private void failTooFast(String target, InFlight turn, CompletableFuture<Rendezvous.Resolution> waiter,
                               long elapsedNanos) {
@@ -560,13 +571,13 @@ public final class CompletionResolver implements TurnListener {
             scrape = "";
         }
         String clippedScrape = clip(scrape);
-        String baseReason = String.format(
-                "member %s went BUSY -> DONE in %dms (floor %dms) — too fast to be real work, most "
-                        + "likely a backend error before any work started",
+        String timing = String.format(
+                "member %s went BUSY -> DONE in %dms (floor %dms)",
                 target, elapsedNanos / 1_000_000, MIN_TURN_NANOS / 1_000_000);
         String backendError = firstMatchingLine(scrape, backendErrorPatternOrFallback(target));
         if (backendError != null) {
-            String reason = baseReason + ": " + clippedScrape;
+            String reason = timing + " — too fast to be real work, and the pane carries a backend "
+                    + "error: " + clippedScrape;
             if (rendezvous.resolveFailure(waiter, reason)) {
                 inFlight.remove(target, turn);
                 log.warn("failing send to {} via turn-stall fallback: {}", target, reason);
@@ -575,7 +586,14 @@ public final class CompletionResolver implements TurnListener {
             }
             return;
         }
-        fail(target, turn, clippedScrape.isBlank() ? baseReason : baseReason + ": " + clippedScrape);
+        // fleetd#376: no pattern matched, so the cause is genuinely unknown. Say that, rather than
+        // asserting a backend error the way this message used to — a fast backend really can finish
+        // inside the floor, and a reader who trusts a wrong cause stops looking at the pane.
+        String reason = timing + " — inside the floor. That is usually a backend error before any "
+                + "work started, but a fast backend can answer inside it too, and nothing here can "
+                + "tell those apart, so the turn is reported failed rather than guessed. Read the "
+                + "pane below before deciding which it was";
+        fail(target, turn, clippedScrape.isBlank() ? reason : reason + ": " + clippedScrape);
     }
 
     /**

fleetd/src/main/java/dev/ltms/fleet/lead/LeadLauncher.java

@@ -4,6 +4,7 @@ import dev.ltms.fleet.config.FleetConfig;
 import dev.ltms.fleet.herdr.Agent;
 import dev.ltms.fleet.herdr.AgentControl;
 import dev.ltms.fleet.herdr.HerdrException;
+import dev.ltms.fleet.herdr.PendingCloseMarker;
 import dev.ltms.fleet.herdr.Tab;
 import dev.ltms.fleet.herdr.Workspace;
 import dev.ltms.fleet.herdr.WorkspaceControl;
@@ -12,9 +13,11 @@ import org.slf4j.LoggerFactory;
 
 import java.util.ArrayList;
 import java.util.LinkedHashMap;
+import java.util.LinkedHashSet;
 import java.util.List;
 import java.util.Map;
 import java.util.Objects;
+import java.util.Set;
 import dev.ltms.fleet.peer.PeerLauncher;
 
 /**
@@ -44,8 +47,33 @@ import dev.ltms.fleet.peer.PeerLauncher;
  * privilege escalation (the tab label never granted anything a pane could take for itself; see that
  * class's javadoc), but <em>staleness</em>: a label left behind by a crashed session would otherwise
  * read as a live lead forever, and the lead would never be relaunched. So a lead counts as live only
- * when herdr also reports a <em>running agent</em> in that tab — see {@link #liveLeads}. A labelled
+ * when herdr also reports a <em>running agent</em> in that tab — see {@link #countLeads}. A labelled
  * tab with no agent in it is not a lead.
+ *
+ * <p><strong>fleetd #359 — a stale label used to pile up, not just mislead.</strong> Finding "not
+ * live" here used to mean only one thing: launch another. The old label was left exactly where it
+ * was, so a daemon that restarted enough times — or hit one herdr read that missed a genuinely
+ * running agent — accumulated one more identically-labelled dead tab per occurrence, and
+ * {@code LeadTabScanner} (before its own #359 fix) reported every one of them as a lead.
+ *
+ * <p><strong>Review finding 1 — closing on one reading is worse than the bug.</strong> The first
+ * version of this fix closed a name's dead tabs the moment a single {@link #countLeads} reading
+ * called them dead. The ticket's own live evidence rules that out: on a real host, {@code
+ * agent.list} was seen reporting "0 live" for a tab that a plain {@code ps} confirmed was running a
+ * real session. Closing on that reading would have destroyed the operator's actual lead — a worse
+ * failure than the extra tab it replaces. So {@link #ensureLeads()} now needs the same dead reading
+ * <em>twice</em>, one restart apart, before it closes anything: the first time a labelled tab reads
+ * dead, it is only flagged ({@link PendingCloseMarker}), left running, untouched; it is closed only
+ * if a <em>later</em>, independently-connected reconcile still finds it dead while the flag is
+ * still there. A transient miss self-heals — the next reconcile sees the agent again and clears the
+ * flag (see {@code toUnflag} below) — so the worst case for a single bad reading is one extra tab
+ * surviving one more restart, never a live session destroyed. Two alternatives were considered and
+ * rejected: corroborating {@code agent.list} against a second, truly independent signal was dropped
+ * because nothing else herdr exposes proves "is a process attached to this pane" any better — a
+ * second call to the same unreliable source is not independent evidence; capping the close to "all
+ * but the most recent dead tab" was dropped because "most recent" has no reliable ordering across
+ * tab ids and would leave the true failure mode (a name that is <em>never</em> reconfirmed) growing
+ * by one tab per bad reading forever, which is the exact defect this ticket exists to fix.
  */
 public final class LeadLauncher {
 
@@ -79,9 +107,9 @@ public final class LeadLauncher {
             return 0;
         }
 
-        Map<String, Integer> live;
+        Map<String, LeadCount> live;
         try {
-            live = liveLeads(leaders);
+            live = countLeads(leaders);
         } catch (HerdrException e) {
             // Counting is the whole safety mechanism against double-spawning. If we cannot count, we
             // must not guess — spawning a second orchestrator is worse than starting none.
@@ -93,9 +121,53 @@ public final class LeadLauncher {
         for (Map.Entry<String, FleetConfig.Leader> e : leaders.entrySet()) {
             String name = e.getKey();
             FleetConfig.Leader lead = e.getValue();
-            int running = live.getOrDefault(name, 0);
+            LeadCount state = live.getOrDefault(name, LeadCount.NONE);
+            int running = state.running();
             int wanted = lead.instances();
 
+            // fleetd #359 review finding 1: a tab already flagged pending-close, still labelled for
+            // this lead, and STILL hosting no agent on this separate reconcile — two independent
+            // readings agree, so close it. A tab found dead for the first time is only flagged below,
+            // never closed on the spot.
+            for (String tabId : state.toClose()) {
+                log.info("lead '{}': closing tab {} — flagged pending-close on a previous reconcile "
+                        + "and still no agent running in it", name, tabId);
+                try {
+                    spaces.closeTab(tabId);
+                } catch (RuntimeException cleanup) {
+                    log.warn("could not close stale tab {} for lead '{}': {}",
+                            tabId, name, cleanup.getMessage());
+                }
+            }
+            // A tab labelled for this lead, with no agent running in it, seen dead for the first
+            // time — flag it rather than closing it. One reading of `agent.list` is not enough
+            // evidence to destroy a tab that might genuinely be live (see the class javadoc).
+            for (String tabId : state.toFlag()) {
+                String flagged = lead.tabLabel() + PendingCloseMarker.SUFFIX;
+                log.info("lead '{}': tab {} has no agent running in it this reconcile — flagging it "
+                        + "'{}' rather than closing; it is only closed if a later reconcile still "
+                        + "finds it dead", name, tabId, flagged);
+                try {
+                    spaces.renameTab(tabId, flagged);
+                } catch (RuntimeException cleanup) {
+                    log.warn("could not flag stale tab {} for lead '{}': {}",
+                            tabId, name, cleanup.getMessage());
+                }
+            }
+            // A previously-flagged tab that is running an agent again — the miss that flagged it was
+            // transient. Clear the flag so a future, unrelated miss starts its own two-reading count
+            // rather than closing on the strength of this one's already-spent flag.
+            for (String tabId : state.toUnflag()) {
+                log.info("lead '{}': tab {} is running an agent again — clearing its pending-close flag",
+                        name, tabId);
+                try {
+                    spaces.renameTab(tabId, lead.tabLabel());
+                } catch (RuntimeException cleanup) {
+                    log.warn("could not clear the pending-close flag on tab {} for lead '{}': {}",
+                            tabId, name, cleanup.getMessage());
+                }
+            }
+
             if (running >= wanted) {
                 log.info("lead '{}': {} live, {} wanted — nothing to start", name, running, wanted);
                 continue;
@@ -126,18 +198,29 @@ public final class LeadLauncher {
     }
 
     /**
-     * How many live leads exist per configured name: a running agent in a tab labelled with that
-     * lead's exact {@code tab} (CB-579). Member workspaces are excluded, exactly as the scanner
-     * excludes them: a member must not be counted as a lead because it happens to sit in a matching
-     * tab.
+     * How many live leads exist per configured name, and which of that name's labelled tabs are
+     * <em>not</em> live: a running agent in a tab labelled with that lead's exact {@code tab}
+     * (CB-579). Member workspaces are excluded, exactly as the scanner excludes them: a member must
+     * not be counted as a lead because it happens to sit in a matching tab.
      *
      * <p>There used to be a second path here — a running agent on the terminal a
      * {@code fleet.leaders.<name>.terminal} pin named, for a lead opened and pinned by hand. That
      * pin is retired: {@code tab} is now the only field identity depends on, and {@link Agent}
      * already carries {@link Agent#tabId()} directly, so a hand-opened lead is found the same way an
      * auto-launched one is — by labelling its tab to match.
+     *
+     * <p>fleetd #359 review finding 1: a labelled tab with nothing running in it is split into
+     * {@code toClose} (already flagged pending-close by a previous reconcile, and still dead — two
+     * independent readings agree) and {@code toFlag} (dead for the first time — not enough evidence
+     * to close yet). {@code toUnflag} is the reverse: a tab flagged pending-close that is running an
+     * agent again, so the flag it carries no longer means anything and {@link #ensureLeads()} clears
+     * it.
      */
-    private Map<String, Integer> liveLeads(Map<String, FleetConfig.Leader> leaders) {
+    private record LeadCount(int running, List<String> toClose, List<String> toFlag, List<String> toUnflag) {
+        static final LeadCount NONE = new LeadCount(0, List.of(), List.of(), List.of());
+    }
+
+    private Map<String, LeadCount> countLeads(Map<String, FleetConfig.Leader> leaders) {
         // A lead and the members share ONE workspace now (the operator asked for a single "session"
         // with many tabs), so a workspace can no longer be excluded wholesale — the lead lives in the
         // member workspace by design. The sole discriminator is the exact tab label: a lead carries
@@ -145,6 +228,7 @@ public final class LeadLauncher {
         // profile's `worker: {profile} #{n}` template. These never collide, so an exact-label match
         // separates them without needing to know which workspace anyone is in.
         Map<String, String> nameByTab = new LinkedHashMap<>();
+        Set<String> flaggedTabIds = new LinkedHashSet<>();
         for (Workspace ws : spaces.listWorkspaces()) {
             if (ws.workspaceId() == null) {
                 continue;
@@ -153,31 +237,65 @@ public final class LeadLauncher {
                 String declared = leadNameOf(tab.label(), leaders);
                 if (declared != null && tab.tabId() != null) {
                     nameByTab.put(tab.tabId(), declared);
+                    if (PendingCloseMarker.isFlagged(tab.label())) {
+                        flaggedTabIds.add(tab.tabId());
+                    }
                 }
             }
         }
 
+        Set<String> liveTabIds = new LinkedHashSet<>();
         Map<String, Integer> counts = new LinkedHashMap<>();
         for (Agent a : agents.list()) {
             String name = nameByTab.get(a.tabId());
             if (name != null) {
                 counts.merge(name, 1, Integer::sum);
+                liveTabIds.add(a.tabId());
             }
         }
-        return counts;
+
+        Map<String, List<String>> toCloseByName = new LinkedHashMap<>();
+        Map<String, List<String>> toFlagByName = new LinkedHashMap<>();
+        Map<String, List<String>> toUnflagByName = new LinkedHashMap<>();
+        nameByTab.forEach((tabId, name) -> {
+            boolean live = liveTabIds.contains(tabId);
+            boolean flagged = flaggedTabIds.contains(tabId);
+            if (live) {
+                if (flagged) {
+                    toUnflagByName.computeIfAbsent(name, k -> new ArrayList<>()).add(tabId);
+                }
+                return;
+            }
+            if (flagged) {
+                toCloseByName.computeIfAbsent(name, k -> new ArrayList<>()).add(tabId);
+            } else {
+                toFlagByName.computeIfAbsent(name, k -> new ArrayList<>()).add(tabId);
+            }
+        });
+
+        Map<String, LeadCount> out = new LinkedHashMap<>();
+        for (String name : leaders.keySet()) {
+            out.put(name, new LeadCount(counts.getOrDefault(name, 0),
+                    toCloseByName.getOrDefault(name, List.of()),
+                    toFlagByName.getOrDefault(name, List.of()),
+                    toUnflagByName.getOrDefault(name, List.of())));
+        }
+        return out;
     }
 
     /**
      * The configured lead a tab label names, or {@code null} for a label that names none.
      *
      * <p>Matched exactly (case-insensitively) against each lead's configured {@code tab}, so an
-     * operator's {@code "lead: something-else"} tab is not mistaken for a configured lead.
+     * operator's {@code "lead: something-else"} tab is not mistaken for a configured lead. A
+     * trailing {@link PendingCloseMarker} is stripped first, so a tab this class flagged on a
+     * previous reconcile is still recognised as the same lead's tab on this one.
      */
     private String leadNameOf(String label, Map<String, FleetConfig.Leader> leaders) {
         if (label == null) {
             return null;
         }
-        String l = label.strip();
+        String l = PendingCloseMarker.strip(label);
         for (Map.Entry<String, FleetConfig.Leader> e : leaders.entrySet()) {
             String tab = e.getValue().tabLabel();
             if (tab != null && l.equalsIgnoreCase(tab.strip())) {

fleetd/src/main/java/dev/ltms/fleet/mcp/FleetMcp.java

@@ -44,6 +44,7 @@ import java.util.Objects;
 import java.util.Set;
 import java.util.UUID;
 import java.util.concurrent.ConcurrentHashMap;
+import java.util.concurrent.TimeUnit;
 import java.util.function.BiFunction;
 import java.util.function.Function;
 import java.util.function.LongSupplier;
@@ -101,6 +102,8 @@ public final class FleetMcp {
     private final LeadSeatSource leadSeats;
     /** CB-637: this daemon's lead-to-lead channel; {@code null} when no coordinator is configured. */
     private final LeadChannel leadChannel;
+    /** fleetd #361: {@code coordinator.peers} — see {@link CoordinationSource}. Empty when unset. */
+    private final List<String> peers;
 
     /** Capacity facts used by {@code fleet_list}; production must supply the placement live count. */
     public record CapacitySource(Function<String, Integer> liveCount, Function<String, Integer> maxLoad,
@@ -164,6 +167,32 @@ public final class FleetMcp {
         public static LeadSeatSource none() { return new LeadSeatSource(_ -> 0); }
     }
 
+    /**
+     * fleetd #361: peer-visibility facts for {@code fleet_list}'s {@code coordinator} row — this
+     * daemon's own {@link LeadChannel} (for its self mailbox state and held messages) plus the
+     * coord-ids the operator has declared as peers ({@code coordinator.peers}). Bundled as its own
+     * Source, the same idiom as {@link OutageSource}/{@link QuarantineSource}/{@link LeadSeatSource},
+     * so {@code listFleet}'s already-long overload chain gains exactly one new required parameter
+     * instead of a further bare positional argument.
+     *
+     * <p>Every mailbox look this triggers goes through {@link LeadChannel#inspect}, which is
+     * specified to run on its own disposable channel — never the channel {@link LeadChannel#publish}
+     * or the consume loop depends on — so a peer that happens to be down, or the coordination broker
+     * itself being unreachable, can never take {@code fleet_send}/{@code LeadCoordLoop}'s own path
+     * down with it. See {@code FleetMcp.probe} for the additional timeout bound on top of that.
+     *
+     * @param leadChannel this daemon's own channel, or {@code null} when no coordinator is configured
+     * @param peers       the coord-ids declared under {@code coordinator.peers}, or empty
+     */
+    public record CoordinationSource(LeadChannel leadChannel, List<String> peers) {
+        public CoordinationSource {
+            peers = peers == null ? List.of() : List.copyOf(peers);
+        }
+
+        /** Inert source — no coordinator row is ever reported. */
+        public static CoordinationSource none() { return new CoordinationSource(null, List.of()); }
+    }
+
     /**
      * @param callers resolves each call's {@link Principal}; {@code null} disables authorization.
      *                This surface needs its own enforcement: {@code /mcp} is a raw servlet on
@@ -211,19 +240,34 @@ public final class FleetMcp {
     }
 
     /**
-     * As above, with fleetd #176 lead-seat facts (see {@link LeadSeatSource}). This is what
-     * {@code Fleetd.main} actually wires up.
-     *
-     * @param leadSeats required — pass {@link LeadSeatSource#none()} for a caller that does not want
-     *                  the feature, never a defaulting overload (the same rule {@code quarantine} and
-     *                  {@code outage} follow).
+     * As above, with fleetd #176 lead-seat facts (see {@link LeadSeatSource}).
      */
     public FleetMcp(MessageService messages, PeerLauncher workers, SessionManager sessions,
                      ConnectionIdentity identity, MemberPresence presence, PrimaryRegistry primaryRegistry,
                       CallerResolver callers, Metrics metrics, CapacitySource capacity, HealthCoverageSource healthCoverage,
                       QuarantineSource quarantine, LeadChannel leadChannel, OutageSource outage,
                       LeadSeatSource leadSeats) {
+        this(messages, workers, sessions, identity, presence, primaryRegistry, callers, metrics, capacity,
+                healthCoverage, quarantine, leadChannel, outage, leadSeats, List.of());
+    }
+
+    /**
+     * As above, with fleetd #361 {@code coordinator.peers} (see {@link CoordinationSource}). This is
+     * what {@code Fleetd.main} actually wires up.
+     *
+     * @param leadSeats required — pass {@link LeadSeatSource#none()} for a caller that does not want
+     *                  the feature, never a defaulting overload (the same rule {@code quarantine} and
+     *                  {@code outage} follow).
+     * @param peers     the coord-ids declared under {@code coordinator.peers}; empty when unset or
+     *                  when {@code leadChannel} is {@code null}.
+     */
+    public FleetMcp(MessageService messages, PeerLauncher workers, SessionManager sessions,
+                     ConnectionIdentity identity, MemberPresence presence, PrimaryRegistry primaryRegistry,
+                      CallerResolver callers, Metrics metrics, CapacitySource capacity, HealthCoverageSource healthCoverage,
+                      QuarantineSource quarantine, LeadChannel leadChannel, OutageSource outage,
+                      LeadSeatSource leadSeats, List<String> peers) {
         this.leadChannel = leadChannel;
+        this.peers = peers == null ? List.of() : List.copyOf(peers);
         this.capacity = capacity;
         this.quarantine = Objects.requireNonNull(quarantine, "quarantine");
         this.outage = Objects.requireNonNull(outage, "outage");
@@ -361,7 +405,7 @@ public final class FleetMcp {
                     return listFleet(workers, sessions, messages, capacity, healthCoverage, quarantine, outage,
                             leadSeats, callers == null ? Map.of() : callers.leads(),
                             callerTerminal(exchange),
-                            leadChannel == null ? null : leadChannel.selfCoordId());
+                            new CoordinationSource(leadChannel, peers));
                 };
         BiFunction<McpSyncServerExchange, McpSchema.CallToolRequest, McpSchema.CallToolResult> stopHandler =
                 (exchange, req) -> {
@@ -697,6 +741,15 @@ public final class FleetMcp {
      * turned into a tool error naming the coord-id. It is never allowed to escape as a crash: an
      * unreachable peer is an ordinary outcome of addressing a fleet you do not control.
      *
+     * <p><strong>fleetd #361: the success text is honest about what "durably confirmed" does and
+     * does not mean.</strong> The broker's publisher confirm proves the message is durably queued —
+     * it says nothing about whether the peer's pane has, or ever will, receive it. After a
+     * successful publish this looks at the target mailbox's consumer count (via
+     * {@link LeadChannel#inspect}, bounded and never allowed to fail the call — see {@link #probe})
+     * and appends a warning when it is zero: that is the observable form of "nobody is reading this
+     * right now". A zero-consumer publish is still reported as a SUCCESS, never an error — the
+     * message is safely queued and will be read once a daemon owning that coord-id connects.
+     *
      * @param leadChannel this daemon's channel, or {@code null} when no coordinator is configured
      */
     static McpSchema.CallToolResult sendToLead(LeadChannel leadChannel, String coordId, String content,
@@ -724,7 +777,16 @@ public final class FleetMcp {
                     + ". Check that a daemon is running with coordinator.selfId=\"" + coordId
                     + "\" and is connected to the same coordination broker.");
         }
-        return text("delivered to peer lead " + coordId + " (msgId " + msg.msgId() + ")");
+        String result = "published to peer lead \"" + coordId + "\"'s mailbox and durably confirmed "
+                + "by the broker (msgId " + msg.msgId() + ").";
+        LeadChannel.MailboxState state = probe(leadChannel, coordId);
+        if (state.exists() && state.consumers() == 0) {
+            result += " Warning: that mailbox currently has NO consumers attached — nobody is reading "
+                    + "it right now. The message is safely queued and will be delivered once a daemon "
+                    + "with coordinator.selfId=\"" + coordId + "\" is running and connected; until then "
+                    + "it will not reach that lead's pane.";
+        }
+        return text(result);
     }
 
     /**
@@ -808,6 +870,11 @@ public final class FleetMcp {
      * or — when no send is open — queueing the reply in the inbox for later drain (CB-307).
      * {@code callerTerminal} is resolved from the connection (never an argument); a {@code null}
      * means the caller is not a known worker (e.g. the primary called it by mistake).
+     *
+     * <p>fleetd #365: the result text names which of those actually happened
+     * ({@link MessageService.ReplyOutcome#description()}) instead of the single word "delivered"
+     * for both — a queued reply is a real success, but it is not the same fact as one that resolved
+     * a live waiter, and the caller could not previously tell them apart.
      */
     static McpSchema.CallToolResult reply(MessageService messages, String callerTerminal, String content) {
         if (callerTerminal == null) {
@@ -822,8 +889,8 @@ public final class FleetMcp {
         if (isBlank(content)) {
             return error("content is required");
         }
-        messages.reply(callerTerminal, content);
-        return text("delivered");
+        MessageService.ReplyOutcome outcome = messages.reply(callerTerminal, content);
+        return text(outcome.description());
     }
 
     /** {@code fleet_ack}: acknowledge (remove) a specific reply from the inbox. */
@@ -1110,7 +1177,8 @@ public final class FleetMcp {
     static McpSchema.CallToolResult listFleet(PeerLauncher workers, SessionManager sessions, MessageService messages,
                                                CapacitySource capacity, HealthCoverageSource healthCoverage,
                                                QuarantineSource quarantine, Map<String, String> leads, String selfTerm) {
-        return listFleet(workers, sessions, messages, capacity, healthCoverage, quarantine, leads, selfTerm, null);
+        return listFleet(workers, sessions, messages, capacity, healthCoverage, quarantine, leads, selfTerm,
+                CoordinationSource.none());
     }
 
     /** As above, plus fleetd #201 Unit 5 cool-off facts (see {@link OutageSource}). */
@@ -1119,33 +1187,33 @@ public final class FleetMcp {
                                                QuarantineSource quarantine, OutageSource outage,
                                                Map<String, String> leads, String selfTerm) {
         return listFleet(workers, sessions, messages, capacity, healthCoverage, quarantine, outage,
-                LeadSeatSource.none(), leads, selfTerm, null);
+                LeadSeatSource.none(), leads, selfTerm, CoordinationSource.none());
     }
 
     /**
-     * As above, additionally reporting this daemon's own lead coordination id (CB-637) when one is
-     * configured and its channel opened. There is no peer-discovery surface yet — a lead addresses a
-     * peer by a coord-id it was told — so this row exists to answer the one question the operator
-     * cannot answer any other way: what is MY coord-id, the one a peer must use to reach me. It is
-     * omitted entirely when no coordinator is configured, so an ordinary fleet's output is unchanged.
+     * As above, additionally reporting this daemon's own lead coordination state (CB-637, fleetd
+     * #361) when a coordinator is configured and its channel opened — see {@link #coordinatorView}
+     * for the shape. Omitted entirely when no coordinator is configured, so an ordinary fleet's
+     * output is unchanged.
      *
-     * @param selfCoordId this daemon's coord-id, or {@code null} when lead coordination is off
+     * @param coordination this daemon's lead channel plus its declared peers, or
+     *                      {@link CoordinationSource#none()} when lead coordination is off
      */
     static McpSchema.CallToolResult listFleet(PeerLauncher workers, SessionManager sessions, MessageService messages,
                                                CapacitySource capacity, HealthCoverageSource healthCoverage,
                                                QuarantineSource quarantine, Map<String, String> leads, String selfTerm,
-                                               String selfCoordId) {
+                                               CoordinationSource coordination) {
         return listFleet(workers, sessions, messages, capacity, healthCoverage, quarantine, OutageSource.none(),
-                LeadSeatSource.none(), leads, selfTerm, selfCoordId);
+                LeadSeatSource.none(), leads, selfTerm, coordination);
     }
 
     /** As above, plus fleetd #201 Unit 5 cool-off facts (see {@link OutageSource}). */
     static McpSchema.CallToolResult listFleet(PeerLauncher workers, SessionManager sessions, MessageService messages,
                                                CapacitySource capacity, HealthCoverageSource healthCoverage,
                                                QuarantineSource quarantine, OutageSource outage,
-                                               Map<String, String> leads, String selfTerm, String selfCoordId) {
+                                               Map<String, String> leads, String selfTerm, CoordinationSource coordination) {
         return listFleet(workers, sessions, messages, capacity, healthCoverage, quarantine, outage,
-                LeadSeatSource.none(), leads, selfTerm, selfCoordId);
+                LeadSeatSource.none(), leads, selfTerm, coordination);
     }
 
     /** As above, plus fleetd #176 lead-seat facts (see {@link LeadSeatSource}). */
@@ -1153,7 +1221,7 @@ public final class FleetMcp {
                                                CapacitySource capacity, HealthCoverageSource healthCoverage,
                                                QuarantineSource quarantine, OutageSource outage,
                                                LeadSeatSource leadSeats, Map<String, String> leads, String selfTerm,
-                                               String selfCoordId) {
+                                               CoordinationSource coordination) {
         try {
             Map<String, Agent> live = workers.list().stream()
                     .map(Agent.class::cast)
@@ -1175,8 +1243,9 @@ public final class FleetMcp {
             Map<String, Object> result = new LinkedHashMap<>();
             result.put("leads", leadRows); result.put("members", out);
             result.put("healthCoverage", healthCoverage.value().get());
-            if (selfCoordId != null && !selfCoordId.isBlank()) {
-                result.put("coordinator", Map.of("selfId", selfCoordId, "configured", true));
+            Map<String, Object> coordinatorRow = coordinatorView(coordination);
+            if (coordinatorRow != null) {
+                result.put("coordinator", coordinatorRow);
             }
             if (capacity.available()) result.put("capacity", profiles.stream()
                     .map(profile -> capacityView(profile, capacity.liveCount(), capacity.maxLoad(), roster, messages,
@@ -1187,6 +1256,140 @@ public final class FleetMcp {
         }
     }
 
+    /**
+     * fleetd #361: the {@code coordinator} row — this daemon's own coord-id and mailbox state, the
+     * messages currently held for it, and the live reachability of every operator-declared peer.
+     * {@code null} (the row is then omitted entirely) when lead coordination is off, so an ordinary
+     * fleet's {@code fleet_list} output is byte-identical to before this feature existed.
+     *
+     * <p>Every peer/self mailbox look goes through {@link #probe}, which bounds each
+     * {@link LeadChannel#inspect} call to {@link #PEER_PROBE_TIMEOUT_MS} and never lets it throw —
+     * a coordination broker that is down or slow degrades this row toward "unreachable"/"unknown"
+     * counts, it can never make {@code fleet_list} itself slow or fail. {@code held} comes from
+     * {@link LeadChannel#peek}, a pure in-memory read with no broker round trip, so it is never
+     * subject to that bound.
+     */
+    private static Map<String, Object> coordinatorView(CoordinationSource coordination) {
+        LeadChannel channel = coordination.leadChannel();
+        if (channel == null) {
+            return null;
+        }
+        String selfId = channel.selfCoordId();
+        Map<String, Object> row = new LinkedHashMap<>();
+        row.put("selfId", selfId);
+        row.put("configured", true);
+        row.put("mailbox", mailboxView(probe(channel, selfId)));
+        row.put("held", channel.peek().stream().map(FleetMcp::heldView).toList());
+        row.put("peers", coordination.peers().stream().map(p -> peerView(channel, p)).toList());
+        return row;
+    }
+
+    /**
+     * fleetd #361: render a {@link LeadChannel.MailboxState} without ever presenting an unmeasured
+     * fact as a measured one. {@code status} is the tri-state itself — {@code "exists"},
+     * {@code "absent"} (the broker positively confirmed no such queue), or {@code "unknown"} (the
+     * probe could not determine either way: down, unreachable, or timed out). {@code pending}/
+     * {@code consumers} are included ONLY when {@code status == "exists"} — a reader must never see
+     * them default to {@code 0} for a mailbox this call never actually measured. This is the fix for
+     * the review finding that a collapsed {@code absent()} rendered a self-probe timeout as
+     * "pending: 0, consumers: 0", indistinguishable from an actually-empty, actually-unread mailbox.
+     */
+    private static Map<String, Object> mailboxView(LeadChannel.MailboxState state) {
+        Map<String, Object> row = new LinkedHashMap<>();
+        row.put("status", state.exists() ? "exists" : state.known() ? "absent" : "unknown");
+        if (state.exists()) {
+            row.put("pending", state.pending());
+            row.put("consumers", state.consumers());
+        }
+        return row;
+    }
+
+    /** One held-for-me message: enough to identify it and see roughly what it says, never the whole body. */
+    private static Map<String, Object> heldView(LeadMessage m) {
+        Map<String, Object> row = new LinkedHashMap<>();
+        row.put("msgId", m.msgId());
+        row.put("from", m.from());
+        row.put("preview", preview(m.content()));
+        return row;
+    }
+
+    /** Cap a held message's content to a short preview — {@code fleet_list} must never dump a full body. */
+    private static final int HELD_PREVIEW_MAX_CHARS = 80;
+
+    private static String preview(String content) {
+        if (content == null) {
+            return "";
+        }
+        return content.length() <= HELD_PREVIEW_MAX_CHARS
+                ? content
+                : content.substring(0, HELD_PREVIEW_MAX_CHARS) + "…";
+    }
+
+    /**
+     * One declared peer's row: its coord-id, then the same tri-state {@link #mailboxView} shape.
+     * Deliberately no boolean "reachable" field — that collapsed "confirmed gone" and "could not
+     * check" into the same {@code false}, which is exactly the review finding this row now avoids:
+     * an operator reading {@code status} can tell "fleet01 is down" (a {@code coordinator.selfId}
+     * nobody has ever run) apart from "my own broker is slow or unreachable right now".
+     */
+    private static Map<String, Object> peerView(LeadChannel channel, String coordId) {
+        Map<String, Object> row = new LinkedHashMap<>();
+        row.put("coordId", coordId);
+        row.putAll(mailboxView(probe(channel, coordId)));
+        return row;
+    }
+
+    /**
+     * fleetd #361: how long {@code fleet_list} waits on any single {@link LeadChannel#inspect} call
+     * before giving up on it — see {@link #probe}.
+     */
+    private static final long PEER_PROBE_TIMEOUT_MS = 1_500L;
+
+    /**
+     * Dedicated pool for {@link LeadChannel#inspect} calls so a slow one blocks only its own virtual
+     * thread, never the MCP request thread calling {@code fleet_list}. Not a <em>bounded</em> pool —
+     * {@code newThreadPerTaskExecutor} starts a fresh virtual thread per call with no cap on how many
+     * run at once; virtual threads make that cheap, not bounded. What actually keeps a hung probe
+     * from accumulating forever is the {@link Future#cancel} in {@link #probe}, not a pool limit.
+     */
+    private static final java.util.concurrent.ExecutorService PEER_PROBE_POOL =
+            java.util.concurrent.Executors.newThreadPerTaskExecutor(Thread.ofVirtual().name("fleet-peer-probe-", 0).factory());
+
+    /**
+     * fleetd #361: {@link LeadChannel#inspect}, bounded to {@link #PEER_PROBE_TIMEOUT_MS} and never
+     * allowed to throw or hang the caller — a coordination broker that is unreachable or slow
+     * degrades to {@link LeadChannel.MailboxState#unknown} (never {@code absent}: a timeout proves
+     * nothing about whether the mailbox exists) rather than making {@code fleet_list} slow or
+     * failing it. {@code inspect} itself is already specified to never throw, but this is the seam
+     * that also survives an implementation that does, or one that blocks indefinitely on a dead
+     * connection.
+     *
+     * <p><strong>A timeout cancels the orphaned task</strong> rather than abandoning it. Before this,
+     * {@code get(timeout)} on a hung {@code inspect} left the submitted task running forever on its
+     * own virtual thread, holding the AMQP channel it had already opened — against a broker that
+     * hangs rather than fails fast, every {@code fleet_list} call would orphan one more channel until
+     * the connection's channel-max (2047 by default) was exhausted, which would break {@link
+     * LeadChannel#publish} too. {@link Future#cancel(boolean) cancel(true)} interrupts the orphaned
+     * task's thread; {@link LeadMailbox#inspect} has no interruptible wait of its own to catch that,
+     * but the underlying AMQP RPC continuation does block on one, so the interrupt reaches it and the
+     * task's {@code finally} still closes the probe channel it opened rather than leaking it forever.
+     */
+    private static LeadChannel.MailboxState probe(LeadChannel channel, String coordId) {
+        return probe(channel, coordId, PEER_PROBE_TIMEOUT_MS);
+    }
+
+    /** As {@link #probe(LeadChannel, String)}, with an explicit timeout — a seam for tests. */
+    static LeadChannel.MailboxState probe(LeadChannel channel, String coordId, long timeoutMs) {
+        java.util.concurrent.Future<LeadChannel.MailboxState> future =
+                PEER_PROBE_POOL.submit(() -> channel.inspect(coordId));
+        try {
+            return future.get(timeoutMs, TimeUnit.MILLISECONDS);
+        } catch (Exception e) {
+            future.cancel(true); // best-effort: don't leave a hung probe (and its channel) running forever
+            return LeadChannel.MailboxState.unknown(coordId);
+        }
+    }
+
     /**
      * Capacity is advisory only. {@code reclaimable} says there is no bridge work, not that fleetd
      * may stop the member: the bridge has capacity facts but no work list, and choosing work needs
@@ -1377,8 +1580,12 @@ public final class FleetMcp {
                                 + "routes your answer back into the same turn (omit for a normal delegation)"),
                         "coordId", stringProp("A peer LEAD's coordination id — delivers content to that "
                                 + "lead's durable mailbox on the shared coordination broker, which works "
-                                + "across hosts. Mutually exclusive with sessionId and turnId. Your own "
-                                + "coordId is reported by fleet_list.")),
+                                + "across hosts. Mutually exclusive with sessionId and turnId. Success means "
+                                + "the message is durably queued and confirmed by the broker, with a warning "
+                                + "if that mailbox has no consumers attached right now (queued, but nobody is "
+                                + "reading it yet) — it does not mean the peer's pane has seen it. Your own "
+                                + "coordId, this daemon's mailbox state, and every coordinator.peers entry's "
+                                + "live reachability are reported by fleet_list's coordinator row.")),
                         List.of("content")));
     }
 
@@ -1486,7 +1693,13 @@ public final class FleetMcp {
                         + "for a quarantined profile's credential (see fleet_profiles), whatever its "
                         + "maxLoad/live — with credentialId and quarantinedForSeconds naming the "
                         + "quarantine, so 'free: 0, busy' can be told apart from 'free: 0, refusing "
-                        + "for N seconds'.",
+                        + "for N seconds'. When lead-to-lead coordination is configured, a 'coordinator' "
+                        + "object reports this daemon's own coord-id ('selfId') and mailbox state "
+                        + "('mailbox': pending/consumers), the messages currently held for it ('held': "
+                        + "msgId/from/preview, never the full body), and one row per coordinator.peers "
+                        + "coord-id ('peers': coordId/reachable, plus pending/consumers when reachable) — "
+                        + "this is peer DISCOVERY for cross-host leads, distinct from the local 'leads' "
+                        + "array above. It is omitted entirely when no coordinator is configured.",
                 objectSchema(Map.of(), List.of()));
     }
 

fleetd/src/main/java/dev/ltms/fleet/member/CompositePeerLauncher.java

@@ -369,8 +369,7 @@ public final class CompositePeerLauncher implements PeerLauncher {
             // CB-547a: route the chosen profile but keep the caller's session identity — dropping it
             // here would silently sever the resume handle on every policy-routed spawn. CB-557: the
             // role rides along for the same reason, or a routed spawn would be labelled as a dev.
-            SpawnRequest routedReq = new SpawnRequest(chosen.profile(), req.requestedCwd(), req.callerCwd(),
-                    req.sessionName(), req.resumeSessionId(), req.role());
+            SpawnRequest routedReq = req.withProfile(chosen.profile());
             try {
                 PeerHandle handle = d.spawn(routedReq);
                 spawnedBy.put(handle.id(), d);

fleetd/src/main/java/dev/ltms/fleet/member/EnvAllowListScrub.java

@@ -13,6 +13,7 @@ import java.nio.file.attribute.PosixFilePermissions;
 import java.time.Duration;
 import java.time.Instant;
 import java.util.ArrayList;
+import java.util.HashSet;
 import java.util.List;
 import java.util.Set;
 import java.util.stream.Stream;
@@ -28,24 +29,46 @@ import java.util.stream.Stream;
  * control lacked: herdr applies that overlay BEFORE the shell starts, so any sourced file can undo
  * it — and did.
  *
- * <p><b>Which file is last depends on the platform, so the scrub runs from two of them.</b> zsh
+ * <p><b>zsh reads its four startup files under three different conditions, so no single file is
+ * guaranteed to run — the scrub has to cover the gap between them, not just the platforms.</b> zsh
  * reads {@code .zshenv} always, {@code .zprofile} and {@code .zlogin} only for a LOGIN shell, and
- * {@code .zshrc} only for an INTERACTIVE one. herdr does not open the same kind of shell
- * everywhere — measured on herdr 0.8.0: macOS panes run {@code -zsh} (login, so {@code .zlogin}
- * runs), Linux panes run a plain {@code /usr/bin/zsh} (interactive but NOT login, so
- * {@code .zlogin} never runs at all). A scrub in {@code .zlogin} alone is therefore a control that
- * silently does nothing on Linux — the exact failure this class exists to remove, one platform
- * over.
+ * {@code .zshrc} only for an INTERACTIVE one. A pane shell that is at least one of login or
+ * interactive is covered by sourcing the scrub from {@code .zshrc} and {@code .zlogin} (below), but
+ * a pane shell that is NEITHER reads only {@code .zshenv} and stops — fleetd #388, measured: a herdr
+ * pane can be neither login nor interactive, and such a pane read {@code .zshenv}, never reached
+ * {@code scrub.zsh}, and left no report at all. A bare {@code argv[0]} of {@code /usr/bin/zsh}
+ * proves the shell is NOT a login shell; it says nothing about whether it is interactive, so it
+ * must never be read as "therefore interactive" — that wrong inference is what let #388 ship.
  *
- * <p>So both {@code .zshrc} and {@code .zlogin} source the same generated {@code scrub.zsh} after
- * sourcing their {@code $HOME} counterpart. On Linux only the first fires; on macOS both do, and
- * the second pass is deliberate rather than merely harmless — it re-scrubs anything the operator's
- * own {@code ~/.zlogin} exported after {@code .zshrc} had finished. Re-running is idempotent: a
- * name already blank is blanked again, and the report is rewritten with the same counts.
+ * <p>So {@code .zshenv} carries a THIRD pass, guarded by the exact condition that defines the gap:
+ * {@code [[ ! -o login && ! -o interactive ]]}. That guard is why this pass cannot double-scrub a
+ * pane that {@code .zshrc} or {@code .zlogin} will also cover — one of {@code -o login}/
+ * {@code -o interactive} is always true there, so the {@code .zshenv} pass never fires for them, and
+ * their own unconditional sourcing is untouched. The guard also carries a sentinel
+ * ({@value #SCRUB_SENTINEL}) so it fires once per PANE and not once per PROCESS: {@code .zshenv} is
+ * read by every zsh a member's own tooling forks (a plain {@code zsh -c '...'} for a single
+ * command is itself neither login nor interactive), and those children inherit variables their
+ * parent deliberately set for them (git hooks get {@code GIT_DIR}, a venv gets
+ * {@code VIRTUAL_ENV}, a build tool gets {@code NODE_OPTIONS} or {@code JAVA_TOOL_OPTIONS}).
+ * Re-scrubbing every such child would blank all of that, and would also make the pane's own
+ * {@code scrub-report.txt} — rewritten on every pass — describe whichever child exited last
+ * instead of the pane. The sentinel is exported only AFTER {@code scrub.zsh} runs, so the pass
+ * that sets it never sees it and cannot blank it; it must also be on the scrub's own allow-list
+ * (see {@link #generate(Path, Set)}) so a later pass, in the same pane, cannot blank it back to
+ * empty — an exported-but-empty sentinel reads as unset to the {@code -z} guard and would silently
+ * re-enable scrubbing for every subsequent child of that pane.
+ *
+ * <p>So all three of {@code .zshenv} (gap only, guarded), {@code .zshrc}, and {@code .zlogin}
+ * source the same generated {@code scrub.zsh} after sourcing their {@code $HOME} counterpart. A
+ * login-and-interactive pane runs the {@code .zshrc} and {@code .zlogin} passes, and the second is
+ * deliberate rather than merely harmless — it re-scrubs anything the operator's own
+ * {@code ~/.zlogin} exported after {@code .zshrc} had finished. A pane that is neither runs only the
+ * {@code .zshenv} pass. Re-running is idempotent: a name already blank is blanked again, and the
+ * report is rewritten with the same counts.
  *
  * <p>Each generated file sources its {@code $HOME} counterpart FIRST, so {@code PATH} and every
- * toolchain binary still resolve exactly as the operator configured them; only afterwards does
- * {@code .zlogin} run the scrub: every EXPORTED variable not on the derived allow-list is re-exported
+ * toolchain binary still resolve exactly as the operator configured them; only afterwards does the
+ * scrub run: every EXPORTED variable not on the derived allow-list is re-exported
  * blank. Blank, not credential-shaped-pattern-filtered: a pattern list ({@code *TOKEN*}, …) is an
  * enumeration and misses what it did not think of — a username is the other half of a credential and
  * is shaped like none. Credential-SHAPED names among the blanked set go to the WARN log only,
@@ -63,7 +86,11 @@ public final class EnvAllowListScrub {
     /** Name of the report file written into the generated directory by the scrub itself. */
     static final String REPORT_FILE = "scrub-report.txt";
 
-    /** The scrub body, generated once and sourced from both {@code .zshrc} and {@code .zlogin}. */
+    /**
+     * The scrub body, generated once and sourced from {@code .zshrc} and {@code .zlogin}
+     * unconditionally, and from {@code .zshenv} when the pane shell is neither login nor
+     * interactive (fleetd #388) — see the class javadoc.
+     */
     static final String SCRUB_FILE = "scrub.zsh";
 
