fleetd #693, #676: pin lead-tab case-insensitivity, drop stale validator count

#693: add a FleetConfigTest case for two fleet.leaders tabs differing only
in case — mutating equalsIgnoreCase to equals left this uncaught before.

#676: rename theSweepMechanismIsGenericNotHardcodedToFleetConfigsSixNames
to theSweepRunsEveryValidateMethodOnAnUnrelatedClass, since there are
eight validators now, not six, and the count had drifted into the name
and its class-javadoc {@link}.

.claude/skills/fleets-status/SKILL.md

@@ -59,7 +59,7 @@ as `matches HEAD`, `drift`, or `unknown`; do not turn an unclear timestamp into
 Report the process identifier (PID) and uptime too:
 
 ```bash
-PIDS="$(pgrep -f 'run/fleetd.jar' || true)"
+PIDS="$(pgrep -f 'fleetd.jar' || true)"
 if [ -z "$PIDS" ]; then
   printf '%s\n' 'fleetd: not running'
 else

.claude/skills/handover/SKILL.md

@@ -164,6 +164,13 @@ fails.
 - **`accepted` does not mean your pane has been cleared.** It means every gate passed and the roll
   is scheduled to run once your current turn ends. Say your goodbye in the same turn — you will not
   get another one.
+- **If you are still running after that turn, the roll did not happen.** A roll that works clears
+  you, so surviving your own goodbye is itself the signal that it refused. Check with
+  `fleet_handover{action: "status", token}`, using the token you confirmed. `TURN_NEVER_SETTLED`
+  means your turn ran past `leadRollover.turnSettleSeconds` and **no `/clear` was ever sent**: your
+  context is intact and nothing was lost. Open a fresh request and retry. Never assume the roll
+  succeeded because `confirm` answered `accepted` — by the time it refuses, there is no caller left
+  to tell, so this check is the only thing that closes that gap.
 - **There is no terminal or session parameter, on purpose.** The pane is always your own, resolved
   from your connection, so you can only ever roll yourself.
 - **`operatorConfirmed` is your report of what a human told you.** Do not pass `true` because you

fleetd/src/main/java/dev/ltms/fleet/auth/Authz.java

@@ -20,16 +20,22 @@ public final class Authz {
         SPAWN,
         /** Tear a worker peer down. */
         STOP,
-        /** Deliver a turn to a session (or answer a worker's question). */
+        /** Deliver a turn to a local session, addressed by {@code sessionId}. */
         SEND,
+        /** Resolve a worker's blocked question and resume its turn, addressed by {@code turnId}. */
+        ANSWER,
+        /** Address a peer lead on another daemon over the coordination broker, by {@code coordId}. */
+        COORD_SEND,
         /** A worker's terminal reply for its own turn. */
         REPLY,
         /** A worker's mid-turn question to the primary. */
         ASK,
         /** Collect held replies from a session's inbox. */
         DRAIN,
-        /** Read-only observation: status, roster, profiles, task polling. */
+        /** Read-only roster, profile, and identity observation: no ticket, task, or turn state. */
         READ,
+        /** Poll a ticket, or read a session's status. */
+        TASK_READ,
         /**
          * Read (never ack) this daemon's own held lead-to-lead coordination mail (fleetd #421).
          *
@@ -71,11 +77,19 @@ public final class Authz {
             // escalating into the orchestrator role.
             case SPAWN, STOP, DRAIN, HANDOVER -> caller.isPrimary();
 
-            // Delivering a turn is open to the primary and the architect: an architect delegates
-            // to workers (that is the role's point) but still has no lifecycle rights. A worker is
-            // excluded — sending would be it escalating.
+            // Delivering a turn to a local session is open to the primary and the architect: an
+            // architect delegates to workers (that is the role's point) but still has no lifecycle
+            // rights. A worker is excluded — sending would be it escalating.
             case SEND -> caller.isPrimary() || caller.isArchitect();
 
+            // Same grant as SEND. Resolving a worker's blocked question is part of delegating to
+            // it, not a separate capability.
+            case ANSWER -> caller.isPrimary() || caller.isArchitect();
+
+            // Same grant as SEND. This leaves the daemon over the coordination broker rather than
+            // addressing a local session, but the caller who may do one may do the other.
+            case COORD_SEND -> caller.isPrimary() || caller.isArchitect();
+
             // The load-bearing rule: a caller acts only as the pane it occupies. CB-532 widened who
             // that can be — a lead answering another lead is replying for its OWN terminal, which
             // this already permits — while the rule itself is unchanged, and is what stops anyone
@@ -84,10 +98,17 @@ public final class Authz {
             // unnamed primary (token/loopback, no pane) owns nothing and is still excluded.
             case REPLY, ASK -> caller.ownsSession(targetSession);
 
-            // Observation is open to every authenticated role: a worker legitimately polls its own