     /** Prefix of every generated directory — also what {@link #reapOrphans} matches on. */
@@ -79,6 +106,28 @@ public final class EnvAllowListScrub {
     private static final String SOURCE_SCRUB =
             "source \"$ZDOTDIR/" + SCRUB_FILE + "\"\n";
 
+    /**
+     * fleetd #388: marks a pane, not a process, as already scrubbed. Set only by the guarded
+     * {@code .zshenv} pass (see {@link #NEITHER_LOGIN_NOR_INTERACTIVE_SCRUB}) after
+     * {@code scrub.zsh} has run, so it must also be folded into that pass's own allow-list — see
+     * the class javadoc's "must also be on the scrub's own allow-list" paragraph.
+     */
+    static final String SCRUB_SENTINEL = "_CB633_SCRUBBED";
+
+    /**
+     * Appended to {@code .zshenv}, after its {@code $HOME} source: the third pass, guarded on the
+     * exact condition that defines the gap {@code .zshrc}/{@code .zlogin} do not cover — a shell
+     * that is neither login nor interactive. The sentinel export happens only once the scrub has
+     * already run, and only for as long as the current pane's environment has not been rebuilt from
+     * scratch (a fresh {@code env -i} child would not inherit it — that is out of scope here, since
+     * such a child is no longer running under the pane's own environment at all).
+     */
+    private static final String NEITHER_LOGIN_NOR_INTERACTIVE_SCRUB =
+            "if [[ ! -o login && ! -o interactive && -z \"${" + SCRUB_SENTINEL + ":-}\" ]]; then\n"
+            + "  " + SOURCE_SCRUB
+            + "  export " + SCRUB_SENTINEL + "=1\n"
+            + "fi\n";
+
     private EnvAllowListScrub() {
     }
 
@@ -105,11 +154,16 @@ public final class EnvAllowListScrub {
             reapOrphans(parentDir);
             Path dir = Files.createTempDirectory(parentDir, DIR_PREFIX);
             dir.toFile().deleteOnExit();
-            // The report is written by zsh, after these hooks are registered, so register its path
-            // too — otherwise the directory is non-empty at JVM exit and cannot be removed at all.
-            dir.resolve(REPORT_FILE).toFile().deleteOnExit();
-            write(dir, SCRUB_FILE, scrubScript(allowedNames));
-            write(dir, ".zshenv", homeSourcingFile(".zshenv"));
+            // zsh truncates this pre-created receipt after these hooks are registered. Register its
+            // path too — otherwise the directory is non-empty at JVM exit and cannot be removed.
+            Files.createFile(dir.resolve(REPORT_FILE)).toFile().deleteOnExit();
+            // fleetd #388: scrub.zsh's OWN allow-list must also keep SCRUB_SENTINEL, or a later
+            // pass in the same pane blanks it back to empty and the .zshenv guard below thinks it
+            // was never scrubbed — see the class javadoc.
+            Set<String> namesForScrubScript = new HashSet<>(allowedNames);
+            namesForScrubScript.add(SCRUB_SENTINEL);
+            write(dir, SCRUB_FILE, scrubScript(namesForScrubScript));
+            write(dir, ".zshenv", homeSourcingFile(".zshenv") + NEITHER_LOGIN_NOR_INTERACTIVE_SCRUB);
             write(dir, ".zprofile", homeSourcingFile(".zprofile"));
             write(dir, ".zshrc", homeSourcingFile(".zshrc") + SOURCE_SCRUB);
             write(dir, ".zlogin", homeSourcingFile(".zlogin") + SOURCE_SCRUB);
@@ -147,12 +201,11 @@ public final class EnvAllowListScrub {
      * into it: owner keeps full access, {@code group} gets traverse+read on the directory ({@code
      * rwxr-x---}, so a member process — a login shell reading it via {@code ZDOTDIR}, or another
      * process simply opening a file under it — running under that group can find and read the
-     * files) and read-only on each file ({@code rw-r-----}) — deliberately no group WRITE anywhere,
-     * since a member never needs to add or change what fleetd generated. (For the ZDOTDIR scrub
-     * specifically, this also means the scrub script's own report write inside the pane fails
-     * closed rather than open — see {@code scrub.zsh}'s trailing {@code 2>/dev/null} — which {@link
-     * dev.ltms.fleet.member.HerdrPeerLauncher#releaseZdotdir} already treats as "cannot be
-     * confirmed to have run" rather than success.)
+     * files) and read-only on each file ({@code rw-r-----}), except the pre-created ZDOTDIR
+     * {@code scrub-report.txt}. That receipt gets group write ({@code rw-rw----}), so
+     * {@code scrub.zsh} can truncate and write it without granting group write on the directory.
+     * If its optional permission change fails, the member cannot write a receipt and the launcher
+     * keeps its existing WARN rather than failing the spawn.
      *
      * <p>Package-private and named generically on purpose: fleetd #213 built this for the ZDOTDIR
      * scrub directory, and fleetd #219 reuses it verbatim for {@link
@@ -167,7 +220,15 @@ public final class EnvAllowListScrub {
             setGroupAndPermissions(dir, principal, "rwxr-x---");
             try (Stream<Path> entries = Files.list(dir)) {
                 for (Path file : entries.toList()) {
-                    setGroupAndPermissions(file, principal, "rw-r-----");
+                    if (REPORT_FILE.equals(file.getFileName().toString())) {
+                        try {
+                            setGroupAndPermissions(file, principal, "rw-rw----");
+                        } catch (IOException | UnsupportedOperationException ignored) {
+                            // The receipt is optional. Its absence keeps the existing WARN path.
+                        }
+                    } else {
+                        setGroupAndPermissions(file, principal, "rw-r-----");
+                    }
                 }
             }
         } catch (IOException e) {
@@ -245,11 +306,13 @@ public final class EnvAllowListScrub {
         }
         return """
                 # generated by fleetd (CB-633 memberCredentials policy=allow-list) — do not edit.
-                # Sourced from .zshrc and again from .zlogin, each time AFTER that file has sourced
-                # its $HOME counterpart — so this runs after everything the operator sourced, on a
-                # login shell (macOS panes) and on a plain interactive one (Linux panes) alike.
-                # Running twice is idempotent and deliberate: the second pass catches anything
-                # ~/.zlogin exported after ~/.zshrc had finished.
+                # Sourced unconditionally from .zshrc and again from .zlogin, each time AFTER that
+                # file has sourced its $HOME counterpart — so this runs after everything the
+                # operator sourced, on any pane that is login and/or interactive. Running twice is
+                # idempotent and deliberate: the second pass catches anything ~/.zlogin exported
+                # after ~/.zshrc had finished. Also sourced, once, from a guarded pass in .zshenv
+                # (fleetd #388) when the pane shell is NEITHER login nor interactive — the one gap
+                # those two files do not cover.
 
                 typeset -A _cb633_allowed
                 for _cb633_n in %s; do _cb633_allowed[$_cb633_n]=1; done
@@ -271,7 +334,30 @@ public final class EnvAllowListScrub {
                   _cb633_blank+=("$_cb633_n")
                 done
 
-                { for _cb633_n in "${_cb633_blank[@]}"; do export "$_cb633_n="; done; } 2>/dev/null
+                # `export UID=` is not a failed command: it is a FATAL zsh parameter error
+                # ("failed to change user ID") that aborts this whole sourced file mid-loop,
+                # leaving every later name unscrubbed and the report below unwritten — silently,
+                # because of the 2>/dev/null. Neither `|| true` nor a `${(t)n}` type guard
+                # contains it; only `eval` does. `eval` is safe here precisely because the loop
+                # above already rejected every name that is not [A-Za-z_][A-Za-z0-9_]*, so
+                # nothing but a bare identifier can reach it.
+                #
+                # Enumerating the special names instead (UID|EUID|GID|EGID|PPID|LINENO) also
+                # works, but only for the ones enumerated: a special that turns up exported on
+                # some other host brings the abort straight back. `eval` contains all of them.
+                #
+                # Then VERIFY. A contained failure is still a failure, so a name that did not
+                # actually blank must not be reported as blanked. It currently falls into the
+                # "allowed" count, which is imprecise in the safe direction; the honest third
+                # count ("tried and could not blank") needs a report-format change and belongs
+                # with fleetd #394, not here.
+                typeset -a _cb633_done
+                _cb633_done=()
+                for _cb633_n in "${_cb633_blank[@]}"; do
+                  eval "export ${_cb633_n}=" 2>/dev/null
+                  [[ -z "${(P)_cb633_n}" ]] && _cb633_done+=("$_cb633_n")
+                done
+                _cb633_blank=("${_cb633_done[@]}")
 
                 integer _cb633_kept=$(( _cb633_total - ${#_cb633_blank} ))
                 {
@@ -279,7 +365,7 @@ public final class EnvAllowListScrub {
                   for _cb633_n in "${_cb633_blank[@]}"; do print -r -- "$_cb633_n"; done
                 } > "$ZDOTDIR/%s" 2>/dev/null
 
-                unset _cb633_allowed _cb633_names _cb633_blank _cb633_n _cb633_total _cb633_kept
+                unset _cb633_done _cb633_allowed _cb633_names _cb633_blank _cb633_n _cb633_total _cb633_kept
                 """.formatted(names, MemberEnvAllowList.zshCasePattern(), REPORT_FILE);
     }
 

fleetd/src/main/java/dev/ltms/fleet/metrics/FleetMetrics.java

@@ -56,10 +56,13 @@ public final class FleetMetrics {
         m.describe(REPLIES, "counter",
                 "Worker replies by delivery path (rendezvous=resolved an open send, inbox=stranded and held).");
         m.describe(PUSH_NUDGES, "counter",
-                "CB-307 push-loop nudges to the primary (delivered|exhausted).");
+                "CB-307 push-loop nudges to the primary (sent|exhausted). fleetd #365: \"sent\" means "
+                        + "the herdr paste-and-submit call succeeded, not that the pane read it — this "
+                        + "layer has no read-receipt concept.");
         m.describe(HEARTBEAT_NUDGES, "counter",
-                "CB-551 idle-lead heartbeat nudges (delivered|failed|exhausted). Quiet-cap exhaustion "
-                        + "means the lead idled with nothing pending and was told to stand down.");
+                "CB-551 idle-lead heartbeat nudges (sent|failed|exhausted). Quiet-cap exhaustion "
+                        + "means the lead idled with nothing pending and was told to stand down. "
+                        + "fleetd #365: \"sent\" means the herdr call succeeded, not that the lead read it.");
         m.describe(SPAWNS, "counter",
                 "Worker spawn attempts by peer kind and outcome (ready|timeout|guard_rejected).");
         m.describe(HERDR_CALLS, "counter",

fleetd/src/main/java/dev/ltms/fleet/msg/LeadChannel.java

@@ -4,8 +4,8 @@ import java.util.List;
 
 /**
  * The lead-to-lead message channel this daemon speaks, as its callers need it — one lead's own
- * mailbox: publish to a peer's coord-id, look at what has arrived for me, and ack what I have
- * delivered.
+ * mailbox: publish to a peer's coord-id, look at what has arrived for me, ack what I have
+ * delivered, and (fleetd #361) inspect any coord-id's mailbox from the outside without owning it.
  *
  * <p>Extracted from {@link LeadMailbox} purely as a seam. {@code LeadMailbox} is the one production
  * implementation and owns a live AMQP connection, so a test that wanted to exercise the routing in
@@ -32,9 +32,87 @@ public interface LeadChannel {
     /** Non-destructive FIFO snapshot of the messages held for this daemon's own coord-id. */
     List<LeadMessage> peek();
 
-    /** Drop {@code msgId} from the held set and ack it on the broker. A no-op if it is not held. */
+    /**
+     * Drop {@code msgId} from the held set and ack it on the broker. A repeated ack that this
+     * connection already completed may be a no-op. Any other unknown msgId must throw rather than
+     * report an ack that did not reach the broker.
+     */
     void ack(String msgId);
 
     /** This daemon's own lead coordination id — the mailbox it owns, and the {@code from} it sends as. */
     String selfCoordId();
+
+    /**
+     * A non-destructive look at {@code coordId}'s mailbox — does it exist, how many messages are
+     * waiting on it, and how many consumers are attached — without owning, consuming, or otherwise
+     * changing it. {@code consumers == 0} on an existing mailbox is the observable form of "nobody
+     * is reading this right now": a publish to it will sit queued rather than reach a pane.
+     *
+     * <p><strong>Never throws</strong> — this is a best-effort fact-finding call, not an operation a
+     * caller must handle failing. But it must never turn "I could not check" into a false negative:
+     * {@link MailboxState#absent(String)} means the broker positively confirmed there is no such
+     * queue, and {@link MailboxState#unknown(String)} — a distinct value — means the look could not
+     * be completed at all (broker unreachable, timed out, connection closed). A caller that
+     * collapses those two into one, as fleetd #361 initially did, cannot tell "that peer is down"
+     * from "I could not check", and a reader of {@code pending}/{@code consumers} cannot tell a
+     * measured zero from a zero standing in for "not measured".
+     *
+     * <p><strong>Must never share fate with {@link #publish} or {@link #peek}/{@link #ack}.</strong>
+     * fleetd #361: in AMQP 0-9-1 a passive queue declare of a queue that does not exist closes the
+     * channel it was declared on with a 404. An implementation backed by a real broker connection
+     * must inspect on a channel it can afford to lose — never the channel {@link #publish} or the
+     * consume loop depends on — so that looking at a peer that happens to be down can never break
+     * this daemon's own send or receive path.
+     */
+    MailboxState inspect(String coordId);
+
+    /**
+     * The result of {@link #inspect}. {@code presence} tells apart three states a caller must not
+     * conflate: a confirmed-existing mailbox ({@link Presence#EXISTS}, the only case where
+     * {@code pending}/{@code consumers} are measured facts), a confirmed-absent one
+     * ({@link Presence#ABSENT} — the broker positively said "no such queue"), and one this call
+     * simply could not determine ({@link Presence#UNKNOWN} — broker unreachable, timed out,
+     * connection closed). {@code pending}/{@code consumers} are always {@code 0} and meaningless
+     * outside {@link Presence#EXISTS}; a renderer must gate on {@link #exists()} (or {@code
+     * presence} directly), never present them as measured otherwise.
+     *
+     * @param coordId   the coord-id inspected
+     * @param presence  whether the mailbox is confirmed to exist, confirmed absent, or unknown
+     * @param pending   messages ready for delivery but not yet in a consumer's hands (0 unless EXISTS)
+     * @param consumers how many consumers are attached (0 unless EXISTS)
+     */
+    record MailboxState(String coordId, Presence presence, int pending, int consumers) {
+
+        /** Whether {@link #inspect} was able to reach a definite answer, of either kind. */
+        public enum Presence { EXISTS, ABSENT, UNKNOWN }
+
+        /** {@code true} only when the broker confirmed this exact queue is currently declared. */
+        public boolean exists() {
+            return presence == Presence.EXISTS;
+        }
+
+        /**
+         * {@code true} when {@link #inspect} reached a definite answer (exists or confirmed
+         * absent); {@code false} when it could not determine either way. A caller must never treat
+         * {@code !known()} the same as a confirmed absence — the mailbox may well exist.
+         */
+        public boolean known() {
+            return presence != Presence.UNKNOWN;
+        }
+
+        /** The broker confirmed this queue exists, with these measured counts. */
+        public static MailboxState exists(String coordId, int pending, int consumers) {
+            return new MailboxState(coordId, Presence.EXISTS, pending, consumers);
+        }
+
+        /** The broker positively confirmed there is no such queue (e.g. a 404 on passive declare). */
+        public static MailboxState absent(String coordId) {
+            return new MailboxState(coordId, Presence.ABSENT, 0, 0);
+        }
+
+        /** The look could not be completed — broker unreachable, timed out, or connection closed. */
+        public static MailboxState unknown(String coordId) {
+            return new MailboxState(coordId, Presence.UNKNOWN, 0, 0);
+        }
+    }
 }

fleetd/src/main/java/dev/ltms/fleet/msg/LeadCoordLoop.java

@@ -5,6 +5,7 @@ import dev.ltms.fleet.herdr.AgentStatus;
 import org.slf4j.Logger;
 import org.slf4j.LoggerFactory;
 
+import java.util.LinkedHashMap;
 import java.util.List;
 import java.util.Map;
 import java.util.concurrent.ScheduledExecutorService;
@@ -43,6 +44,9 @@ public final class LeadCoordLoop {
 
     private static final Logger log = LoggerFactory.getLogger(LeadCoordLoop.class);
 
+    /** A bounded window is enough: redelivery can only follow a recent failed ack or recovery. */
+    private static final int RECENT_DELIVERY_LIMIT = 1_024;
+
     /** How an arriving peer message is rendered into the lead's pane — the sender's coord-id, then its text. */
     static final String DELIVERY_FORMAT = "[lead %s] %s";
 
@@ -51,6 +55,8 @@ public final class LeadCoordLoop {
     private final Supplier<Map<String, String>> leads;
     private final ScheduledExecutorService scheduler;
     private final long intervalMs;
+    /** msgIds already written to the pane, so recovery redelivery is acked without another pane write. */
+    private final LinkedHashMap<String, Boolean> delivered = new LinkedHashMap<>();
 
     private volatile boolean running;
 
@@ -117,6 +123,13 @@ public final class LeadCoordLoop {
         if (held.isEmpty()) {
             return;
         }
+        LeadMessage msg = held.getFirst();
+        if (wasDelivered(msg.msgId())) {
+            // This lives here, rather than in LeadMailbox, because only this loop knows a pane write
+            // happened. The mailbox only knows broker delivery tags and must still redeliver after a crash.
+            ackDelivered(msg);
+            return;
+        }
         String lead = resolveLocalLead();
         if (lead == null) {
             // Left unacked on purpose: the broker keeps holding it until a lead pane exists.
@@ -136,7 +149,6 @@ public final class LeadCoordLoop {
                     lead, status, held.size());
             return;
         }
-        LeadMessage msg = held.getFirst();
         try {
             agents.send(lead, DELIVERY_FORMAT.formatted(msg.from(), msg.content()));
         } catch (RuntimeException e) {
@@ -145,6 +157,13 @@ public final class LeadCoordLoop {
                     msg.msgId(), msg.from(), lead, e.toString());
             return;
         }
+        rememberDelivered(msg.msgId());
+        if (ackDelivered(msg)) {
+            log.debug("lead coordination: delivered message {} from {} to lead {}", msg.msgId(), msg.from(), lead);
+        }
+    }
+
+    private boolean ackDelivered(LeadMessage msg) {
         try {
             channel.ack(msg.msgId());
         } catch (RuntimeException e) {
@@ -152,9 +171,24 @@ public final class LeadCoordLoop {
             // deliberate direction of this trade.
             log.warn("lead coordination: delivered message {} but could not ack it: {}",
                     msg.msgId(), e.toString());
-            return;
+            return false;
+        }
+        return true;
+    }
+
+    private boolean wasDelivered(String msgId) {
+        synchronized (delivered) {
+            return delivered.containsKey(msgId);
+        }
+    }
+
+    private void rememberDelivered(String msgId) {
+        synchronized (delivered) {
+            delivered.put(msgId, Boolean.TRUE);
+            if (delivered.size() > RECENT_DELIVERY_LIMIT) {
+                delivered.remove(delivered.keySet().iterator().next());
+            }
         }
-        log.debug("lead coordination: delivered message {} from {} to lead {}", msg.msgId(), msg.from(), lead);
     }
 
     /**

fleetd/src/main/java/dev/ltms/fleet/msg/LeadHeartbeatLoop.java

@@ -96,7 +96,14 @@ public final class LeadHeartbeatLoop {
         this.metrics = metrics;
     }
 
-    /** Count one nudge outcome when a registry is wired; a no-op in unit tests. */
+    /**
+     * Count one nudge outcome when a registry is wired; a no-op in unit tests.
+     *
+     * <p>fleetd #365: the {@code "sent"} outcome (renamed from {@code "delivered"}) records only
+     * that {@link #injectNudge} — a one-way herdr {@code agent.prompt} paste-and-submit — returned
+     * without throwing, not that the lead's pane actually read or acted on the text. This layer has
+     * no read-receipt concept, so "sent" is the honest word for what this call can ever establish.
+     */
     private void countNudge(String outcome) {
         if (metrics != null) {
             metrics.inc(FleetMetrics.HEARTBEAT_NUDGES, "outcome", outcome);
@@ -245,7 +252,7 @@ public final class LeadHeartbeatLoop {
             agents.send(leadTerminal, fleet.nudgeText());
             log.debug("idle-heartbeat: nudge sent to lead {} (quiet nudges so far in this stretch: {})",
                     leadTerminal, quietCount);
-            countNudge("delivered");
+            countNudge("sent");
         } catch (RuntimeException e) {
             log.warn("idle-heartbeat: failed to nudge lead {}: {}", leadTerminal, e.toString());
             countNudge("failed");

fleetd/src/main/java/dev/ltms/fleet/msg/LeadMailbox.java

@@ -10,6 +10,7 @@ import com.rabbitmq.client.DeliverCallback;
 import com.rabbitmq.client.Recoverable;
 import com.rabbitmq.client.RecoveryListener;
 import com.rabbitmq.client.Return;
+import com.rabbitmq.client.ShutdownSignalException;
 import org.slf4j.Logger;
 import org.slf4j.LoggerFactory;
 
@@ -58,7 +59,8 @@ import java.util.concurrent.TimeoutException;
  * <p><strong>Recovery.</strong> The connection is opened with automatic + topology recovery
  * enabled, mirroring {@code AmqpReplyInbox}: on reconnect the broker hands out fresh delivery tags,
  * so the held snapshot is cleared (dedup by {@code msgId} still prevents any double-queue on
- * redelivery) and any publish still awaiting its confirm is failed rather than left to idle out
+ * redelivery). {@link LeadCoordLoop} separately deduplicates pane writes, since it alone knows
+ * which messages reached a lead. Any publish still awaiting its confirm is failed rather than left to idle out
  * the confirm timeout against a sequence number that means nothing on the new channel.
  */
 public final class LeadMailbox implements LeadChannel, AutoCloseable {
@@ -84,6 +86,10 @@ public final class LeadMailbox implements LeadChannel, AutoCloseable {
     private final Object channelLock = new Object();
     /** msgId → held delivery, for this mailbox's own queue only (there is exactly one). */
     private final LinkedHashMap<String, Held> held = new LinkedHashMap<>();
+    /** Successful broker acks on this connection, retained only to make a repeated caller ack quiet. */
+    private final LinkedHashMap<String, Boolean> recentlyAcked = new LinkedHashMap<>();
+    /** Bounds {@link #recentlyAcked}: it is only an idempotency aid, never delivery state. */
+    private static final int RECENT_ACK_LIMIT = 1_024;
 
     /**
      * A dedicated channel for {@link #publish}, kept separate from {@link #channel} (consume + ack)
@@ -161,16 +167,15 @@ public final class LeadMailbox implements LeadChannel, AutoCloseable {
         }
         // On automatic recovery the broker redelivers unacked messages with FRESH delivery-tags; the
         // tags we were holding are now stale. Drop the held snapshot so the re-attached consumer
-        // repopulates it with valid tags (dedup by msgId still prevents any double-queue). Any publish
+        // repopulates it with valid tags (dedup by msgId still prevents any double-queue). LeadCoordLoop
+        // remembers successful pane writes separately, so that redelivery cannot write a pane twice. Any publish
         // confirm still in flight when the connection dropped is equally stale — fail it now rather
         // than let it silently ride out CONFIRM_TIMEOUT_MS.
         if (connection instanceof Recoverable recoverable) {
             recoverable.addRecoveryListener(new RecoveryListener() {
                 @Override
                 public void handleRecovery(Recoverable recoverable) {
-                    synchronized (held) {
-                        held.clear();
-                    }
+                    clearHeldForRecovery();
                     failPendingPublishesOnRecovery();
                     log.info("AMQP lead mailbox connection recovered; cleared held messages for fresh redelivery");
                 }
@@ -259,6 +264,89 @@ public final class LeadMailbox implements LeadChannel, AutoCloseable {
         }
     }
 
+    /**
+     * fleetd #361: look at {@code coordId}'s mailbox on a fresh, immediately-closed throwaway
+     * channel — never {@link #channel} (consume/ack) or {@link #publishChannel} (publish). A
+     * passive queue declare of a queue that does not exist closes the channel it was declared on
+     * with a 404; using a disposable probe channel means that closure can never touch either
+     * long-lived channel this instance depends on for {@link #publish} or the consume loop.
+     *
+     * <p>Classifies failures rather than collapsing them, both measured against a real broker in
+     * {@code LeadMailboxTest} rather than assumed from the AMQP 0-9-1 spec text:
+     * <ul>
+     *   <li>a genuine 404 — an {@link IOException} wrapping a {@link ShutdownSignalException} whose
+     *       {@link AMQP.Channel.Close#getReplyCode()} is {@code 404} — reports
+     *       {@link MailboxState#absent}; every other declare failure reports
+     *       {@link MailboxState#unknown} instead of quietly becoming the same "absent" value;
+     *   <li>{@code catch (RuntimeException e)} on both attempts matters as much as the checked
+     *       catches: a connection that is already closed makes {@link Connection#createChannel()}
+     *       throw {@link com.rabbitmq.client.AlreadyClosedException} (a {@link RuntimeException},
+     *       not an {@link IOException}) — an {@code inspect} that only caught {@code IOException}
+     *       would let that escape, breaking the "never throws" contract this method promises.
+     * </ul>
+     *
+     * <p><strong>Honesty about which catch is measured and which is defensive:</strong> the
+     * {@code createChannel()} catch above is exercised end-to-end against a real broker by
+     * {@code LeadMailboxTest.inspectReportsUnknownRatherThanThrowingWhenTheConnectionIsAlreadyClosed}.
+     * The second {@code catch (RuntimeException e)}, around the passive declare itself — for the
+     * narrower race where the connection drops <em>between</em> {@code createChannel()} succeeding
+     * and the declare landing — has no such test; reaching it needs a connection that dies at that
+     * exact instant, which is not a scenario this suite drives on purpose. It stays purely
+     * defensive: correct by the same reasoning as the first catch, but unproven the way the first
+     * one is proven.
+     */
+    @Override
+    public MailboxState inspect(String coordId) {
+        String queue = queueName(coordId);
+        Channel probe;
+        try {
+            probe = connection.createChannel();
+        } catch (IOException | RuntimeException e) {
+            log.debug("lead mailbox inspect: cannot open a probe channel for {}: {}", coordId, e.toString());
+            return MailboxState.unknown(coordId);
+        }
+        try {
+            AMQP.Queue.DeclareOk declared = probe.queueDeclarePassive(queue);
+            return MailboxState.exists(coordId, declared.getMessageCount(), declared.getConsumerCount());
+        } catch (IOException e) {
+            // The broker (or the client library) has already closed `probe` for us either way; only
+            // a confirmed 404 means "no such queue" — anything else (a different declare failure) is
+            // "could not determine", never silently reported as the same value as a genuine absence.
+            return isMissingQueue(e) ? MailboxState.absent(coordId) : MailboxState.unknown(coordId);
+        } catch (RuntimeException e) {
+            // E.g. the connection dropped between createChannel() and the declare landing.
+            log.debug("lead mailbox inspect: declare failed unexpectedly for {}: {}", coordId, e.toString());
+            return MailboxState.unknown(coordId);
+        } finally {
+            try {
+                if (probe.isOpen()) {
+                    probe.close();
+                }
+            } catch (Exception e) {
+                log.debug("lead mailbox inspect: probe channel close for {}: {}", coordId, e.toString());
+            }
+        }
+    }
+
+    /**
+     * {@code true} only for the specific shape a missing-queue passive declare actually produces —
+     * measured against a real broker, not assumed from the spec text (see {@code
+     * LeadMailboxTest.passiveDeclareOfAMissingQueueThrowsAnIOExceptionWrappingA404ShutdownSignal}):
+     * an {@link IOException} whose cause is a {@link ShutdownSignalException} carrying an
+     * {@link AMQP.Channel.Close} reason with {@code replyCode == 404}. Any other shape (a different
+     * reply code, a {@code ShutdownSignalException} cause whose reason is not a
+     * {@code Channel.Close}, or no cause at all) is a declare failure of some other kind and must
+     * not be read as "confirmed absent" — pinned hermetically, with no broker needed, by
+     * {@code LeadMailboxIsMissingQueueTest} for exactly those three false shapes. Package-private
+     * (not {@code private}) so that test can call it directly.
+     */
+    static boolean isMissingQueue(IOException e) {
+        if (!(e.getCause() instanceof ShutdownSignalException sse)) {
+            return false;
+        }
+        return sse.getReason() instanceof AMQP.Channel.Close close && close.getReplyCode() == AMQP.NOT_FOUND;
+    }
+
     /** Convenience: {@link #peek} the current snapshot, then {@link #ack} every message in it. */
     public List<LeadMessage> drain() {
         List<LeadMessage> snapshot = peek();
@@ -266,15 +354,26 @@ public final class LeadMailbox implements LeadChannel, AutoCloseable {
         return snapshot;
     }
 
-    /** Remove the held message {@code msgId} and ack it on the broker. No-op if not held. */
+    /**
+     * Remove the held message {@code msgId} and ack it on the broker.
+     *
+     * <p>A repeated ack that this connection already completed is a no-op, tracked in the bounded
+     * {@link #recentlyAcked} set. Any other missing entry throws: recovery clears {@link #held} while
+     * the broker still owns the unacked delivery, and quiet success there would hide a required retry.
+     * The set is bounded because it only distinguishes a recent duplicate caller ack from an unknown
+     * delivery; it is not a substitute for broker state across a reconnect.
+     */
     @Override
     public void ack(String msgId) {
         Held h;
         synchronized (held) {
             h = held.remove(msgId);
+            if (h == null && recentlyAcked.containsKey(msgId)) {
+                return;
+            }
         }
         if (h == null) {
-            return;                                // never held (or already acked) — no-op
+            throw new IllegalStateException("cannot ack lead message " + msgId + ": it is not held");
         }
         try {
             synchronized (channelLock) {
@@ -288,6 +387,19 @@ public final class LeadMailbox implements LeadChannel, AutoCloseable {
             }
             throw new IllegalStateException("cannot ack lead message " + msgId, e);
         }
+        synchronized (held) {
+            recentlyAcked.put(msgId, Boolean.TRUE);
+            if (recentlyAcked.size() > RECENT_ACK_LIMIT) {
+                recentlyAcked.remove(recentlyAcked.keySet().iterator().next());
+            }
+        }
+    }
+
+    /** Clear stale delivery tags after recovery; package-private so the recovery contract test drives this exact path. */
+    void clearHeldForRecovery() {
+        synchronized (held) {
+            held.clear();
+        }
     }
 
     private DeliverCallback deliverCallback() {

fleetd/src/main/java/dev/ltms/fleet/msg/MessageService.java

@@ -138,6 +138,53 @@ public final class MessageService {
     public record AskResult(AskOutcome outcome, String answer) {
     }
 
+    /**
+     * How a worker's {@code fleet_reply} ({@link #reply(String, String)}) actually landed
+     * (fleetd #365) — the two doors that expose it, {@code fleet_reply} and {@code POST
+     * /sessions/{id}/reply}, both used to report the single word "delivered" whichever of these
+     * happened, so a caller could not tell an active handoff from a reply merely held for later
+     * drain. Both are successes; they are not the same fact.
+     */
+    public enum ReplyOutcome {
+        /** Resolved a {@code fleet_send}/{@code fleet_ask} that was actively waiting on this reply. */
+        RESOLVED_SEND("resolved_send", true,
+                "delivered — resolved the fleet_send that was waiting for it"),
+        /**
+         * No live waiter was open, but the reply completed a parked async ticket directly
+         * ({@link #askAnsweredAsyncTasks}) — a {@code fleet_poll} caller sees it immediately.
+         */
+        RESOLVED_ASYNC_TICKET("resolved_async_ticket", true,
+                "delivered — resolved a pending async ticket (visible to fleet_poll)"),
+        /** Nothing was waiting; the reply was queued in the inbox for a later drain (CB-307). */
+        QUEUED("queued", false,
+                "queued — no send or ticket was waiting; held in the inbox for a later drain");
+
+        private final String wireName;
+        private final boolean delivered;
+        private final String description;
+
+        ReplyOutcome(String wireName, boolean delivered, String description) {
+            this.wireName = wireName;
+            this.delivered = delivered;
+            this.description = description;
+        }
+
+        /** Stable machine-readable name for a JSON/metrics label (REST's {@code outcome} field). */
+        public String wireName() {
+            return wireName;
+        }
+
+        /** Whether something was actively waiting and received this reply right now. */
+        public boolean delivered() {
+            return delivered;
+        }
+
+        /** Shared human-readable text — the one place both {@code fleet_reply} and REST word this. */
+        public String description() {
+            return description;
+        }
+    }
+
     /** Lifecycle phase of an async delegation ticket. */
     public enum Phase {
         /** Delegated and in flight — queued for the worker or being worked. */
@@ -439,16 +486,15 @@ public final class MessageService {
      * @throws IllegalArgumentException if {@code content} is {@code null} or blank — the caller must
      *         report this as a client error (REST: 400 {@code bad_request}) rather than resolve
      *         anything
-     * @return always {@code true} — the reply resolved a live send, completed a parked ticket, or
-     *         was queued
+     * @return which of the three ways (fleetd #365) the reply actually landed — never {@code null}
      */
-    public boolean reply(String session, String content) {
+    public ReplyOutcome reply(String session, String content) {
         if (content == null || content.isBlank()) {
             throw new IllegalArgumentException("content is required");
         }
         if (rendezvous.resolve(session, content)) {
             count(FleetMetrics.REPLIES, "path", "rendezvous");
-            return true;                       // a live send took it — unchanged fast path
+            return ReplyOutcome.RESOLVED_SEND; // a live send took it — unchanged fast path
         }
         // #137/fleetd #307: no live rendezvous waiter, but this may be the worker's real fleet_reply resuming
         // a turn that either answer() (#137) or ask() (fleetd #307) already gave up waiting on:
@@ -480,7 +526,7 @@ public final class MessageService {
                     asyncTasksByTurn.remove(turnId, orphan);
                 }
                 count(FleetMetrics.REPLIES, "path", "async-recovered");
-                return true;                   // the ticket itself took it — no inbox stranding at all
+                return ReplyOutcome.RESOLVED_ASYNC_TICKET; // the ticket itself took it — no inbox stranding
             }
         } else if (candidates.size() > 1) {
             List<String> tickets = candidates.stream().map(t -> t.ticket).toList();
@@ -498,7 +544,7 @@ public final class MessageService {
         if (pushLoop != null) {
             pushLoop.onReplyQueued(session);
         }
-        return true;                           // held, not lost
+        return ReplyOutcome.QUEUED;             // held, not lost — but not delivered either
     }
 
     /**

fleetd/src/main/java/dev/ltms/fleet/msg/ReplyPushLoop.java

@@ -2,6 +2,7 @@ package dev.ltms.fleet.msg;
 
 import dev.ltms.fleet.herdr.AgentControl;
 import dev.ltms.fleet.herdr.AgentStatus;
+import dev.ltms.fleet.herdr.HerdrException;
 import dev.ltms.fleet.mcp.PrimaryRegistry;
 import dev.ltms.fleet.metrics.FleetMetrics;
 import dev.ltms.fleet.metrics.Metrics;
@@ -13,6 +14,7 @@ import java.util.Collection;
 import java.util.HashSet;
 import java.util.List;
 import java.util.Map;
+import java.util.Optional;
 import java.util.Set;
 import java.util.concurrent.ConcurrentHashMap;
 import java.util.concurrent.ScheduledExecutorService;
@@ -130,7 +132,15 @@ public final class ReplyPushLoop {
         this.metrics = metrics;
     }
 
-    /** Count one nudge outcome when a registry is wired; a no-op in unit tests. */
+    /**
+     * Count one nudge outcome when a registry is wired; a no-op in unit tests.
+     *
+     * <p>fleetd #365: the {@code "sent"} outcome (renamed from {@code "delivered"}) records only
+     * that {@code agents.send} — a one-way herdr {@code agent.prompt} paste-and-submit — returned
+     * without throwing. Nothing in this loop, or anywhere downstream of it, confirms the pane
+     * actually read or acted on the text; there is no read-receipt concept at this layer. "Sent"
+     * says exactly that; "delivered" claimed more than this call can ever establish.
+     */
     private void countNudge(String outcome) {
         if (metrics != null) {
             metrics.inc(FleetMetrics.PUSH_NUDGES, "outcome", outcome);
@@ -375,6 +385,80 @@ public final class ReplyPushLoop {
         return Action.WAIT_BUSY;
     }
 
+    /**
+     * Resolve who to nudge about {@code target}, the way every public entry point below wants it:
+     * {@link PrimaryRegistry#nudgeTargetFor}, but only after checking the delegating lead it names
+     * is still actually there (fleetd #368).
+     *
+     * <p><strong>The bug this closes.</strong> {@code PrimaryRegistry.forgetDelegation} is wired to
+     * exactly one event — a worker's release — because that is the only teardown the daemon already
+     * observes for a session in this map. Nothing removes a binding when the LEAD half goes away: a
+     * lead that is closed, crashes, or is relaunched leaves {@code leadByTarget} entries pointing at
+     * a terminal that no longer exists. {@code nudgeTargetFor} falls back to the single known
+     * primary only when the map holds nothing for {@code target} — a stale non-null entry beats the
+     * fallback every time, which is exactly backwards: the fallback's own javadoc argues it is safe
+     * precisely in the case a stale entry now hides.
+     *
+     * <p><strong>The fix.</strong> Before trusting a recorded delegation, probe the lead the same
+     * way {@link #decide} already does every tick ({@code agents.status}) — cheap, since it is a
+     * local herdr round-trip, and it is the same signal {@code AgentControl.paneByTerminal} already
+     * trusts to tell a genuinely dead target from a live one. A lead that fails the probe is treated
+     * as if it had never been recorded: the stale entry is forgotten (self-healing, exactly like
+     * {@code AgentControl.paneByTerminal} already does on {@code agent_not_found}) and resolution is
+     * retried, which now reaches the fallback {@code nudgeTargetFor} was built to reach — the same
+     * empty-map state its javadoc already argues is correct.
+     *
+     * <p><strong>fleetd #368 review — only a positive "gone" reading forgets the binding.</strong>
+     * The first version of this method treated <em>any</em> {@code RuntimeException} from the probe
+     * as death, which is the #359 mistake repeated: a transient socket blip or a codec error on a
+     * perfectly live lead would silently and permanently unbind it, with no re-record ever coming.
+     * That is destructive on one bad reading, exactly what #359 shipped a two-reading guard to avoid
+     * for the analogous lead-tab-liveness question. {@link #isLive} now matches
+     * {@code AgentControl.agentCall}'s own narrower rule (see its {@code agent_not_found} check): only
+     * that specific, affirmative "herdr has no such agent" signal counts as gone. Every other failure
+     * — timeout, transport error, a decode error — is treated as still live and the binding is left
+     * alone, because guessing wrong here is unrecoverable while guessing "live" merely costs one more
+     * retry on the next tick, which {@link #decide} already tolerates.
+     */
+    private Optional<String> resolveLiveLead(String target) {
+        Optional<String> lead = primaryRegistry.nudgeTargetFor(target);
+        if (lead.isEmpty() || isLive(lead.get())) {
+            return lead;
+        }
+        log.debug("push: lead {} delegated to for {} is no longer live, forgetting the stale binding "
+                + "and falling back", lead.get(), target);
+        primaryRegistry.forgetDelegation(target);
+        return primaryRegistry.nudgeTargetFor(target);
+    }
+
+    /**
+     * Whether {@code lead} should still be trusted: {@code false} only when herdr affirmatively
+     * reports the terminal gone ({@code agent_not_found}), never on a merely inconclusive failure.
+     *
+     * <p>fleetd #368 review: an earlier version returned {@code false} for any {@code RuntimeException},
+     * which made a transient herdr hiccup on a live lead indistinguishable from the lead actually
+     * being dead — and the caller's response to {@code false} ({@code forgetDelegation}) is
+     * destructive and permanent. Narrowed to the one code {@code AgentControl.agentCall} itself
+     * already treats as a genuine, resolvable absence (see its {@code agent_not_found} handling) —
+     * every other {@code RuntimeException} is treated as "still live" and the binding survives to be
+     * probed again next time, which costs nothing worse than one more retry.
+     */
+    private boolean isLive(String lead) {
+        try {
+            agents.status(lead);
+            return true;
+        } catch (RuntimeException e) {
+            boolean gone = e instanceof HerdrException he && "agent_not_found".equals(he.code());
+            if (gone) {
+                log.debug("push: lead {} no longer exists ({})", lead, e.toString());
+            } else {
+                log.debug("push: liveness check for lead {} was inconclusive ({}); treating as live "
+                        + "rather than risk destroying a live binding", lead, e.toString());
+            }
+            return !gone;
+        }
+    }
+
     // --- public entrypoints ----------------------------------------------------------------------
 
     /**
@@ -385,7 +469,7 @@ public final class ReplyPushLoop {
      * backstop until a lead is recorded.
      */
     public void onReplyQueued(String target) {
-        var lead = primaryRegistry.nudgeTargetFor(target);
+        var lead = resolveLiveLead(target);
         if (lead.isEmpty()) {
             log.debug("push: no lead is known to be waiting on {}, skipping reminder", target);
             return;
@@ -413,7 +497,7 @@ public final class ReplyPushLoop {
      * @param failed whether the ticket ended in a failure phase rather than {@code DONE}
      */
     public void onTicketTerminal(String ticket, String target, boolean failed) {
-        var lead = primaryRegistry.nudgeTargetFor(target);
+        var lead = resolveLiveLead(target);
         if (lead.isEmpty()) {
             log.debug("push: no lead is known to be waiting on ticket {} (target {}), skipping nudge",
                     ticket, target);
@@ -448,7 +532,7 @@ public final class ReplyPushLoop {
      * @param question the question text
      */
     public void onQuestionOpened(String ticket, String target, String turnId, String question) {
-        var lead = primaryRegistry.nudgeTargetFor(target);
+        var lead = resolveLiveLead(target);
         if (lead.isEmpty()) {
             log.debug("push: no lead is known to be waiting on {}'s question (turnId {}), skipping nudge",
                     target, turnId);
@@ -476,7 +560,7 @@ public final class ReplyPushLoop {
                                   Collection<String> profiles, int remainingCoolOffSeconds) {
         Map<String, List<String>> targetsByLead = new ConcurrentHashMap<>();
         for (String target : targets) {
-            var lead = primaryRegistry.nudgeTargetFor(target);
+            var lead = resolveLiveLead(target);
             if (lead.isEmpty()) {
                 log.warn("push: backend incident {} has no known lead for target {}", incidentId, target);
                 continue;
@@ -498,7 +582,7 @@ public final class ReplyPushLoop {
      * Without an owning lead, emit a warning because no control can act on the target.
      */
     public void onBackendTargetUnmapped(String target, String reason) {
-        var lead = primaryRegistry.nudgeTargetFor(target);
+        var lead = resolveLiveLead(target);
         if (lead.isEmpty()) {
             log.warn("push: backend target {} could not map to a credential: {}", target, reason);
             return;
@@ -654,7 +738,7 @@ public final class ReplyPushLoop {
                     lead, replyReminderCount + 1, maxReminders, ticketReminderCount + 1, maxReminders,
                     questionReminderCount + 1, maxReminders,
                     replyTargets.size(), tickets.size(), questions.size());
-            countNudge("delivered");
+            countNudge("sent");
             for (PendingIncident incident : incidents) {
                 if (pendingIncidents.remove(incident.key(), incident)) {
                     deliveredIncidents.add(incident.key());

fleetd/src/main/java/dev/ltms/fleet/peer/SpawnRequest.java

@@ -29,4 +29,9 @@ public record SpawnRequest(String profileName, String requestedCwd, String calle
                         String sessionName, String resumeSessionId) {
         this(profileName, requestedCwd, callerCwd, sessionName, resumeSessionId, null);
     }
+
+    /** Return a copy of this request with {@code profileName} replaced by {@code profile}. */
+    public SpawnRequest withProfile(String profile) {
+        return new SpawnRequest(profile, requestedCwd, callerCwd, sessionName, resumeSessionId, role);
+    }
 }

fleetd/src/main/java/dev/ltms/fleet/power/CaffeinateSleepAssertionMechanism.java

@@ -0,0 +1,93 @@
+package dev.ltms.fleet.power;
+
+import org.slf4j.Logger;
+import org.slf4j.LoggerFactory;
+
+import java.io.IOException;
+import java.util.Locale;
+import java.util.concurrent.TimeUnit;
+import java.util.concurrent.atomic.AtomicBoolean;
+
+/**
+ * Holds macOS idle sleep off by keeping a {@code caffeinate -i} child process alive for the life
+ * of the returned {@link SleepAssertion}.
+ *
+ * <p>{@code -i} asserts only against <em>idle</em> sleep — it does not stop the lid closing or an
+ * operator-requested sleep from taking effect. That is deliberate: this class exists to stop an
+ * unattended host from sleeping out from under a member's long turn, never to override the
+ * operator. {@code -s}/{@code -d} (which also block system/display sleep on demand) are
+ * intentionally not used here.
+ *
+ * <p>{@link #acquire()} never throws. It returns {@code null} — a no-op — off macOS, and again if
+ * starting the {@code caffeinate} child fails for any reason (binary missing, process table full,
+ * …); either case is logged once at INFO, not on every occurrence, so a daemon that runs for
+ * weeks with the tool unavailable does not fill its log.
+ */
+public final class CaffeinateSleepAssertionMechanism implements SleepAssertionMechanism {
+
+    private static final Logger log = LoggerFactory.getLogger(CaffeinateSleepAssertionMechanism.class);
+
+    private final AtomicBoolean loggedOnce = new AtomicBoolean(false);
+
+    /** {@code true} when running on macOS, the only platform {@code caffeinate} ships on. */
+    public static boolean isSupportedPlatform() {
+        return isSupportedPlatform(System.getProperty("os.name"));
+    }
+
+    /** Package-visible so a test can drive the platform check without touching a real property. */
+    static boolean isSupportedPlatform(String osName) {
+        return osName != null && osName.toLowerCase(Locale.ROOT).contains("mac");
+    }
+
+    @Override
+    public SleepAssertion acquire() {
+        if (!isSupportedPlatform()) {
+            logOnce("not running on macOS (os.name={}); the idle-sleep guard is a no-op on this platform",
+                    System.getProperty("os.name"));
+            return null;
+        }
+        try {
+            Process process = new ProcessBuilder("caffeinate", "-i")
+                    .redirectOutput(ProcessBuilder.Redirect.DISCARD)
+                    .redirectError(ProcessBuilder.Redirect.DISCARD)
+                    .start();
+            return new CaffeinateAssertion(process);
+        } catch (IOException | RuntimeException e) {
+            logOnce("could not start 'caffeinate -i' ({}); the host may idle-sleep while members are live",
+                    e.toString());
+            return null;
+        }
+    }
+
+    private void logOnce(String format, Object arg) {
+        if (loggedOnce.compareAndSet(false, true)) {
+            log.info("idle-sleep guard: " + format, arg);
+        }
+    }
+
+    /** Wraps the live {@code caffeinate} child; {@link #close} force-destroys it, idempotently. */
+    private static final class CaffeinateAssertion implements SleepAssertion {
+
+        private final Process process;
+
+        CaffeinateAssertion(Process process) {
+            this.process = process;
+        }
+
+        @Override
+        public void close() {
+            if (!process.isAlive()) {
+                return;
+            }
+            process.destroy();
+            try {
+                if (!process.waitFor(2, TimeUnit.SECONDS)) {
+                    process.destroyForcibly();
+                }
+            } catch (InterruptedException e) {
+                Thread.currentThread().interrupt();
+                process.destroyForcibly();
+            }
+        }
+    }
+}

fleetd/src/main/java/dev/ltms/fleet/power/IdleSleepGuard.java

@@ -0,0 +1,105 @@
+package dev.ltms.fleet.power;
+
+import org.slf4j.Logger;
+import org.slf4j.LoggerFactory;
+
+import java.util.function.IntSupplier;
+
+/**
+ * Holds an OS-level assertion against idle sleep for exactly as long as at least one fleet
+ * member is live.
+ *
+ * <p><strong>Why this exists:</strong> a fleetd host was measured idle-sleeping after as little
+ * as one minute of inactivity (its {@code pmset -g custom} reports {@code sleep 1} on battery).
+ * Overnight the daemon's AMQP link to the broker dropped 13 times, and cross-checking every drop
+ * minute against {@code pmset -g log} found a sleep or wake event in the same minute or the one
+ * before, every time. The AMQP churn is only the visible symptom — the real problem is that a
+ * member mid-turn freezes with the host, and a long turn with nobody typing is exactly the case
+ * that goes idle.
+ *
+ * <p><strong>How it tracks "live":</strong> this is driven by {@code SessionManager}'s existing
+ * {@code onAcquire}/{@code onRelease} lifecycle hooks (added for CB-520/CB-516, previously wired
+ * to nothing but the reply inbox) rather than a second member count kept in parallel. Wire it as:
+ * <pre>{@code
+ * IdleSleepGuard guard = new IdleSleepGuard(mechanism, sessions::size);
+ * sessions.onAcquire(_ -> guard.recheck());
+ * sessions.onRelease(_ -> guard.recheck());
+ * }</pre>
+ * Every acquire/release event re-reads {@code SessionManager#size()} — the same registry {@code
+ * fleet_list}'s live/capacity numbers are themselves computed from — and only an actual 0→1 or
+ * 1→0 crossing touches the OS. A listener exception is already caught and logged by {@code
+ * SessionManager} itself (it must never let a listener failure block the acquire/release it is
+ * reacting to), so {@link #recheck()} does not need its own top-level try/catch to honor that.
+ *
+ * <p><strong>Failure posture:</strong> every method here is safe to call whether or not {@link
+ * SleepAssertionMechanism#acquire()} actually works. A mechanism that returns {@code null} (wrong
+ * platform, missing tool, spawn failure) simply means this guard never holds anything — it never
+ * throws and never blocks a spawn, a release, or shutdown.
+ */
+public final class IdleSleepGuard implements AutoCloseable {
+
+    private static final Logger log = LoggerFactory.getLogger(IdleSleepGuard.class);
+
+    private final SleepAssertionMechanism mechanism;
+    private final IntSupplier liveCount;
+    private final Object lock = new Object();
+    private SleepAssertion held;
+
+    public IdleSleepGuard(SleepAssertionMechanism mechanism, IntSupplier liveCount) {
+        this.mechanism = mechanism;
+        this.liveCount = liveCount;
+    }
+
+    /**
+     * Re-read the live count and acquire or release the held assertion to match: nothing held and
+     * at least one member live ⇒ acquire; something held and no member live ⇒ release. A steady
+     * count (still zero, still positive) is a no-op either way, so a single spawn or release only
+     * ever touches the OS on the crossing, not on every call.
+     */
+    public void recheck() {
+        synchronized (lock) {
+            int live = liveCount.getAsInt();
+            if (live > 0 && held == null) {
+                held = mechanism.acquire();
+                if (held != null) {
+                    log.debug("idle-sleep guard armed: {} live member(s)", live);
+                }
+            } else if (live == 0 && held != null) {
+                releaseHeldLocked();
+            }
+        }
+    }
+
+    /** {@code true} while an assertion is actually held. Exposed for tests. */
+    boolean isHeld() {
+        synchronized (lock) {
+            return held != null;
+        }
+    }
+
+    /**
+     * Release whatever is held, if anything. Idempotent and safe to call at any time, including
+     * repeatedly — a daemon shutdown hook calls this unconditionally so no assertion (and no
+     * {@code caffeinate} child) survives the process, even if the drain that would otherwise have
+     * driven the live count to zero was itself interrupted or threw.
+     */
+    @Override
+    public void close() {
+        synchronized (lock) {
+            if (held != null) {
+                releaseHeldLocked();
+            }
+        }
+    }
+
+    /** Caller must hold {@link #lock}. */
+    private void releaseHeldLocked() {
+        try {
+            held.close();
+        } catch (RuntimeException e) {
+            log.warn("idle-sleep guard: failed to release its assertion cleanly: {}", e.toString());
+        } finally {
+            held = null;
+        }
+    }
+}

fleetd/src/main/java/dev/ltms/fleet/power/SleepAssertion.java

@@ -0,0 +1,11 @@
+package dev.ltms.fleet.power;
+
+/**
+ * A held OS-level assertion against idle sleep. {@link #close} must be idempotent — safe to call
+ * more than once — and must never throw, matching {@link IdleSleepGuard}'s "never break the
+ * fleet" contract.
+ */
+public interface SleepAssertion extends AutoCloseable {
+    @Override
+    void close();
+}

fleetd/src/main/java/dev/ltms/fleet/power/SleepAssertionMechanism.java

@@ -0,0 +1,21 @@
+package dev.ltms.fleet.power;
+
+/**
+ * The OS mechanism {@link IdleSleepGuard} uses to hold and release an idle-sleep assertion. This
+ * is the seam a test exercises instead of the real effect (a live {@code caffeinate} child) — see
+ * {@code IdleSleepGuardTest}.
+ *
+ * <p>Implementations must never throw. Every failure — wrong platform, missing tool, a spawn
+ * error — must show up as {@link #acquire()} returning {@code null}, so a caller can treat "no
+ * assertion held" and "the mechanism could not be used" identically and the fleet keeps running
+ * either way.
+ */
+public interface SleepAssertionMechanism {
+
+    /**
+     * Acquire a fresh assertion against idle sleep, or {@code null} when this mechanism is not
+     * usable right now (wrong platform, the tool is missing, the child process could not start).
+     * Never throws.
+     */
+    SleepAssertion acquire();
+}

fleetd/src/main/java/dev/ltms/fleet/rest/FleetApp.java

@@ -696,6 +696,10 @@ public final class FleetApp {
     /**
      * The worker's structured reply ({@code fleet_reply}) — resolves the blocking send awaiting
      * on this session, or queues the reply in the inbox when no send is open (CB-307).
+     *
+     * <p>fleetd #365: the response body's {@code delivered} field used to be unconditionally
+     * {@code true} for either case; it now reports whether a send/ticket was actually resolved,
+     * with {@code outcome} naming which (see {@link MessageService.ReplyOutcome}).
      */
     private void replyMessage(Context ctx) {
         String id = ctx.pathParam("id");
@@ -719,13 +723,19 @@ public final class FleetApp {
         // a WRONG value instead of failing loudly. The check lives in MessageService.reply so both
         // this door and FleetMcp.reply inherit the same rule; this catch only translates it into the
         // {error, detail} envelope this file uses everywhere else.
+        MessageService.ReplyOutcome outcome;
         try {
-            messages.reply(id, content);
+            outcome = messages.reply(id, content);
         } catch (IllegalArgumentException e) {
             ctx.status(400).json(Map.of("error", "bad_request", "detail", e.getMessage()));
             return;
         }
-        ctx.status(200).json(Map.of("sessionId", id, "delivered", true));
+        // fleetd #365: "delivered": true used to be unconditional here, whether the reply resolved
+        // a waiting send or was merely queued in the inbox for a later drain — the same gap
+        // FleetMcp.reply had over MCP. `delivered` now reflects which actually happened, and
+        // `outcome` names the specific case (see MessageService.ReplyOutcome).
+        ctx.status(200).json(Map.of("sessionId", id, "delivered", outcome.delivered(),
+                "outcome", outcome.wireName()));
     }
 
     /**

fleetd/src/main/java/dev/ltms/fleet/session/GitWorktrees.java

@@ -92,6 +92,15 @@ public final class GitWorktrees implements Worktrees {
     private final String configuredRoot;
     /** OS group name for {@link #shareWithGroup} (fleetd #185 stage 3); {@code null} ⇒ feature off. */
     private final String group;
+    /** Source directory of skill folders for {@link #seedSkills} (fleetd #362, {@code memberSkills:}
+     *  in config); {@code null} ⇒ feature off, no worktree is touched beyond today's behaviour. */
+    private final String memberSkillsSource;
+    /** Extra environment merged into every {@code git} subprocess this instance runs. Always {@code
+     *  Map.of()} from every production constructor. Test seam only (fleetd #362 review fix): lets
+     *  {@code GitWorktreesTest} point {@code GIT_CONFIG_GLOBAL} at an isolated temp file so it can
+     *  drive the real {@link #add} path against a controlled "operator's global git config" and
+     *  prove the excludesFile composition below without ever touching the real machine's config. */
+    private final Map<String, String> gitEnv;
     private final Consumer<String> afterWorktreeAdded;
     /** How the initial {@code git worktree add} command runs. Package-private test seam for an
      *  interrupted command after Git has made worktree state. */
@@ -125,7 +134,20 @@ public final class GitWorktrees implements Worktrees {
      *                       config); null/blank ⇒ {@link #shareWithGroup} is a no-op.
      */
     public GitWorktrees(String configuredRoot, String group) {
-        this(configuredRoot, group, _ -> {});
+        this(configuredRoot, group, (String) null);
+    }
+
+    /**
+     * @param configuredRoot     nullable absolute or relative path; null/blank derives a sibling of
+     *                           the repo root.
+     * @param group              optional OS group name (fleetd #185 stage 3, {@code worktreeGroup:}
+     *                           in config); null/blank ⇒ {@link #shareWithGroup} is a no-op.
+     * @param memberSkillsSource fleetd #362: optional directory of skill folders ({@code
+     *                           memberSkills:} in config) copied into every provisioned worktree's
+     *                           {@code .claude/skills/}; null/blank ⇒ {@link #seedSkills} is a no-op.
+     */
+    public GitWorktrees(String configuredRoot, String group, String memberSkillsSource) {
+        this(configuredRoot, group, _ -> {}, null, null, memberSkillsSource);
     }
 
     /** Test seam for changing a real worktree between its creation and its security check. */
@@ -135,13 +157,20 @@ public final class GitWorktrees implements Worktrees {
 
     /** Test seam combining a configurable {@code group} with {@link #afterWorktreeAdded}. */
     GitWorktrees(String configuredRoot, String group, Consumer<String> afterWorktreeAdded) {
-        this(configuredRoot, group, afterWorktreeAdded, null, null);
+        this(configuredRoot, group, afterWorktreeAdded, null, null, null);
     }
 
     /** Test seam for changing how {@link #shareWithGroup}'s processes run. */
     GitWorktrees(String configuredRoot, String group, Consumer<String> afterWorktreeAdded,
                   Function<String[], String> shareGroupRunner) {
-        this(configuredRoot, group, afterWorktreeAdded, shareGroupRunner, null);
+        this(configuredRoot, group, afterWorktreeAdded, shareGroupRunner, null, null);
+    }
+
+    /** Test seam for changing how the initial {@code git worktree add} command runs, with no
+     *  {@code memberSkillsSource} configured. */
+    GitWorktrees(String configuredRoot, String group, Consumer<String> afterWorktreeAdded,
+                  Function<String[], String> shareGroupRunner, Function<String[], String> worktreeAddRunner) {
+        this(configuredRoot, group, afterWorktreeAdded, shareGroupRunner, worktreeAddRunner, null);
     }
 
     /**
@@ -151,11 +180,30 @@ public final class GitWorktrees implements Worktrees {
      *
      * @param shareGroupRunner {@code null} ⇒ the real {@link #exec(String...)}.
      * @param worktreeAddRunner {@code null} ⇒ the real {@link #exec(String...)}.
+     * @param memberSkillsSource {@code null}/blank ⇒ {@link #seedSkills} is a no-op.
      */
     GitWorktrees(String configuredRoot, String group, Consumer<String> afterWorktreeAdded,
-                  Function<String[], String> shareGroupRunner, Function<String[], String> worktreeAddRunner) {
+                  Function<String[], String> shareGroupRunner, Function<String[], String> worktreeAddRunner,
+                  String memberSkillsSource) {
+        this(configuredRoot, group, afterWorktreeAdded, shareGroupRunner, worktreeAddRunner,
+                memberSkillsSource, Map.of());
+    }
+
+    /**
+     * Full test seam, plus {@code gitEnv} (fleetd #362 review fix, verification only): extra
+     * environment merged into every {@code git} subprocess this instance runs, so a test can isolate
+     * something like {@code GIT_CONFIG_GLOBAL} from the real machine while still driving the real
+     * {@link #add} path end to end. Every production constructor above delegates here with {@code
+     * Map.of()}.
+     */
+    GitWorktrees(String configuredRoot, String group, Consumer<String> afterWorktreeAdded,
+                  Function<String[], String> shareGroupRunner, Function<String[], String> worktreeAddRunner,
+                  String memberSkillsSource, Map<String, String> gitEnv) {
         this.configuredRoot = configuredRoot;
         this.group = (group == null || group.isBlank()) ? null : group;
+        this.memberSkillsSource = (memberSkillsSource == null || memberSkillsSource.isBlank())
+                ? null : memberSkillsSource;
+        this.gitEnv = gitEnv == null ? Map.of() : gitEnv;
         this.afterWorktreeAdded = afterWorktreeAdded == null ? _ -> {} : afterWorktreeAdded;
         this.shareGroupRunner = shareGroupRunner != null ? shareGroupRunner : this::exec;
         this.worktreeAddRunner = worktreeAddRunner != null ? worktreeAddRunner : this::exec;
@@ -184,6 +232,7 @@ public final class GitWorktrees implements Worktrees {
             configureEnvironmentCredentialHelper(repoRoot, wt);
             configureHttpsUrlRewriteForSshOrigin(repoRoot, wt);
             isolateToolSurface(wt);
+            seedSkills(wt);
         } catch (RuntimeException e) {
             cleanupAfterAddFailure(repoRoot, wt, branch, e);
             throw e;
@@ -574,6 +623,310 @@ public final class GitWorktrees implements Worktrees {
         return true;
     }
 
+    /**
+     * fleetd #362: copy each skill folder from the configured {@link #memberSkillsSource} directory
+     * into {@code <worktreePath>/.claude/skills/}, so a member spawned against ANY repo — not only
+     * one that already ships its own {@code .claude/skills/} — can load a bridge skill such as
+     * {@code implementer}. Every brief this fleet sends starts with {@code "Load the <name>
+     * skill."}; outside a repo carrying its own copy that line was previously a no-op.
+     *
+     * <p><b>No-op — nothing read, nothing written, nothing logged</b> — when {@link
+     * #memberSkillsSource} is null/blank (today's default), the same off-switch shape as
+     * {@link #shareWithGroup}.
+     *
+     * <p><b>Invariant 1 — a repo's own skill wins.</b> A skill folder already present at
+     * {@code <worktreePath>/.claude/skills/<name>} — because the just-checked-out branch commits its
+     * own copy — is left completely untouched: never overwritten, and never even opened.
+     *
+     * <p><b>Invariant 2 — a seeded skill can never end up in a worker's commit.</b> Every path this
+     * writes is untracked in the target repo (that is the whole reason it is being seeded), so
+     * {@code git status} would otherwise show each one as a new, addable, committable path. The
+     * repo-wide {@code .git/info/exclude} is NOT used for this: measured against a real linked
+     * worktree, that file resolves to the repository's COMMON git dir even from a worktree (the
+     * same file {@link dev.ltms.fleet.member.ClaudeCodeLauncher#writeIdeOverlay writeIdeOverlay}
+     * appends {@code CLAUDE.local.md} to), so an entry written there would hide the seeded skill
+     * from {@code git status} in the PRIMARY's own checkout and every sibling worktree too — not
+     * only this one. Instead, {@link #excludeSeededSkillsFromGitStatus} points {@code
+     * core.excludesFile} at a file scoped {@code --worktree} (the same {@code
+     * extensions.worktreeConfig} mechanism {@link #configureEnvironmentCredentialHelper} already
+     * relies on) that itself lives under this worktree's own private git dir ({@code
+     * .git/worktrees/<nonce>/}, OUTSIDE the working tree) — invisible to this worktree's {@code git
+     * status} and structurally impossible for this worktree to commit, with no effect on any other
+     * worktree or the primary checkout. Proven with a real {@code git status --porcelain} in
+     * {@code GitWorktreesTest}, not by reasoning.
+     *
+     * <p><b>Compose, don't replace.</b> {@code core.excludesFile} is single-valued: the first cut of
+     * this method pointed it at fleetd's own file with {@code --replace-all}, which SHADOWS whatever
+     * the operator's own (global, or repo-local) {@code core.excludesFile} was already resolving to
+     * inside this worktree, rather than adding to it. Measured concretely: this repo's own {@code
+     * .gitignore} does not ignore {@code target/} — only an operator's global excludesFile does — so
+     * every worker's {@code mvn clean install} would otherwise make {@code target/} appear as
+     * untracked, and {@link #hasUncommitted}'s deliberately-untracked-inclusive {@code git status
+     * --porcelain} (CB-576) would then read every such worktree as dirty forever, so it is never
+     * cleaned up. {@link #excludeSeededSkillsFromGitStatus} now reads whatever {@code
+     * core.excludesFile} resolves to BEFORE writing anything (falling back to git's own documented
+     * default, {@code $XDG_CONFIG_HOME/git/ignore} or {@code $HOME/.config/git/ignore}, when the key
+     * is unset entirely — see {@code gitignore(5)}), and writes that content into its OWN exclude
+     * file ahead of the seeded skill patterns, so every operator-configured pattern keeps applying
+     * inside the seeded worktree exactly as it did before seeding ran.
+     *
+     * <p>Instead of using worktree-scoped-config as an add-then-append (a second key does not exist
+     * for {@code core.excludesFile} — it takes exactly one value), an actual second exclude source
+     * was ruled out because git resolves only ONE {@code core.excludesFile}; concatenating the prior
+     * content into fleetd's own file is what "compose" reduces to for a single-valued key.
+     *
+     * <p>Proven the same way as invariant 2's own leak check: {@code
+     * GitWorktreesTest#seedSkillsComposesWithAnAlreadyEffectiveGlobalExcludesFile} isolates a
+     * synthetic "operator's global config" via {@code GIT_CONFIG_GLOBAL} (never the real machine's),
+     * seeds a skill, and asserts {@code git status --porcelain} is still empty for a file matching
+     * that global config's own ignore pattern.
+     *
+     * <p><b>Invariant 3 — best-effort.</b> A missing/unreadable {@link #memberSkillsSource}, or a
+     * copy/exclude failure, is logged and skipped — it must never fail the spawn, the same contract
+     * {@link #overlayParity} and {@link #isolateToolSurface} already hold.
+     *
+     * <p>Recorded for the worker itself the same way fleetd #134 records {@code
+     * fleet.neutralizedConfig}: {@code fleet.seededSkills} (one value per seeded skill folder) and
+     * {@code fleet.seededSkillsNote}, readable with {@code git config --worktree --get-all
+     * fleet.seededSkills}.
+     *
+     * <p><b>Claude Code specific by construction, not by a backend check here.</b> Only {@code
+     * .claude/skills/<name>/SKILL.md} is a path any launcher reads today (opencode's equivalent is a
+     * different shape under {@code .opencode/agent}, out of scope — see issue #362). This method
+     * only copies files; like {@link #isolateToolSurface} — which neutralizes BOTH {@code .mcp.json}
+     * and {@code opencode.json} unconditionally — it runs the same for every worktree regardless of
+     * which backend ultimately spawns into it, because the backend is not yet chosen at {@link #add}
+     * time. A seeded {@code .claude/skills/} directory in an opencode member's worktree is simply
+     * never read by that launcher.
+     */
+    private void seedSkills(String worktreePath) {
+        if (memberSkillsSource == null) {
+            return;
+        }
+        Path source = Path.of(memberSkillsSource).toAbsolutePath().normalize();
+        if (!Files.isDirectory(source)) {
+            log.warn("memberSkills source '{}' is not a directory — skipping skill seeding for worktree {}",
+                    source, worktreePath);
+            return;
+        }
+        Path skillsRoot = Path.of(worktreePath).resolve(".claude").resolve("skills");
+        List<String> seeded = new ArrayList<>();
+        List<String> kept = new ArrayList<>();
+        try (var candidates = Files.list(source)) {
+            for (Path candidate : candidates
+                    .filter(Files::isDirectory)
+                    .filter(p -> !p.getFileName().toString().startsWith("."))
+                    .sorted()
+                    .toList()) {
+                String name = candidate.getFileName().toString();
+                Path dst = skillsRoot.resolve(name);
+                if (Files.exists(dst)) {
+                    kept.add(name);
+                    continue;
+                }
+                copySkillDirectory(candidate, dst);
+                seeded.add(name);
+            }
+        } catch (IOException | RuntimeException e) {
+            log.warn("failed to seed skills into worktree {} from memberSkills source '{}': {}",
+                    worktreePath, source, e.getMessage());
+            return;
+        }
+        String detail = seeded.isEmpty() ? "" : "seeded: " + String.join(", ", seeded);
+        if (!kept.isEmpty()) {
+            detail += (detail.isEmpty() ? "" : "; ") + "kept the repo's own copy of: " + String.join(", ", kept);
+        }
+        if (detail.isEmpty()) {
+            detail = "no skill folders found under " + source;
+        }
+        log.info("skill seeding: {} of {} candidate(s) from {} into {}/.claude/skills — {}",
+                seeded.size(), seeded.size() + kept.size(), source, worktreePath, detail);
+        if (seeded.isEmpty()) {
+            return;
+        }
+        try {
+            excludeSeededSkillsFromGitStatus(worktreePath, seeded);
+            recordSeededSkillsForWorker(worktreePath, seeded);
+        } catch (RuntimeException e) {
+            log.warn("seeded skill(s) {} into {} but could not hide them from git status: {} — "
+                    + "they may show as untracked; never commit them", seeded, worktreePath, e.getMessage());
+        }
+    }
+
+    /** Recursively copy a skill folder ({@code src}) into a fresh destination ({@code dst}) that
+     *  {@link #seedSkills} has already confirmed does not exist, preserving the directory structure
+     *  (e.g. {@code implementer/SKILL.md}, {@code implementer/references/...}). */
+    private static void copySkillDirectory(Path src, Path dst) {
+        try (var walk = Files.walk(src)) {
+            for (Path path : walk.sorted().toList()) {
+                Path target = dst.resolve(src.relativize(path).toString());
+                if (Files.isDirectory(path)) {
+                    Files.createDirectories(target);
+                } else {
+                    Files.createDirectories(target.getParent());
+                    Files.copy(path, target, StandardCopyOption.COPY_ATTRIBUTES);
+                }
+            }
+        } catch (IOException e) {
+            throw new WorktreeException("cannot copy skill directory " + src + " -> " + dst + ": "
+                    + e.getMessage(), e);
+        }
+    }
+
+    /**
+     * Make every path in {@code seededSkillNames} (each a name under {@code .claude/skills/})
+     * invisible to {@code git status} in THIS worktree only — see the invariant-2 discussion on
+     * {@link #seedSkills}. Sets {@code core.excludesFile} scoped {@code --worktree} to a file
+     * written under this worktree's own private git dir ({@code git rev-parse
+     * --absolute-git-dir}), which lives outside the working tree, so the exclude file itself can
+     * never be committed either.
+     *
+     * <p><b>Compose, don't replace.</b> {@code core.excludesFile} is single-valued, so pointing it at
+     * fleetd's own file would otherwise SHADOW whatever excludesFile this worktree was already
+     * resolving (an operator's global config, most commonly) rather than add to it — see the
+     * "Compose, don't replace" discussion on {@link #seedSkills}. {@link
+     * #previouslyEffectiveExcludesFileContent} is read BEFORE this method's own {@code --worktree}
+     * write below, so it still sees whatever was effective beforehand; that content is written into
+     * fleetd's own exclude file ahead of the seeded skill patterns, and the worktree-scoped override
+     * then points at that combined file — so every pattern the operator's own configuration already
+     * applied keeps applying, plus the seeded skill paths.
+     *
+     * <p><b>Assumes a fresh worktree — not idempotent.</b> {@link #seedSkills} only ever calls this
+     * from {@link #add}, which always creates a brand-new worktree, so {@code core.excludesFile} is
+     * never already worktree-scoped-set to fleetd's own file when this runs. A hypothetical second
+     * call on the SAME worktree would read fleetd's own already-composed file back as "previously
+     * effective" (worktree scope now wins) and append the seeded patterns a second time — harmless
+     * to {@code git status} (duplicate exclude lines are a no-op), but not something to rely on. No
+     * guard is added for this because the path does not exist today; if a future caller ever seeds
+     * the same worktree twice, it will need one.
+     */
+    private void excludeSeededSkillsFromGitStatus(String worktreePath, List<String> seededSkillNames) {
+        exec("git", "-C", worktreePath, "config", "extensions.worktreeConfig", "true");
+        String previouslyEffective = previouslyEffectiveExcludesFileContent(worktreePath);
+        String gitDir = exec("git", "-C", worktreePath, "rev-parse", "--absolute-git-dir").trim();
+        Path excludeFile = Path.of(gitDir, "fleet-seeded-skills-exclude");
+        StringBuilder patterns = new StringBuilder();
+        if (!previouslyEffective.isEmpty()) {
+            patterns.append(previouslyEffective);
+        }
+        for (String name : seededSkillNames) {
+            patterns.append("/.claude/skills/").append(name).append('/').append(System.lineSeparator());
+        }
+        try {
+            Files.writeString(excludeFile, patterns.toString());
+        } catch (IOException e) {
+            throw new WorktreeException("cannot write skills exclude file " + excludeFile + ": "
+                    + e.getMessage(), e);
+        }
+        exec("git", "-C", worktreePath, "config", "--worktree", "--replace-all", "core.excludesFile",
+                excludeFile.toString());
+    }
+
+    /**
+     * The content of whatever {@code core.excludesFile} resolves to for {@code worktreePath} right
+     * now — BEFORE {@link #excludeSeededSkillsFromGitStatus} points that key at fleetd's own file —
+     * so it can be carried forward instead of shadowed. {@code --type=path} makes git itself perform
+     * {@code ~}/{@code ~user} expansion the same way it would when actually reading the key to build
+     * exclude rules, rather than handing back a raw, unexpanded config string.
+     *
+     * <p>When the key is unset entirely (exit code non-zero), falls back to git's own documented
+     * default excludes file — {@code $XDG_CONFIG_HOME/git/ignore}, or {@code
+     * $HOME/.config/git/ignore} when that variable is unset — per {@code gitignore(5)}: git applies
+     * that file even with no {@code core.excludesFile} configured at all, so skipping it here would
+     * silently drop patterns an operator never had to configure to get.
+     *
+     * <p>Never throws: a missing, unreadable, or unresolvable file is treated as "nothing to carry
+     * forward" (empty string) — this is a best-effort read in service of {@link #seedSkills}'s own
+     * invariant 3, not a new way for skill seeding to fail a spawn.
+     *
+     * <p><b>Review fix, finding 2.</b> The XDG-fallback branch below does not go through {@code git}
+     * at all, so a first cut of it read {@code XDG_CONFIG_HOME}/{@code HOME} straight from the JVM's
+     * own environment ({@link System#getenv} / {@code user.home}) — unlike every other value this
+     * class resolves, which goes through a {@code git} subprocess and therefore already honours
+     * {@link #gitEnv}. That meant no test could make this branch hermetic, and on any machine
+     * carrying a real {@code ~/.config/git/ignore} (this repo's own dev machine does), every
+     * skill-seeding test silently composed with that real file — correct in production, but
+     * machine-dependent in the test suite, and a future broader pattern in that real file could
+     * silently change what a seeded worktree's {@code git status} reports depending on whose home
+     * directory ran the test. {@link #resolveEnv} now checks {@link #gitEnv} first for both
+     * variables, falling back to the JVM's real environment only when the seam does not supply
+     * them — production behaviour (empty {@link #gitEnv}) is unchanged, and a test can now isolate
+     * this branch exactly as it already isolates every {@code git} subprocess call.
+     *
+     * <p><b>Snapshot, not a reference.</b> The content below is read once, at seeding time, and
+     * copied into fleetd's own exclude file. If the operator edits their global excludesFile
+     * afterward, an already-seeded worktree keeps the old copy — acceptable for a worktree's
+     * expected lifetime, but worth knowing before reading a stale pattern as a bug.
+     *
+     * @return the file's content, trailing-newline-normalized, or {@code ""} when there is nothing
+     *         to compose with.
+     */
+    private String previouslyEffectiveExcludesFileContent(String worktreePath) {
+        String resolvedPath;
+        if (exitCode("git", "-C", worktreePath, "config", "--get", "--type=path", "core.excludesFile") == 0) {
+            resolvedPath = exec("git", "-C", worktreePath, "config", "--get", "--type=path",
+                    "core.excludesFile").trim();
+        } else {
+            String xdgConfigHome = resolveEnv("XDG_CONFIG_HOME");
+            Path fallback = (xdgConfigHome != null && !xdgConfigHome.isBlank())
+                    ? Path.of(xdgConfigHome, "git", "ignore")
+                    : Path.of(resolveHome(), ".config", "git", "ignore");
+            resolvedPath = fallback.toString();
+        }
+        if (resolvedPath.isBlank()) {
+            return "";
+        }
+        Path file = Path.of(resolvedPath);
+        if (!Files.isRegularFile(file) || !Files.isReadable(file)) {
+            return "";
+        }
+        try {
+            String content = Files.readString(file);
+            return content.isBlank() ? "" : content.stripTrailing() + System.lineSeparator();
+        } catch (IOException e) {
+            log.warn("could not read previously-effective excludesFile {} while seeding skills into "
+                    + "{}: {} — its patterns will not carry forward into the seeded worktree",
+                    file, worktreePath, e.getMessage());
+            return "";
+        }
+    }
+
+    /**
+     * Resolve environment variable {@code name} for {@link #previouslyEffectiveExcludesFileContent}'s
+     * XDG fallback, checking {@link #gitEnv} FIRST so a test can isolate this the same way it
+     * already isolates every {@code git} subprocess this class runs, and falling back to the JVM's
+     * real environment only when the seam does not supply it (always the case in production, where
+     * {@link #gitEnv} is {@code Map.of()}).
+     */
+    private String resolveEnv(String name) {
+        String fromSeam = gitEnv.get(name);
+        return fromSeam != null ? fromSeam : System.getenv(name);
+    }
+
+    /** Same as {@link #resolveEnv(String)}, for {@code HOME} — falls back to {@code user.home}
+     *  (rather than {@code System.getenv("HOME")}) when the seam does not supply it, matching this
+     *  class's pre-existing behaviour for every other home-directory resolution. */
+    private String resolveHome() {
+        String fromSeam = gitEnv.get("HOME");
+        return fromSeam != null ? fromSeam : System.getProperty("user.home");
+    }
+
+    /**
+     * The worker-readable half of fleetd #362, mirroring {@link #recordNeutralizedConfigForWorker}:
+     * record which skill folders were seeded where the worker itself can read it, without a
+     * working-tree file that would show up in {@code git status}.
+     */
+    private void recordSeededSkillsForWorker(String worktreePath, List<String> seeded) {
+        exec("git", "-C", worktreePath, "config", "extensions.worktreeConfig", "true");
+        for (String name : seeded) {
+            exec("git", "-C", worktreePath, "config", "--worktree", "--add", "fleet.seededSkills", name);
+        }
+        exec("git", "-C", worktreePath, "config", "--worktree", "fleet.seededSkillsNote",
+                "each fleet.seededSkills value names a skill folder fleetd copied into "
+                        + ".claude/skills/ because this repo did not already ship it; it is excluded "
+                        + "from git status (core.excludesFile, worktree-scoped) and must never be committed");
+    }
+
     @Override
     public void remove(String repoRoot, String worktreePath) {
         Path p = Path.of(worktreePath);
@@ -1084,6 +1437,9 @@ public final class GitWorktrees implements Worktrees {
         Process p;
         try {
             ProcessBuilder pb = new ProcessBuilder(command).redirectErrorStream(true);
+            if (!gitEnv.isEmpty()) {
+                pb.environment().putAll(gitEnv);
+            }
             if (extraEnv != null && !extraEnv.isEmpty()) {
                 pb.environment().putAll(extraEnv);
             }
@@ -1119,7 +1475,11 @@ public final class GitWorktrees implements Worktrees {
     private int exitCode(String... command) {
         Process p;
         try {
-            p = new ProcessBuilder(command).redirectErrorStream(true).start();
+            ProcessBuilder pb = new ProcessBuilder(command).redirectErrorStream(true);
+            if (!gitEnv.isEmpty()) {
+                pb.environment().putAll(gitEnv);
+            }
+            p = pb.start();
         } catch (IOException e) {
             throw new WorktreeException("failed to start " + command[0] + ": " + e.getMessage(), e);
         }

fleetd/src/test/java/dev/ltms/fleet/FleetdLeadMailboxSelectionTest.java

@@ -80,7 +80,7 @@ class FleetdLeadMailboxSelectionTest {
     @Test
     void opensTheMailboxWhenAUriAndSelfIdAreConfigured() {
         var opener = new RecordingOpener();
-        var coordinator = new FleetConfig.Coordinator(RESOLVED_URI, null, "mac-opus", null);
+        var coordinator = new FleetConfig.Coordinator(RESOLVED_URI, null, "mac-opus", null, null);
 
         Fleetd.openLeadMailbox(coordinator, Map.of(), opener);
 
@@ -94,7 +94,7 @@ class FleetdLeadMailboxSelectionTest {
     void honoursUriEnvOverALiteralUri() {
         var opener = new RecordingOpener();
         var coordinator = new FleetConfig.Coordinator("amqp://stale:stale@old:5672/x", "COORD_URI",
-                "mac-opus", 8);
+                "mac-opus", 8, null);
 
         Fleetd.openLeadMailbox(coordinator, Map.of("COORD_URI", RESOLVED_URI), opener);
 
@@ -105,7 +105,7 @@ class FleetdLeadMailboxSelectionTest {
     @Test
     void turnsOffWhenUriEnvDoesNotResolve() {
         var opener = new RecordingOpener();
-        var coordinator = new FleetConfig.Coordinator(null, "COORD_URI", "mac-opus", null);
+        var coordinator = new FleetConfig.Coordinator(null, "COORD_URI", "mac-opus", null, null);
 
         assertNull(Fleetd.openLeadMailbox(coordinator, Map.of(), opener));
 
@@ -116,7 +116,7 @@ class FleetdLeadMailboxSelectionTest {
     void warnsAndStaysOffWhenSelfIdIsMissing() {
         var appender = captureFleetdLogs();
         var opener = new RecordingOpener();
-        var coordinator = new FleetConfig.Coordinator(RESOLVED_URI, null, null, null);
+        var coordinator = new FleetConfig.Coordinator(RESOLVED_URI, null, null, null, null);
 
         assertNull(Fleetd.openLeadMailbox(coordinator, Map.of(), opener));
 
@@ -131,7 +131,7 @@ class FleetdLeadMailboxSelectionTest {
         var appender = captureFleetdLogs();
         var opener = new RecordingOpener();
         opener.unreachable = true;
-        var coordinator = new FleetConfig.Coordinator(RESOLVED_URI, null, "mac-opus", null);
+        var coordinator = new FleetConfig.Coordinator(RESOLVED_URI, null, "mac-opus", null, null);
 
         assertNull(Fleetd.openLeadMailbox(coordinator, Map.of(), opener),
                 "a down coordination broker turns the feature off; it must never take the daemon down");

fleetd/src/test/java/dev/ltms/fleet/GitHostShapeReportTest.java

@@ -0,0 +1,241 @@
+package dev.ltms.fleet;
+
+import ch.qos.logback.classic.Level;
+import ch.qos.logback.classic.Logger;
+import ch.qos.logback.classic.spi.ILoggingEvent;
+import ch.qos.logback.core.read.ListAppender;
+import dev.ltms.fleet.config.FleetConfig;
+import org.junit.jupiter.api.Test;
+import org.junit.jupiter.api.io.TempDir;
+import org.slf4j.LoggerFactory;
+
+import java.nio.file.Files;
+import java.nio.file.Path;
+import java.util.List;
+import java.util.Map;
+
+import static org.junit.jupiter.api.Assertions.assertEquals;
+import static org.junit.jupiter.api.Assertions.assertFalse;
+import static org.junit.jupiter.api.Assertions.assertTrue;
+
+/**
+ * fleetd #377: the startup git host line must report the <em>shape</em> of the value a
+ * member receives as GITEA_HOST — set or unset, length, scheme, trailing slash — and the
+ * value itself must never reach the log.
+ */
+class GitHostShapeReportTest {
+
+    /** A profile that opts in to the git-forge token, so GITEA_HOST is the var that matters. */
+    private static final String GIT_TOKEN_CONFIG = """
+            profiles:
+              local:
+                baseUrl: http://gx00.gw:8000
+                gitTokenEnv: WORKER_GITEA_TOKEN
+            """;
+
+    private static FleetConfig load(Path dir, String yaml) throws Exception {
+        Path f = dir.resolve("fleetd.yaml");
+        Files.writeString(f, yaml);
+        return FleetConfig.load(f);
+    }
+
+    /**
+     * The level this logger had before {@link #attach()} raised it, so {@link #detach} can put it
+     * back. {@code null} is a real value here — it means "inherit from the parent" — and that is
+     * exactly the state this logger starts in, so it must be restored as {@code null} rather than
+     * as some concrete level.
+     */
+    private static Level originalLevel;
+
+    /**
+     * fleetd #377: the shape lines are logged at INFO, and {@code logback-test.xml} sets
+     * {@code dev.ltms.fleet} to WARN — so INFO events are dropped by the level check BEFORE any
+     * appender sees them. Attaching an appender is therefore not enough: without raising the level
+     * the list stays empty and every assertion below fails against correct production code. The
+     * sibling report tests do the same thing at each call site (see
+     * {@code MemberTrustModelReportTest}); doing it here keeps it in one place.
+     */
+    private static ListAppender<ILoggingEvent> attach() {
+        Logger logger = (Logger) LoggerFactory.getLogger(Fleetd.class);
+        originalLevel = logger.getLevel();
+        logger.setLevel(Level.INFO);
+        ListAppender<ILoggingEvent> appender = new ListAppender<>();
+        appender.start();
+        logger.addAppender(appender);
+        return appender;
+    }
+
+    private static void detach(ListAppender<ILoggingEvent> appender) {
+        Logger logger = (Logger) LoggerFactory.getLogger(Fleetd.class);
+        logger.detachAppender(appender);
+        logger.setLevel(originalLevel);
+    }
+
+    private static List<String> messages(ListAppender<ILoggingEvent> appender) {
+        return appender.list.stream().map(ILoggingEvent::getFormattedMessage).toList();
+    }
+
+    @Test
+    void setLineReportsLengthSchemeAndTrailingSlash(@TempDir Path dir) throws Exception {
+        FleetConfig cfg = load(dir, GIT_TOKEN_CONFIG);
+        String value = "https://git.example.test/";
+
+        ListAppender<ILoggingEvent> appender = attach();
+        try {
+            Fleetd.reportGitHostShape(cfg, Map.of("GITEA_HOST", value));
+        } finally {
+            detach(appender);
+        }
+
+        String expected = "startup git host GITEA_HOST: set (profile 'local' gitHostEnv) — "
+                + "length=" + value.length() + ", startsWithScheme=true, trailingSlash=true";
+        assertTrue(messages(appender).contains(expected),
+                "a value with a scheme and a trailing slash must be reported by shape only: "
+                        + "its length, startsWithScheme=true, trailingSlash=true");
+    }
+
+    @Test
+    void bareHostLineReportsNoSchemeNoTrailingSlash(@TempDir Path dir) throws Exception {
+        FleetConfig cfg = load(dir, GIT_TOKEN_CONFIG);
+        String value = "git.example.test";
+
+        ListAppender<ILoggingEvent> appender = attach();
+        try {
+            Fleetd.reportGitHostShape(cfg, Map.of("GITEA_HOST", value));
+        } finally {
+            detach(appender);
+        }
+
+        String expected = "startup git host GITEA_HOST: set (profile 'local' gitHostEnv) — "
+                + "length=" + value.length() + ", startsWithScheme=false, trailingSlash=false";
+        assertTrue(messages(appender).contains(expected),
+                "a bare host name must report startsWithScheme=false, trailingSlash=false");
+    }
+
+    @Test
+    void unsetVariableIsLoggedAtInfoAndDoesNotThrow(@TempDir Path dir) throws Exception {
+        FleetConfig cfg = load(dir, GIT_TOKEN_CONFIG);
+
+        ListAppender<ILoggingEvent> appender = attach();
+        try {
+            // GITEA_HOST absent from the map entirely — the unset case must not throw.
+            Fleetd.reportGitHostShape(cfg, Map.of());
+        } finally {
+            detach(appender);
+        }
+
+        assertTrue(appender.list.stream().anyMatch(e ->
+                        e.getLevel() == Level.INFO
+                                && e.getFormattedMessage()
+                                    .startsWith("startup git host GITEA_HOST: unset (profile 'local' gitHostEnv)")),
+                "an unset git host is useful information, not an error — say it at INFO level");
+    }
+
+    /**
+     * The important test: the value must NEVER appear in the log output. This test fails if the
+     * line is ever changed to include the value, because it drives the real logging path with a
+     * value that carries a marker no shape field could contain.
+     */
+    @Test
+    void theValueNeverAppearsInLogOutput(@TempDir Path dir) throws Exception {
+        FleetConfig cfg = load(dir, GIT_TOKEN_CONFIG);
+        String marker = "never-logged-host-shape-377";
+        String value = "https://" + marker + "/";
+
+        ListAppender<ILoggingEvent> appender = attach();
+        try {
+            Fleetd.reportGitHostShape(cfg, Map.of("GITEA_HOST", value));
+        } finally {
+            detach(appender);
+        }
+
+        List<String> msgs = messages(appender);
+        assertFalse(msgs.stream().anyMatch(m -> m.contains(value)),
+                "the full GITEA_HOST value must never reach the log");
+        assertFalse(msgs.stream().anyMatch(m -> m.contains(marker)),
+                "no fragment of the value may reach the log — a line that embeds the value"
+                        + " would leak at least this marker");
+        assertTrue(msgs.stream().anyMatch(m -> m.contains("startsWithScheme=true")
+                        && m.contains("trailingSlash=true")),
+                "the shape must still be reported although the value is not");
+    }
+
+    @Test
+    void unsetReportAlsoCarriesNoValue(@TempDir Path dir) throws Exception {
+        FleetConfig cfg = load(dir, GIT_TOKEN_CONFIG);
+        // A blank value is not injected either (putIfPresent skips it), so it must report unset
+        // without echoing anything of it.
+        ListAppender<ILoggingEvent> appender = attach();
+        try {
+            Fleetd.reportGitHostShape(cfg, Map.of("GITEA_HOST", "  "));
+        } finally {
+            detach(appender);
+        }
+
+        assertTrue(messages(appender).stream().anyMatch(m ->
+                        m.startsWith("startup git host GITEA_HOST: unset")),
+                "a blank value is skipped by the launcher, so the line reports unset");
+    }
+
+    @Test
+    void defaultGitHostEnvIsGITEA_HOST(@TempDir Path dir) throws Exception {
+        FleetConfig cfg = load(dir, GIT_TOKEN_CONFIG);
+
+        assertEquals(Map.of("GITEA_HOST", List.of("profile 'local' gitHostEnv")),
+                Fleetd.gitHostEnvVars(cfg));
+    }
+
+    @Test
+    void explicitGitHostEnvReportsUnderItsOwnName(@TempDir Path dir) throws Exception {
+        FleetConfig cfg = load(dir, """
+                profiles:
+                  local:
+                    baseUrl: http://gx00.gw:8000
+                    gitTokenEnv: WORKER_GITEA_TOKEN
+                    gitHostEnv: MY_FORGE_HOST
+                """);
+        String value = "https://forge.example.test/";
+
+        ListAppender<ILoggingEvent> appender = attach();
+        try {
+            Fleetd.reportGitHostShape(cfg, Map.of("MY_FORGE_HOST", value));
+        } finally {
+            detach(appender);
+        }
+
+        assertTrue(messages(appender).contains(
+                        "startup git host MY_FORGE_HOST: set (profile 'local' gitHostEnv) — "
+                                + "length=" + value.length()
+                                + ", startsWithScheme=true, trailingSlash=true"),
+                "an explicitly named gitHostEnv is reported under that name");
+    }
+
+    @Test
+    void noGitTokenMeansNoHostLineIsNeeded(@TempDir Path dir) throws Exception {
+        FleetConfig cfg = load(dir, """
+                profiles:
+                  local:
+                    baseUrl: http://gx00.gw:8000
+                """);
+
+        ListAppender<ILoggingEvent> appender = attach();
+        try {
+            Fleetd.reportGitHostShape(cfg, Map.of());
+        } finally {
+            detach(appender);
+        }
+
+        assertEquals(List.of("startup git host: no profile sets a gitTokenEnv — nothing to check"),
+                messages(appender));
+    }
+
+    @Test
+    void aHostWithAPortIsNotTreatedAsAScheme() {
+        assertFalse(Fleetd.startsWithScheme("git.example.test"));
+        assertFalse(Fleetd.startsWithScheme("git.example.test:3000"));
+        assertFalse(Fleetd.startsWithScheme("git.example.test:3000/"));
+        assertTrue(Fleetd.startsWithScheme("https://git.example.test"));
+        assertTrue(Fleetd.startsWithScheme("https://git.example.test:3000/"));
+        assertTrue(Fleetd.startsWithScheme("ssh://git.example.test"));
+    }
+}

fleetd/src/test/java/dev/ltms/fleet/config/ConfigRefTopLevelReportingCoverageTest.java

@@ -104,9 +104,11 @@ class ConfigRefTopLevelReportingCoverageTest {
         v.put("configReload", new FleetConfig.ConfigReload(true, 10));
         v.put("quarantineCooldownSeconds", 1800);
         v.put("memberCredentials", null);
-        v.put("coordinator", new FleetConfig.Coordinator("amqp://coord-a", null, "self-a", 1));
+        v.put("coordinator", new FleetConfig.Coordinator("amqp://coord-a", null, "self-a", 1, null));
         v.put("worktreeGroup", "group-a");
         v.put("memberLoginShell", null);
+        v.put("memberSkills", "/skills/a");
+        v.put("idleSleepGuard", new FleetConfig.IdleSleepGuard(true));
         assertNamesMatchComponents(v);
         return v;
     }
@@ -144,9 +146,11 @@ class ConfigRefTopLevelReportingCoverageTest {
         v.put("configReload", new FleetConfig.ConfigReload(false, 20));
         v.put("quarantineCooldownSeconds", 3600);
         v.put("memberCredentials", null);
-        v.put("coordinator", new FleetConfig.Coordinator("amqp://coord-b", null, "self-b", 2));
+        v.put("coordinator", new FleetConfig.Coordinator("amqp://coord-b", null, "self-b", 2, null));
         v.put("worktreeGroup", "group-b");
         v.put("memberLoginShell", null);
+        v.put("memberSkills", "/skills/b");
+        v.put("idleSleepGuard", new FleetConfig.IdleSleepGuard(false));
         assertNamesMatchComponents(v);
         return v;
     }

fleetd/src/test/java/dev/ltms/fleet/config/FleetConfigProfileWithProfilePreservesEveryComponentTest.java

@@ -0,0 +1,172 @@
+package dev.ltms.fleet.config;
+
+import org.junit.jupiter.api.Test;
+
+import java.lang.reflect.Constructor;
+import java.lang.reflect.RecordComponent;
+import java.util.ArrayList;
+import java.util.Arrays;
+import java.util.LinkedHashMap;
+import java.util.List;
+import java.util.Locale;
+import java.util.Map;
+import java.util.Objects;
+import java.util.Set;
+import java.util.TreeSet;
+
+import static org.junit.jupiter.api.Assertions.assertEquals;
+
+/**
+ * Fleetd #358, the same "defect factory" #357 guarded on {@code FleetConfig.withDefaults()}
+ * (see {@code FleetConfigWithDefaultsPreservesEveryComponentTest}), reproduced here on
+ * {@link FleetConfig.Profile}. {@code Profile} carries a long back-compat constructor ladder — 8
+ * constructors, re-counted directly against the source rather than trusted from the ticket, at
+ * arities 25, 24, 22, 20, 18, 15, 14 and 12, against a canonical arity of 26 — and exactly ONE
+ * rebuild site, {@link FleetConfig.Profile#withProfile(String)}, whose own
+ * {@code return new Profile(...)} call is written at a literal 26-arg count. Add a 27th component
+ * and its established back-compat constructor at the old (26-arg) arity, and {@code withProfile}'s
+ * own call becomes a legal match for that new overload — silently dropping the new component every
+ * time a profile's name is defaulted from its {@code workers:} key.
+ *
+ * <p>Builds one {@link FleetConfig.Profile} through the TRUE canonical constructor — resolved by
+ * the record's own component types via {@code getDeclaredConstructor}, never by argument count —
+ * with a real, distinctive, non-null value in every component, calls {@link
+ * FleetConfig.Profile#withProfile(String)}, and asserts every component except {@code profile}
+ * itself survives unchanged, while {@code profile} comes back as the new name it was given.
+ *
+ * <p>Every value here is chosen so {@code Profile}'s own compact constructor (which normalizes
+ * several components — defaults {@code argv}/{@code kind}/{@code placement}/{@code workspace}/
+ * {@code gitHostEnv}, nulls a handful of blank-checked strings, clamps {@code weight}, coerces
+ * {@code subscription}) leaves it unchanged: every String is non-blank and already in the shape the
+ * compact constructor would otherwise coerce it to (e.g. {@code placement} is already lowercase),
+ * and every collection is non-empty. That is what makes "must survive unchanged" a valid assertion
+ * for every component below, the same reasoning {@code FleetConfigWithDefaultsPreservesEveryComponentTest}
+ * documents for {@code withDefaults()}.
+ *
+ * <p>{@link #EXCLUDED_FROM_SURVIVAL_CHECK} is kept deliberately empty and size-pinned by
+ * {@link #exclusionListSizeIsPinned()} — a checker whose escape hatch can grow to silence a failure
+ * is not a checker. Every one of {@code Profile}'s 26 current components has a real, non-null,
+ * non-blank value here and none is excluded.
+ */
+class FleetConfigProfileWithProfilePreservesEveryComponentTest {
+
+    private static final RecordComponent[] COMPONENTS = FleetConfig.Profile.class.getRecordComponents();
+
+    /** Deliberately empty today; grow it only with a matching justification, and re-pin the size. */
+    private static final Set<String> EXCLUDED_FROM_SURVIVAL_CHECK = Set.of();
+
+    /** One real, distinctive, non-null value per component, chosen to survive the compact ctor. */
+    private static Map<String, Object> baseValues() {
+        Map<String, Object> v = new LinkedHashMap<>();
+        v.put("profile", "profile-guard");
+        v.put("baseUrl", "https://guard.example/base");
+        v.put("model", "model-guard");
+        v.put("configDir", "/config/guard");
+        v.put("tokenEnv", "GUARD_TOKEN");
+        v.put("argv", List.of("guard-cmd"));
+        v.put("placement", "guard-placement");
+        v.put("workspace", "workspace-guard");
+        v.put("tabLabel", "tab-guard");
+        v.put("mcpUrl", "https://mcp.guard/");
+        v.put("cwd", "/cwd/guard");
+        v.put("parityOverlay", List.of(".guardrc"));
+        v.put("gitTokenEnv", "GUARD_GIT_TOKEN");
+        v.put("gitHostEnv", "GUARD_GIT_HOST");
+        v.put("kind", "claude-code");
+        v.put("env", Map.of("GUARD_ENV", "1"));
+        v.put("weight", 2.5f);
+        v.put("maxLoad", 4);
+        v.put("subscription", Boolean.TRUE);
+        v.put("exhaustedPattern", "pattern-guard");
+        v.put("credentialId", "cred-guard");
+        v.put("ideMcpUrl", "https://ide.guard/");
+        v.put("ideProjectDir", "ide-project-guard");
+        v.put("ideOpenCommand", "open-guard {dir}");
+        v.put("autoCompactWindow", 150_000);
+        v.put("errorPattern", "error-pattern-guard");
+        assertNamesMatchComponents(v);
+        return v;
+    }
+
+    /**
+     * Guards {@link #baseValues()} itself against drifting from the record's real shape — forgetting
+     * to add a new component here fails this assertion by name, rather than silently checking one
+     * component fewer than the record has.
+     */
+    private static void assertNamesMatchComponents(Map<String, Object> values) {
+        Set<String> names = new TreeSet<>();
+        for (RecordComponent rc : COMPONENTS) {
+            names.add(rc.getName());
+        }
+        assertEquals(names, new TreeSet<>(values.keySet()),
+                "this test's value map has drifted from FleetConfig.Profile's actual components — "
+                        + "update baseValues() alongside the record");
+    }
+
+    /**
+     * Builds a {@link FleetConfig.Profile} through the TRUE canonical constructor — resolved by the
+     * record's own component types, not by argument count — so this never accidentally exercises a
+     * back-compat overload the way a literal {@code new Profile(...)} call risks doing.
+     */
+    private static FleetConfig.Profile profileOf(Map<String, Object> values) throws ReflectiveOperationException {
+        Class<?>[] types = Arrays.stream(COMPONENTS).map(RecordComponent::getType).toArray(Class<?>[]::new);
+        Object[] args = Arrays.stream(COMPONENTS).map(rc -> values.get(rc.getName())).toArray();
+        Constructor<FleetConfig.Profile> ctor = FleetConfig.Profile.class.getDeclaredConstructor(types);
+        return ctor.newInstance(args);
+    }
+
+    @Test
+    void exclusionListSizeIsPinned() {
+        assertEquals(0, EXCLUDED_FROM_SURVIVAL_CHECK.size(),
+                "EXCLUDED_FROM_SURVIVAL_CHECK grew from 0 — every entry needs a justification in "
+                        + "this test class's javadoc AND this assertion re-pinned to the new size; a "
+                        + "growing exclusion list that silences failures on its own is not a guard");
+    }
+
+    /**
+     * The mutation this is built to catch: make {@code withProfile(String)}'s final constructor call
+     * literal at some arg count, add one more component to the record with a new back-compat
+     * constructor at the old arity, and the stale call silently rebinds. Every component here is real
+     * and non-null/non-blank, so none of it should be replaced by {@code withProfile}, except
+     * {@code profile} itself, which the method is documented to replace.
+     */
+    @Test
+    void withProfilePreservesEveryOtherComponent() throws ReflectiveOperationException {
+        Map<String, Object> base = baseValues();
+        FleetConfig.Profile profile = profileOf(base);
+        FleetConfig.Profile renamed = profile.withProfile("renamed-profile-guard");
+
+        List<String> dropped = new ArrayList<>();
+        int checked = 0;
+        for (RecordComponent rc : COMPONENTS) {
+            String name = rc.getName();
+            if (EXCLUDED_FROM_SURVIVAL_CHECK.contains(name)) {
+                continue;
+            }
+            checked++;
+            Object expected = "profile".equals(name) ? "renamed-profile-guard" : base.get(name);
+            Object actual;
+            try {
+                actual = rc.getAccessor().invoke(renamed);
+            } catch (ReflectiveOperationException e) {
+                throw new RuntimeException("failed to read FleetConfig.Profile." + name + "()", e);
+            }
+            if (!Objects.equals(expected, actual)) {
+                dropped.add(String.format(Locale.ROOT,
+                        "%s: withProfile() was expected to carry (%s) for '%s' but returned %s — a "
+                                + "component silently dropped by withProfile(), the shape of the "
+                                + "defect this test exists to catch (its final \"return new "
+                                + "Profile(...)\" call binding to a back-compat constructor instead "
+                                + "of the true canonical one)",
+                        name, expected, name, actual));
+            }
+        }
+
+        System.out.printf(Locale.ROOT,
+                "FleetConfig.Profile.withProfile() component-survival coverage — %d components, %d "
+                        + "checked, %d excluded, %d survived%n",
+                COMPONENTS.length, checked, EXCLUDED_FROM_SURVIVAL_CHECK.size(), checked - dropped.size());
+        assertEquals(List.of(), dropped,
+                "withProfile() silently dropped these components: " + dropped);
+    }
+}

fleetd/src/test/java/dev/ltms/fleet/config/FleetConfigTest.java

@@ -1189,7 +1189,7 @@ class FleetConfigTest {
     @Test
     void coordinatorEffectiveUriHonorsUriEnv() {
         FleetConfig.Coordinator withEnv = new FleetConfig.Coordinator(
-                "amqp://stale-clear-text@127.0.0.1:5672/coord", "LEAD_COORD_URI", "fleet01-lead", null);
+                "amqp://stale-clear-text@127.0.0.1:5672/coord", "LEAD_COORD_URI", "fleet01-lead", null, null);
 
         assertEquals("amqp://from-env@127.0.0.1:5672/coord",
                 withEnv.effectiveUri(Map.of("LEAD_COORD_URI", "amqp://from-env@127.0.0.1:5672/coord")),
@@ -1200,12 +1200,61 @@ class FleetConfigTest {
                 "a blank uriEnv variable must not fall back to the literal uri");
 
         FleetConfig.Coordinator noEnv = new FleetConfig.Coordinator(
-                "amqp://guest:guest@127.0.0.1:5672/coord", null, null, null);
+                "amqp://guest:guest@127.0.0.1:5672/coord", null, null, null, null);
         assertEquals("amqp://guest:guest@127.0.0.1:5672/coord", noEnv.effectiveUri(Map.of()),
                 "the literal uri is used when no uriEnv is configured");
         assertEquals(LeadMailbox.DEFAULT_PREFETCH, noEnv.prefetchOrDefault());
     }
 
+    /**
+     * fleetd #361: the live block ships as just {@code uriEnv} + {@code selfId} (see
+     * {@code Fleetd.example.yaml} / the operator's real {@code fleetd.yaml}, gitignored). That exact
+     * shape, with no {@code peers:} key at all, must keep parsing unchanged after this field is added.
+     */
+    @Test
+    void coordinatorBlockWithNoPeersKeyStillParses(@TempDir Path dir) throws Exception {
+        Path f = dir.resolve("coordinator-no-peers.yaml");
+        Files.writeString(f, """
+                bind:
+                  port: 8080
+                coordinator:
+                  uriEnv: COORD_AMQP_URI
+                  selfId: mac
+                """);
+
+        FleetConfig cfg = FleetConfig.load(f);
+        assertNotNull(cfg.coordinator());
+        assertEquals("mac", cfg.coordinator().selfId());
+        assertEquals(List.of(), cfg.coordinator().peers(), "no peers: key means no configured peers, never null");
+    }
+
+    @Test
+    void coordinatorPeersParsesAndDropsBlankEntries(@TempDir Path dir) throws Exception {
+        Path f = dir.resolve("coordinator-peers.yaml");
+        Files.writeString(f, """
+                bind:
+                  port: 8080
+                coordinator:
+                  selfId: mac
+                  uri: amqp://guest:guest@127.0.0.1:5672/coord
+                  peers:
+                    - fleet01
+                    - ""
+                    - fleet02
+                """);
+
+        FleetConfig cfg = FleetConfig.load(f);
+        assertEquals(List.of("fleet01", "fleet02"), cfg.coordinator().peers(),
+                "a blank peer entry must be dropped, never kept as an empty coord-id");
+    }
+
+    @Test
+    void coordinatorPeersDefaultsToEmptyWhenConstructedWithNull() {
+        FleetConfig.Coordinator c = new FleetConfig.Coordinator(
+                "amqp://guest:guest@127.0.0.1:5672/coord", null, "mac", null, null);
+        assertEquals(List.of(), c.peers(), "a null peers list must default to empty, never NPE downstream");
+    }
+
     @Test
     void absentWorktreeGroupLeavesItNull(@TempDir Path dir) throws Exception {
         Path f = dir.resolve("no-worktree-group.yaml");
@@ -2580,4 +2629,58 @@ class FleetConfigTest {
                 "with no pool to choose from, every configured profile is a candidate and the "
                         + "first one wins");
     }
+
+    // ── idle-sleep guard: default-on config block ───────────────────────────────────────────────
+
+    @Test
+    void idleSleepGuardIsOnByDefaultWhenTheBlockIsEntirelyAbsent(@TempDir Path dir) throws Exception {
+        Path f = dir.resolve("fleetd.yaml");
+        Files.writeString(f, """
+                bind:
+                  host: 127.0.0.1
+                  port: 8080
+                """);
+
+        FleetConfig cfg = FleetConfig.load(f);
+        assertNull(cfg.idleSleepGuard(), "an absent block parses to null, unlike most other blocks here");
+        // The block itself is absent, but the FEATURE stays on: Fleetd treats a null block the
+        // same as enabled: true (see FleetConfig.idleSleepGuard's javadoc) — this test only pins
+        // the parse result, the on-by-default behaviour is Fleetd's own null check.
+    }
+
+    @Test
+    void idleSleepGuardExplicitlyEnabledIsOn(@TempDir Path dir) throws Exception {
+        Path f = dir.resolve("fleetd.yaml");
+        Files.writeString(f, """
+                idleSleepGuard:
+                  enabled: true
+                """);
+
+        FleetConfig cfg = FleetConfig.load(f);
+        assertTrue(cfg.idleSleepGuard().isEnabled());
+    }
+
+    @Test
+    void idleSleepGuardExplicitlyDisabledIsOff(@TempDir Path dir) throws Exception {
+        Path f = dir.resolve("fleetd.yaml");
+        Files.writeString(f, """
+                idleSleepGuard:
+                  enabled: false
+                """);
+
+        FleetConfig cfg = FleetConfig.load(f);
+        assertFalse(cfg.idleSleepGuard().isEnabled());
+    }
+
+    @Test
+    void idleSleepGuardBlockPresentButEmptyDefaultsToEnabled(@TempDir Path dir) throws Exception {
+        Path f = dir.resolve("fleetd.yaml");
+        Files.writeString(f, """
+                idleSleepGuard: {}
+                """);
+
+        FleetConfig cfg = FleetConfig.load(f);
+        assertTrue(cfg.idleSleepGuard().isEnabled(),
+                "unlike ConfigReload/Health, this block defaults to ON even when present but empty");
+    }
 }

fleetd/src/test/java/dev/ltms/fleet/config/FleetConfigWithDefaultsPreservesEveryComponentTest.java

@@ -45,8 +45,8 @@ import static org.junit.jupiter.api.Assertions.assertEquals;
  * <p>Why this is a valid check for every component, not just some: {@link #withDefaults()}'s own
  * comments document that it only ever REPLACES a component when the incoming value is {@code null}
  * (or blank, for {@code placement}) — {@code broker}/{@code primary}/{@code leadHeartbeat}/
- * {@code configReload}/{@code coordinator}/{@code worktreeGroup}/{@code memberLoginShell} are left
- * as-is unconditionally, and {@code bind}/{@code guard}/{@code lifecycle}/{@code auth}/
+ * {@code configReload}/{@code coordinator}/{@code worktreeGroup}/{@code memberLoginShell}/
+ * {@code memberSkills}/{@code idleSleepGuard} are left as-is unconditionally, and {@code bind}/{@code guard}/{@code lifecycle}/{@code auth}/
  * {@code fleet}/{@code quarantineCooldownSeconds}/{@code memberCredentials}/{@code placement} are
  * replaced only on null/blank input. A value that is never null or blank going in must therefore
  * never change coming out, for every current component. No exclusion is needed today.
@@ -92,9 +92,11 @@ class FleetConfigWithDefaultsPreservesEveryComponentTest {
         v.put("memberCredentials", new FleetConfig.MemberCredentials(
                 FleetConfig.MemberCredentials.POLICY_DENY_BY_DEFAULT,
                 List.of("git"), List.of("git", "ssh"), null));
-        v.put("coordinator", new FleetConfig.Coordinator("amqp://coord-guard", null, "self-guard", 3));
+        v.put("coordinator", new FleetConfig.Coordinator("amqp://coord-guard", null, "self-guard", 3, null));
         v.put("worktreeGroup", "group-guard");
         v.put("memberLoginShell", "/bin/zsh");
+        v.put("memberSkills", "/skills/guard");
+        v.put("idleSleepGuard", new FleetConfig.IdleSleepGuard(true));
         assertNamesMatchComponents(v);
         return v;
     }

fleetd/src/test/java/dev/ltms/fleet/deploy/SystemdUnitSafetyTest.java

@@ -0,0 +1,232 @@
+package dev.ltms.fleet.deploy;
+
+import java.nio.file.Files;
+import java.nio.file.Path;
+import java.util.ArrayList;
+import java.util.List;
+import java.util.regex.Pattern;
+import java.util.stream.Stream;
+
+import org.junit.jupiter.api.DisplayName;
+import org.junit.jupiter.api.Test;
+import org.junit.jupiter.params.ParameterizedTest;
+import org.junit.jupiter.params.provider.MethodSource;
+
+import static org.junit.jupiter.api.Assertions.assertFalse;
+import static org.junit.jupiter.api.Assertions.assertTrue;
+
+/**
+ * fleetd #360: {@code deploy/fleetd.service} started clean on fleet01 and broke the daemon in
+ * three ways that nothing logs at startup.
+ *
+ * <ul>
+ *   <li>{@code ProtectSystem=}, {@code ProtectHome=}, {@code ProtectKernelTunables=} and
+ *       {@code ProtectControlGroups=} each give the unit its own mount namespace. fleetd resolves
+ *       a caller's role by running {@code lsof} to find the loopback peer PID (see
+ *       {@code mcp/LsofPeerPidLookup}). Inside such a namespace {@code lsof} returns nothing,
+ *       every caller falls back to ANONYMOUS, and the primary is refused every orchestration call
+ *       with "unauthenticated: anonymous may not SPAWN" -- while healthz still reports ok.
+ *       Measured by bisection on fleet01 2026-09-05 (lsof line count): no sandbox 3,
+ *       {@code ProtectSystem=strict} 0, {@code ProtectHome=read-only} 0,
+ *       {@code ProtectKernelTunables} 0, {@code ProtectControlGroups} 0,
+ *       {@code RestrictSUIDSGID} 3, {@code NoNewPrivileges} 3 -- so only the first four are
+ *       forbidden.
+ *   <li>{@code PrivateTmp=true} gives the unit its own {@code /tmp}. fleetd writes the member
+ *       ZDOTDIR credential-scrub directory and the opencode config directory under
+ *       {@code java.io.tmpdir}, and the member pane -- a child of a *different* unit
+ *       (herdr.service) -- has to read them back. A private {@code /tmp} on either unit turns the
+ *       credential scrub into a silent no-op.
+ *   <li>Running {@code java} directly from {@code ExecStart} skips the login shell. Every secret
+ *       fleetd needs (AI_GATEWAY_TOKEN, WORKER_GITEA_TOKEN, LAVINMQ_URI, COORD_AMQP_URI) lives in
+ *       a file only the login shell sources; systemd runs no login shell on its own. Started that
+ *       way the daemon boots fine with empty credentials, and the failure appears hours later as a
+ *       member that cannot open a pull request.
+ * </ul>
+ *
+ * <p>Review round 2 on fleetd #360 found the same shape one file further down the chain:
+ * {@code herdr.service}'s {@code ExecStart} only names {@code deploy/herdr-inner.sh}, so that
+ * script is the ONLY place two more of these properties live, and nothing was reading it.
+ *
+ * <ul>
+ *   <li>If the script does not exec a login shell, herdr -- and every member pane it spawns as a
+ *       child -- starts with none of the secrets only a login shell sources, the same silent
+ *       empty-credentials failure as fleetd.service's {@code ExecStart}, one process further away.
+ *   <li>If the script does not set a real, non-zero pty size before starting herdr (with
+ *       {@code stty}), herdr reports a 0x0 window and every pane spawn fails with
+ *       "ghostty error -2" -- which surfaces as a fleetd spawn failure, not a herdr one.
+ * </ul>
+ *
+ * <p>None of these five failures makes the unit (or the script) fail to start, or makes
+ * {@code /healthz} report unhealthy, so nothing short of reading the files catches a regression.
+ * This test is that read.
+ *
+ * <p><b>It checks source text, not behaviour</b> -- it cannot start systemd or fork an mount
+ * namespace in a build sandbox. It parses the same two files an operator would install and fails
+ * if a forbidden directive is active, exactly the way {@code McpContractDocTest} guards
+ * {@code docs/MCP-Contract.md} against naming a tool that does not exist.
+ */
+class SystemdUnitSafetyTest {
+
+    /** Tests run with the module directory (fleetd/) as cwd; deploy/ is the repo-root sibling. */
+    private static final Path FLEETD_SERVICE = Path.of("../deploy/fleetd.service");
+    private static final Path HERDR_SERVICE = Path.of("../deploy/herdr.service");
+    private static final Path HERDR_INNER_SCRIPT = Path.of("../deploy/herdr-inner.sh");
+
+    private static final List<String> NAMESPACING_DIRECTIVES = List.of(
+            "ProtectSystem", "ProtectHome", "ProtectKernelTunables", "ProtectControlGroups");
+
+    /**
+     * A shell invoked with a login flag, e.g. {@code zsh -lc '...'} or {@code /bin/sh -l}. The
+     * property under test is the {@code -l}, not the specific shell or the rest of its flags, so
+     * this matches a token ending in "sh" followed by a flag cluster containing "l" -- tighter
+     * than a bare {@code contains("-lc")}, which a "-lc" anywhere in the line would also satisfy.
+     */
+    private static final Pattern LOGIN_SHELL_INVOCATION =
+            Pattern.compile("(?:^|\\s)\\S*sh\\s+-[A-Za-z]*l[A-Za-z]*\\b");
+
+    private static final Pattern POSITIVE_ROWS = Pattern.compile("\\brows\\s+([1-9]\\d*)\\b");
+    private static final Pattern POSITIVE_COLS = Pattern.compile("\\bcols\\s+([1-9]\\d*)\\b");
+
+    static Stream<Path> bothUnits() {
+        return Stream.of(FLEETD_SERVICE, HERDR_SERVICE);
+    }
+
+    private static boolean invokesALoginShell(List<String> activeLines) {
+        return activeLines.stream().anyMatch(l -> LOGIN_SHELL_INVOCATION.matcher(l).find());
+    }
+
+    /** An active {@code stty} line naming both a positive row count and a positive column count. */
+    private static boolean setsANonZeroPtySize(List<String> activeLines) {
+        return activeLines.stream()
+                .filter(l -> l.startsWith("stty"))
+                .anyMatch(l -> POSITIVE_ROWS.matcher(l).find() && POSITIVE_COLS.matcher(l).find());
+    }
+
+    /** Lines that are actually in force: comments and blank lines don't count. */
+    private static List<String> activeLines(Path unit) throws Exception {
+        List<String> active = new ArrayList<>();
+        for (String line : Files.readAllLines(unit)) {
+            String stripped = line.strip();
+            if (!stripped.isEmpty() && !stripped.startsWith("#")) {
+                active.add(stripped);
+            }
+        }
+        return active;
+    }
+
+    @ParameterizedTest
+    @MethodSource("bothUnits")
+    @DisplayName("[SOURCE TEXT] no active mount-namespacing directive -- it blinds lsof and turns every caller ANONYMOUS")
+    void doesNotActivateAMountNamespace(Path unit) throws Exception {
+        List<String> active = activeLines(unit);
+
+        for (String directive : NAMESPACING_DIRECTIVES) {
+            Pattern activeDirective = Pattern.compile("^" + Pattern.quote(directive) + "\\s*=");
+            List<String> hits = active.stream().filter(l -> activeDirective.matcher(l).find()).toList();
+            assertTrue(hits.isEmpty(),
+                    unit + " sets " + directive + " (" + hits + "). That directive gives the unit its "
+                            + "own mount namespace; inside it, fleetd's lsof-based caller lookup "
+                            + "(mcp/LsofPeerPidLookup) returns nothing, so every MCP caller falls back to "
+                            + "ANONYMOUS and the primary is refused every orchestration call with "
+                            + "\"unauthenticated: anonymous may not SPAWN\" -- while the daemon still "
+                            + "starts and /healthz still reports ok. Measured on fleet01 2026-09-05 "
+                            + "(fleetd #360). A commented-out mention in the file's own DO-NOT-add block "
+                            + "is fine; an active directive is not.");
+        }
+    }
+
+    @ParameterizedTest
+    @MethodSource("bothUnits")
+    @DisplayName("[SOURCE TEXT] PrivateTmp is not true -- it silently no-ops the credential scrub")
+    void privateTmpIsNotTrue(Path unit) throws Exception {
+        List<String> active = activeLines(unit);
+        Pattern privateTmpTrue = Pattern.compile("^PrivateTmp\\s*=\\s*true\\b");
+
+        boolean hasPrivateTmpTrue = active.stream().anyMatch(l -> privateTmpTrue.matcher(l).find());
+        assertFalse(hasPrivateTmpTrue,
+                unit + " sets PrivateTmp=true. fleetd writes the member ZDOTDIR credential-scrub "
+                        + "directory and the opencode config directory under java.io.tmpdir, and the "
+                        + "member pane -- a child of a DIFFERENT unit -- has to read them back. A "
+                        + "private /tmp on either unit turns the credential scrub into a silent no-op: "
+                        + "no error, no log line, the scrub just never happens (fleetd #360).");
+    }
+
+    @Test
+    @DisplayName("[SOURCE TEXT] fleetd.service's ExecStart goes through a login shell -- otherwise every secret is empty")
+    void execStartUsesALoginShell() throws Exception {
+        List<String> active = activeLines(FLEETD_SERVICE);
+        List<String> execStartLines = active.stream().filter(l -> l.startsWith("ExecStart=")).toList();
+
+        assertTrue(execStartLines.size() == 1,
+                FLEETD_SERVICE + " must have exactly one active ExecStart= line; found "
+                        + execStartLines.size() + ": " + execStartLines);
+
+        String execStart = execStartLines.get(0);
+        assertTrue(LOGIN_SHELL_INVOCATION.matcher(execStart).find(),
+                FLEETD_SERVICE + "'s ExecStart (" + execStart + ") does not run a login shell (a shell "
+                        + "invoked with a \"-l\" flag, e.g. \"zsh -lc\"). Every secret fleetd needs "
+                        + "(AI_GATEWAY_TOKEN, WORKER_GITEA_TOKEN, LAVINMQ_URI, COORD_AMQP_URI) lives in a "
+                        + "file only the login shell sources; systemd runs no login shell on its own. "
+                        + "Running java directly boots fine with every credential empty, and the failure "
+                        + "surfaces hours later as a member that cannot open a pull request (fleetd #360).");
+    }
+
+    @Test
+    @DisplayName("[SOURCE TEXT] herdr-inner.sh execs a login shell -- otherwise herdr and every member it spawns start with empty credentials")
+    void herdrInnerScriptUsesALoginShell() throws Exception {
+        List<String> active = activeLines(HERDR_INNER_SCRIPT);
+
+        assertTrue(invokesALoginShell(active),
+                HERDR_INNER_SCRIPT + " does not exec a login shell (a shell invoked with a \"-l\" flag, "
+                        + "e.g. \"zsh -lc\"). herdr.service's ExecStart only names this script, so this "
+                        + "is the ONLY place herdr's login-shell property lives. Without it, herdr -- and "
+                        + "every member pane it spawns as a child of herdr -- starts with none of the "
+                        + "secrets that only a login shell sources (this host: ~/.fleet/secrets.sh via "
+                        + "~/.zprofile), and the failure surfaces hours later as a member with no "
+                        + "credentials at all, not just fleetd (fleetd #360).");
+    }
+
+    @Test
+    @DisplayName("[SOURCE TEXT] herdr-inner.sh sets a non-zero pty size before starting herdr -- otherwise every pane spawn fails with \"ghostty error -2\"")
+    void herdrInnerScriptSetsANonZeroPtySize() throws Exception {
+        List<String> active = activeLines(HERDR_INNER_SCRIPT);
+
+        assertTrue(setsANonZeroPtySize(active),
+                HERDR_INNER_SCRIPT + " does not run \"stty rows N cols M\" with both N and M positive "
+                        + "before starting herdr. Without a real pty size, herdr reports a 0x0 window and "
+                        + "every pane spawn fails with \"ghostty error -2\" -- which surfaces as a fleetd "
+                        + "spawn failure, not a herdr one, and gives no hint that the actual cause is this "
+                        + "script (fleetd #360).");
+    }
+
+    /**
+     * The denominator guard, same shape as {@code McpContractDocTest}'s: a check that scans for a
+     * forbidden pattern passes trivially if it is handed nothing to scan. Pin that all three files
+     * exist, are non-trivial, and that the DO-NOT block's commented mentions are still there -- so
+     * the "comment survives, directive doesn't" distinction above is actually being exercised.
+     */
+    @Test
+    @DisplayName("[SOURCE TEXT] the namespacing check is not vacuous -- all three files exist and the DO-NOT block still mentions every forbidden directive in a comment")
+    void theCheckActuallyHasSomethingToCheck() throws Exception {
+        assertTrue(Files.size(FLEETD_SERVICE) > 200,
+                FLEETD_SERVICE + " is missing or unexpectedly small -- the checks above would pass "
+                        + "vacuously against an empty or absent file");
+        assertTrue(Files.size(HERDR_SERVICE) > 200,
+                HERDR_SERVICE + " is missing or unexpectedly small -- the checks above would pass "
+                        + "vacuously against an empty or absent file");
+        assertTrue(Files.size(HERDR_INNER_SCRIPT) > 50,
+                HERDR_INNER_SCRIPT + " is missing or unexpectedly small -- the login-shell and "
+                        + "pty-size checks above would either pass vacuously or fail with an opaque "
+                        + "\"file not found\" instead of naming the actual consequence (empty "
+                        + "credentials / \"ghostty error -2\") against an empty or absent file");
+
+        String fleetdService = Files.readString(FLEETD_SERVICE);
+        for (String directive : NAMESPACING_DIRECTIVES) {
+            assertTrue(fleetdService.contains(directive),
+                    FLEETD_SERVICE + " no longer mentions " + directive + " anywhere, not even in the "
+                            + "DO-NOT-add comment block that explains why it must stay out. That comment "
+                            + "is the whole point of fleetd #360 -- it is what stops the next edit from "
+                            + "re-adding the directive without knowing why.");
+        }
+    }
+}

fleetd/src/test/java/dev/ltms/fleet/health/FleetHealthMonitorTest.java

@@ -30,6 +30,7 @@ import java.util.concurrent.ScheduledFuture;
 import java.util.concurrent.ScheduledThreadPoolExecutor;
 import java.util.concurrent.TimeUnit;
 import java.util.concurrent.atomic.AtomicLong;
+import java.util.concurrent.atomic.AtomicReference;
 import java.util.function.BiConsumer;
 import java.util.function.LongSupplier;
 
@@ -206,6 +207,139 @@ class FleetHealthMonitorTest {
                 .workingSuspectAfterOrDefault());
     }
 
+    // --- fleetd #386: a stall detector whose only clock freezes with a sleeping host is worse
+    // than a silent one — it reports "quiet" for a member that was genuinely busy for hours.
+
+    @Test void monotonicClockFrozenPastThresholdOnRealClockStillReportsStallSuspected() {
+        Logger logger = (Logger) LoggerFactory.getLogger(FleetHealthMonitor.class);
+        ListAppender<ILoggingEvent> appender = new ListAppender<>();
+        appender.start();
+        logger.addAppender(appender);
+        try {
+            AtomicLong mono = new AtomicLong(0);
+            AtomicLong real = new AtomicLong(0);
+            FakeHerdr herdr = new FakeHerdr().withAgent("busy", "term_busy", "pane_busy", "tab_busy");
+            var scheduler = Executors.newSingleThreadScheduledExecutor();
+            FleetHealthMonitor monitor = monitorWithClocks(herdr,
+                    List.of(member("term_busy", MemberSession.State.BUSY, 0, 0)), scheduler,
+                    mono::get, real::get, 60, 600, (_, _) -> { });
+
+            monitor.tick(); // establishes the clock baseline; nothing has diverged yet
+            assertEquals(0, appender.list.stream().filter(event -> event.getFormattedMessage()
+                    .contains("state=STALL_SUSPECTED")).count());
+
+            // The host "sleeps": the monotonic clock stands completely still while the real clock
+            // keeps moving, past the 600s stall threshold.
+            real.set(TimeUnit.SECONDS.toNanos(700));
+            monitor.tick();
+            monitor.stop();
+
+            assertTrue(appender.list.stream().anyMatch(event -> event.getFormattedMessage()
+                            .contains("member=term_busy state=STALL_SUSPECTED")),
+                    "the real clock crossed the stall threshold even though the monotonic clock never moved");
+        } finally {
+            logger.detachAppender(appender);
+        }
+    }
+
+    @Test void clockDivergenceIsLoggedOnceNotOncePerTick() {
+        Logger logger = (Logger) LoggerFactory.getLogger(FleetHealthMonitor.class);
+        ListAppender<ILoggingEvent> appender = new ListAppender<>();
+        appender.start();
+        logger.addAppender(appender);
+        try {
+            AtomicLong mono = new AtomicLong(0);
+            AtomicLong real = new AtomicLong(0);
+            var scheduler = Executors.newSingleThreadScheduledExecutor();
+            FleetHealthMonitor monitor = monitorWithClocks(new FakeHerdr(), List.of(), scheduler,
+                    mono::get, real::get, 60, 600, (_, _) -> { });
+
+            monitor.tick(); // baseline: no divergence possible yet
+
+            // One sleep gap: the monotonic clock is frozen while the real clock jumps far past one
+            // tick interval (60s).
+            real.set(TimeUnit.SECONDS.toNanos(700));
+            monitor.tick();
+
+            // The host is awake again: both clocks advance together from here, so no more divergence.
+            mono.set(TimeUnit.SECONDS.toNanos(10));
+            real.set(TimeUnit.SECONDS.toNanos(710));
+            monitor.tick();
+            mono.set(TimeUnit.SECONDS.toNanos(20));
+            real.set(TimeUnit.SECONDS.toNanos(720));
+            monitor.tick();
+            monitor.stop();
+
+            assertEquals(1, appender.list.stream().filter(event -> event.getFormattedMessage()
+                            .contains("the monotonic clock did not advance"))
+                    .count(), "one sleep gap must produce exactly one divergence line, not one per tick");
+        } finally {
+            logger.detachAppender(appender);
+        }
+    }
+
+    /**
+     * fleetd #386 follow-up, added on merge. The fix carries a PER-MEMBER drift baseline, so drift
+     * from a sleep that happened BEFORE a member went busy is never charged to that member. The
+     * two tests shipped with the fix both start with the member already BUSY, so a single global
+     * baseline passes them — this one fails without the per-member map.
+     *
+     * <p>Order matters: the host sleeps while nothing is busy, and only then does a member take a
+     * turn. Its stall clock must start at zero.
+     */
+    @Test void driftFromASleepBeforeAMemberWentBusyIsNotChargedToThatMember() {
+        Logger logger = (Logger) LoggerFactory.getLogger(FleetHealthMonitor.class);
+        ListAppender<ILoggingEvent> appender = new ListAppender<>();
+        appender.start();
+        logger.addAppender(appender);
+        try {
+            AtomicLong mono = new AtomicLong(0);
+            AtomicLong real = new AtomicLong(0);
+            AtomicReference<List<MemberSession>> roster = new AtomicReference<>(List.of());
+            FakeHerdr herdr = new FakeHerdr().withAgent("busy", "term_busy", "pane_busy", "tab_busy");
+            var scheduler = Executors.newSingleThreadScheduledExecutor();
+            AgentControl agents = new AgentControl(herdr);
+            FleetHealthMonitor monitor = new FleetHealthMonitor(agents, roster::get,
+                    new MessageService(agents, new Injector(agents), new Rendezvous(), new InMemoryReplyInbox()),
+                    scheduler, mono::get, real::get, 60, 600, (_, _) -> { });
+
+            monitor.tick();                                   // baseline, no members yet
+
+            // The host sleeps for 700s with nobody busy: the monotonic clock stands still.
+            real.set(TimeUnit.SECONDS.toNanos(700));
+            monitor.tick();
+
+            // Awake again. Only NOW does a member start a turn, with a fresh activity stamp taken
+            // from the monotonic clock. Both clocks advance together from here.
+            mono.set(TimeUnit.SECONDS.toNanos(10));
+            real.set(TimeUnit.SECONDS.toNanos(710));
+            roster.set(List.of(member("term_busy", MemberSession.State.BUSY,
+                    0, TimeUnit.SECONDS.toNanos(10))));
+            monitor.tick();
+
+            mono.set(TimeUnit.SECONDS.toNanos(20));
+            real.set(TimeUnit.SECONDS.toNanos(720));
+            monitor.tick();
+            monitor.stop();
+
+            assertEquals(0, appender.list.stream().filter(event -> event.getFormattedMessage()
+                            .contains("member=term_busy state=STALL_SUSPECTED")).count(),
+                    "the member has been busy for 10s, not 710s — the earlier sleep is not its stall");
+        } finally {
+            logger.detachAppender(appender);
+        }
+    }
+
+    private static FleetHealthMonitor monitorWithClocks(FakeHerdr herdr, List<MemberSession> roster,
+            java.util.concurrent.ScheduledExecutorService scheduler, LongSupplier clock,
+            LongSupplier realtimeClock, long intervalSeconds, long workingSuspectAfterSeconds,
+            BiConsumer<String, String> failTarget) {
+        AgentControl agents = new AgentControl(herdr);
+        return new FleetHealthMonitor(agents, () -> roster,
+                new MessageService(agents, new Injector(agents), new Rendezvous(), new InMemoryReplyInbox()),
+                scheduler, clock, realtimeClock, intervalSeconds, workingSuspectAfterSeconds, failTarget);
+    }
+
     @Test void goneMemberRecoveryLogsOnceWithoutRefiringTargetFailure() {
         Logger logger = (Logger) LoggerFactory.getLogger(FleetHealthMonitor.class);
         Level previousLevel = logger.getLevel();

fleetd/src/test/java/dev/ltms/fleet/herdr/LeadTabScannerTest.java

@@ -6,6 +6,7 @@ import org.junit.jupiter.api.Test;
 
 import java.util.ArrayList;
 import java.util.LinkedHashMap;
+import java.util.LinkedHashSet;
 import java.util.List;
 import java.util.Map;
 import java.util.Set;
@@ -35,6 +36,12 @@ class LeadTabScannerTest {
         final Map<String, String[]> tabs = new LinkedHashMap<>();
         /** pane_id → [tab_id, terminal_id]. */
         final Map<String, String[]> panes = new LinkedHashMap<>();
+        /**
+         * tab_id → whether herdr reports a running agent there. Defaults to {@code true} for every
+         * tab that has a pane, so every existing fixture keeps meaning "a live lead" unless a test
+         * says otherwise via {@link #deadAgent}.
+         */
+        final Set<String> deadTabs = new LinkedHashSet<>();
         int calls;
         boolean failing;
 
@@ -53,6 +60,18 @@ class LeadTabScannerTest {
             return this;
         }
 
+        /** Mark {@code tabId} as labelled but agent-less — a dead lead's leftover tab (fleetd #359). */
+        TopologyHerdr deadAgent(String tabId) {
+            deadTabs.add(tabId);
+            return this;
+        }
+
+        /** Undo {@link #deadAgent} — models {@code agent.list} reporting the tab live again. */
+        TopologyHerdr reviveAgent(String tabId) {
+            deadTabs.remove(tabId);
+            return this;
+        }
+
         @Override
         public JsonNode call(String method, Object params) {
             calls++;
@@ -83,6 +102,19 @@ class LeadTabScannerTest {
                                     .formatted(id, p[0], p[1])));
                     return read("{\"panes\":[%s]}".formatted(String.join(",", items)));
                 }
+                case "agent.list" -> {
+                    // One agent per distinct tab that has a pane and isn't marked dead — mirrors
+                    // AgentControl.list()'s "agents" shape closely enough for the scanner's join,
+                    // which only reads tab_id off each entry.
+                    Set<String> seen = new LinkedHashSet<>();
+                    panes.forEach((paneId, p) -> {
+                        String tabId = p[0];
+                        if (!deadTabs.contains(tabId) && seen.add(tabId)) {
+                            items.add("{\"tab_id\":\"%s\"}".formatted(tabId));
+                        }
+                    });
+                    return read("{\"agents\":[%s]}".formatted(String.join(",", items)));
+                }
                 default -> throw new AssertionError("unexpected herdr call: " + method);
             }
         }
@@ -208,6 +240,114 @@ class LeadTabScannerTest {
                 scanner(herdr, twoLeadsConfigured(), new AtomicLong()).get().get("term_opus_split"));
     }
 
+    // ── fleetd #359: a labelled tab is only a lead when something is running in it ─────────────────
+
+    /**
+     * The core invariant this ticket restores: {@code get()} must never report a terminal for a
+     * lead whose pane no longer runs an agent. Before this fix the scanner joined labelled tabs to
+     * panes with no liveness check at all, so a tab left behind by a crashed/relaunched lead (see
+     * {@code LeadLauncher}'s own staleness handling) was reported as live forever — which is exactly
+     * what let duplicate lead tabs make {@code LeadCoordLoop.resolveLocalLead()} permanently unable
+     * to pick one. Mutate this away (drop the {@code agent.list} cross-check in {@link
+     * LeadTabScanner#scan()}) and this test must fail.
+     */
+    @Test
+    void aLabelledTabWithNoRunningAgentIsNotReported() {
+        TopologyHerdr herdr = twoLeads().deadAgent("w1:t1"); // opus-5.0's tab is labelled but dead
+
+        Map<String, String> leads = scanner(herdr, twoLeadsConfigured(), new AtomicLong()).get();
+
+        assertFalse(leads.containsKey("term_opus"),
+                "a labelled tab with no running agent must never be reported as a live lead");
+        assertEquals("gpt-sol-5.6", leads.get("term_gpt"),
+                "the other, genuinely live lead must be unaffected");
+    }
+
+    /**
+     * The other direction, pinned separately so a fix cannot satisfy the test above by simply
+     * returning nothing: a labelled tab that DOES have a running agent must still be reported. A
+     * scanner that always comes back empty is worse than the bug it fixes.
+     */
+    @Test
+    void aLabelledTabWithARunningAgentIsStillReported() {
+        Map<String, String> leads = scanner(twoLeads(), twoLeadsConfigured(), new AtomicLong()).get();
+
+        assertEquals("opus-5.0", leads.get("term_opus"));
+        assertEquals("gpt-sol-5.6", leads.get("term_gpt"));
+    }
+
+    /**
+     * fleetd #359 review, finding 2 — the exact scenario the ticket's own evidence showed:
+     * {@code agent.list} can come back successfully but short, without the herdr call ever throwing.
+     * A lead this class already reported as live must not be dropped on the strength of one such
+     * read: {@link LeadTabScanner#get()}'s "keep the cache on failure" contract only fires on an
+     * exception, so without a fix a single short {@code agent.list} silently empties the cached map —
+     * which would resolve that lead's pane as {@code Role.WORKER} downstream, refusing every
+     * orchestration call. Mutate this away (drop the one-scan grace in {@link
+     * LeadTabScanner#scan()}) and this test must fail.
+     */
+    @Test
+    void aTransientAgentListMissDoesNotDemoteALeadAlreadyKnownLive() {
+        TopologyHerdr herdr = twoLeads();
+        AtomicLong clock = new AtomicLong();
+        LeadTabScanner s = scanner(herdr, twoLeadsConfigured(), clock);
+        assertTrue(s.get().containsKey("term_opus"), "opus must be known live before the miss");
+
+        // One scan where agent.list comes back without opus's tab, even though the tab and pane are
+        // completely unchanged — the tab/pane are still there, only the liveness read is short.
+        herdr.deadAgent("w1:t1");
+        clock.addAndGet(TTL);
+
+        assertTrue(s.get().containsKey("term_opus"),
+                "a single missed detection must not empty the cached map for a lead already known live");
+        assertEquals("gpt-sol-5.6", s.get().get("term_gpt"), "the unaffected lead is unchanged");
+    }
+
+    /**
+     * The other half of finding 2, so the grace above cannot be mistaken for permanent amnesty: the
+     * original #359 invariant (a genuinely dead tab is not reported forever) must still hold once a
+     * SECOND, independent scan agrees the agent is gone.
+     */
+    @Test
+    void aLeadMissingFromAgentListOnTwoConsecutiveScansIsFinallyDropped() {
+        TopologyHerdr herdr = twoLeads();
+        AtomicLong clock = new AtomicLong();
+        LeadTabScanner s = scanner(herdr, twoLeadsConfigured(), clock);
+        assertTrue(s.get().containsKey("term_opus"));
+
+        herdr.deadAgent("w1:t1");
+        clock.addAndGet(TTL);
+        assertTrue(s.get().containsKey("term_opus"), "first miss is a grace period, not a verdict");
+
+        clock.addAndGet(TTL); // a second, independent scan — still no agent
+        assertFalse(s.get().containsKey("term_opus"),
+                "a second consecutive miss for the same terminal must finally drop it");
+    }
+
+    /** A lead that recovers between the two misses keeps its grace spent, not renewed for free. */
+    @Test
+    void aLeadThatRecoversBetweenMissesIsReportedNormallyAndResetsItsGrace() {
+        TopologyHerdr herdr = twoLeads();
+        AtomicLong clock = new AtomicLong();
+        LeadTabScanner s = scanner(herdr, twoLeadsConfigured(), clock);
+        assertTrue(s.get().containsKey("term_opus"));
+
+        herdr.deadAgent("w1:t1");
+        clock.addAndGet(TTL);
+        assertTrue(s.get().containsKey("term_opus"), "graced on the first miss");
+
+        herdr.reviveAgent("w1:t1"); // the miss really was transient
+        clock.addAndGet(TTL);
+        assertTrue(s.get().containsKey("term_opus"), "found live again — reported normally");
+
+        // A later, unrelated miss must get its own fresh grace scan rather than being dropped
+        // immediately because the earlier miss had already "used up" a slot for this terminal.
+        herdr.deadAgent("w1:t1");
+        clock.addAndGet(TTL);
+        assertTrue(s.get().containsKey("term_opus"),
+                "a miss after a genuine recovery is a new event and deserves its own grace scan");
+    }
+
     /**
      * CB-579 acceptance (6): this is the bug the ticket closes. A stale pin used to be merged back
      * over every scan and never expire; now a scan is the whole answer, so a lead whose tab is gone

fleetd/src/test/java/dev/ltms/fleet/inject/CompletionResolverTest.java

@@ -357,6 +357,54 @@ class CompletionResolverTest {
                 "the failure carries whatever was on screen: " + waiter.getNow(null).text());
     }
 
+    @Test
+    void aPlausibleLookingReplyInsideTheFloorStillFails() {
+        // fleetd#376 guard. A fix was attempted that inspected the pane inside the floor and resolved
+        // a COMPLETION when the text "looked like a real reply". Every cheap test for that is unsafe:
+        // lastAssistantBlock falls back to the WHOLE pane when there is no ⏺ marker, and a crash pane
+        // almost always contains sentence punctuation — in a file path, a version, or a hostname.
+        // This pane is the trap: it reads like a finished answer and it is a backend failure.
+        FakeHerdr herdr = new FakeHerdr().readText(
+                "Error: connection reset while loading src/main/java/Foo.java v1.2.3\n❯ ");
+        Rendezvous rendezvous = new Rendezvous();
+        long[] clock = {10_000_000_000L};
+        CompletionResolver resolver = new CompletionResolver(new AgentControl(herdr), rendezvous,
+                ExhaustedPatternLookup.none(), ExhaustionSink.none(), () -> clock[0]);
+
+        var waiter = rendezvous.open("term_a");
+        var turn = new CompletionResolver.InFlight(waiter, null, clock[0]);
+        clock[0] += CompletionResolver.MIN_TURN_NANOS - 1; // inside the floor
+
+        resolver.resolve("term_a", turn);
+
+        assertEquals(Rendezvous.Kind.FAILED, waiter.getNow(null).kind(),
+                "inside the floor the verdict is always FAILED — never guess a completion from pane text");
+    }
+
+    @Test
+    void theTooFastFailureDoesNotAssertACauseItCannotKnow() {
+        // fleetd#376: the message used to say "most likely a backend error before any work started".
+        // When no error pattern matches, that cause is a guess, and a reader who believes it stops
+        // looking at the pane. The verdict stays FAILED; only the claim about WHY is withdrawn.
+        FakeHerdr herdr = new FakeHerdr().readText("I am running on opencode/mimo-v2.5-free.\n❯ ");
+        Rendezvous rendezvous = new Rendezvous();
+        long[] clock = {10_000_000_000L};
+        CompletionResolver resolver = new CompletionResolver(new AgentControl(herdr), rendezvous,
+                ExhaustedPatternLookup.none(), ExhaustionSink.none(), () -> clock[0]);
+
+        var waiter = rendezvous.open("term_a");
+        var turn = new CompletionResolver.InFlight(waiter, null, clock[0]);
+        clock[0] += CompletionResolver.MIN_TURN_NANOS - 1; // inside the floor
+
+        resolver.resolve("term_a", turn);
+
+        String text = waiter.getNow(null).text();
+        assertEquals(Rendezvous.Kind.FAILED, waiter.getNow(null).kind(), "still fails, still loud");
+        assertFalse(text.contains("most likely a backend error"),
+                "an unmatched fast turn must not assert a backend error: " + text);
+        assertTrue(text.contains("mimo-v2.5-free"), "the pane is still carried: " + text);
+    }
+
     @Test
     void aBusyToDoneTransitionJustOutsideTheFloorResolvesNormally() {
         FakeHerdr herdr = new FakeHerdr().readText("⏺ a real, if quick, answer\n❯ ");
@@ -1117,8 +1165,16 @@ class CompletionResolverTest {
         assertTrue(waiter.isDone());
         assertEquals(Rendezvous.Kind.FAILED, waiter.getNow(null).kind(),
                 "still a failure — the floor itself, not the pattern, is why");
-        assertTrue(waiter.getNow(null).text().contains("too fast to be real work"),
-                "a non-match inside the floor stays the generic too-fast reason: " + waiter.getNow(null).text());
+        // fleetd#376: this used to assert the phrase "too fast to be real work", which carried the
+        // claim "most likely a backend error before any work started". With no pattern matched that
+        // cause is a guess, so the wording was withdrawn. What this test really guards is unchanged:
+        // the floor alone still fails the turn, it stays generic, and it never notifies the sink.
+        String reason = waiter.getNow(null).text();
+        assertTrue(reason.contains("inside the floor"),
+                "a non-match inside the floor stays the generic floor reason: " + reason);
+        assertFalse(reason.contains("most likely a backend error"),
+                "a non-match must not assert a cause it did not establish: " + reason);
+        assertTrue(reason.contains("still starting up"), "the pane is still carried: " + reason);
         assertTrue(notified.isEmpty(), "a non-match must never notify the typed sink");
     }
 }

fleetd/src/test/java/dev/ltms/fleet/lead/LeadLauncherTest.java

@@ -9,6 +9,7 @@ import org.junit.jupiter.api.Test;
 import java.util.LinkedHashMap;
 import java.util.List;
 import java.util.Map;
+import java.util.Set;
 
 import static org.junit.jupiter.api.Assertions.*;
 
@@ -106,6 +107,7 @@ class LeadLauncherTest {
 
         assertEquals(0, launcher(herdr, configWith(lead("opus", "lead: opus", 1))).ensureLeads());
         assertFalse(herdr.called("agent.start"), "the live lead must not be duplicated");
+        assertFalse(herdr.called("tab.close"), "a labelled tab WITH a live agent must never be closed");
     }
 
     /**
@@ -122,6 +124,121 @@ class LeadLauncherTest {
                 "a stale label is not a lead; the lead must be relaunched");
     }
 
+    /**
+     * fleetd #359 review finding 1 — the exact scenario the ticket's own live evidence produced: on a
+     * real host, {@code agent.list} reported "0 live" for a tab a plain {@code ps} confirmed was
+     * running a real session. A single such reading must never close the tab outright — that would
+     * destroy the operator's actual lead, a worse failure than the stale-tab bug this ticket exists
+     * to fix. The first dead reading only flags the tab; mutate this away (make the first reading
+     * close instead of flag) and this test must fail.
+     */
+    @Test
+    void aStaleLabelledTabIsFlaggedRatherThanClosedOnTheFirstReconcile() {
+        FakeHerdr herdr = new FakeHerdr()
+                .withWorkspace("wL", "fleet")
+                .withTab("wL", "wL:t1", "lead: opus"); // label only, first look — could be a live session agent.list missed
+
+        assertEquals(1, launcher(herdr, configWith(lead("opus", "lead: opus", 1))).ensureLeads());
+
+        assertFalse(herdr.called("tab.close"),
+                "one missed reading must never close a tab that might be hosting a live session");
+        assertTrue(flaggedTabIds(herdr).contains("wL:t1"),
+                "the stale tab must be flagged pending-close so a later reconcile can confirm it");
+    }
+
+    /**
+     * The operator's own trace on fleet01 (#359): a daemon that restarted several times, each
+     * occasion finding "0 live" for whatever reason, had left several identically-labelled dead
+     * tabs sitting side by side. Every one of them is flagged on its first dead reading, not closed —
+     * none is more or less trustworthy than another.
+     */
+    @Test
+    void allStaleLabelledTabsAreFlaggedRatherThanClosedOnTheFirstReconcile() {
+        FakeHerdr herdr = new FakeHerdr()
+                .withWorkspace("wL", "fleet")
+                .withTab("wL", "wL:t1", "lead: opus")
+                .withTab("wL", "wL:t2", "lead: opus")
+                .withTab("wL", "wL:t3", "lead: opus"); // three restarts' worth of debris, none confirmed twice yet
+
+        assertEquals(1, launcher(herdr, configWith(lead("opus", "lead: opus", 1))).ensureLeads());
+
+        assertFalse(herdr.called("tab.close"), "no tab may be closed on its first dead reading");
+        assertEquals(Set.of("wL:t1", "wL:t2", "wL:t3"), flaggedTabIds(herdr),
+                "every dead labelled tab must be flagged, not just the first one found");
+    }
+
+    /**
+     * fleetd #359 review finding 1, the other half — a tab already flagged pending-close by an
+     * earlier reconcile, and STILL dead on this one, has now been read dead on two independent,
+     * separately-connected reconciles. That is strong enough evidence to actually close it. Mutate
+     * this away (never close a flagged tab) and this test must fail — the original #359 growth bug
+     * would come back for good.
+     */
+    @Test
+    void aTabAlreadyFlaggedPendingCloseIsClosedWhenStillDeadOnALaterReconcile() {
+        FakeHerdr herdr = new FakeHerdr()
+                .withWorkspace("wL", "fleet")
+                .withTab("wL", "wL:t1", "lead: opus [fleetd:pending-close]"); // flagged last reconcile, still dead
+
+        assertEquals(1, launcher(herdr, configWith(lead("opus", "lead: opus", 1))).ensureLeads());
+
+        assertTrue(herdr.called("tab.close"),
+                "a tab dead on two independent reconciles must finally be closed");
+        assertEquals("wL:t1", ((Map<?, ?>) herdr.lastCall("tab.close").params()).get("tab_id"));
+    }
+
+    /** All of several already-flagged, still-dead tabs are closed — not just the first found. */
+    @Test
+    void allTabsAlreadyFlaggedPendingCloseAreClosedWhenStillDead() {
+        FakeHerdr herdr = new FakeHerdr()
+                .withWorkspace("wL", "fleet")
+                .withTab("wL", "wL:t1", "lead: opus [fleetd:pending-close]")
+                .withTab("wL", "wL:t2", "lead: opus [fleetd:pending-close]")
+                .withTab("wL", "wL:t3", "lead: opus [fleetd:pending-close]");
+
+        assertEquals(1, launcher(herdr, configWith(lead("opus", "lead: opus", 1))).ensureLeads());
+
+        List<Object> closedTabIds = herdr.calls.stream()
+                .filter(c -> c.method().equals("tab.close"))
+                .<Object>map(c -> ((Map<?, ?>) c.params()).get("tab_id"))
+                .toList();
+        assertEquals(3, closedTabIds.size(),
+                "every confirmed-dead labelled tab must be closed, not just the first one found");
+        assertEquals(Set.of("wL:t1", "wL:t2", "wL:t3"), Set.copyOf(closedTabIds));
+    }
+
+    /**
+     * A tab flagged pending-close on a previous reconcile that is running an agent again — the miss
+     * that flagged it was transient. It must never be closed, and its flag must be cleared so a
+     * future, unrelated miss starts its own two-reading count from zero.
+     */
+    @Test
+    void aFlaggedTabRunningAnAgentAgainHasItsFlagClearedInsteadOfBeingClosed() {
+        FakeHerdr herdr = new FakeHerdr()
+                .withWorkspace("wL", "fleet")
+                .withTab("wL", "wL:t1", "lead: opus [fleetd:pending-close]")
+                .withAgent("lead-opus", "term_lead", "wL:p1", "wL:t1"); // it recovered — really alive now
+
+        assertEquals(0, launcher(herdr, configWith(lead("opus", "lead: opus", 1))).ensureLeads(),
+                "the lead is live again — nothing to relaunch");
+
+        assertFalse(herdr.called("tab.close"), "a tab running an agent again must never be closed");
+        assertFalse(herdr.called("agent.start"), "the lead is live again — nothing to relaunch");
+        assertEquals("wL:t1", ((Map<?, ?>) herdr.lastCall("tab.rename").params()).get("tab_id"));
+        assertEquals("lead: opus", ((Map<?, ?>) herdr.lastCall("tab.rename").params()).get("label"),
+                "the pending-close flag must be cleared once the tab is confirmed live again");
+    }
+
+    /** Every {@code tab.rename} call whose label carries the pending-close marker, by tab id. */
+    private static Set<String> flaggedTabIds(FakeHerdr herdr) {
+        return herdr.calls.stream()
+                .filter(c -> c.method().equals("tab.rename"))
+                .filter(c -> String.valueOf(((Map<?, ?>) c.params()).get("label"))
+                        .endsWith("[fleetd:pending-close]"))
+                .map(c -> String.valueOf(((Map<?, ?>) c.params()).get("tab_id")))
+                .collect(java.util.stream.Collectors.toUnmodifiableSet());
+    }
+
     /**
      * A lead the operator opened by hand is live once its tab carries the configured `tab:` label —
      * CB-579 retired the `terminal:` pin, so a hand-opened lead is found the same way an

fleetd/src/test/java/dev/ltms/fleet/mcp/FleetMcpLeadCoordTest.java

@@ -1,6 +1,7 @@
 package dev.ltms.fleet.mcp;
 
 import dev.ltms.fleet.msg.FakeLeadChannel;
+import dev.ltms.fleet.msg.LeadChannel;
 import dev.ltms.fleet.msg.LeadMessage;
 import io.modelcontextprotocol.spec.McpSchema;
 import org.junit.jupiter.api.Test;
@@ -93,4 +94,56 @@ class FleetMcpLeadCoordTest {
         assertTrue(FleetMcp.sendToLead(channel, PEER, "   ", null, null).isError());
         assertEquals(0, channel.published().size());
     }
+
+    /**
+     * fleetd #361: "delivered" overstated what publish actually proves — the broker's confirm means
+     * durably queued, not read. A zero-consumer target is the observable form of "this will not
+     * reach a pane right now", so the (still-successful) result must say so.
+     */
+    @Test
+    void warnsWhenThePeerMailboxHasNoConsumersButStillReportsSuccess() {
+        var channel = new FakeLeadChannel(SELF)
+                .withMailbox(PEER, LeadChannel.MailboxState.exists(PEER, 0, 0));
+
+        McpSchema.CallToolResult res = FleetMcp.sendToLead(channel, PEER, "hi", null, null);
+
+        assertFalse(res.isError(), "a zero-consumer mailbox is still a successful, durably-queued publish");
+        String out = textOf(res);
+        assertTrue(out.contains("durably confirmed"), out);
+        assertTrue(out.toLowerCase().contains("no consumers"), () -> "must warn nobody is reading it: " + out);
+    }
+
+    @Test
+    void staysQuietAboutConsumersWhenThePeerMailboxHasOne() {
+        var channel = new FakeLeadChannel(SELF)
+                .withMailbox(PEER, LeadChannel.MailboxState.exists(PEER, 0, 1));
+
+        McpSchema.CallToolResult res = FleetMcp.sendToLead(channel, PEER, "hi", null, null);
+
+        assertFalse(res.isError());
+        String out = textOf(res);
+        assertTrue(out.contains("durably confirmed"), out);
+        assertFalse(out.toLowerCase().contains("no consumers"), () -> "a consumer IS attached: " + out);
+    }
+
+    /**
+     * fleetd #361 review finding 1: an unmeasured fact must never render as a definite one. When
+     * the post-publish probe could not determine the mailbox's consumer count at all (broker slow,
+     * unreachable, or the probe timed out — {@link LeadChannel.MailboxState#unknown}), the result
+     * must stay just as quiet as the has-a-consumer case — never assert "no consumers" for a mailbox
+     * this call never actually measured.
+     */
+    @Test
+    void staysQuietAboutConsumersWhenThePeerMailboxStateIsUnknown() {
+        var channel = new FakeLeadChannel(SELF)
+                .withMailbox(PEER, LeadChannel.MailboxState.unknown(PEER));
+
+        McpSchema.CallToolResult res = FleetMcp.sendToLead(channel, PEER, "hi", null, null);
+
+        assertFalse(res.isError(), "an unresolved post-publish probe must never turn a durably-confirmed publish into an error");
+        String out = textOf(res);
+        assertTrue(out.contains("durably confirmed"), out);
+        assertFalse(out.toLowerCase().contains("no consumers"),
+                () -> "an unmeasured fact must never be reported as a definite zero-consumer mailbox: " + out);
+    }
 }

fleetd/src/test/java/dev/ltms/fleet/mcp/FleetMcpTest.java

@@ -10,6 +10,9 @@ import dev.ltms.fleet.herdr.FakeHerdr;
 import dev.ltms.fleet.herdr.PaneLocator;
 import dev.ltms.fleet.herdr.WorkspaceControl;
 import dev.ltms.fleet.inject.Injector;
+import dev.ltms.fleet.msg.FakeLeadChannel;
+import dev.ltms.fleet.msg.LeadChannel;
+import dev.ltms.fleet.msg.LeadMessage;
 import dev.ltms.fleet.msg.MessageService;
 import dev.ltms.fleet.msg.Rendezvous;
 import dev.ltms.fleet.session.FakeWorktrees;
@@ -34,7 +37,9 @@ import java.util.Map;
 import java.util.EnumSet;
 import java.util.Set;
 import java.util.concurrent.CompletableFuture;
+import java.util.concurrent.CountDownLatch;
 import java.util.concurrent.TimeUnit;
+import java.util.concurrent.atomic.AtomicBoolean;
 import java.util.function.Function;
 
 import static org.junit.jupiter.api.Assertions.*;
@@ -103,8 +108,10 @@ class FleetMcpTest {
         }
         assertTrue(rendezvous.isWaiting("term_a"), "send should have opened its waiter");
 
+        // fleetd #365: a resolved live send must read distinctly from a merely-queued reply —
+        // see replyWithNoPendingSendIsQueuedNotError below for the other case.
         McpSchema.CallToolResult reply = FleetMcp.reply(messages, "term_a", "LGTM");
-        assertEquals("delivered", textOf(reply));
+        assertEquals(MessageService.ReplyOutcome.RESOLVED_SEND.description(), textOf(reply));
 
         McpSchema.CallToolResult res = send.get(6, TimeUnit.SECONDS);
         assertNotEquals(Boolean.TRUE, res.isError());
@@ -130,7 +137,7 @@ class FleetMcpTest {
         assertTrue(rendezvous.isWaiting("term_a"), "send should have opened its waiter");
 
         McpSchema.CallToolResult reply = FleetMcp.reply(messages, "term_a", "async LGTM");
-        assertEquals("delivered", textOf(reply));
+        assertEquals(MessageService.ReplyOutcome.RESOLVED_SEND.description(), textOf(reply));
 
         // Poll until the async send completes and reports the reply.
         McpSchema.CallToolResult polled = FleetMcp.poll(messages, ticket, null);
@@ -323,9 +330,10 @@ class FleetMcpTest {
     @Test
     void replyWithNoPendingSendIsQueuedNotError() {
         // CB-307: a reply with no open send is now queued in the inbox, not an error.
+        // fleetd #365: it must also no longer claim "delivered" — nothing was waiting for it.
         McpSchema.CallToolResult res = FleetMcp.reply(messages, "term_a", "orphan");
         assertNotEquals(Boolean.TRUE, res.isError(), "a queued reply is not an error");
-        assertEquals("delivered", textOf(res));
+        assertEquals(MessageService.ReplyOutcome.QUEUED.description(), textOf(res));
 
         // The reply is drainable by target.
         var drained = messages.drainReplies("term_a");
@@ -408,7 +416,7 @@ class FleetMcpTest {
         }
         assertTrue(rendezvous.isWaiting("term_a"), "the answer should have reopened a waiter");
         McpSchema.CallToolResult reply = FleetMcp.reply(messages, "term_a", "done");
-        assertEquals("delivered", textOf(reply));
+        assertEquals(MessageService.ReplyOutcome.RESOLVED_SEND.description(), textOf(reply));
         assertEquals("done", textOf(answer.get(6, TimeUnit.SECONDS)));
     }
 
@@ -576,17 +584,48 @@ class FleetMcpTest {
     void listReportsThisDaemonsOwnCoordIdWhenLeadCoordinationIsOn() {
         FakeHerdr h = new FakeHerdr();
         SessionManager sessions = new SessionManager(workerService(h, "http://gx00.gw:8000", Set.of("gx00.gw")));
+        FakeLeadChannel channel = new FakeLeadChannel("mac-opus")
+                .withMailbox("mac-opus", LeadChannel.MailboxState.exists("mac-opus", 0, 1));
 
         McpSchema.CallToolResult res = FleetMcp.listFleet(
                 workerService(h, "http://gx00.gw:8000", Set.of("gx00.gw")), sessions, null,
                 FleetMcp.CapacitySource.none(), new FleetMcp.HealthCoverageSource(() -> "off"),
-                FleetMcp.QuarantineSource.none(), Map.of(), "", "mac-opus");
+                FleetMcp.QuarantineSource.none(), Map.of(), "",
+                new FleetMcp.CoordinationSource(channel, List.of()));
 
         String out = textOf(res);
-        // There is no peer-discovery surface yet, so this row answers the one question an operator
-        // cannot answer any other way: which coord-id a peer must use to reach ME.
+        // fleetd #361: reports both which coord-id a peer must use to reach ME, and this daemon's
+        // own mailbox state (a self-diagnosis: is my own consumer actually attached?).
         assertTrue(out.contains("\"coordinator\""), out);
         assertTrue(out.contains("\"selfId\":\"mac-opus\""), out);
+        assertTrue(out.contains("\"mailbox\":{\"status\":\"exists\",\"pending\":0,\"consumers\":1}"), out);
+        assertTrue(out.contains("\"held\":[]"), out);
+        assertTrue(out.contains("\"peers\":[]"), out);
+    }
+
+    /**
+     * fleetd #361 review finding 1: a self-probe that could not complete (broker unreachable, timed
+     * out) must never render the same as a measured "0 pending, 0 consumers" — that was exactly the
+     * bug: a reader could not tell "my mailbox is empty and idle" from "I could not check", and the
+     * second one is the far more alarming state.
+     */
+    @Test
+    void listReportsAnUnresolvedSelfProbeAsUnknownNeverAsAMeasuredZero() {
+        FakeHerdr h = new FakeHerdr();
+        SessionManager sessions = new SessionManager(workerService(h, "http://gx00.gw:8000", Set.of("gx00.gw")));
+        FakeLeadChannel channel = new FakeLeadChannel("mac-opus")
+                .withMailbox("mac-opus", LeadChannel.MailboxState.unknown("mac-opus"));
+
+        McpSchema.CallToolResult res = FleetMcp.listFleet(
+                workerService(h, "http://gx00.gw:8000", Set.of("gx00.gw")), sessions, null,
+                FleetMcp.CapacitySource.none(), new FleetMcp.HealthCoverageSource(() -> "off"),
+                FleetMcp.QuarantineSource.none(), Map.of(), "",
+                new FleetMcp.CoordinationSource(channel, List.of()));
+
+        String out = textOf(res);
+        assertTrue(out.contains("\"mailbox\":{\"status\":\"unknown\"}"), out);
+        assertFalse(out.contains("\"pending\""), "an unresolved probe must never carry a pending count at all: " + out);
+        assertFalse(out.contains("\"consumers\""), "an unresolved probe must never carry a consumers count at all: " + out);
     }
 
     @Test
@@ -601,6 +640,110 @@ class FleetMcpTest {
                 "an ordinary fleet's output must be unchanged by this feature");
     }
 
+    @Test
+    void listReportsHeldMessagesWithATruncatedPreviewNeverTheFullBody() {
+        FakeHerdr h = new FakeHerdr();
+        SessionManager sessions = new SessionManager(workerService(h, "http://gx00.gw:8000", Set.of("gx00.gw")));
+        String longContent = "x".repeat(200);
+        FakeLeadChannel channel = new FakeLeadChannel("mac-opus")
+                .hold(new LeadMessage("m1", "fleet01-lead", "mac-opus", longContent));
+
+        McpSchema.CallToolResult res = FleetMcp.listFleet(
+                workerService(h, "http://gx00.gw:8000", Set.of("gx00.gw")), sessions, null,
+                FleetMcp.CapacitySource.none(), new FleetMcp.HealthCoverageSource(() -> "off"),
+                FleetMcp.QuarantineSource.none(), Map.of(), "",
+                new FleetMcp.CoordinationSource(channel, List.of()));
+
+        String out = textOf(res);
+        assertTrue(out.contains("\"msgId\":\"m1\""), out);
+        assertTrue(out.contains("\"from\":\"fleet01-lead\""), out);
+        assertFalse(out.contains(longContent), "fleet_list must never dump a held message's full body: " + out);
+        assertTrue(out.contains("x".repeat(80) + "…"), "expected an 80-char preview with an ellipsis: " + out);
+    }
+
+    @Test
+    void listReportsEachDeclaredPeersLiveReachability() {
+        FakeHerdr h = new FakeHerdr();
+        SessionManager sessions = new SessionManager(workerService(h, "http://gx00.gw:8000", Set.of("gx00.gw")));
+        FakeLeadChannel channel = new FakeLeadChannel("mac-opus")
+                .withMailbox("fleet01-lead", LeadChannel.MailboxState.exists("fleet01-lead", 2, 1))
+                .withMailbox("fleet03-lead", LeadChannel.MailboxState.unknown("fleet03-lead"));
+        // "fleet02-lead" is declared as a peer but never configured on the fake — inspect() falls
+        // back to MailboxState.absent, exactly as a real down (never-run) peer would report.
+        // "fleet03-lead" IS configured, as unknown — a broker that could not be reached in time,
+        // which review finding 1 says must render distinctly from "fleet02-lead"'s confirmed absence.
+
+        McpSchema.CallToolResult res = FleetMcp.listFleet(
+                workerService(h, "http://gx00.gw:8000", Set.of("gx00.gw")), sessions, null,
+                FleetMcp.CapacitySource.none(), new FleetMcp.HealthCoverageSource(() -> "off"),
+                FleetMcp.QuarantineSource.none(), Map.of(), "",
+                new FleetMcp.CoordinationSource(channel, List.of("fleet01-lead", "fleet02-lead", "fleet03-lead")));
+
+        String out = textOf(res);
+        assertTrue(out.contains("\"coordId\":\"fleet01-lead\",\"status\":\"exists\",\"pending\":2,\"consumers\":1"), out);
+        assertTrue(out.contains("\"coordId\":\"fleet02-lead\",\"status\":\"absent\""), out);
+        assertTrue(out.contains("\"coordId\":\"fleet03-lead\",\"status\":\"unknown\""), out);
+        assertFalse(out.contains("\"coordId\":\"fleet02-lead\",\"status\":\"absent\",\"pending\""),
+                "pending/consumers must be omitted, not faked as zero, for a confirmed-absent peer: " + out);
+        assertFalse(out.contains("\"coordId\":\"fleet03-lead\",\"status\":\"unknown\",\"pending\""),
+                "pending/consumers must be omitted, not faked as zero, for an unresolved peer probe: " + out);
+    }
+
+    /**
+     * fleetd #361 review finding 2: {@code get(timeout)} alone times out the CALLER but leaves the
+     * submitted {@link LeadChannel#inspect} task running forever on its own virtual thread — against
+     * a hung (not down) broker every probe would orphan one more thread holding an AMQP channel
+     * until the connection's channel-max is exhausted, which would break {@code publish} too. This
+     * proves {@link FleetMcp#probe(LeadChannel, String, long)} does not merely give up on a slow
+     * task: it interrupts it, so the task does not go on running unbounded after the caller has
+     * already moved on. No hung broker needed — a {@link LeadChannel} fake that blocks until
+     * interrupted is enough to observe the same mechanism.
+     */
+    @Test
+    void aTimedOutProbeInterruptsTheOrphanedTaskRatherThanAbandoningIt() throws Exception {
+        CountDownLatch started = new CountDownLatch(1);
+        AtomicBoolean wasInterrupted = new AtomicBoolean(false);
+        LeadChannel hangs = new LeadChannel() {
+            @Override
+            public void publish(String toCoordId, LeadMessage m) { }
+
+            @Override
+            public List<LeadMessage> peek() { return List.of(); }
+
+            @Override
+            public void ack(String msgId) { }
+
+            @Override
+            public String selfCoordId() { return "mac-opus"; }
+
+            @Override
+            public MailboxState inspect(String coordId) {
+                started.countDown();
+                try {
+                    Thread.sleep(60_000);
+                } catch (InterruptedException e) {
+                    wasInterrupted.set(true);
+                    Thread.currentThread().interrupt();
+                }
+                return MailboxState.unknown(coordId);
+            }
+        };
+
+        LeadChannel.MailboxState result = FleetMcp.probe(hangs, "fleet01-lead", 100L);
+
+        assertFalse(result.exists(), "a timed-out probe must never claim the mailbox exists");
+        assertFalse(result.known(), "a timed-out probe proves nothing either way — it must report unknown");
+        assertTrue(started.await(2, TimeUnit.SECONDS), "the probe task must actually have started");
+        // The interrupt is delivered asynchronously to the orphaned task's own thread — poll briefly
+        // rather than assume it has already landed the instant probe() returns.
+        long deadline = System.nanoTime() + TimeUnit.SECONDS.toNanos(2);
+        while (!wasInterrupted.get() && System.nanoTime() < deadline) {
+            Thread.sleep(20);
+        }
+        assertTrue(wasInterrupted.get(),
+                "probe() must cancel the orphaned task (interrupt it) instead of leaving it to run forever");
+    }
+
     @Test
     void capacityUsesThePlacementLiveCount() {
         FakeHerdr h = new FakeHerdr();
@@ -911,7 +1054,8 @@ class FleetMcpTest {
         String out = textOf(FleetMcp.listFleet(workerService(h, "http://gx00.gw:8000", Set.of("gx00.gw")),
                 sessions, null, new FleetMcp.CapacitySource(profile -> 2, profile -> 3,
                 () -> Set.of("sonnet"), () -> 0), new FleetMcp.HealthCoverageSource(() -> "off"),
-                FleetMcp.QuarantineSource.none(), FleetMcp.OutageSource.none(), leadSeats, Map.of(), "", null));
+                FleetMcp.QuarantineSource.none(), FleetMcp.OutageSource.none(), leadSeats, Map.of(), "",
+                FleetMcp.CoordinationSource.none()));
 
         assertTrue(out.contains("\"maxLoad\":3"), "maxLoad itself must be left untouched: " + out);
         assertTrue(out.contains("\"live\":2"), out);
@@ -934,7 +1078,8 @@ class FleetMcpTest {
         String out = textOf(FleetMcp.listFleet(workerService(h, "http://gx00.gw:8000", Set.of("gx00.gw")),
                 sessions, null, new FleetMcp.CapacitySource(profile -> 0, profile -> 3,
                 () -> Set.of("sonnet"), () -> 0), new FleetMcp.HealthCoverageSource(() -> "off"),
-                FleetMcp.QuarantineSource.none(), FleetMcp.OutageSource.none(), leadSeats, Map.of(), "", null));
+                FleetMcp.QuarantineSource.none(), FleetMcp.OutageSource.none(), leadSeats, Map.of(), "",
+                FleetMcp.CoordinationSource.none()));
 
         assertTrue(out.contains("\"live\":0"), out);
         assertTrue(out.contains("\"free\":3"), "the real gate never subtracts the lead's seat: " + out);
@@ -988,7 +1133,7 @@ class FleetMcpTest {
         String out = textOf(FleetMcp.listFleet(composite, sm, null,
                 new FleetMcp.CapacitySource(liveCount, p -> profiles.get(p).maxLoad(), profiles::keySet, () -> 0),
                 new FleetMcp.HealthCoverageSource(() -> "off"), FleetMcp.QuarantineSource.none(),
-                FleetMcp.OutageSource.none(), leadSeats, Map.of(), "", null));
+                FleetMcp.OutageSource.none(), leadSeats, Map.of(), "", FleetMcp.CoordinationSource.none()));
         int reportedFree = extractInt(out, "free");
 
         for (int i = 0; i < reportedFree; i++) {
@@ -1017,7 +1162,7 @@ class FleetMcpTest {
                 sessions, null, new FleetMcp.CapacitySource(profile -> 0, profile -> 2,
                 () -> Set.of("terra"), () -> 0), new FleetMcp.HealthCoverageSource(() -> "off"),
                 FleetMcp.QuarantineSource.none(), FleetMcp.OutageSource.none(), FleetMcp.LeadSeatSource.none(),
-                Map.of(), "", null));
+                Map.of(), "", FleetMcp.CoordinationSource.none()));
 
         assertTrue(out.contains("\"free\":2"), out);
         assertFalse(out.contains("leadSeats"), "no lead shares this profile's credential: " + out);

fleetd/src/test/java/dev/ltms/fleet/member/EnvAllowListScrubTest.java

@@ -8,6 +8,7 @@ import java.nio.charset.StandardCharsets;
 import java.nio.file.Files;
 import java.nio.file.Path;
 import java.util.ArrayList;
+import java.util.HashMap;
 import java.util.HashSet;
 import java.util.List;
 import java.util.Map;
@@ -17,6 +18,7 @@ import java.util.regex.Matcher;
 import java.util.regex.Pattern;
 
 import static org.junit.jupiter.api.Assertions.assertEquals;
+import static org.junit.jupiter.api.Assertions.assertFalse;
 import static org.junit.jupiter.api.Assertions.assertNotNull;
 import static org.junit.jupiter.api.Assertions.assertNull;
 import static org.junit.jupiter.api.Assertions.assertTrue;
@@ -45,6 +47,15 @@ class EnvAllowListScrubTest {
     /** Env var names appearing in command output; anything else (prompts, wrapped lines) is noise. */
     private static final Pattern ENV_NAME = Pattern.compile("^([A-Za-z_][A-Za-z0-9_]*)$");
 
+    /**
+     * fleetd #388: the sentinel name the generated {@code .zshenv} guard uses, kept here as a
+     * literal rather than referencing {@link EnvAllowListScrub#SCRUB_SENTINEL} — the two tests that
+     * use it must still compile and run against the pre-fix production class (which has no such
+     * constant), so the revert-and-prove-it-fails step exercises a real assertion instead of a
+     * compilation error.
+     */
+    private static final String SCRUB_SENTINEL_NAME = "_CB633_SCRUBBED";
+
     /**
      * The equality test. Expected survivors = baseline exports ∩ allowed — i.e. every survivor is
      * allowed AND every allowed name that existed survives. The operator's own secret-store exports
@@ -108,6 +119,68 @@ class EnvAllowListScrubTest {
                 "allowed N of M with N <= M — the denominator is always reported");
     }
 
+    /**
+     * A pane inherits {@code UID}; a cleared test parent does not. The scrub must survive it.
+     *
+     * <p>Every other test here starts zsh from a CLEARED environment, so {@code UID} is never an
+     * exported name and never reaches the blanking loop. In a real member pane it is exported and
+     * it IS reached — and {@code export UID=} is a fatal zsh parameter error that aborts the whole
+     * sourced file, leaving every later name unscrubbed and writing no report at all. The abort is
+     * silent: the loop is wrapped in {@code 2>/dev/null}.
+     *
+     * <p>The assertion is deliberately "a report exists" rather than "the canary is blanked". The
+     * report is written by the last statement in the file, so its presence proves the script ran
+     * to completion; the canary alone would depend on where it happens to sit in {@code env} order.
+     * Both are checked, but only the first one fails deterministically without the fix.
+     */
+    @Test
+    void scrubSurvivesAnInheritedUidTheWayARealPaneHasIt(@TempDir Path tmp) throws Exception {
+        assumeTrue(Files.isExecutable(ZSH), "/bin/zsh not present — nothing to prove here");
+        Set<String> allowed = MemberEnvAllowList.derive(List.of());
+        Path zdotdir = EnvAllowListScrub.generate(tmp, allowed);
+
+        // The production shape: UID present and exported, as every pane shell inherits it.
+        Map<String, String> paneLikeParent = Map.of(
+                "HOME", System.getProperty("user.home"),
+                "PATH", "/usr/bin:/bin",
+                "SHELL", "/bin/zsh",
+                "UID", "1000",
+                "CB633_CANARY", "must-not-survive-the-scrub");
+        Set<String> survivors = exportedNamesFromCleanParent(paneLikeParent, zdotdir);
+
+        EnvAllowListScrub.ScrubReport report = EnvAllowListScrub.readReport(zdotdir);
+        assertNotNull(report,
+                "an inherited UID must not abort the scrub — no report means the file died mid-loop "
+                        + "and every name after UID in `env` order was left unscrubbed");
+        assertFalse(survivors.contains("CB633_CANARY"),
+                "a non-allow-listed name must still be blanked when UID is in the environment");
+    }
+
+    /** A group-shared ZDOTDIR still lets the member truncate and write its pre-created receipt. */
+    @Test
+    void groupSharedScrubWritesAndReadsItsReport(@TempDir Path tmp) throws Exception {
+        assumeTrue(Files.isExecutable(ZSH), "/bin/zsh not present — nothing to prove here");
+        Set<String> allowed = MemberEnvAllowList.derive(List.of());
+        Path zdotdir = EnvAllowListScrub.generate(tmp, allowed, currentUserGroup());
+
+        Map<String, String> cleanParent = Map.of(
+                "HOME", System.getProperty("user.home"),
+                "PATH", "/usr/bin:/bin",
+                "SHELL", "/bin/zsh");
+        exportedNamesFromCleanParent(cleanParent, zdotdir);
+
+        EnvAllowListScrub.ScrubReport report = EnvAllowListScrub.readReport(zdotdir);
+        assertNotNull(report, "a group-shared completed login shell must leave a report behind");
+        assertTrue(report.allowed() >= 0 && report.total() >= report.allowed(),
+                "allowed N of M with N <= M — the denominator is always reported");
+        assertEquals("rw-rw----", java.nio.file.attribute.PosixFilePermissions.toString(
+                        Files.getPosixFilePermissions(zdotdir.resolve(EnvAllowListScrub.REPORT_FILE))),
+                "the pre-created receipt must be group-writable");
+        assertEquals("rwxr-x---", java.nio.file.attribute.PosixFilePermissions.toString(
+                        Files.getPosixFilePermissions(zdotdir)),
+                "group sharing must not make the ZDOTDIR directory group-writable");
+    }
+
     /** Report parsing is lenient: absent file → null (no measurement), not an exception. */
     @Test
     void readReportReturnsNullForADirectoryWithoutOne(@TempDir Path dir) {
@@ -224,6 +297,140 @@ class EnvAllowListScrubTest {
                         + "shell. A difference here means the scrub is dead on Linux.");
     }
 
+    /**
+     * fleetd #388: the actual gap. zsh reads {@code .zshenv} always, {@code .zprofile}/
+     * {@code .zlogin} only for a LOGIN shell, and {@code .zshrc} only for an INTERACTIVE one — so a
+     * shell that is NEITHER (a bare {@code /bin/zsh} reading a script off a non-tty stdin, no
+     * {@code -l}, no {@code -i}) reads only {@code .zshenv} and stops. Before this fix, that shell
+     * never reached {@code scrub.zsh} at all: the decoy secret below would survive untouched. This
+     * test injects that decoy directly into the process environment (not via a sourced dotfile,
+     * since the whole point of the gap is that {@code .zshenv} is normally close to empty) so the
+     * test does not depend on any real {@code ~/.zshrc} content existing on the host.
+     */
+    @Test
+    void scrubRunsInAShellThatIsNeitherLoginNorInteractive(@TempDir Path tmp) throws Exception {
+        assumeTrue(Files.isExecutable(ZSH), "/bin/zsh not present — nothing to prove here");
+        Set<String> allowed = MemberEnvAllowList.derive(List.of());
+        Path zdotdir = EnvAllowListScrub.generate(tmp, allowed);
+
+        Map<String, String> cleanParent = new HashMap<>(Map.of(
+                "HOME", System.getProperty("user.home"),
+                "PATH", "/usr/bin:/bin",
+                "SHELL", "/bin/zsh",
+                "USER", System.getProperty("user.name", "nobody"),
+                "TMPDIR", tmp.toString()));
+        cleanParent.put("FLEETD_TEST_DECOY_SECRET", "x"); // not on any allow-list; must be blanked
+
+        List<String> neither = List.of(); // no -l, no -i; stdin is a pipe (never a tty) either way
+        Set<String> baseline = exportedNamesFromCleanParent(cleanParent, null, neither);
+        Set<String> scrubbed = exportedNamesFromCleanParent(cleanParent, zdotdir, neither);
+
+        Set<String> expected = new TreeSet<>();
+        for (String name : baseline) {
+            if (MemberEnvAllowList.keeps(allowed, name)) {
+                expected.add(name);
+            }
+        }
+        assertTrue(baseline.contains("FLEETD_TEST_DECOY_SECRET"),
+                "sanity: the decoy must actually reach the un-scrubbed baseline, or this test proves "
+                        + "nothing");
+        expected.add("ZDOTDIR"); // the harness set it and it is infrastructure, so it must survive
+        expected.add(SCRUB_SENTINEL_NAME); // set by the new .zshenv guard once scrubbed
+        assertEquals(expected, scrubbed,
+                "a pane shell that is NEITHER login nor interactive must still be scrubbed — its "
+                        + "surviving exported names must EQUAL baseline ∩ allow-list, plus the "
+                        + "sentinel the guard sets once it has run. FLEETD_TEST_DECOY_SECRET surviving "
+                        + "here means the gap is still open.");
+    }
+
+    /**
+     * fleetd #388 invariants 3 and 4, which a name-set equality cannot show: a member's own tooling
+     * forks plain, non-login, non-interactive zsh processes for a single command (the same shape as
+     * the pane shell itself), and such a child must (a) keep whatever its parent deliberately set
+     * for it, never (b) re-run the scrub and blank it, and never (c) overwrite the pane's own
+     * {@code scrub-report.txt} with a description of itself instead of the pane. All three can only
+     * be shown by actually running a child process from within the scrubbed pane shell.
+     *
+     * <p>The pane and the child both report presence via {@code ${NAME:+present}} — empty when a
+     * name is unset OR blanked (exported empty), {@code present} when it is set and non-empty. No
+     * value is ever printed, only these two shapes and the literal word {@code set}/{@code unset}
+     * for the sentinel.
+     */
+    @Test
+    void neitherShellChildKeepsParentVariablesAndReceiptStillDescribesThePane(@TempDir Path tmp) throws Exception {
+        assumeTrue(Files.isExecutable(ZSH), "/bin/zsh not present — nothing to prove here");
+        Set<String> allowed = MemberEnvAllowList.derive(List.of());
+        Path zdotdir = EnvAllowListScrub.generate(tmp, allowed);
+
+        Map<String, String> paneEnv = new HashMap<>(Map.of(
+                "HOME", System.getProperty("user.home"),
+                "PATH", "/usr/bin:/bin",
+                "SHELL", "/bin/zsh",
+                "USER", System.getProperty("user.name", "nobody"),
+                "TMPDIR", tmp.toString()));
+        paneEnv.put("FLEETD_TEST_DECOY_SECRET", "x"); // not allow-listed; the pane must blank it
+        paneEnv.put("ZDOTDIR", zdotdir.toAbsolutePath().toString());
+
+        // The pane's own script reports what IT sees, then forks a plain non-login, non-interactive
+        // child — the shape a member's own tooling uses — carrying a variable the "parent" (this
+        // pane) deliberately set for it, the way git sets GIT_DIR for a hook.
+        String outerScript = """
+                print -r -- "PANE_SENTINEL=${%1$s:+set}"
+                print -r -- "PANE_DECOY=${FLEETD_TEST_DECOY_SECRET:+present}"
+                FLEETD_TEST_TOOL_VAR=keep /bin/zsh <<'CHILD'
+                print -r -- "CHILD_LOGIN=$([[ -o login ]] && echo yes || echo no)"
+                print -r -- "CHILD_INTERACTIVE=$([[ -o interactive ]] && echo yes || echo no)"
+                print -r -- "CHILD_TOOL_VAR=${FLEETD_TEST_TOOL_VAR:+present}"
+                print -r -- "CHILD_DECOY=${FLEETD_TEST_DECOY_SECRET:+present}"
+                print -r -- "CHILD_SENTINEL=${%1$s:+set}"
+                CHILD
+                exit
+                """.formatted(SCRUB_SENTINEL_NAME);
+
+        ProcessBuilder pb = new ProcessBuilder("/bin/zsh"); // no -l, no -i: the pane's own shape
+        pb.environment().clear();
+        pb.environment().putAll(paneEnv);
+        pb.redirectError(ProcessBuilder.Redirect.DISCARD);
+        Process zsh = pb.start();
+        zsh.getOutputStream().write(outerScript.getBytes(StandardCharsets.UTF_8));
+        zsh.getOutputStream().flush();
+        zsh.getOutputStream().close();
+        String stdout = new String(zsh.getInputStream().readAllBytes(), StandardCharsets.UTF_8);
+        assertTrue(zsh.waitFor(60, java.util.concurrent.TimeUnit.SECONDS),
+                "the pane+child probe did not exit within 60s");
+        assertTrue(zsh.exitValue() == 0, "probe zsh exited non-zero: " + stdout);
+
+        Map<String, String> reported = new HashMap<>();
+        for (String line : stdout.split("\n")) {
+            int eq = line.indexOf('=');
+            if (eq > 0) {
+                reported.put(line.substring(0, eq).trim(), line.substring(eq + 1).trim());
+            }
+        }
+
+        assertEquals("set", reported.get("PANE_SENTINEL"),
+                "the pane itself is neither login nor interactive, so the .zshenv guard must have "
+                        + "run the scrub and exported the sentinel");
+        assertEquals("", reported.get("PANE_DECOY"),
+                "the pane must blank a non-allow-listed name — invariant 1");
+        assertEquals("no", reported.get("CHILD_LOGIN"), "sanity: the child must also be non-login");
+        assertEquals("no", reported.get("CHILD_INTERACTIVE"), "sanity: the child must also be non-interactive");
+        assertEquals("present", reported.get("CHILD_TOOL_VAR"),
+                "invariant 3: a variable the pane deliberately set for its child must survive — a "
+                        + "child that re-ran the scrub would have blanked it");
+        assertEquals("", reported.get("CHILD_DECOY"),
+                "a name already blanked by the pane must stay blanked in the child, never resurrected");
+        assertEquals("set", reported.get("CHILD_SENTINEL"),
+                "the child must inherit the sentinel from the pane's environment, or it would re-scrub");
+
+        EnvAllowListScrub.ScrubReport report = EnvAllowListScrub.readReport(zdotdir);
+        assertNotNull(report, "the pane's own scrub pass must leave a report behind");
+        assertTrue(report.blanked().stream().noneMatch(n -> n.startsWith("FLEETD_TEST_TOOL_VAR")),
+                "invariant 4: the receipt must still describe the PANE, not the child — a child that "
+                        + "re-ran the scrub would have rewritten this file to list its own "
+                        + "FLEETD_TEST_TOOL_VAR as blanked");
+    }
+
     /**
      * Run {@code /bin/zsh -l -i} from a clean parent and return the NAMES it has exported by prompt
      * time. With {@code zdotdir} non-null, {@code ZDOTDIR} points at a generated scrub directory, so

fleetd/src/test/java/dev/ltms/fleet/member/MemberEnvAllowListTest.java

@@ -146,7 +146,7 @@ class MemberEnvAllowListTest {
         return new FleetConfig(null, null, null, Map.of(), null, null, null, null, null,
                 new FleetConfig.Broker(null, brokerUriEnv, null), null, null, null, null, null,
                 null, null, null, null,
-                new FleetConfig.Coordinator(null, coordinatorUriEnv, null, null)).withDefaults();
+                new FleetConfig.Coordinator(null, coordinatorUriEnv, null, null, null)).withDefaults();
     }
 
     /** {@code LC_*} categories are infrastructure by prefix; everything else needs an exact match. */

fleetd/src/test/java/dev/ltms/fleet/msg/FakeLeadChannel.java

@@ -3,6 +3,8 @@ package dev.ltms.fleet.msg;
 import java.util.ArrayList;
 import java.util.Collections;
 import java.util.List;
+import java.util.Map;
+import java.util.concurrent.ConcurrentHashMap;
 
 /**
  * Hermetic stand-in for {@link LeadChannel}: an in-memory mailbox that records what was published
@@ -24,11 +26,19 @@ public final class FakeLeadChannel implements LeadChannel {
     private final List<String> acked = Collections.synchronizedList(new ArrayList<>());
     /** When set, every {@link #publish} throws it — the unroutable/nacked/timed-out peer. */
     private volatile IllegalStateException publishFailure;
+    /** Canned {@link #inspect} results by coord-id — absent for any coord-id not configured here. */
+    private final Map<String, MailboxState> mailboxes = new ConcurrentHashMap<>();
 
     public FakeLeadChannel(String selfCoordId) {
         this.selfCoordId = selfCoordId;
     }
 
+    /** Make {@link #inspect(String)} return {@code state} for {@code coordId} instead of "absent". */
+    public FakeLeadChannel withMailbox(String coordId, MailboxState state) {
+        mailboxes.put(coordId, state);
+        return this;
+    }
+
     /** Make every publish fail as an unreachable peer would. */
     public FakeLeadChannel failPublishWith(String message) {
         this.publishFailure = new IllegalStateException(message);
@@ -65,6 +75,11 @@ public final class FakeLeadChannel implements LeadChannel {
         return selfCoordId;
     }
 
+    @Override
+    public MailboxState inspect(String coordId) {
+        return mailboxes.getOrDefault(coordId, MailboxState.absent(coordId));
+    }
+
     public List<LeadMessage> published() {
         return List.copyOf(published);
     }

fleetd/src/test/java/dev/ltms/fleet/msg/LeadCoordLoopTest.java

@@ -54,6 +54,40 @@ class LeadCoordLoopTest {
         assertTrue(channel.peek().isEmpty(), "and is no longer held");
     }
 
+    @Test
+    void redeliveryOfAMessageAlreadyWrittenToThePaneIsAckedWithoutAnotherPaneWrite() {
+        var channel = new FakeLeadChannel(SELF).hold(new LeadMessage("m1", PEER, SELF, "recover me"));
+        var herdr = new FakeHerdr().agentStatus("idle");
+        var loop = loop(channel, herdr, Map.of(LEAD_TERM, SELF));
+
+        loop.tick();
+        channel.hold(new LeadMessage("m1", PEER, SELF, "recover me"));
+        loop.tick();
+
+        assertEquals(1, prompts(herdr).size(), "a redelivery must not consume the lead pane twice");
+        assertEquals(List.of("m1", "m1"), channel.acked(), "the redelivery still needs a fresh broker ack");
+    }
+
+    @Test
+    void aRedeliveryIsAckedEvenWhileTheLeadIsMidTurn() {
+        var channel = new FakeLeadChannel(SELF).hold(new LeadMessage("m1", PEER, SELF, "recover me"));
+        var herdr = new FakeHerdr().agentStatus("idle");
+        var loop = loop(channel, herdr, Map.of(LEAD_TERM, SELF));
+
+        loop.tick();
+        channel.hold(new LeadMessage("m1", PEER, SELF, "recover me"));
+        herdr.agentStatus("working");
+        loop.tick();
+
+        assertEquals(1, prompts(herdr).size(), "the pane is still written exactly once");
+        assertEquals(List.of("m1", "m1"), channel.acked(),
+                "a message already written to the pane must be acked even mid-turn: the mid-turn "
+                + "gate exists to protect the pane, and this message needs no pane. Gating the ack "
+                + "on it leaves the message held on a lead that is busy most of the time, and every "
+                + "recovery redelivers it again — which is the loop this fix exists to stop");
+        assertTrue(channel.peek().isEmpty(), "so it is no longer held");
+    }
+
     @Test
     void leavesTheMessageUnackedWhenTheLeadIsMidTurn() {
         var channel = new FakeLeadChannel(SELF).hold(new LeadMessage("m1", PEER, SELF, "hello"));

fleetd/src/test/java/dev/ltms/fleet/msg/LeadMailboxIsMissingQueueTest.java

@@ -0,0 +1,77 @@
+package dev.ltms.fleet.msg;
+
+import com.rabbitmq.client.ShutdownSignalException;
+import com.rabbitmq.client.impl.AMQImpl;
+import org.junit.jupiter.api.Test;
+
+import java.io.IOException;
+
+import static org.junit.jupiter.api.Assertions.assertFalse;
+import static org.junit.jupiter.api.Assertions.assertTrue;
+
+/**
+ * fleetd #361 review round 2: a mutation that made {@link LeadMailbox#isMissingQueue} return
+ * {@code true} unconditionally still left {@code mvn clean install} green — 1389 tests, 0
+ * failures — because nothing exercised its false branch. That branch is the whole discriminator
+ * between {@link LeadChannel.MailboxState#absent} and {@link LeadChannel.MailboxState#unknown};
+ * without a test pinning it, a future refactor that widens it back to "always true" (restoring the
+ * exact overstatement fleetd #361 exists to fix) would pass this suite.
+ *
+ * <p>Hermetic — no broker needed, per the review's own suggestion. {@code isMissingQueue} takes a
+ * plain {@link IOException}, so every input here is constructed directly rather than provoked from
+ * a live connection. The real 404 shape itself is still pinned against a real broker, in
+ * {@code LeadMailboxTest.passiveDeclareOfAMissingQueueThrowsAnIOExceptionWrappingA404ShutdownSignal}
+ * — this class covers the three false shapes {@link LeadMailbox#isMissingQueue}'s own javadoc
+ * lists, so both directions of the discriminator are proven somewhere.
+ */
+class LeadMailboxIsMissingQueueTest {
+
+    @Test
+    void aConfirmedMissingQueueIsRecognized() {
+        ShutdownSignalException sse = new ShutdownSignalException(true, false,
+                new AMQImpl.Channel.Close(404, "NOT_FOUND - no queue 'lead.x.inbox' in vhost '/'", 50, 10), null);
+        IOException e = new IOException("channel error", sse);
+
+        assertTrue(LeadMailbox.isMissingQueue(e), "a genuine 404 Channel.Close must be recognized as a missing queue");
+    }
+
+    @Test
+    void aDifferentReplyCodeIsNotAMissingQueue() {
+        // E.g. 403 ACCESS_REFUSED — the queue may well exist; this call was simply refused.
+        ShutdownSignalException sse = new ShutdownSignalException(true, false,
+                new AMQImpl.Channel.Close(403, "ACCESS_REFUSED", 50, 10), null);
+        IOException e = new IOException("channel error", sse);
+
+        assertFalse(LeadMailbox.isMissingQueue(e),
+                "a non-404 reply code must never be read as a confirmed absence — the mailbox's real state is unknown");
+    }
+
+    @Test
+    void aShutdownSignalWhoseReasonIsNotAChannelCloseIsNotAMissingQueue() {
+        // A Connection.Close (a whole different broker-level shutdown) is still a ShutdownSignalException,
+        // but its reason is not a Channel.Close at all — must not be misread as "no such queue".
+        ShutdownSignalException sse = new ShutdownSignalException(true, false,
+                new AMQImpl.Connection.Close(404, "coincidentally 404, but this is a CONNECTION close", 10, 50), null);
+        IOException e = new IOException("connection error", sse);
+
+        assertFalse(LeadMailbox.isMissingQueue(e),
+                "a ShutdownSignalException whose reason is not a Channel.Close must never be read as a missing queue,"
+                        + " even if its reply code happens to be 404");
+    }
+
+    @Test
+    void anIOExceptionWithNoCauseAtAllIsNotAMissingQueue() {
+        IOException e = new IOException("some other declare failure, no cause attached");
+
+        assertFalse(LeadMailbox.isMissingQueue(e),
+                "an IOException with no ShutdownSignalException cause must never be read as a confirmed absence");
+    }
+
+    @Test
+    void anIOExceptionWithAnUnrelatedCauseIsNotAMissingQueue() {
+        IOException e = new IOException("wrapped something else entirely", new RuntimeException("boom"));
+
+        assertFalse(LeadMailbox.isMissingQueue(e),
+                "a cause that isn't even a ShutdownSignalException must never be read as a confirmed absence");
+    }
+}

fleetd/src/test/java/dev/ltms/fleet/msg/LeadMailboxTest.java

@@ -1,5 +1,9 @@
 package dev.ltms.fleet.msg;
 
+import com.rabbitmq.client.AMQP;
+import com.rabbitmq.client.Channel;
+import com.rabbitmq.client.Connection;
+import com.rabbitmq.client.ShutdownSignalException;
 import org.junit.jupiter.api.BeforeAll;
 import org.junit.jupiter.api.Tag;
 import org.junit.jupiter.api.Test;
@@ -7,11 +11,14 @@ import org.testcontainers.containers.RabbitMQContainer;
 import org.testcontainers.junit.jupiter.Testcontainers;
 import org.testcontainers.utility.DockerImageName;
 
+import java.io.IOException;
 import java.util.List;
 import java.util.concurrent.TimeUnit;
 import java.util.concurrent.atomic.AtomicLong;
 
 import static org.junit.jupiter.api.Assertions.assertEquals;
+import static org.junit.jupiter.api.Assertions.assertFalse;
+import static org.junit.jupiter.api.Assertions.assertInstanceOf;
 import static org.junit.jupiter.api.Assertions.assertThrows;
 import static org.junit.jupiter.api.Assertions.assertTrue;
 
@@ -85,6 +92,33 @@ class LeadMailboxTest {
         }
     }
 
+    @Test
+    void ackThrowsWhenRecoveryClearedTheHeldMessage() throws Exception {
+        String to = coordId("lead-recovery-ack");
+        try (LeadMailbox inbox = LeadMailbox.open(uri(), to)) {
+            inbox.publish(to, new LeadMessage("recovery-ack", "lead-from", to, "in flight"));
+            assertEquals(1, awaitPeek(inbox).size(), "the broker delivery must be held before recovery clears it");
+
+            inbox.clearHeldForRecovery();
+
+            assertThrows(IllegalStateException.class, () -> inbox.ack("recovery-ack"),
+                    "a cleared delivery has no valid tag, so ack must report that it did not reach the broker");
+        }
+    }
+
+    @Test
+    void ackOfAMessageAlreadyAckedOnThisConnectionStaysQuiet() throws Exception {
+        String to = coordId("lead-repeat-ack");
+        try (LeadMailbox inbox = LeadMailbox.open(uri(), to)) {
+            inbox.publish(to, new LeadMessage("repeat-ack", "lead-from", to, "once"));
+            awaitPeek(inbox);
+
+            inbox.ack("repeat-ack");
+
+            inbox.ack("repeat-ack");
+        }
+    }
+
     @Test
     void duplicateMsgIdIsNotDoubleQueued() throws Exception {
         String to = coordId("lead-dedup");
@@ -159,6 +193,145 @@ class LeadMailboxTest {
         }
     }
 
+    @Test
+    void inspectReportsAnOwnedMailboxAsExistingWithItsOwnConsumer() throws Exception {
+        // A LeadMailbox declares AND consumes its own queue the moment open() returns (see own()),
+        // so inspecting a coord-id this same process owns must always find exactly one consumer.
+        String self = coordId("lead-inspect-self");
+        try (LeadMailbox mailbox = LeadMailbox.open(uri(), self)) {
+            LeadChannel.MailboxState state = mailbox.inspect(self);
+            assertEquals(self, state.coordId());
+            assertTrue(state.exists(), "this daemon owns and has declared this exact queue");
+            assertEquals(0, state.pending(), "nothing has been published to it yet");
+            assertEquals(1, state.consumers(), "the mailbox's own constructor already attached a consumer");
+        }
+    }
+
+    @Test
+    void inspectReportsAMissingMailboxAsAbsentRatherThanThrowing() throws Exception {
+        String nobody = coordId("lead-inspect-nobody");
+        try (LeadMailbox mailbox = LeadMailbox.open(uri(), coordId("lead-inspect-caller"))) {
+            LeadChannel.MailboxState state = mailbox.inspect(nobody);
+            assertEquals(LeadChannel.MailboxState.absent(nobody), state,
+                    "a queue nobody has ever declared must report absent, never throw");
+            assertTrue(state.known(), "a confirmed 404 IS a definite answer — this is not the unknown case");
+        }
+    }
+
+    /**
+     * fleetd #361 review finding 3: {@code inspect} is specified to never throw, but the original
+     * implementation caught only {@link IOException} — and {@link Connection#createChannel()} on an
+     * already-closed connection throws {@link com.rabbitmq.client.AlreadyClosedException}, an
+     * unchecked {@link RuntimeException} (pinned by {@code
+     * createChannelOnAnAlreadyClosedConnectionThrowsAnUncheckedException} above). This drives that
+     * exact scenario through the real {@link LeadMailbox#inspect} — not the raw client call — and
+     * checks both halves of finding 1 and finding 3 at once: no exception escapes, and the result is
+     * {@code UNKNOWN} rather than the wrong-but-plausible-looking {@code ABSENT}.
+     */
+    @Test
+    void inspectReportsUnknownRatherThanThrowingWhenTheConnectionIsAlreadyClosed() throws Exception {
+        LeadMailbox mailbox = LeadMailbox.open(uri(), coordId("lead-inspect-dead-connection"));
+        mailbox.close(); // tears down the connection `inspect` will try to open a probe channel on
+
+        LeadChannel.MailboxState state = mailbox.inspect(coordId("lead-inspect-irrelevant-target"));
+
+        assertFalse(state.exists());
+        assertFalse(state.known(), "a dead connection proves nothing about the target mailbox — it must be unknown, not absent");
+        assertEquals(LeadChannel.MailboxState.Presence.UNKNOWN, state.presence());
+    }
+
+    @Test
+    void inspectReportsPendingMessagesAndZeroConsumersWhenNobodyIsReadingAnymore() throws Exception {
+        // Publish into a mailbox this test owns, then never consume from it, to prove `pending` and
+        // `consumers` really come off the broker rather than off this process's own in-memory state.
+        String to = coordId("lead-inspect-pending");
+        String observerId = coordId("lead-inspect-observer");
+        try (LeadMailbox owner = LeadMailbox.open(uri(), to);
+             LeadMailbox observer = LeadMailbox.open(uri(), observerId)) {
+            owner.publish(to, new LeadMessage("m1", "lead-from", to, "sitting in the queue"));
+            awaitPeek(owner); // make sure the broker has actually enqueued it before inspecting
+        } // `owner` closes here: its consumer disconnects, but the durable, unacked message stays queued.
+
+        try (LeadMailbox observer = LeadMailbox.open(uri(), coordId("lead-inspect-observer-2"))) {
+            // The broker requeues `owner`'s unacked delivery asynchronously once its connection drops,
+            // so poll rather than assume the very first passive declare already sees the settled state.
+            LeadChannel.MailboxState state = awaitInspect(observer, to, s -> s.consumers() == 0);
+            assertTrue(state.exists());
+            assertEquals(0, state.consumers(), "the only owner just closed — nobody is reading this anymore");
+            assertEquals(1, state.pending(), "the unacked message must be requeued, never dropped");
+        }
+    }
+
+    /**
+     * fleetd #361's central invariant, proved rather than assumed: a passive queue declare of a
+     * missing queue closes ITS channel with a 404 in AMQP 0-9-1. {@link LeadMailbox#inspect} is
+     * specified to run on its own disposable channel for exactly this reason — this test is the one
+     * that actually exercises the failure mode and shows {@link LeadMailbox#publish} on the SAME
+     * instance is unaffected by it.
+     */
+    @Test
+    void inspectingAMissingMailboxNeverBreaksPublishOnTheSameInstance() throws Exception {
+        String self = coordId("lead-invariant-self");
+        try (LeadMailbox mailbox = LeadMailbox.open(uri(), self)) {
+            // Miss on a queue that has never existed — this is exactly the 404-closes-the-channel case.
+            LeadChannel.MailboxState missed = mailbox.inspect(coordId("lead-invariant-nobody-home"));
+            assertFalse(missed.exists());
+            assertTrue(missed.known(), "a genuine 404 on a queue that never existed is a confirmed fact, not an unknown");
+
+            // publish() must still work on THIS SAME instance: if inspect() had reused `publishChannel`
+            // (or `channel`), the broker's 404 would have closed it out from underneath publish().
+            LeadMessage sent = new LeadMessage("after-miss", "lead-from", self, "still alive");
+            mailbox.publish(self, sent);
+            List<LeadMessage> got = awaitPeek(mailbox);
+            assertEquals(1, got.size(), "publish must still reach this mailbox's own queue after a missed inspect");
+            assertEquals("after-miss", got.getFirst().msgId());
+
+            // And a second inspect() — of a mailbox that DOES exist this time — must also still work,
+            // proving the miss did not wedge inspect() itself either.
+            LeadChannel.MailboxState self2 = mailbox.inspect(self);
+            assertTrue(self2.exists());
+        }
+    }
+
+    /**
+     * Pins the exact exception shape {@link LeadMailbox#inspect} relies on to tell a genuine 404
+     * (mailbox confirmed absent) apart from everything else (mailbox state unknown) — measured
+     * against a real broker rather than assumed from the AMQP 0-9-1 spec text. If this ever fails,
+     * the classification in {@code inspect} is reading the wrong shape and must be revisited.
+     */
+    @Test
+    void passiveDeclareOfAMissingQueueThrowsAnIOExceptionWrappingA404ShutdownSignal() throws Exception {
+        try (Connection conn = LeadMailbox.connectionFactory(uri()).newConnection()) {
+            Channel probe = conn.createChannel();
+            String missing = LeadMailbox.queueName(coordId("lead-404-shape"));
+            IOException thrown = assertThrows(IOException.class, () -> probe.queueDeclarePassive(missing));
+            assertInstanceOf(ShutdownSignalException.class, thrown.getCause(),
+                    () -> "expected the IOException to wrap a ShutdownSignalException, got: " + thrown);
+            ShutdownSignalException sse = (ShutdownSignalException) thrown.getCause();
+            assertInstanceOf(AMQP.Channel.Close.class, sse.getReason(),
+                    () -> "expected a Channel.Close reason: " + sse);
+            AMQP.Channel.Close close = (AMQP.Channel.Close) sse.getReason();
+            assertEquals(404, close.getReplyCode(), () -> "expected AMQP NOT_FOUND (404): " + close);
+            assertFalse(probe.isOpen(), "the 404 must have closed the channel the declare ran on");
+        }
+    }
+
+    /**
+     * The other half of the same measurement: calling {@code createChannel()} on an
+     * already-closed connection — the shape {@link LeadMailbox#inspect} hits when the broker
+     * connection itself is gone — throws {@link com.rabbitmq.client.AlreadyClosedException}, an
+     * unchecked {@link RuntimeException}, not an {@link IOException}. An {@code inspect} that only
+     * caught {@code IOException} here would let this escape instead of reporting "unknown".
+     */
+    @Test
+    void createChannelOnAnAlreadyClosedConnectionThrowsAnUncheckedException() throws Exception {
+        Connection conn = LeadMailbox.connectionFactory(uri()).newConnection();
+        conn.close();
+        RuntimeException thrown = assertThrows(RuntimeException.class, conn::createChannel);
+        assertInstanceOf(com.rabbitmq.client.AlreadyClosedException.class, thrown,
+                () -> "expected AlreadyClosedException, got: " + thrown);
+    }
+
     /** Poll peek until at least one message is held, or ~10s elapse (broker delivery is async). */
     @SuppressWarnings("BusyWait")
     private static List<LeadMessage> awaitPeek(LeadMailbox inbox) throws InterruptedException {
@@ -170,4 +343,18 @@ class LeadMailboxTest {
         }
         return msgs;
     }
+
+    /** Poll inspect(coordId) until it satisfies {@code done}, or ~10s elapse (broker state settles async). */
+    @SuppressWarnings("BusyWait")
+    private static LeadChannel.MailboxState awaitInspect(
+            LeadMailbox observer, String coordId, java.util.function.Predicate<LeadChannel.MailboxState> done)
+            throws InterruptedException {
+        long deadline = System.nanoTime() + TimeUnit.SECONDS.toNanos(10);
+        LeadChannel.MailboxState state = observer.inspect(coordId);
+        while (!done.test(state) && System.nanoTime() < deadline) {
+            Thread.sleep(50);
+            state = observer.inspect(coordId);
+        }
+        return state;
+    }
 }

fleetd/src/test/java/dev/ltms/fleet/msg/MessageServiceTest.java

@@ -479,7 +479,8 @@ class MessageServiceTest {
 
             // The worker resumes on its own (per the ask() contract) and eventually sends its real
             // fleet_reply; the async ticket must still resolve with it, not strand at PENDING.
-            assertTrue(messages.reply(T, "real result"), "the worker's real reply must still be accepted");
+            assertEquals(MessageService.ReplyOutcome.RESOLVED_ASYNC_TICKET, messages.reply(T, "real result"),
+                    "the worker's real reply must still be accepted, resolving the parked async ticket");
         } finally {
             messages.setAskTimeoutRaceHookForTest(null);
         }
@@ -767,7 +768,9 @@ class MessageServiceTest {
     @Test
     void replyQueuesInInboxWhenNoSendIsOpen() {
         // No send is open for this session — reply should queue in the inbox.
-        assertTrue(messages.reply(T, "queued-text"), "reply should succeed (queued)");
+        // fleetd #365: this is the case that must read as QUEUED, not "delivered".
+        assertEquals(MessageService.ReplyOutcome.QUEUED, messages.reply(T, "queued-text"),
+                "reply should succeed but only as queued — nothing was waiting for it");
 
         var drained = messages.drainReplies(T);
         assertEquals(1, drained.size());
@@ -780,7 +783,9 @@ class MessageServiceTest {
         awaitUninterruptibly(T);
 
         // An explicit reply resolves the open send.
-        assertTrue(messages.reply(T, "send-resolved"), "reply should succeed (resolved live send)");
+        // fleetd #365: this is the other case — RESOLVED_SEND, distinct from QUEUED above.
+        assertEquals(MessageService.ReplyOutcome.RESOLVED_SEND, messages.reply(T, "send-resolved"),
+                "reply should succeed by resolving the live waiting send");
 
         // The inbox should be empty — the reply went to the send, not the inbox.
         assertTrue(messages.drainReplies(T).isEmpty(), "no reply in the inbox");
@@ -1094,8 +1099,11 @@ class MessageServiceTest {
         assertEquals(MessageService.Outcome.TIMED_OUT_WORKING, answerReply.outcome(),
                 "the primary's own bounded wait gives up before the worker finishes resuming");
 
-        // The worker keeps working past that window and only now calls fleet_reply.
-        assertTrue(messages.reply(T, "PR opened: https://example/pulls/42"));
+        // The worker keeps working past that window and only now calls fleet_reply. The forward
+        // waiter answer() opened already timed out, so this resolves via the parked async ticket,
+        // not a live send (fleetd #365).
+        assertEquals(MessageService.ReplyOutcome.RESOLVED_ASYNC_TICKET,
+                messages.reply(T, "PR opened: https://example/pulls/42"));
 
         MessageService.TaskView done = awaitTicketPhase(ticket, MessageService.Phase.DONE);
         assertEquals("PR opened: https://example/pulls/42", done.reply(),
@@ -1119,7 +1127,10 @@ class MessageServiceTest {
         assertEquals("config.yaml", ask.get(5, TimeUnit.SECONDS).answer());
         assertEquals(MessageService.Outcome.TIMED_OUT_WORKING, answerReply.outcome());
 
-        assertTrue(messages.reply(T, "PR opened: https://example/pulls/42"));
+        // No live waiter (answer()'s own forward wait already timed out) — resolves the parked
+        // async ticket instead (fleetd #365).
+        assertEquals(MessageService.ReplyOutcome.RESOLVED_ASYNC_TICKET,
+                messages.reply(T, "PR opened: https://example/pulls/42"));
 
         // fleet_stop tears the worker's session down right after the reply landed — this must never
         // report the misleading "the worker session was released before it replied": a reply is
@@ -1170,7 +1181,9 @@ class MessageServiceTest {
         assertEquals("config.yaml", ask.get(5, TimeUnit.SECONDS).answer());
         awaitWaiting(); // answer() opened its own forward waiter for the resumed worker turn
 
-        assertTrue(messages.reply(T, "PR opened: https://example/pulls/42"));
+        // A live waiter is open (the forward wait above) — this resolves it directly (fleetd #365).
+        assertEquals(MessageService.ReplyOutcome.RESOLVED_SEND,
+                messages.reply(T, "PR opened: https://example/pulls/42"));
 
         assertEquals(MessageService.Outcome.REPLIED, answer.get(5, TimeUnit.SECONDS).outcome(),
                 "the lead's own answer() call must not throw because ask()'s timeout cleanup raced it");
@@ -1221,8 +1234,9 @@ class MessageServiceTest {
 
         // The worker keeps working past the timeout and only now calls fleet_reply — with no live
         // rendezvous waiter open (ask()'s timeout already closed it) and no new send() having
-        // reopened one for this target.
-        assertTrue(messages.reply(T, "PR opened: https://example/pulls/42"));
+        // reopened one for this target. So it resolves the parked async ticket (fleetd #365).
+        assertEquals(MessageService.ReplyOutcome.RESOLVED_ASYNC_TICKET,
+                messages.reply(T, "PR opened: https://example/pulls/42"));
 
         MessageService.TaskView done = awaitTicketPhase(ticket, MessageService.Phase.DONE);
         assertEquals("PR opened: https://example/pulls/42", done.reply(),
@@ -1279,7 +1293,10 @@ class MessageServiceTest {
         // real reply — reproduce that interleaving directly instead of trying to win a real race.
         messages.forgetTurnForTest(turnId);
 
-        assertTrue(messages.reply(T, "PR opened: https://example/pulls/42"));
+        // answer() is still waiting on its own forward waiter for the resumed turn — a live send —
+        // so this resolves it directly, not the async ticket (fleetd #365).
+        assertEquals(MessageService.ReplyOutcome.RESOLVED_SEND,
+                messages.reply(T, "PR opened: https://example/pulls/42"));
 
         assertEquals(MessageService.Outcome.REPLIED, answer.get(5, TimeUnit.SECONDS).outcome(),
                 "the primary's own answer() call must still see the worker's real reply");
@@ -1321,7 +1338,9 @@ class MessageServiceTest {
 
         messages.setReplyOrphanTurnIdRaceHookForTest(() -> messages.forgetTurnForTest(turnId));
         try {
-            assertTrue(messages.reply(T, "PR opened: https://example/pulls/42"));
+            // No live waiter — resolves the parked async ticket (fleetd #365).
+            assertEquals(MessageService.ReplyOutcome.RESOLVED_ASYNC_TICKET,
+                    messages.reply(T, "PR opened: https://example/pulls/42"));
 
             MessageService.TaskView done = awaitTicketPhase(ticket, MessageService.Phase.DONE);
             assertEquals("PR opened: https://example/pulls/42", done.reply(),
@@ -1353,7 +1372,8 @@ class MessageServiceTest {
         injectDelivery();
         assertEquals(MessageService.AskOutcome.TIMED_OUT, messages.ask(T, "Q2?", 200).outcome());
 
-        assertTrue(messages.reply(T, "which task does this answer?"));
+        // Ambiguous — two candidates, so it must fall back to the inbox rather than guess (fleetd #365).
+        assertEquals(MessageService.ReplyOutcome.QUEUED, messages.reply(T, "which task does this answer?"));
 
         assertEquals(MessageService.Phase.PENDING, messages.poll(ticket1).phase(),
                 "an ambiguous reply must not guess ticket1");
@@ -2032,7 +2052,7 @@ class MessageServiceTest {
         CompletableFuture<MessageService.Reply> send = sendAsync();
         awaitWaiting();
 
-        assertTrue(messages.reply(T, "resolved-live"));
+        assertEquals(MessageService.ReplyOutcome.RESOLVED_SEND, messages.reply(T, "resolved-live"));
         assertFalse(messages.hasStrandedReply(T), "a reply that resolved an open send is not stranded");
 
         MessageService.Reply r = send.get(5, TimeUnit.SECONDS);
@@ -2042,14 +2062,14 @@ class MessageServiceTest {
     @Test
     void hasStrandedReplyIsTrueWhenNoSendWasWaiting() {
         // No send is open for T — the reply queues into the inbox and is recorded as stranded.
-        assertTrue(messages.reply(T, "nobody was waiting"));
+        assertEquals(MessageService.ReplyOutcome.QUEUED, messages.reply(T, "nobody was waiting"));
         assertTrue(messages.hasStrandedReply(T),
                 "a reply with no open send strands, even though it is safely queued in the inbox");
     }
 
     @Test
     void hasStrandedReplyClearsOnceTheTargetsNextDeliveryIsAccepted() throws Exception {
-        assertTrue(messages.reply(T, "stray"));
+        assertEquals(MessageService.ReplyOutcome.QUEUED, messages.reply(T, "stray"));
         assertTrue(messages.hasStrandedReply(T));
 
         // The next accepted delivery for T clears the stale stranding fact — the one case the
@@ -2067,7 +2087,7 @@ class MessageServiceTest {
 
     @Test
     void hasStrandedReplyClearsOnAbandon() {
-        assertTrue(messages.reply(T, "stray"));
+        assertEquals(MessageService.ReplyOutcome.QUEUED, messages.reply(T, "stray"));
         assertTrue(messages.hasStrandedReply(T));
 
         messages.abandon(T, "session released");

fleetd/src/test/java/dev/ltms/fleet/msg/ReplyPushLoopTest.java

@@ -4,6 +4,7 @@ import com.fasterxml.jackson.databind.JsonNode;
 import com.fasterxml.jackson.databind.ObjectMapper;
 import dev.ltms.fleet.herdr.AgentControl;
 import dev.ltms.fleet.herdr.HerdrClient;
+import dev.ltms.fleet.herdr.HerdrException;
 import dev.ltms.fleet.mcp.PrimaryRegistry;
 import dev.ltms.fleet.metrics.FleetMetrics;
 import dev.ltms.fleet.metrics.Metrics;
@@ -44,6 +45,7 @@ class ReplyPushLoopTest {
     private static final String WORKER = "term_worker";
     private static final String WORKER2 = "term_worker2";
     private static final String OTHER_PRIMARY = "term_other_primary";
+    private static final String DEAD_LEAD = "term_dead_lead";
     private static final ObjectMapper MAPPER = new ObjectMapper();
 
     private PrimaryRegistry registry;
@@ -207,6 +209,101 @@ class ReplyPushLoopTest {
                 "exactly " + cap + " agent.prompt calls (cap=" + cap + ")");
     }
 
+    // --- fleetd #368: a lead's delegation binding must not outlive the lead ---------------------
+
+    /**
+     * The bug: {@code PrimaryRegistry.forgetDelegation} is wired to a worker's release, never to
+     * the delegating lead's own disappearance, so a lead that closed, crashed, or was relaunched
+     * leaves {@code leadByTarget} pointing at a terminal herdr no longer knows. Before the fix,
+     * {@code onReplyQueued} took that stale, non-null entry at face value — {@code nudgeTargetFor}
+     * only ever falls back to the pinned primary when the map holds nothing for the target — so
+     * the nudge's only schedule ran against the dead terminal forever and the live primary never
+     * heard about the reply through this path.
+     *
+     * <p>This drives {@link ReplyPushLoop#onReplyQueued(String)} itself (not {@code PrimaryRegistry}
+     * directly), because the registry lookup was never the defect — the caller trusting it without
+     * checking liveness was. A test that only asserted on {@code PrimaryRegistry.nudgeTargetFor}
+     * would pass whether or not {@code ReplyPushLoop} ever adopted the fix.
+     */
+    @Test
+    void aStaleLeadBindingFallsBackToTheLiveLeadInsteadOfNudgingADeadTerminal() throws Exception {
+        // PRIMARY is the single known (pinned) lead — set up in @BeforeEach via `registry`.
+        // DEAD_LEAD is a second lead that once delegated to WORKER and is now gone: herdr reports
+        // agent_not_found for it, exactly as it would for a closed/crashed/relaunched terminal.
+        registry.recordDelegation(WORKER, DEAD_LEAD);
+
+        var rec = new DeadLeadHerdrClient(DEAD_LEAD);
+        agents = new AgentControl(rec);
+        inbox.publish(WORKER, "m1", "hello");
+
+        loop(1, 50).onReplyQueued(WORKER);
+
+        assertTrue(rec.sendLatch.await(3, TimeUnit.SECONDS),
+                "the nudge should still reach the live primary, not silently vanish with the dead lead");
+        assertEquals(List.of(PRIMARY), rec.promptTargets(),
+                "the nudge must be sent to the live primary, never to the dead lead's terminal");
+        assertEquals(PRIMARY, registry.nudgeTargetFor(WORKER).orElseThrow(),
+                "the stale binding must be forgotten (self-healed) once found dead, exactly like "
+                        + "AgentControl.paneByTerminal already does on agent_not_found");
+    }
+
+    /**
+     * Same dead binding, but with no pinned primary to fall back to (the multi-lead, no-fallback
+     * case {@code PrimaryRegistry.nudgeTargetFor}'s own javadoc already covers): the loop must
+     * never nudge the dead terminal, and must not spin — no schedule starts at all once the stale
+     * binding resolves to empty, same as if the map had never held an entry for this target.
+     */
+    @Test
+    void aStaleLeadBindingWithNoFallbackNeverNudgesTheDeadTerminal() throws Exception {
+        var unpinned = new PrimaryRegistry(null);
+        unpinned.recordDelegation(WORKER, DEAD_LEAD);
+
+        var rec = new DeadLeadHerdrClient(DEAD_LEAD);
+        agents = new AgentControl(rec);
+        inbox.publish(WORKER, "m1", "hello");
+
+        var loop = new ReplyPushLoop(unpinned, agents, inbox, scheduler, 1, 50);
+        loop.onReplyQueued(WORKER);
+
+        Thread.sleep(200);
+        assertEquals(0, rec.sendCount(), "no lead is live to nudge, so nothing should ever be sent");
+        assertTrue(unpinned.nudgeTargetFor(WORKER).isEmpty(),
+                "the stale binding must be forgotten even when there is no fallback to hand back");
+    }
+
+    /**
+     * fleetd #368 review, must-fix: the first version of {@code isLive} treated <em>any</em>
+     * {@code RuntimeException} from the liveness probe as "the lead is gone" — indistinguishable
+     * from a transient herdr hiccup (a socket blip, a decode error) on a lead that is actually
+     * still live. The consequence of that misdiagnosis is destructive and permanent
+     * ({@code forgetDelegation}), which is the exact #359 mistake repeated two days later: a single
+     * bad reading must never destroy a live binding. This pins the narrower rule — only an
+     * affirmative {@code agent_not_found} may forget a binding; a merely inconclusive failure must
+     * leave the binding alone, and the lead must still be nudged once the probe recovers.
+     */
+    @Test
+    void aTransientLivenessFailureMustNotForgetABindingToAStillLiveLead() throws Exception {
+        // OTHER_PRIMARY is delegated to and genuinely live — its FIRST agent.get call fails with a
+        // transient, non-agent_not_found HerdrException (a transport-level failure, code null,
+        // exactly what a socket blip looks like), then succeeds on every call after.
+        registry.recordDelegation(WORKER, OTHER_PRIMARY);
+
+        var rec = new FlakyThenLiveHerdrClient(OTHER_PRIMARY);
+        agents = new AgentControl(rec);
+        inbox.publish(WORKER, "m1", "hello");
+
+        loop(2, 50).onReplyQueued(WORKER);
+
+        assertTrue(rec.sendLatch.await(3, TimeUnit.SECONDS),
+                "the nudge must still reach the live lead once the transient failure clears");
+        assertEquals(List.of(OTHER_PRIMARY), rec.promptTargets(),
+                "the nudge must go to the lead that was only transiently unreachable, not the "
+                        + "unrelated pinned primary");
+        assertEquals(OTHER_PRIMARY, registry.nudgeTargetFor(WORKER).orElseThrow(),
+                "a merely transient failure must not forget the binding to a lead that is actually "
+                        + "still live");
+    }
+
     // --- nudge format --------------------------------------------------------------------------
 
     @Test
@@ -887,7 +984,7 @@ class ReplyPushLoopTest {
     // --- metrics (CB-512) ----------------------------------------------------------------------
 
     @Test
-    void successfulNudgeIncrementsDelivered() throws Exception {
+    void successfulNudgeIncrementsSent() throws Exception {
         var rec = recordingClient();
         agents = new AgentControl(rec);
         inbox.publish(WORKER, "m1", "hello");
@@ -897,11 +994,13 @@ class ReplyPushLoopTest {
 
         assertTrue(rec.sendLatch.await(3, TimeUnit.SECONDS),
                 "one nudge (1 agent.prompt call) should have been sent");
-        // The delivered count is bumped on the scheduler thread right after the send that releases
+        // The sent count is bumped on the scheduler thread right after the send that releases
         // the latch — settle briefly so the counter is published before we read it.
         Thread.sleep(200);
-        assertEquals(1, metrics.count(FleetMetrics.PUSH_NUDGES, "outcome", "delivered"),
-                "a successfully sent nudge must count as delivered");
+        // fleetd #365: "sent", not "delivered" — this only proves the herdr call succeeded, not
+        // that the primary's pane read it.
+        assertEquals(1, metrics.count(FleetMetrics.PUSH_NUDGES, "outcome", "sent"),
+                "a successfully sent nudge must count as sent");
     }
 
     @Test
@@ -916,11 +1015,11 @@ class ReplyPushLoopTest {
 
         assertEquals(1, metrics.count(FleetMetrics.PUSH_NUDGES, "outcome", "exhausted"),
                 "hitting the reminder cap must count as exhausted");
-        assertEquals(0, metrics.count(FleetMetrics.PUSH_NUDGES, "outcome", "delivered"));
+        assertEquals(0, metrics.count(FleetMetrics.PUSH_NUDGES, "outcome", "sent"));
     }
 
     @Test
-    void successfulTicketNudgeIncrementsDelivered() throws Exception {
+    void successfulTicketNudgeIncrementsSent() throws Exception {
         var rec = recordingClient();
         agents = new AgentControl(rec);
         Metrics metrics = new Metrics();
@@ -929,8 +1028,8 @@ class ReplyPushLoopTest {
 
         assertTrue(rec.sendLatch.await(3, TimeUnit.SECONDS), "one ticket nudge should have been sent");
         Thread.sleep(200);
-        assertEquals(1, metrics.count(FleetMetrics.PUSH_NUDGES, "outcome", "delivered"),
-                "a successfully sent ticket nudge must count as delivered, same metric as CB-307");
+        assertEquals(1, metrics.count(FleetMetrics.PUSH_NUDGES, "outcome", "sent"),
+                "a successfully sent ticket nudge must count as sent, same metric as CB-307");
     }
 
     @Test
@@ -1098,4 +1197,101 @@ class ReplyPushLoopTest {
         public void close() {
         }
     }
+
+    /**
+     * Fake herdr client for fleetd #368: {@code deadTarget} is a terminal herdr genuinely no
+     * longer knows about — {@code agent.get} fails with {@code agent_not_found} exactly as
+     * {@code AgentControl.agentCall} expects for a real dead/closed pane (see its javadoc). Every
+     * other target reports {@code idle} (injectable). Records the {@code target} named by every
+     * {@code agent.prompt} call, so a test can prove which terminal actually got nudged.
+     */
+    private static final class DeadLeadHerdrClient implements HerdrClient {
+        private final String deadTarget;
+        private final List<String> promptTargets = Collections.synchronizedList(new ArrayList<>());
+        volatile CountDownLatch sendLatch = new CountDownLatch(1);
+
+        DeadLeadHerdrClient(String deadTarget) {
+            this.deadTarget = deadTarget;
+        }
+
+        @Override
+        @SuppressWarnings("unchecked")
+        public JsonNode call(String method, Object params) {
+            Map<String, Object> p = params instanceof Map ? (Map<String, Object>) params : Map.of();
+            if ("agent.get".equals(method)) {
+                String target = String.valueOf(p.get("target"));
+                if (deadTarget.equals(target)) {
+                    throw new HerdrException("no such agent: " + target, "agent_not_found", null);
+                }
+                return MAPPER.createObjectNode()
+                        .set("agent", MAPPER.createObjectNode()
+                                .put("terminal_id", target)
+                                .put("agent_status", "idle"));
+            }
+            if ("agent.prompt".equals(method)) {
+                promptTargets.add(String.valueOf(p.get("target")));
+                sendLatch.countDown();
+            }
+            return MAPPER.createObjectNode();
+        }
+
+        List<String> promptTargets() {
+            return List.copyOf(promptTargets);
+        }
+
+        long sendCount() {
+            return promptTargets.size();
+        }
+
+        @Override
+        public void close() {
+        }
+    }
+
+    /**
+     * Fake herdr client for fleetd #368 review: {@code flakyTarget}'s FIRST {@code agent.get} call
+     * fails with a transient, non-{@code agent_not_found} {@code HerdrException} — a transport-level
+     * failure (code {@code null}), exactly what a socket blip or a decode error on a perfectly live
+     * lead looks like — then succeeds ({@code idle}) on every call after. Used to prove a merely
+     * inconclusive failure must not be treated as the lead being gone.
+     */
+    private static final class FlakyThenLiveHerdrClient implements HerdrClient {
+        private final String flakyTarget;
+        private final AtomicInteger getCalls = new AtomicInteger();
+        private final List<String> promptTargets = Collections.synchronizedList(new ArrayList<>());
+        volatile CountDownLatch sendLatch = new CountDownLatch(1);
+
+        FlakyThenLiveHerdrClient(String flakyTarget) {
+            this.flakyTarget = flakyTarget;
+        }
+
+        @Override
+        @SuppressWarnings("unchecked")
+        public JsonNode call(String method, Object params) {
+            Map<String, Object> p = params instanceof Map ? (Map<String, Object>) params : Map.of();
+            if ("agent.get".equals(method)) {
+                String target = String.valueOf(p.get("target"));
+                if (flakyTarget.equals(target) && getCalls.getAndIncrement() == 0) {
+                    throw new HerdrException("herdr socket read timed out"); // transport failure, code == null
+                }
+                return MAPPER.createObjectNode()
+                        .set("agent", MAPPER.createObjectNode()
+                                .put("terminal_id", target)
+                                .put("agent_status", "idle"));
+            }
+            if ("agent.prompt".equals(method)) {
+                promptTargets.add(String.valueOf(p.get("target")));
+                sendLatch.countDown();
+            }
+            return MAPPER.createObjectNode();
+        }
+
+        List<String> promptTargets() {
+            return List.copyOf(promptTargets);
+        }
+
+        @Override
+        public void close() {
+        }
+    }
 }

fleetd/src/test/java/dev/ltms/fleet/peer/SpawnRequestWithProfilePreservesEveryComponentTest.java

@@ -0,0 +1,144 @@
+package dev.ltms.fleet.peer;
+
+import org.junit.jupiter.api.Test;
+
+import java.lang.reflect.Constructor;
+import java.lang.reflect.RecordComponent;
+import java.util.ArrayList;
+import java.util.Arrays;
+import java.util.LinkedHashMap;
+import java.util.List;
+import java.util.Locale;
+import java.util.Map;
+import java.util.Objects;
+import java.util.Set;
+import java.util.TreeSet;
+
+import static org.junit.jupiter.api.Assertions.assertEquals;
+
+/**
+ * Fleetd #382, the same "defect factory" #357 and #358 guarded on {@code FleetConfig.withDefaults()}
+ * and {@link dev.ltms.fleet.session.MemberSession}'s rebuild sites — reproduced here on
+ * {@link SpawnRequest#withProfile(String)}.
+ *
+ * <p>{@code SpawnRequest} has back-compat constructors at arity 3 and 5 alongside its canonical
+ * arity-6 constructor. Before this ticket, {@code CompositePeerLauncher} routed a profile by
+ * building a fresh {@code SpawnRequest} from a literal {@code new SpawnRequest(...)} call listing
+ * six of the original request's own accessors. That call is only correct because it happens to
+ * name exactly six arguments today — add a 7th component and the established back-compat pattern
+ * (a new constructor at the old, now-shorter arity) and a call one argument short of the new
+ * canonical arity would silently rebind to that back-compat constructor, dropping the new
+ * component on every profile-routed spawn without any compile error. {@link #withProfile} replaces
+ * that literal call, so this test guards the ONE rebuild site instead of a call site scattered
+ * through a launcher.
+ *
+ * <p>The check below builds a {@link SpawnRequest} through the TRUE canonical constructor —
+ * resolved by the record's own component types via {@code getDeclaredConstructor}, never by
+ * argument count, so it can never itself land on a back-compat overload — with a real, distinctive,
+ * non-null value in every component, calls {@link SpawnRequest#withProfile(String)}, and asserts
+ * every component the method is not documented to change survives unchanged, while {@code
+ * profileName} comes back as the new value it was given. A component that comes back anything else
+ * was silently dropped — the shape of the defect this test exists to catch.
+ *
+ * <p>{@link #EXCLUDED_FROM_SURVIVAL_CHECK} is kept deliberately empty and size-pinned by
+ * {@link #exclusionListSizeIsPinned()}, for the same reason the other two guards pin theirs at
+ * zero: a checker whose escape hatch can grow to silence a failure is not a checker. Every one of
+ * {@link SpawnRequest}'s 6 current components has a real, non-null value here and none is excluded.
+ */
+class SpawnRequestWithProfilePreservesEveryComponentTest {
+
+    private static final RecordComponent[] COMPONENTS = SpawnRequest.class.getRecordComponents();
+
+    /** Deliberately empty today; grow it only with a matching justification, and re-pin the size. */
+    private static final Set<String> EXCLUDED_FROM_SURVIVAL_CHECK = Set.of();
+
+    /** One real, distinctive, non-null value per component — none of the 6 is excluded. */
+    private static Map<String, Object> baseValues() {
+        Map<String, Object> v = new LinkedHashMap<>();
+        v.put("profileName", "profile-guard");
+        v.put("requestedCwd", "/wt/requested-guard");
+        v.put("callerCwd", "/wt/caller-guard");
+        v.put("sessionName", "session-guard");
+        v.put("resumeSessionId", "resume-guard");
+        v.put("role", MemberRole.REVIEWER);
+        assertNamesMatchComponents(v);
+        return v;
+    }
+
+    /**
+     * Guards {@link #baseValues()} itself against drifting from the record's real shape — forgetting
+     * to add a new component here fails this assertion by name, rather than silently checking one
+     * component fewer than the record has.
+     */
+    private static void assertNamesMatchComponents(Map<String, Object> values) {
+        Set<String> names = new TreeSet<>();
+        for (RecordComponent rc : COMPONENTS) {
+            names.add(rc.getName());
+        }
+        assertEquals(names, new TreeSet<>(values.keySet()),
+                "this test's value map has drifted from SpawnRequest's actual components — "
+                        + "update baseValues() alongside the record");
+    }
+
+    /**
+     * Builds a {@link SpawnRequest} through the TRUE canonical constructor — resolved by the
+     * record's own component types, not by argument count — so this never accidentally exercises a
+     * back-compat overload the way a literal {@code new SpawnRequest(...)} call risks doing.
+     */
+    private static SpawnRequest requestOf(Map<String, Object> values) throws ReflectiveOperationException {
+        Class<?>[] types = Arrays.stream(COMPONENTS).map(RecordComponent::getType).toArray(Class<?>[]::new);
+        Object[] args = Arrays.stream(COMPONENTS).map(rc -> values.get(rc.getName())).toArray();
+        Constructor<SpawnRequest> ctor = SpawnRequest.class.getDeclaredConstructor(types);
+        return ctor.newInstance(args);
+    }
+
+    @Test
+    void exclusionListSizeIsPinned() {
+        assertEquals(0, EXCLUDED_FROM_SURVIVAL_CHECK.size(),
+                "EXCLUDED_FROM_SURVIVAL_CHECK grew from 0 — every entry needs a justification in "
+                        + "this test class's javadoc AND this assertion re-pinned to the new size; a "
+                        + "growing exclusion list that silences failures on its own is not a guard");
+    }
+
+    @Test
+    void withProfilePreservesEveryOtherComponent() throws ReflectiveOperationException {
+        Map<String, Object> base = baseValues();
+        SpawnRequest request = requestOf(base);
+        SpawnRequest result = request.withProfile("profile-updated");
+
+        Map<String, Object> expectedOverrides = Map.of("profileName", "profile-updated");
+
+        List<String> dropped = new ArrayList<>();
+        int checked = 0;
+        for (RecordComponent rc : COMPONENTS) {
+            String name = rc.getName();
+            if (EXCLUDED_FROM_SURVIVAL_CHECK.contains(name)) {
+                continue;
+            }
+            checked++;
+            Object expected = expectedOverrides.containsKey(name) ? expectedOverrides.get(name) : base.get(name);
+            Object actual;
+            try {
+                actual = rc.getAccessor().invoke(result);
+            } catch (ReflectiveOperationException e) {
+                throw new RuntimeException("failed to read SpawnRequest." + name + "()", e);
+            }
+            if (!Objects.equals(expected, actual)) {
+                dropped.add(String.format(Locale.ROOT,
+                        "%s: withProfile() was expected to carry (%s) for '%s' but returned %s — a "
+                                + "component silently dropped by withProfile(), the shape of the defect "
+                                + "this test exists to catch (its final \"return new SpawnRequest(...)\" "
+                                + "call binding to a back-compat constructor instead of the true "
+                                + "canonical one)",
+                        name, expected, name, actual));
+            }
+        }
+
+        System.out.printf(Locale.ROOT,
+                "SpawnRequest.withProfile() component-survival coverage — %d components, %d checked, "
+                        + "%d excluded, %d survived%n",
+                COMPONENTS.length, checked, EXCLUDED_FROM_SURVIVAL_CHECK.size(), checked - dropped.size());
+        assertEquals(List.of(), dropped,
+                "withProfile() silently dropped these components: " + dropped);
+    }
+}

fleetd/src/test/java/dev/ltms/fleet/power/CaffeinateSleepAssertionMechanismTest.java

@@ -0,0 +1,54 @@
+package dev.ltms.fleet.power;
+
+import org.junit.jupiter.api.Test;
+
+import static org.junit.jupiter.api.Assertions.assertEquals;
+import static org.junit.jupiter.api.Assertions.assertFalse;
+import static org.junit.jupiter.api.Assertions.assertTrue;
+
+/**
+ * Platform-detection unit tests for {@link CaffeinateSleepAssertionMechanism}.
+ *
+ * <p>This deliberately never calls {@link CaffeinateSleepAssertionMechanism#acquire()} itself —
+ * doing so on a real macOS machine would actually start a live {@code caffeinate} child and hold
+ * a real idle-sleep assertion, which the ticket this class exists for explicitly forbids testing
+ * with. Instead this exercises the pure {@code isSupportedPlatform(String)} predicate that
+ * {@code acquire()} consults before ever touching {@link ProcessBuilder} — so it proves the
+ * platform check itself is correct on any CI OS, but it does <strong>not</strong> prove that a
+ * real {@code caffeinate -i} spawn succeeds or that its child is torn down correctly; that half is
+ * exercised indirectly by {@link IdleSleepGuardTest} against a {@link FakeSleepAssertionMechanism}
+ * instead, which is the seam invariant 2/3 in the ticket call for.
+ */
+class CaffeinateSleepAssertionMechanismTest {
+
+    @Test
+    void macOsNamesAreSupported() {
+        assertTrue(CaffeinateSleepAssertionMechanism.isSupportedPlatform("Mac OS X"));
+        assertTrue(CaffeinateSleepAssertionMechanism.isSupportedPlatform("macOS"));
+        assertTrue(CaffeinateSleepAssertionMechanism.isSupportedPlatform("MAC OS X"));
+    }
+
+    @Test
+    void nonMacNamesAreNotSupported() {
+        assertFalse(CaffeinateSleepAssertionMechanism.isSupportedPlatform("Linux"));
+        assertFalse(CaffeinateSleepAssertionMechanism.isSupportedPlatform("Windows 11"));
+    }
+
+    @Test
+    void nullOsNameIsNotSupported() {
+        assertFalse(CaffeinateSleepAssertionMechanism.isSupportedPlatform(null));
+    }
+
+    /**
+     * The overload {@code isSupportedPlatform()} (no args) reads the JVM's real {@code os.name} —
+     * proves the wiring is live, without asserting a specific answer (this suite itself must pass
+     * on both macOS and Linux CI).
+     */
+    @Test
+    void noArgOverloadReadsRealSystemProperty() {
+        boolean expected = CaffeinateSleepAssertionMechanism
+                .isSupportedPlatform(System.getProperty("os.name"));
+        boolean actual = CaffeinateSleepAssertionMechanism.isSupportedPlatform();
+        assertEquals(expected, actual);
+    }
+}

fleetd/src/test/java/dev/ltms/fleet/power/FakeSleepAssertionMechanism.java

@@ -0,0 +1,56 @@
+package dev.ltms.fleet.power;
+
+import java.util.concurrent.CopyOnWriteArrayList;
+import java.util.concurrent.atomic.AtomicInteger;
+
+/**
+ * Recording fake {@link SleepAssertionMechanism} — the seam behind the real OS effect (a live
+ * {@code caffeinate} child process). No test in this package ever spawns that real process; every
+ * assertion here is against this fake's own call log instead.
+ *
+ * <p>Each acquired {@link FakeAssertion} records its own {@code close()} calls, and every
+ * acquired instance is kept in {@link #acquired} so a test can inspect all of them, including
+ * ones {@link IdleSleepGuard} has already released.
+ */
+final class FakeSleepAssertionMechanism implements SleepAssertionMechanism {
+
+    /** Every {@link FakeAssertion} this mechanism has ever handed out, in order. */
+    final CopyOnWriteArrayList<FakeAssertion> acquired = new CopyOnWriteArrayList<>();
+
+    private final AtomicInteger acquireCalls = new AtomicInteger();
+    private volatile boolean unavailable = false;
+
+    /** Make the next (and every subsequent) {@link #acquire()} return {@code null}, like a missing tool. */
+    void makeUnavailable() {
+        unavailable = true;
+    }
+
+    int acquireCallCount() {
+        return acquireCalls.get();
+    }
+
+    @Override
+    public SleepAssertion acquire() {
+        acquireCalls.incrementAndGet();
+        if (unavailable) {
+            return null;
+        }
+        FakeAssertion a = new FakeAssertion();
+        acquired.add(a);
+        return a;
+    }
+
+    /** A held fake assertion; records how many times {@code close()} was actually called. */
+    static final class FakeAssertion implements SleepAssertion {
+        private final AtomicInteger closeCalls = new AtomicInteger();
+
+        int closeCallCount() {
+            return closeCalls.get();
+        }
+
+        @Override
+        public void close() {
+            closeCalls.incrementAndGet();
+        }
+    }
+}

fleetd/src/test/java/dev/ltms/fleet/power/IdleSleepGuardTest.java

@@ -0,0 +1,118 @@
+package dev.ltms.fleet.power;
+
+import org.junit.jupiter.api.Test;
+
+import java.util.concurrent.atomic.AtomicInteger;
+
+import static org.junit.jupiter.api.Assertions.assertEquals;
+import static org.junit.jupiter.api.Assertions.assertFalse;
+import static org.junit.jupiter.api.Assertions.assertTrue;
+
+/**
+ * {@link IdleSleepGuard} against a {@link FakeSleepAssertionMechanism} — the seam that stands in
+ * for a real {@code caffeinate} child process. No test in this class ever spawns a real OS
+ * process or asserts against real idle sleep; every assertion is against the fake's call log
+ * (how many times {@code acquire()}/{@code close()} were actually called). That proves the
+ * <em>orchestration</em> — when the guard decides to hold or release an assertion, and that it
+ * never throws — but it does <strong>not</strong> prove that {@code caffeinate -i} itself
+ * actually stops macOS from idle-sleeping; that half is outside what a unit test can safely
+ * exercise (see {@link CaffeinateSleepAssertionMechanismTest}'s class doc).
+ */
+class IdleSleepGuardTest {
+
+    @Test
+    void acquiresOnZeroToOneAndReleasesOnOneToZero() {
+        FakeSleepAssertionMechanism mechanism = new FakeSleepAssertionMechanism();
+        AtomicInteger liveCount = new AtomicInteger(0);
+        IdleSleepGuard guard = new IdleSleepGuard(mechanism, liveCount::get);
+
+        assertFalse(guard.isHeld(), "nothing held before any member is live");
+
+        liveCount.set(1);
+        guard.recheck();
+        assertTrue(guard.isHeld(), "an assertion must be held once a member is live");
+        assertEquals(1, mechanism.acquired.size());
+        assertEquals(0, mechanism.acquired.get(0).closeCallCount());
+
+        liveCount.set(0);
+        guard.recheck();
+        assertFalse(guard.isHeld(), "the assertion must be released once the last member goes");
+        assertEquals(1, mechanism.acquired.get(0).closeCallCount(), "the SAME held assertion must be closed");
+    }
+
+    @Test
+    void steadyLiveCountDoesNotReacquireOrRerelease() {
+        FakeSleepAssertionMechanism mechanism = new FakeSleepAssertionMechanism();
+        AtomicInteger liveCount = new AtomicInteger(2);
+        IdleSleepGuard guard = new IdleSleepGuard(mechanism, liveCount::get);
+
+        guard.recheck(); // 0 -> 2 crossing: acquires
+        guard.recheck(); // still 2: must be a no-op
+        guard.recheck(); // still 2: must be a no-op
+        assertEquals(1, mechanism.acquireCallCount(), "only the crossing touches the mechanism");
+
+        liveCount.set(1); // 2 -> 1: still > 0, still a no-op
+        guard.recheck();
+        assertTrue(guard.isHeld());
+        assertEquals(0, mechanism.acquired.get(0).closeCallCount());
+        assertEquals(1, mechanism.acquireCallCount());
+    }
+
+    /**
+     * Invariant 2: a missing/unavailable mechanism must never throw, and the guard must simply
+     * hold nothing. {@link FakeSleepAssertionMechanism#makeUnavailable()} makes {@code acquire()}
+     * return {@code null}, exactly like {@link CaffeinateSleepAssertionMechanism} does off macOS
+     * or when the {@code caffeinate} binary is missing.
+     */
+    @Test
+    void unavailableMechanismNeverThrowsAndHoldsNothing() {
+        FakeSleepAssertionMechanism mechanism = new FakeSleepAssertionMechanism();
+        mechanism.makeUnavailable();
+        AtomicInteger liveCount = new AtomicInteger(1);
+        IdleSleepGuard guard = new IdleSleepGuard(mechanism, liveCount::get);
+
+        guard.recheck(); // must not throw
+        assertFalse(guard.isHeld(), "acquire() returned null, so nothing is held");
+        assertEquals(1, mechanism.acquireCallCount());
+
+        // still must not throw or leak on release, even though nothing was ever actually held
+        liveCount.set(0);
+        guard.recheck();
+        assertFalse(guard.isHeld());
+
+        guard.close(); // teardown with nothing held must also be a safe no-op
+    }
+
+    /**
+     * Invariant 3 (teardown). This is the test the mutation testing step removes the production
+     * release call to fail: with {@code releaseHeldLocked()} not invoked from {@link
+     * IdleSleepGuard#close()}, the held fake assertion's {@code close()} would never be called and
+     * this assertion would fail.
+     */
+    @Test
+    void closeReleasesAHeldAssertionEvenWithoutAZeroCrossing() {
+        FakeSleepAssertionMechanism mechanism = new FakeSleepAssertionMechanism();
+        AtomicInteger liveCount = new AtomicInteger(1);
+        IdleSleepGuard guard = new IdleSleepGuard(mechanism, liveCount::get);
+
+        guard.recheck();
+        assertTrue(guard.isHeld());
+
+        guard.close();
+
+        assertFalse(guard.isHeld(), "close() must release whatever is held, independent of live count");
+        assertEquals(1, mechanism.acquired.get(0).closeCallCount());
+    }
+
+    @Test
+    void closeIsIdempotent() {
+        FakeSleepAssertionMechanism mechanism = new FakeSleepAssertionMechanism();
+        AtomicInteger liveCount = new AtomicInteger(1);
+        IdleSleepGuard guard = new IdleSleepGuard(mechanism, liveCount::get);
+
+        guard.recheck();
+        guard.close();
+        guard.close(); // must not throw, must not double-release
+        assertEquals(1, mechanism.acquired.get(0).closeCallCount());
+    }
+}

fleetd/src/test/java/dev/ltms/fleet/power/IdleSleepGuardWiringTest.java

@@ -0,0 +1,72 @@
+package dev.ltms.fleet.power;
+
+import dev.ltms.fleet.config.FleetConfig;
+import dev.ltms.fleet.guard.SubscriptionGuard;
+import dev.ltms.fleet.herdr.AgentControl;
+import dev.ltms.fleet.herdr.FakeHerdr;
+import dev.ltms.fleet.herdr.WorkspaceControl;
+import dev.ltms.fleet.member.ClaudeCodeLauncher;
+import dev.ltms.fleet.session.MemberSession;
+import dev.ltms.fleet.session.SessionManager;
+import org.junit.jupiter.api.Test;
+
+import java.util.List;
+import java.util.Map;
+import java.util.Set;
+
+import static org.junit.jupiter.api.Assertions.assertEquals;
+import static org.junit.jupiter.api.Assertions.assertFalse;
+import static org.junit.jupiter.api.Assertions.assertTrue;
+
+/**
+ * Proves the wiring {@code Fleetd.main} actually performs — {@code
+ * sessions.onAcquire(_ -> guard.recheck())} / {@code sessions.onRelease(_ -> guard.recheck())} —
+ * not just {@link IdleSleepGuard}'s own orchestration logic in isolation
+ * ({@link IdleSleepGuardTest} already covers that in isolation, which on its own would not catch
+ * a wiring gap — e.g. an {@code onAcquire} call typo'd to a no-op lambda, or the listener wired to
+ * the wrong SessionManager instance — see fleetd's own "a test on the seam does not prove the
+ * caller" lesson). This test builds a real {@link SessionManager} exactly as
+ * {@code SessionManagerTest} does (a {@link FakeHerdr}-backed {@link ClaudeCodeLauncher}, no live
+ * herdr process), wires it to an {@link IdleSleepGuard} the same two lines {@code Fleetd.main}
+ * uses, and drives real {@link SessionManager#acquire} / {@link SessionManager#release} calls.
+ */
+class IdleSleepGuardWiringTest {
+
+    private SessionManager sessionManager(FakeHerdr herdr) {
+        FleetConfig.Profile cfg = new FleetConfig.Profile(
+                "ltms-local", "http://gx00.gw:8000", "coder", null, "FLEETD_WORKER_TOKEN",
+                List.of("ccs", "ltms-local"), "tab", "fleetd-workers",
+                "worker: {profile} #{n}", null, null, null);
+        ClaudeCodeLauncher workers = new ClaudeCodeLauncher(new AgentControl(herdr), new WorkspaceControl(herdr),
+                new SubscriptionGuard(Set.of("gx00.gw")), Map.of(cfg.profile(), cfg), cfg.profile(), _ -> null);
+        return new SessionManager(workers);
+    }
+
+    @Test
+    void acquiringAndReleasingRealSessionsDrivesTheGuardThroughTheSameWiringFleetdUses() {
+        FakeHerdr herdr = new FakeHerdr();
+        SessionManager sessions = sessionManager(herdr);
+        FakeSleepAssertionMechanism mechanism = new FakeSleepAssertionMechanism();
+        IdleSleepGuard guard = new IdleSleepGuard(mechanism, sessions::size);
+
+        // The exact two lines Fleetd.main wires up.
+        sessions.onAcquire(_ -> guard.recheck());
+        sessions.onRelease(_ -> guard.recheck());
+
+        assertFalse(guard.isHeld(), "no member yet: nothing held");
+
+        MemberSession a = sessions.acquire("ltms-local", "/a", "/caller", "ownerA");
+        assertTrue(guard.isHeld(), "0 -> 1: the first live member must arm the guard");
+
+        MemberSession b = sessions.acquire("ltms-local", "/b", "/caller", "ownerB");
+        assertEquals(1, mechanism.acquireCallCount(), "2nd member: still just 1 live-to-2 step, no new acquire");
+
+        sessions.release(a.paneId());
+        assertTrue(guard.isHeld(), "one member still live: the guard must stay armed");
+        assertEquals(0, mechanism.acquired.get(0).closeCallCount());
+
+        sessions.release(b.paneId());
+        assertFalse(guard.isHeld(), "1 -> 0: the last member releasing must disarm the guard");
+        assertEquals(1, mechanism.acquired.get(0).closeCallCount());
+    }
+}

fleetd/src/test/java/dev/ltms/fleet/rest/FleetAppTest.java

@@ -476,6 +476,11 @@ class FleetAppTest {
         Thread.sleep(200);
         HttpResponse<String> reply = postJson(port, "/sessions/term_a/reply", "{\"content\":\"LGTM ship it\"}");
         assertEquals(200, reply.statusCode());
+        // fleetd #365: "delivered" used to be unconditionally true; a live send was actually waiting
+        // here, so this is the case where it must genuinely read true, with outcome naming why.
+        JsonNode replyBody = mapper.readTree(reply.body());
+        assertEquals(true, replyBody.get("delivered").asBoolean());
+        assertEquals("resolved_send", replyBody.get("outcome").asText());
 
         HttpResponse<String> res = send.get(6, java.util.concurrent.TimeUnit.SECONDS);
         assertEquals(200, res.statusCode());
@@ -527,6 +532,11 @@ class FleetAppTest {
         int port = startHealthy();
         HttpResponse<String> res = postJson(port, "/sessions/term_a/reply", "{\"content\":\"orphan\"}");
         assertEquals(200, res.statusCode());
+        // fleetd #365: nothing was waiting, so "delivered" must now read false, not the old
+        // unconditional true — outcome names this as queued.
+        JsonNode resBody = mapper.readTree(res.body());
+        assertEquals(false, resBody.get("delivered").asBoolean());
+        assertEquals("queued", resBody.get("outcome").asText());
 
         // The queued reply is drainable.
         HttpResponse<String> drain = req(port, "GET", "/sessions/term_a/replies");

fleetd/src/test/java/dev/ltms/fleet/session/GitWorktreesTest.java

@@ -12,6 +12,7 @@ import org.junit.jupiter.api.Test;
 import org.junit.jupiter.api.io.TempDir;
 import org.slf4j.LoggerFactory;
 
+import java.io.IOException;
 import java.nio.charset.StandardCharsets;
 import java.nio.file.Files;
 import java.nio.file.Path;
@@ -53,6 +54,56 @@ class GitWorktreesTest {
     /** A non-empty autoenv file — the form that would prompt for authorization in a worktree. */
     private static final String AUTOENV_WITH_DIRECTIVE = "export HELLO=world\n";
 
+    /**
+     * fleetd #369. A throwaway directory that lives for the whole class (JUnit 5.4+ supports a
+     * static {@code @TempDir} field, created once and removed once every test in this class has
+     * run) — backing every raw {@code git} subprocess's {@code XDG_CONFIG_HOME} below. It only
+     * ever needs to exist and be guaranteed free of a {@code git/ignore} file; nothing writes
+     * inside it.
+     */
+    @TempDir
+    private static Path CLASS_TMP;
+
+    /**
+     * fleetd #369 — the leak measured: {@code XDG_CONFIG_HOME=<dir with a `*` git/ignore> mvn test
+     * -Dtest=GitWorktreesTest} failed 56 of 59 tests on an unpatched checkout, because {@link
+     * #gitOutput} set {@code GIT_CONFIG_GLOBAL}/{@code GIT_CONFIG_SYSTEM}/{@code
+     * GIT_TERMINAL_PROMPT} but not {@code XDG_CONFIG_HOME}, and {@link #status}/{@link
+     * #fullStatus} (plus every other raw {@code git} subprocess this class started) set NOTHING at
+     * all — inheriting the JVM's whole real environment, including the operator's real {@code
+     * ~/.gitconfig} and real default excludes file ({@code $XDG_CONFIG_HOME/git/ignore} or {@code
+     * $HOME/.config/git/ignore}, applied by git with no {@code core.excludesFile} configured at
+     * all — see {@code gitignore(5)}). {@code GIT_CONFIG_GLOBAL=/dev/null} does not stop that
+     * default from applying; only setting {@code XDG_CONFIG_HOME} to a directory that provably
+     * carries no {@code git/ignore} does.
+     *
+     * <p>This is the same isolation {@link #hermeticGitEnv} already gives {@link
+     * #seedingGitWorktrees}'s production {@link GitWorktrees} instances (fleetd #362 review fix,
+     * finding 2), reused here for every subprocess the TEST ITSELF starts to drive and inspect
+     * those fixture repos.
+     */
+    private static Map<String, String> hermeticEnv() {
+        return hermeticGitEnv(CLASS_TMP);
+    }
+
+    /**
+     * The one seam every git subprocess in this class is built through — see criterion 4's
+     * self-check, {@link #everyGitSubprocessGoesThroughTheHermeticFactory}, which fails the moment
+     * a future helper builds its own {@code git} subprocess directly instead of calling this, so
+     * the omission that caused fleetd #369 gets caught by name rather than rediscovered by a
+     * poisoned machine. The one deliberate exception is {@link
+     * #worktreeCredentialHelperCompletesWithoutUsingAnInheritedHelper}, which needs a
+     * non-hermetic, test-controlled global config to prove the credential helper ignores it — see
+     * the comment on that test.
+     */
+    private static ProcessBuilder gitProcessBuilder(Path cwd, String... args) {
+        List<String> cmd = new java.util.ArrayList<>(List.of("git"));
+        cmd.addAll(List.of(args));
+        ProcessBuilder pb = new ProcessBuilder(cmd).directory(cwd.toFile()).redirectErrorStream(true);
+        pb.environment().putAll(hermeticEnv());
+        return pb;
+    }
+
     private static Path initRepo(Path dir) throws Exception {
         Files.createDirectories(dir);
         git(dir, "init", "-q", "-b", "main");
@@ -70,23 +121,16 @@ class GitWorktreesTest {
     }
 
     private static String gitOutput(Path cwd, String... args) throws Exception {
-        List<String> cmd = new java.util.ArrayList<>(List.of("git"));
-        cmd.addAll(List.of(args));
-        ProcessBuilder pb = new ProcessBuilder(cmd).directory(cwd.toFile()).redirectErrorStream(true);
-        pb.environment().put("GIT_CONFIG_GLOBAL", "/dev/null");
-        pb.environment().put("GIT_CONFIG_SYSTEM", "/dev/null");
-        pb.environment().put("GIT_TERMINAL_PROMPT", "0");
-        Process p = pb.start();
+        Process p = gitProcessBuilder(cwd, args).start();
         String out = new String(p.getInputStream().readAllBytes());
-        assertTrue(p.waitFor(30, TimeUnit.SECONDS), "git timed out: " + String.join(" ", cmd));
+        assertTrue(p.waitFor(30, TimeUnit.SECONDS), "git timed out: git " + String.join(" ", args));
         assertEquals(0, p.exitValue(), "git " + String.join(" ", args) + " failed:\n" + out);
         return out;
     }
 
     /** Pending changes to {@code file} in {@code cwd}, empty when git considers it unmodified. */
     private static String status(Path cwd, String file) throws Exception {
-        Process p = new ProcessBuilder("git", "status", "--porcelain", "--", file)
-                .directory(cwd.toFile()).redirectErrorStream(true).start();
+        Process p = gitProcessBuilder(cwd, "status", "--porcelain", "--", file).start();
         String out = new String(p.getInputStream().readAllBytes());
         assertTrue(p.waitFor(30, TimeUnit.SECONDS), "git status timed out");
         return out;
@@ -94,16 +138,14 @@ class GitWorktreesTest {
 
     /** Every pending change in {@code cwd} — the whole-tree porcelain status, unlike {@link #status}. */
     private static String fullStatus(Path cwd) throws Exception {
-        Process p = new ProcessBuilder("git", "status", "--porcelain")
-                .directory(cwd.toFile()).redirectErrorStream(true).start();
+        Process p = gitProcessBuilder(cwd, "status", "--porcelain").start();
         String out = new String(p.getInputStream().readAllBytes());
         assertTrue(p.waitFor(30, TimeUnit.SECONDS), "git status timed out");
         return out;
     }
 
     private static String revParse(Path cwd, String ref) throws Exception {
-        Process p = new ProcessBuilder("git", "-C", cwd.toString(), "rev-parse", ref)
-                .redirectErrorStream(true).start();
+        Process p = gitProcessBuilder(cwd, "rev-parse", ref).start();
         String out = new String(p.getInputStream().readAllBytes()).trim();
         assertTrue(p.waitFor(30, TimeUnit.SECONDS), "git rev-parse timed out");
         assertEquals(0, p.exitValue(), "git rev-parse " + ref + " failed:\n" + out);
@@ -112,8 +154,7 @@ class GitWorktreesTest {
 
     /** The recursive file list of a commit's tree — used to check what a snapshot actually committed. */
     private static String lsTree(Path cwd, String ref) throws Exception {
-        Process p = new ProcessBuilder("git", "-C", cwd.toString(), "ls-tree", "-r", "--name-only", ref)
-                .redirectErrorStream(true).start();
+        Process p = gitProcessBuilder(cwd, "ls-tree", "-r", "--name-only", ref).start();
         String out = new String(p.getInputStream().readAllBytes());
         assertTrue(p.waitFor(30, TimeUnit.SECONDS), "git ls-tree timed out");
         assertEquals(0, p.exitValue(), "git ls-tree " + ref + " failed:\n" + out);
@@ -124,8 +165,7 @@ class GitWorktreesTest {
      *  snapshot's tree changed relative to its parent, the same shape {@code git status --porcelain}
      *  reports for the worktree it was taken from. */
     private static Set<String> diffNameOnly(Path cwd, String from, String to) throws Exception {
-        Process p = new ProcessBuilder("git", "-C", cwd.toString(), "diff", "--name-only", from, to)
-                .redirectErrorStream(true).start();
+        Process p = gitProcessBuilder(cwd, "diff", "--name-only", from, to).start();
         String out = new String(p.getInputStream().readAllBytes());
         assertTrue(p.waitFor(30, TimeUnit.SECONDS), "git diff timed out");
         assertEquals(0, p.exitValue(), "git diff " + from + ".." + to + " failed:\n" + out);
@@ -151,8 +191,7 @@ class GitWorktreesTest {
     }
 
     private static String forEachRef(Path cwd, String pattern) throws Exception {
-        Process p = new ProcessBuilder("git", "-C", cwd.toString(), "for-each-ref", pattern)
-                .redirectErrorStream(true).start();
+        Process p = gitProcessBuilder(cwd, "for-each-ref", pattern).start();
         String out = new String(p.getInputStream().readAllBytes());
         assertTrue(p.waitFor(30, TimeUnit.SECONDS), "git for-each-ref timed out");
         assertEquals(0, p.exitValue(), "git for-each-ref " + pattern + " failed:\n" + out);
@@ -161,8 +200,7 @@ class GitWorktreesTest {
 
     /** Write {@code content} as a blob into the object database; returns its sha. */
     private static String blobOf(Path cwd, String content) throws Exception {
-        Process p = new ProcessBuilder("git", "-C", cwd.toString(), "hash-object", "-w", "--stdin")
-                .redirectErrorStream(true).start();
+        Process p = gitProcessBuilder(cwd, "hash-object", "-w", "--stdin").start();
         p.getOutputStream().write(content.getBytes(StandardCharsets.UTF_8));
         p.getOutputStream().close();
         String out = new String(p.getInputStream().readAllBytes()).trim();
@@ -173,8 +211,7 @@ class GitWorktreesTest {
 
     /** Build a single-file tree object from {@code blob}; returns the tree's sha. */
     private static String treeOf(Path cwd, String path, String blob) throws Exception {
-        Process p = new ProcessBuilder("git", "-C", cwd.toString(), "mktree")
-                .redirectErrorStream(true).start();
+        Process p = gitProcessBuilder(cwd, "mktree").start();
         p.getOutputStream().write(("100644 blob " + blob + "\t" + path + "\n").getBytes(StandardCharsets.UTF_8));
         p.getOutputStream().close();
         String out = new String(p.getInputStream().readAllBytes()).trim();
@@ -186,10 +223,9 @@ class GitWorktreesTest {
     /** {@code git commit-tree} rooted at {@code tree} with a chosen committer date; returns the sha. */
     private static String commitTree(Path cwd, String tree, String parent, String committerDate,
                                      String message) throws Exception {
-        ProcessBuilder pb = new ProcessBuilder("git", "-C", cwd.toString(), "commit-tree",
-                tree, "-p", parent, "-m", message);
+        ProcessBuilder pb = gitProcessBuilder(cwd, "commit-tree", tree, "-p", parent, "-m", message);
         pb.environment().put("GIT_COMMITTER_DATE", committerDate);
-        Process p = pb.redirectErrorStream(true).start();
+        Process p = pb.start();
         String out = new String(p.getInputStream().readAllBytes()).trim();
         assertTrue(p.waitFor(30, TimeUnit.SECONDS), "git commit-tree timed out");
         assertEquals(0, p.exitValue(), "git commit-tree failed:\n" + out);
@@ -262,6 +298,11 @@ class GitWorktreesTest {
                     helper = !f() { printf 'username=%s\\npassword=%s\\n\\n' operator operator-secret; }; f
                 """);
 
+        // fleetd #369: the one deliberate exception to gitProcessBuilder. This test's whole point is
+        // that git must resolve `globalConfig` (a synthetic "operator's global config", never the
+        // real machine's) and then IGNORE it — so it cannot use the shared hermetic env, which would
+        // point GIT_CONFIG_GLOBAL at /dev/null and defeat the very thing under test. It never runs
+        // `git status`, so it does not need XDG_CONFIG_HOME isolation either.
         ProcessBuilder pb = new ProcessBuilder("git", "credential", "fill")
                 .directory(Path.of(wt).toFile()).redirectErrorStream(true);
         pb.environment().put("GIT_CONFIG_GLOBAL", globalConfig.toString());
@@ -328,20 +369,16 @@ class GitWorktreesTest {
         Path worktree = Path.of(wt);
         assertEquals("https://git.ltms.dev/akb/kb.git",
                 gitOutput(worktree, "remote", "get-url", "origin").trim());
-        assertEquals(1, exitCode("git", "-C", wt, "config", "--worktree", "--get-regexp", "^url\\."),
+        assertEquals(1, gitExitCode(worktree, "config", "--worktree", "--get-regexp", "^url\\."),
                 "no url.*.insteadOf rewrite should be added for an already-HTTPS origin");
     }
 
     /** Test-local exit-code probe, mirroring {@link GitWorktrees#exitCode} for an assertion the
      *  production class does not expose. */
-    private static int exitCode(String... command) throws Exception {
-        ProcessBuilder pb = new ProcessBuilder(command).redirectErrorStream(true);
-        pb.environment().put("GIT_CONFIG_GLOBAL", "/dev/null");
-        pb.environment().put("GIT_CONFIG_SYSTEM", "/dev/null");
-        pb.environment().put("GIT_TERMINAL_PROMPT", "0");
-        Process p = pb.start();
+    private static int gitExitCode(Path cwd, String... args) throws Exception {
+        Process p = gitProcessBuilder(cwd, args).start();
         p.getInputStream().readAllBytes();
-        assertTrue(p.waitFor(30, TimeUnit.SECONDS), "command timed out: " + String.join(" ", command));
+        assertTrue(p.waitFor(30, TimeUnit.SECONDS), "command timed out: git " + String.join(" ", args));
         return p.exitValue();
     }
 
@@ -1469,4 +1506,437 @@ class GitWorktreesTest {
         assertTrue(reportingAppender.list.isEmpty(),
                 "a null/empty overlay must log nothing, got:\n" + capturedMessages());
     }
+
+    // ---- fleetd #362: seedSkills. Drives GitWorktrees#add end-to-end (not a bare worktree) so the
+    // real memberSkillsSource wiring is exercised, exactly like the credential-helper/origin tests
+    // above do for their own seams. ----
+
+    /** Write {@code content} as {@code <dir>/<skillName>/SKILL.md}, creating {@code dir} first. */
+    private static void writeSkill(Path dir, String skillName, String content) throws IOException {
+        Path skillFile = dir.resolve(skillName).resolve("SKILL.md");
+        Files.createDirectories(skillFile.getParent());
+        Files.writeString(skillFile, content);
+    }
+
+    /**
+     * fleetd #362 review fix, finding 2. {@code core.excludesFile}'s XDG-fallback branch
+     * ({@link GitWorktrees#previouslyEffectiveExcludesFileContent}) does not go through a {@code
+     * git} subprocess, so a first cut of it read {@code XDG_CONFIG_HOME}/{@code HOME} straight from
+     * the JVM's real environment — no test could isolate it, and on any machine carrying a real
+     * {@code ~/.config/git/ignore} (this repo's own dev machine does — measured, not assumed), every
+     * seeding test below silently composed with that real file instead of a controlled fixture.
+     * Every test that seeds at least one skill now constructs its {@link GitWorktrees} with this —
+     * an empty, machine-independent {@code XDG_CONFIG_HOME} (so the fallback resolves to a file that
+     * provably does not exist) plus the same {@code GIT_CONFIG_GLOBAL}/{@code GIT_CONFIG_SYSTEM}/
+     * {@code GIT_TERMINAL_PROMPT} isolation the {@link #git}/{@link #gitOutput} helpers already use
+     * for repo setup.
+     *
+     * <p>Scope, measured on the fleetd #369 merge and narrower than an earlier version of this
+     * comment claimed: this protects the {@link #seedingGitWorktrees} call sites plus — through
+     * {@link #gitProcessBuilder} — every {@code git} subprocess the TEST itself starts. It does
+     * NOT cover the {@code new GitWorktrees(...)} constructions elsewhere in this file that pass
+     * no env override, so a production instance built that way still inherits the JVM's real
+     * environment. (Re-measured for fleetd #373, on this file as it stands here: 4 call sites go
+     * through {@link #seedingGitWorktrees(Path, String, Path)} — not 5, an earlier count this
+     * comment and fleetd #373's own ticket text both repeated without re-running it — out of 59
+     * total {@code new GitWorktrees(...)} occurrences, one of which is the shared construction
+     * inside {@link #seedingGitWorktrees(Path, String, Map)} itself. This class-wide count moves
+     * every time a test is added, so treat any number here as a snapshot, not a fact to cite
+     * without recounting.) Stripping the {@code gitEnv} override from a {@link
+     * #seedingGitWorktrees} call site leaves the class green both with and without the poison
+     * command above for that call site's OWN test, so that half was unpinned until fleetd #373
+     * added {@link #seedingGitWorktreesResolvesTheExcludesFileFallbackInsideItsThrowawayDirectory}
+     * below, which asserts the property directly instead of relying on a poisoned real machine.
+     */
+    private static Map<String, String> hermeticGitEnv(Path tmp) {
+        return hermeticGitEnvAt(tmp.resolve("hermetic-xdg-config-home-" + System.nanoTime()));
+    }
+
+    /** Same isolation as {@link #hermeticGitEnv(Path)}, with an explicit {@code XDG_CONFIG_HOME}
+     *  instead of a fresh nanoTime-unique one under {@code tmp} — used by
+     *  {@link #seedingGitWorktreesResolvesTheExcludesFileFallbackInsideItsThrowawayDirectory}
+     *  (fleetd #373) so it can pre-populate that directory with a marker BEFORE the production
+     *  {@link GitWorktrees} instance reads it, something the random per-call name from
+     *  {@link #hermeticGitEnv(Path)} makes impossible to predict from outside. */
+    private static Map<String, String> hermeticGitEnvAt(Path xdgConfigHome) {
+        return Map.of(
+                "GIT_CONFIG_GLOBAL", "/dev/null",
+                "GIT_CONFIG_SYSTEM", "/dev/null",
+                "GIT_TERMINAL_PROMPT", "0",
+                "XDG_CONFIG_HOME", xdgConfigHome.toString());
+    }
+
+    /** {@link GitWorktrees}'s full test seam, with a {@code memberSkillsSource} and no other
+     *  overrides — the shape every seeding test below needs, isolated via {@link #hermeticGitEnv}. */
+    private static GitWorktrees seedingGitWorktrees(Path root, String memberSkillsSource, Path tmp) {
+        return seedingGitWorktrees(root, memberSkillsSource, hermeticGitEnv(tmp));
+    }
+
+    /** Same shape as {@link #seedingGitWorktrees(Path, String, Path)}, taking an already-built
+     *  {@code gitEnv} directly rather than computing one via {@link #hermeticGitEnv(Path)} — lets
+     *  fleetd #373's test drive the exact production construction a real member spawn uses, with a
+     *  {@code gitEnv} it has already pre-populated a marker into. */
+    private static GitWorktrees seedingGitWorktrees(Path root, String memberSkillsSource, Map<String, String> gitEnv) {
+        return new GitWorktrees(root.toString(), null, _ -> {}, null, null, memberSkillsSource, gitEnv);
+    }
+
+    /** Acceptance criterion 2 (part 1): a worktree with no {@code .claude/} at all gets the skill
+     *  copied in from the configured {@code memberSkillsSource}, structure and content intact. */
+    @Test
+    void seedSkillsCopiesIntoAWorktreeWithNoClaudeDirAtAll(@TempDir Path tmp) throws Exception {
+        Path repo = initRepo(tmp.resolve("repo"));
+        Path skillsSource = tmp.resolve("skills-src");
+        writeSkill(skillsSource, "implementer", "IMPLEMENTER SKILL\n");
+
+        String wt = seedingGitWorktrees(tmp.resolve("wts"), skillsSource.toString(), tmp)
+                .add(repo.toString(), "cb-362-fresh", "HEAD");
+
+        assertEquals("IMPLEMENTER SKILL\n",
+                Files.readString(Path.of(wt, ".claude", "skills", "implementer", "SKILL.md")));
+    }
+
+    /** Acceptance criterion 2 (part 2) / invariant 1: a repo that already ships its own {@code
+     *  implementer} skill keeps it byte-for-byte — fleetd's copy is never written over it, even
+     *  though the configured source also carries a same-named skill with different content. */
+    @Test
+    void seedSkillsNeverOverwritesAReposOwnSkill(@TempDir Path tmp) throws Exception {
+        Path repo = tmp.resolve("repo");
+        Files.createDirectories(repo);
+        git(repo, "init", "-q", "-b", "main");
+        git(repo, "config", "user.email", "test@example.invalid");
+        git(repo, "config", "user.name", "Test");
+        writeSkill(repo.resolve(".claude/skills"), "implementer", "REPO OWN SKILL\n");
+        git(repo, "add", ".claude");
+        git(repo, "commit", "-q", "-m", "repo ships its own implementer skill");
+        Path skillsSource = tmp.resolve("skills-src");
+        writeSkill(skillsSource, "implementer", "FLEETD SKILL — must never land here\n");
+
+        String wt = new GitWorktrees(tmp.resolve("wts").toString(), null, skillsSource.toString())
+                .add(repo.toString(), "cb-362-repo-own", "HEAD");
+
+        assertEquals("REPO OWN SKILL\n",
+                Files.readString(Path.of(wt, ".claude", "skills", "implementer", "SKILL.md")),
+                "the repo's own committed skill must survive untouched");
+    }
+
+    /** Acceptance criterion 2 (part 3) / invariant 3: a misconfigured or missing {@code
+     *  memberSkillsSource} must never fail the spawn — the worktree is still created. */
+    @Test
+    void seedSkillsIsBestEffortWhenSourceDoesNotExist(@TempDir Path tmp) throws Exception {
+        Path repo = initRepo(tmp.resolve("repo"));
+        String missingSource = tmp.resolve("does-not-exist").toString();
+
+        String wt = new GitWorktrees(tmp.resolve("wts").toString(), null, missingSource)
+                .add(repo.toString(), "cb-362-missing-src", "HEAD");
+
+        assertTrue(Files.isDirectory(Path.of(wt)), "the spawn must still produce a worktree");
+        assertFalse(Files.exists(Path.of(wt, ".claude", "skills")),
+                "nothing should be seeded when the source directory does not exist");
+        assertTrue(capturedMessages().stream().anyMatch(m -> m.contains("is not a directory")),
+                "expected a warning naming the bad memberSkills source, got:\n" + capturedMessages());
+    }
+
+    /** Acceptance criterion 3: prove invariant 2 with a real git command — a freshly seeded skill
+     *  must not appear in {@code git status --porcelain} for the worktree it was seeded into. */
+    @Test
+    void seedSkillsHidesSeededPathsFromGitStatus(@TempDir Path tmp) throws Exception {
+        Path repo = initRepo(tmp.resolve("repo"));
+        Path skillsSource = tmp.resolve("skills-src");
+        writeSkill(skillsSource, "implementer", "IMPLEMENTER SKILL\n");
+
+        String wt = seedingGitWorktrees(tmp.resolve("wts"), skillsSource.toString(), tmp)
+                .add(repo.toString(), "cb-362-status", "HEAD");
+
+        assertEquals("", fullStatus(Path.of(wt)),
+                "a seeded skill must be invisible to git status, so it can never be staged or committed");
+    }
+
+    /** Invariant 2, the other direction: the exclude {@link #seedSkillsHidesSeededPathsFromGitStatus}
+     *  proves is scoped to ONE worktree, not the whole repo. A second worktree of the same repo,
+     *  provisioned with no {@code memberSkillsSource}, still reports an untracked {@code
+     *  .claude/skills/} the ordinary way — proving the exclude did not leak in via the shared
+     *  {@code .git/info/exclude} (which a linked worktree resolves to the repo's COMMON git dir). */
+    @Test
+    void seedSkillsExcludeDoesNotLeakIntoASiblingWorktree(@TempDir Path tmp) throws Exception {
+        Path repo = initRepo(tmp.resolve("repo"));
+        Path skillsSource = tmp.resolve("skills-src");
+        writeSkill(skillsSource, "implementer", "IMPLEMENTER SKILL\n");
+        GitWorktrees seeding = seedingGitWorktrees(tmp.resolve("wts"), skillsSource.toString(), tmp);
+        // `plain` never seeds anything (memberSkillsSource is null, so seedSkills no-ops before it
+        // ever touches core.excludesFile), so it does not need the hermetic gitEnv seam.
+        GitWorktrees plain = new GitWorktrees(tmp.resolve("wts").toString());
+
+        String seededWt = seeding.add(repo.toString(), "cb-362-scope-a", "HEAD");
+        String plainWt = plain.add(repo.toString(), "cb-362-scope-b", "HEAD");
+        // Simulate the same untracked shape landing in the sibling worktree by hand, since `plain`
+        // was never configured with a memberSkillsSource to seed it itself.
+        writeSkill(Path.of(plainWt, ".claude", "skills"), "implementer", "unrelated untracked content\n");
+
+        assertEquals("", fullStatus(Path.of(seededWt)), "seeded worktree stays clean");
+        assertTrue(porcelainPaths(fullStatus(Path.of(plainWt))).contains(".claude/"),
+                "an unrelated worktree's own untracked .claude/ must still show up in its status — "
+                        + "the seeded worktree's exclude must not have leaked into it, got:\n"
+                        + fullStatus(Path.of(plainWt)));
+    }
+
+    /** Criterion 2's log shape, mirroring the {@code overlayParity} log assertions above: the
+     *  denominator, what was seeded, and what was kept because the repo already had it. */
+    @Test
+    void seedSkillsLogsSeededAndKept(@TempDir Path tmp) throws Exception {
+        reportingLogger.setLevel(Level.INFO);
+        Path repo = tmp.resolve("repo");
+        Files.createDirectories(repo);
+        git(repo, "init", "-q", "-b", "main");
+        git(repo, "config", "user.email", "test@example.invalid");
+        git(repo, "config", "user.name", "Test");
+        writeSkill(repo.resolve(".claude/skills"), "hunter", "REPO OWN HUNTER\n");
+        git(repo, "add", ".");
+        git(repo, "commit", "-q", "-m", "repo ships hunter only");
+        Path skillsSource = tmp.resolve("skills-src");
+        writeSkill(skillsSource, "hunter", "FLEETD HUNTER\n");
+        writeSkill(skillsSource, "implementer", "FLEETD IMPLEMENTER\n");
+
+        seedingGitWorktrees(tmp.resolve("wts"), skillsSource.toString(), tmp)
+                .add(repo.toString(), "cb-362-log", "HEAD");
+
+        assertTrue(capturedMessages().stream().anyMatch(m ->
+                        m.contains("seeded: implementer") && m.contains("kept the repo's own copy of: hunter")),
+                "expected a summary naming both the seeded and kept skills, got:\n" + capturedMessages());
+    }
+
+    /**
+     * fleetd #362 review fix — the "compose, don't replace" invariant, a third direction alongside
+     * {@link #seedSkillsHidesSeededPathsFromGitStatus} and
+     * {@link #seedSkillsExcludeDoesNotLeakIntoASiblingWorktree}. {@code core.excludesFile} is
+     * single-valued: the first cut of {@code excludeSeededSkillsFromGitStatus} pointed it at
+     * fleetd's own exclude file with {@code --replace-all}, which SHADOWS whatever excludesFile the
+     * worktree was already resolving (an operator's global config, most commonly) instead of adding
+     * to it. Concretely, this repo's own {@code .gitignore} does not ignore {@code target/} — only an
+     * operator's global excludesFile does — so every worker's {@code mvn clean install} would
+     * otherwise make {@code target/} appear as untracked, and CB-576's deliberately
+     * untracked-inclusive {@code hasUncommitted} would then read every such worktree as dirty
+     * forever, so {@code SessionManager} never cleans it up.
+     *
+     * <p>A synthetic "operator's global git config" is isolated via {@code GIT_CONFIG_GLOBAL}
+     * pointed at a throwaway temp file, passed to {@link GitWorktrees} through its {@code gitEnv}
+     * test seam — never the real machine's own git config. That global config ignores {@code
+     * target}. A skill is then seeded through the real {@link GitWorktrees#add} path, and a file
+     * named {@code target} is written into the worktree afterward: {@code git status --porcelain}
+     * must still be empty, proving the operator's own global pattern kept applying after seeding.
+     */
+    @Test
+    void seedSkillsComposesWithAnAlreadyEffectiveGlobalExcludesFile(@TempDir Path tmp) throws Exception {
+        Path globalExcludes = tmp.resolve("operator-global-ignore");
+        Files.writeString(globalExcludes, "target\n");
+        Path globalConfig = tmp.resolve("operator-global.gitconfig");
+        Files.writeString(globalConfig, "[core]\n\texcludesFile = " + globalExcludes + "\n");
+        Map<String, String> gitEnv = Map.of(
+                "GIT_CONFIG_GLOBAL", globalConfig.toString(),
+                "GIT_CONFIG_SYSTEM", "/dev/null",
+                "GIT_TERMINAL_PROMPT", "0",
+                // core.excludesFile is explicitly set above, so the XDG fallback branch is never
+                // reached here — this is belt-and-braces so the test stays hermetic even if that
+                // ever changes, matching every other seeding test in this file.
+                "XDG_CONFIG_HOME", tmp.resolve("unused-xdg-config-home").toString());
+
+        Path repo = initRepo(tmp.resolve("repo"));
+        Path skillsSource = tmp.resolve("skills-src");
+        writeSkill(skillsSource, "implementer", "IMPLEMENTER SKILL\n");
+        GitWorktrees gitWorktrees = new GitWorktrees(tmp.resolve("wts").toString(), null, _ -> {},
+                null, null, skillsSource.toString(), gitEnv);
+
+        String wt = gitWorktrees.add(repo.toString(), "cb-362-global-compose", "HEAD");
+        assertEquals("IMPLEMENTER SKILL\n",
+                Files.readString(Path.of(wt, ".claude", "skills", "implementer", "SKILL.md")),
+                "fixture check — the skill really was seeded");
+
+        Files.writeString(Path.of(wt, "target"), "build output the operator's global config ignores\n");
+
+        String porcelain = fullStatus(Path.of(wt));
+        assertEquals("", porcelain,
+                "the operator's own global excludesFile pattern ('target') must still apply after "
+                        + "skill seeding ran — got:\n" + porcelain);
+    }
+
+    /**
+     * fleetd #362 review fix, finding 2: pins the XDG-fallback branch of {@link
+     * GitWorktrees#previouslyEffectiveExcludesFileContent}, exercised when {@code core.excludesFile}
+     * is unset entirely (no global, local, or worktree-scoped value at all) — the branch that used to
+     * read {@code XDG_CONFIG_HOME} straight from the JVM's own environment, unreachable by any test
+     * seam, and would silently compose with whatever real {@code ~/.config/git/ignore} happened to
+     * exist on the machine running the suite. {@code GIT_CONFIG_GLOBAL} points at an empty file (so
+     * {@code core.excludesFile} is genuinely unset, forcing the fallback branch to fire — not the
+     * "already configured" branch {@link #seedSkillsComposesWithAnAlreadyEffectiveGlobalExcludesFile}
+     * covers), and {@code XDG_CONFIG_HOME} is isolated through the {@code gitEnv} seam at a throwaway
+     * temp dir carrying a synthetic {@code git/ignore} that ignores {@code xdg-fallback-marker}. A
+     * skill is seeded through the real {@link GitWorktrees#add} path, and a file named {@code
+     * xdg-fallback-marker} is written into the worktree afterward: {@code git status --porcelain}
+     * must still be empty, proving the XDG-default pattern kept applying after seeding.
+     *
+     * <p>Deleting the fallback (so an unset key composes with {@code ""}) turns this test red with:
+     * {@code expected: <> but was: <?? xdg-fallback-marker\n>} — see the PR body for the pasted
+     * failure from actually running that mutation.
+     */
+    @Test
+    void seedSkillsComposesWithTheXdgDefaultExcludesFileWhenNoneIsConfigured(@TempDir Path tmp) throws Exception {
+        Path xdgConfigHome = tmp.resolve("xdg-config-home");
+        Files.createDirectories(xdgConfigHome.resolve("git"));
+        Files.writeString(xdgConfigHome.resolve("git").resolve("ignore"), "xdg-fallback-marker\n");
+        Path emptyGlobalConfig = tmp.resolve("empty-global.gitconfig");
+        Files.writeString(emptyGlobalConfig, "");
+        Map<String, String> gitEnv = Map.of(
+                "GIT_CONFIG_GLOBAL", emptyGlobalConfig.toString(),
+                "GIT_CONFIG_SYSTEM", "/dev/null",
+                "GIT_TERMINAL_PROMPT", "0",
+                "XDG_CONFIG_HOME", xdgConfigHome.toString());
+
+        Path repo = initRepo(tmp.resolve("repo"));
+        Path skillsSource = tmp.resolve("skills-src");
+        writeSkill(skillsSource, "implementer", "IMPLEMENTER SKILL\n");
+        GitWorktrees gitWorktrees = new GitWorktrees(tmp.resolve("wts").toString(), null, _ -> {},
+                null, null, skillsSource.toString(), gitEnv);
+
+        String wt = gitWorktrees.add(repo.toString(), "cb-362-xdg-fallback", "HEAD");
+        assertEquals("IMPLEMENTER SKILL\n",
+                Files.readString(Path.of(wt, ".claude", "skills", "implementer", "SKILL.md")),
+                "fixture check — the skill really was seeded");
+
+        Files.writeString(Path.of(wt, "xdg-fallback-marker"),
+                "build output the XDG default ignore file (not core.excludesFile) covers\n");
+
+        String porcelain = fullStatus(Path.of(wt));
+        assertEquals("", porcelain,
+                "the XDG default excludesFile pattern ('xdg-fallback-marker') must still apply "
+                        + "after skill seeding ran — got:\n" + porcelain);
+    }
+
+    /**
+     * fleetd #373. Pins the production seam that fleetd #362 review finding 2 protects: {@link
+     * GitWorktrees#previouslyEffectiveExcludesFileContent}'s XDG-fallback branch reads {@code
+     * XDG_CONFIG_HOME}/{@code HOME} straight in Java, not through a {@code git} subprocess, so
+     * {@code gitEnv} — the constructor seam every {@link #seedingGitWorktrees} instance in this
+     * class is built with — is the ONLY thing that can isolate it. A mutation run during the
+     * fleetd #372/#369 merge found this unpinned: replacing {@code hermeticGitEnv(tmp)} with
+     * {@code null} in {@link #seedingGitWorktrees(Path, String, Path)} left every test in this
+     * class green — the 56 tests that would fail against a real machine's poisoned {@code
+     * XDG_CONFIG_HOME} were fixed by fleetd #369's subprocess-level isolation, but none of them
+     * looks at what THIS Java-side read resolves, so deleting the override stays invisible.
+     *
+     * <p>This test asserts the PROPERTY, not the constructor argument: a {@link GitWorktrees}
+     * built for seeding — through the very same {@link #seedingGitWorktrees(Path, String, Map)}
+     * construction every other seeding test in this class goes through — must resolve the
+     * excludes-file fallback inside its own throwaway {@code gitEnv}-supplied directory. It needs
+     * NO externally-set poisoned environment variable: the marker pattern below is written ONLY
+     * inside a throwaway {@code XDG_CONFIG_HOME} this test controls directly (bypassing {@link
+     * #hermeticGitEnv(Path)}'s unpredictable nanoTime-named directory, via {@link
+     * #hermeticGitEnvAt}, so the marker can be in place before the production instance ever reads
+     * it), reachable ONLY through the {@code gitEnv} seam. If that seam is stripped, the
+     * production code instead falls back to resolving the REAL {@code XDG_CONFIG_HOME}/{@code
+     * HOME} of the machine running the test — which does not carry this marker — so the marker
+     * file below shows up as untracked and the assertion fails on any machine, with no poison
+     * command required. See the PR body for the pasted failure from actually running that
+     * mutation (removing the {@code gitEnv} override from this test's own construction).
+     */
+    @Test
+    void seedingGitWorktreesResolvesTheExcludesFileFallbackInsideItsThrowawayDirectory(@TempDir Path tmp)
+            throws Exception {
+        Path xdgConfigHome = tmp.resolve("cb373-xdg-config-home");
+        Files.createDirectories(xdgConfigHome.resolve("git"));
+        Files.writeString(xdgConfigHome.resolve("git").resolve("ignore"), "cb373-xdg-fallback-marker\n");
+        Map<String, String> gitEnv = hermeticGitEnvAt(xdgConfigHome);
+
+        Path repo = initRepo(tmp.resolve("repo"));
+        Path skillsSource = tmp.resolve("skills-src");
+        writeSkill(skillsSource, "implementer", "IMPLEMENTER SKILL\n");
+        GitWorktrees seeding = seedingGitWorktrees(tmp.resolve("wts"), skillsSource.toString(), gitEnv);
+
+        String wt = seeding.add(repo.toString(), "cb-373-xdg-seam", "HEAD");
+        assertEquals("IMPLEMENTER SKILL\n",
+                Files.readString(Path.of(wt, ".claude", "skills", "implementer", "SKILL.md")),
+                "fixture check — the skill really was seeded, so previouslyEffectiveExcludesFileContent ran");
+
+        Files.writeString(Path.of(wt, "cb373-xdg-fallback-marker"),
+                "would only be invisible to git status if the fallback resolved THIS throwaway "
+                        + "XDG_CONFIG_HOME rather than the real machine's\n");
+
+        String porcelain = fullStatus(Path.of(wt));
+        assertEquals("", porcelain,
+                "the marker pattern lives only in this test's throwaway XDG_CONFIG_HOME; git "
+                        + "status must still be empty, proving the production seam resolved the "
+                        + "excludes-file fallback through the gitEnv seam rather than the JVM's "
+                        + "real environment — got:\n" + porcelain);
+    }
+
+    /**
+     * fleetd #369, acceptance criterion 4 — make the fix hard to undo by accident. Every git
+     * subprocess this class starts is required to go through {@link #gitProcessBuilder}, the one
+     * place {@link #hermeticEnv} is applied; a helper built directly, the way the original leak in
+     * {@link #status}/{@link #fullStatus} was, is now a source-level fact this test can catch by
+     * name instead of a machine-dependent failure someone has to rediscover.
+     *
+     * <p>This counts a literal marker in this very file's own source, split into three
+     * concatenated pieces below so the count is not thrown off by this method's own text — a
+     * plain, unsplit occurrence of the marker anywhere in this file (a helper's construction, or a
+     * comment that happens to spell it out contiguously) adds to the count the same way. Today
+     * there are exactly two: the factory itself, and the one documented exception in {@link
+     * #worktreeCredentialHelperCompletesWithoutUsingAnInheritedHelper}, which needs a
+     * non-hermetic, test-controlled global config to prove the credential helper ignores it. A
+     * third means a new helper was added the old, leak-prone way — route it through {@link
+     * #gitProcessBuilder} instead, or explain the new exception here and bump this number.
+     */
+    @Test
+    void everyGitSubprocessGoesThroughTheHermeticFactory() throws Exception {
+        Path source = Path.of("src/test/java/dev/ltms/fleet/session/GitWorktreesTest.java");
+        String text = Files.readString(source);
+        String marker = "new " + "ProcessBuilder" + "(";
+        int count = 0;
+        for (int from = text.indexOf(marker); from >= 0; from = text.indexOf(marker, from + marker.length())) {
+            count++;
+        }
+        assertEquals(2, count,
+                "expected exactly 2 direct git-subprocess constructions in this file (the "
+                        + "gitProcessBuilder factory itself, plus the one documented exception in "
+                        + "worktreeCredentialHelperCompletesWithoutUsingAnInheritedHelper) — a "
+                        + "different count means a helper now bypasses the hermetic factory; route "
+                        + "it through gitProcessBuilder or document the new exception here");
+    }
+
+    /**
+     * fleetd #369 review round 2. {@link #everyGitSubprocessGoesThroughTheHermeticFactory} counts
+     * call sites, not behaviour — it catches a NEW helper built the old, leak-prone way, but it
+     * cannot catch {@link #gitProcessBuilder} itself being gutted: deleting {@code
+     * pb.environment().putAll(hermeticEnv())} from inside the factory leaves every call site
+     * unchanged, the count stays 2, and the whole unpoisoned suite stays green — the exact leak
+     * this ticket fixed would come back silently, with nothing but a human remembering to re-run
+     * the poison command to catch it. This test instead inspects what the factory actually hands
+     * to {@link ProcessBuilder#start()}, so it fails the moment the hermetic environment stops
+     * being applied, on any machine, with no poison needed.
+     *
+     * <p>The property under test: every git subprocess this class starts must run with an
+     * environment that cannot see the operator's real git configuration. A call-site count is a
+     * proxy for that; this is the thing itself.
+     */
+    @Test
+    void gitProcessBuilderCarriesTheFullHermeticEnvironment(@TempDir Path tmp) {
+        Map<String, String> env = gitProcessBuilder(tmp, "status", "--porcelain").environment();
+
+        assertEquals("/dev/null", env.get("GIT_CONFIG_GLOBAL"),
+                "GIT_CONFIG_GLOBAL must be neutralized, or the operator's real ~/.gitconfig applies");
+        assertEquals("/dev/null", env.get("GIT_CONFIG_SYSTEM"),
+                "GIT_CONFIG_SYSTEM must be neutralized, or the machine's real /etc/gitconfig applies");
+        assertEquals("0", env.get("GIT_TERMINAL_PROMPT"),
+                "GIT_TERMINAL_PROMPT must be disabled, or a credential prompt can hang the subprocess");
+
+        String xdg = env.get("XDG_CONFIG_HOME");
+        assertNotNull(xdg,
+                "XDG_CONFIG_HOME must be set — left unset, git falls back to the operator's real "
+                        + "$HOME/.config/git/ignore (gitignore(5)), exactly fleetd #369's leak");
+        assertFalse(xdg.isBlank(), "XDG_CONFIG_HOME must not be blank — blank behaves like unset");
+        assertTrue(Path.of(xdg).startsWith(CLASS_TMP),
+                "XDG_CONFIG_HOME must point inside this test class's own throwaway directory, "
+                        + "never the operator's real one or the JVM's inherited value — got: " + xdg);
+        assertFalse(Files.exists(Path.of(xdg, "git", "ignore")),
+                "the resolved XDG default excludes file must provably not exist, or its contents "
+                        + "would silently apply to every git status this test class runs");
+    }
 }

fleetd/src/test/java/dev/ltms/fleet/session/MemberSessionRebuildPreservesEveryComponentTest.java

@@ -0,0 +1,190 @@
+package dev.ltms.fleet.session;
+
+import dev.ltms.fleet.peer.CharterReceipt;
+import dev.ltms.fleet.peer.MemberRole;
+import org.junit.jupiter.api.Test;
+
+import java.lang.reflect.Constructor;
+import java.lang.reflect.RecordComponent;
+import java.util.ArrayList;
+import java.util.Arrays;
+import java.util.LinkedHashMap;
+import java.util.List;
+import java.util.Locale;
+import java.util.Map;
+import java.util.Objects;
+import java.util.Set;
+import java.util.TreeSet;
+import java.util.function.Function;
+
+import static org.junit.jupiter.api.Assertions.assertEquals;
+
+/**
+ * Fleetd #358, the same "defect factory" #357 guarded on {@code FleetConfig.withDefaults()}
+ * (see {@code FleetConfigWithDefaultsPreservesEveryComponentTest}), reproduced here on
+ * {@link MemberSession} — the worse of the two sibling cases named in #358, because this record
+ * has FIVE independent rebuild sites instead of one: {@link MemberSession#withState},
+ * {@link MemberSession#withActivity}, {@link MemberSession#bumpTurn},
+ * {@link MemberSession#withAgentSessionId} and {@link MemberSession#withFailureReason} each end in
+ * their own literal {@code new MemberSession(...)} call. Add a 16th component and add the
+ * established back-compat constructor at the old (15-arg) arity, and every one of those five
+ * literal calls becomes a legal match for that new overload — silently dropping the new component,
+ * independently, on whichever of the five paths a missed update leaves behind. That is harder to
+ * spot than #357's single call site: the field would survive through some transitions and vanish
+ * through others.
+ *
+ * <p>Each check below builds one {@link MemberSession} through the TRUE canonical constructor —
+ * resolved by the record's own component types via {@code getDeclaredConstructor}, never by
+ * argument count, so it can never itself land on a back-compat overload — with a real, distinctive,
+ * non-null value in every component, calls the real rebuild method under test, and asserts every
+ * component the method is not documented to change survives unchanged, while the component(s) it IS
+ * documented to change come back as the new value it was given. A component that comes back
+ * anything else was silently dropped or lost — the shape of the defect this test exists to catch.
+ *
+ * <p>{@link #EXCLUDED_FROM_SURVIVAL_CHECK} is kept deliberately empty and size-pinned by
+ * {@link #exclusionListSizeIsPinned()}, for the same reason {@code FleetConfig}'s guard pins its own
+ * exclusion list at zero: a checker whose escape hatch can grow to silence a failure is not a
+ * checker. Every one of {@link MemberSession}'s 15 current components has a real, non-null,
+ * non-blank value here and none is excluded.
+ */
+class MemberSessionRebuildPreservesEveryComponentTest {
+
+    private static final RecordComponent[] COMPONENTS = MemberSession.class.getRecordComponents();
+
+    /** Deliberately empty today; grow it only with a matching justification, and re-pin the size. */
+    private static final Set<String> EXCLUDED_FROM_SURVIVAL_CHECK = Set.of();
+
+    /** One real, distinctive, non-null value per component — none of the 15 is excluded. */
+    private static Map<String, Object> baseValues() {
+        Map<String, Object> v = new LinkedHashMap<>();
+        v.put("paneId", "pane-guard");
+        v.put("terminalId", "term-guard");
+        v.put("profile", "profile-guard");
+        v.put("role", MemberRole.REVIEWER);
+        v.put("cwd", "/wt/guard");
+        v.put("ownerTerminal", "owner-guard");
+        v.put("spawnedAtNanos", 111_111L);
+        v.put("lastActivityAtNanos", 222_222L);
+        v.put("turnCount", 7);
+        v.put("state", MemberSession.State.BUSY);
+        v.put("worktree", "/wt/guard-tree");
+        v.put("branch", "worker/guard-branch");
+        v.put("charterReceipt", new CharterReceipt(
+                MemberRole.DEV, "profile-guard", "fleet.charters.dev", "deadbeefguard", 42));
+        v.put("agentSessionId", "agent-guard");
+        v.put("failureReason", "reason-guard");
+        assertNamesMatchComponents(v);
+        return v;
+    }
+
+    /**
+     * Guards {@link #baseValues()} itself against drifting from the record's real shape — forgetting
+     * to add a new component here fails this assertion by name, rather than silently checking one
+     * component fewer than the record has.
+     */
+    private static void assertNamesMatchComponents(Map<String, Object> values) {
+        Set<String> names = new TreeSet<>();
+        for (RecordComponent rc : COMPONENTS) {
+            names.add(rc.getName());
+        }
+        assertEquals(names, new TreeSet<>(values.keySet()),
+                "this test's value map has drifted from MemberSession's actual components — "
+                        + "update baseValues() alongside the record");
+    }
+
+    /**
+     * Builds a {@link MemberSession} through the TRUE canonical constructor — resolved by the
+     * record's own component types, not by argument count — so this never accidentally exercises a
+     * back-compat overload the way a literal {@code new MemberSession(...)} call risks doing.
+     */
+    private static MemberSession sessionOf(Map<String, Object> values) throws ReflectiveOperationException {
+        Class<?>[] types = Arrays.stream(COMPONENTS).map(RecordComponent::getType).toArray(Class<?>[]::new);
+        Object[] args = Arrays.stream(COMPONENTS).map(rc -> values.get(rc.getName())).toArray();
+        Constructor<MemberSession> ctor = MemberSession.class.getDeclaredConstructor(types);
+        return ctor.newInstance(args);
+    }
+
+    @Test
+    void exclusionListSizeIsPinned() {
+        assertEquals(0, EXCLUDED_FROM_SURVIVAL_CHECK.size(),
+                "EXCLUDED_FROM_SURVIVAL_CHECK grew from 0 — every entry needs a justification in "
+                        + "this test class's javadoc AND this assertion re-pinned to the new size; a "
+                        + "growing exclusion list that silences failures on its own is not a guard");
+    }
+
+    /**
+     * Shared check for one rebuild site: build a base session with a real value in every component,
+     * call {@code rebuild}, and assert every component comes back equal to {@code expectedOverrides}
+     * when named there, or equal to the base value otherwise. Prints the same denominator style as
+     * {@code FleetConfigWithDefaultsPreservesEveryComponentTest}.
+     */
+    private void checkRebuildSite(String siteName, Function<MemberSession, MemberSession> rebuild,
+                                  Map<String, Object> expectedOverrides) throws ReflectiveOperationException {
+        Map<String, Object> base = baseValues();
+        MemberSession session = sessionOf(base);
+        MemberSession result = rebuild.apply(session);
+
+        List<String> dropped = new ArrayList<>();
+        int checked = 0;
+        for (RecordComponent rc : COMPONENTS) {
+            String name = rc.getName();
+            if (EXCLUDED_FROM_SURVIVAL_CHECK.contains(name)) {
+                continue;
+            }
+            checked++;
+            Object expected = expectedOverrides.containsKey(name) ? expectedOverrides.get(name) : base.get(name);
+            Object actual;
+            try {
+                actual = rc.getAccessor().invoke(result);
+            } catch (ReflectiveOperationException e) {
+                throw new RuntimeException("failed to read MemberSession." + name + "()", e);
+            }
+            if (!Objects.equals(expected, actual)) {
+                dropped.add(String.format(Locale.ROOT,
+                        "%s: %s() was expected to carry (%s) for '%s' but returned %s — a component "
+                                + "silently dropped by %s(), the shape of the defect this test exists "
+                                + "to catch (its final \"return new MemberSession(...)\" call binding "
+                                + "to a back-compat constructor instead of the true canonical one)",
+                        name, siteName, expected, name, actual, siteName));
+            }
+        }
+
+        System.out.printf(Locale.ROOT,
+                "MemberSession.%s() component-survival coverage — %d components, %d checked, %d "
+                        + "excluded, %d survived%n",
+                siteName, COMPONENTS.length, checked, EXCLUDED_FROM_SURVIVAL_CHECK.size(),
+                checked - dropped.size());
+        assertEquals(List.of(), dropped,
+                siteName + "() silently dropped these components: " + dropped);
+    }
+
+    @Test
+    void withStatePreservesEveryOtherComponent() throws ReflectiveOperationException {
+        checkRebuildSite("withState", s -> s.withState(MemberSession.State.FAILED),
+                Map.of("state", MemberSession.State.FAILED));
+    }
+
+    @Test
+    void withActivityPreservesEveryOtherComponent() throws ReflectiveOperationException {
+        checkRebuildSite("withActivity", s -> s.withActivity(999_999L),
+                Map.of("lastActivityAtNanos", 999_999L));
+    }
+
+    @Test
+    void bumpTurnPreservesEveryOtherComponent() throws ReflectiveOperationException {
+        checkRebuildSite("bumpTurn", s -> s.bumpTurn(999_999L),
+                Map.of("lastActivityAtNanos", 999_999L, "turnCount", 8));
+    }
+
+    @Test
+    void withAgentSessionIdPreservesEveryOtherComponent() throws ReflectiveOperationException {
+        checkRebuildSite("withAgentSessionId", s -> s.withAgentSessionId("agent-updated"),
+                Map.of("agentSessionId", "agent-updated"));
+    }
+
+    @Test
+    void withFailureReasonPreservesEveryOtherComponent() throws ReflectiveOperationException {
+        checkRebuildSite("withFailureReason", s -> s.withFailureReason("reason-updated"),
+                Map.of("failureReason", "reason-updated"));
+    }
+}