-            // status, and the roster carries no secrets.
+            // READ is roster, profile, and identity observation — fleet_list, fleet_profiles, and
+            // fleet_whoami — and carries no secrets: no ticket reply, no pending question, and no
+            // other session's turn state. Those live under TASK_READ. METRICS is the separate
+            // Prometheus scrape. Both stay open to every authenticated role.
             case READ, METRICS -> caller.isPrimary() || caller.isWorker() || caller.isArchitect();
 
+            // Ticket polling and session status, open to every authenticated role the same as READ.
+            // Unlike READ, a holder may poll a ticket it did not create, or read another session's
+            // pending question and the turnId that answers it.
+            case TASK_READ -> caller.isPrimary() || caller.isWorker() || caller.isArchitect();
+
             // fleetd #421: reading held lead-to-lead mail is the primary's alone. An architect
             // holds READ today (CB-548), so "not primary" must mean not-architect here too — this
             // is coordination between leads, not observation of the roster.

fleetd/src/main/java/dev/ltms/fleet/config/FleetConfig.java

@@ -1129,11 +1129,8 @@ public record FleetConfig(
      *                            {@code tab} can never be discovered, launched or not
      * @param instances           how many of this lead should be live (default 1). The daemon
      *                            launches only the shortfall, so a restart adopts rather than doubles
-     * @param tabPrefix           no longer used to find a lead's tab — {@code tab} is matched
-     *                            exactly. Its only remaining job is the startup collision guard
-     *                            ({@link #validateLeadTabPrefixes()}), which still uses it to refuse
-     *                            a worker {@code tabLabel} template that could be misread as a lead.
-     *                            Default {@code "lead:"}
+     * @param tabPrefix           lead-tab naming convention checked against member labels. Lead
+     *                            identity uses {@code tab}. Default {@code "lead:"}
      * @param scanIntervalSeconds how long a tab scan is cached before herdr is asked again; also the
      *                            worst case before a newly-labelled tab is recognised. Default 10
      * @param kind                which agent runs there ({@code claude}, {@code opencode}, …)
@@ -1236,10 +1233,7 @@ public record FleetConfig(
                         String tabLabel) {
 
         /**
-         * Role first, so the tab bar reads as the fleet and so the label shares a namespace with a
-         * lead's {@code tabPrefix}. Because {@code {role}} comes from a closed enum, a generated
-         * member label can never begin with {@code "lead:"} — the clash that
-         * {@link #validateLeadTabPrefixes()} used to have to check for is unrepresentable here.
+         * Role first, so the tab bar identifies the member's fleet role.
          */
         public static final String DEFAULT_TAB_LABEL = "{role}: {profile} #{n}";
 
@@ -2685,28 +2679,14 @@ public record FleetConfig(
     }
 
     /**
-     * Reject a lead-scan convention that a worker tab would also satisfy (CB-531).
+     * Reject a member tab-label template that could render as a configured lead tab or match a
+     * lead-tab naming convention, and reject two {@code fleet.leaders} entries that share one exact
+     * tab.
      *
-     * <p>The scan reads a tab label and concludes "a lead lives here". fleetd also <em>writes</em>
-     * tab labels — every member gets one rendered into its tab. Choose a lead {@code tabPrefix} that
-     * a member template matches and the daemon starts labelling its own members as leads, promoting
-     * the entire fleet to {@link dev.ltms.fleet.auth.Role#PRIMARY} with no message and no diff.
-     * {@link #validatePanePlacementAgainstLeadTabs()} is the check that stops a pane-placed member
-     * from landing inside a lead's tab in the first place; this check is a second, independent
-     * guard that catches the hazard even when every profile places members correctly, by refusing
-     * a label that a scan would still misread as a lead.
-     *
-     * <p>CB-557 shrank this check rather than removing it. The default template is
-     * {@code "{role}: {profile} #{n}"} and {@code {role}} comes from a closed enum, so a
-     * <em>generated</em> label can no longer collide by construction. What remains checkable is what
-     * an operator still writes by hand: the {@code fleet.tabLabel} template and any per-profile
-     * {@code tabLabel} override.
-     *
-     * <p>Fatal rather than a warning, unlike {@link #warnUnknownTopLevelKeys}: an unknown key means
-     * a feature does nothing, while this means a feature does the opposite of what it says.
-     *
-     * @throws IllegalStateException when the fleet template or any profile's {@code tabLabel}
-     *                               override starts with a configured lead prefix
+     * @throws IllegalStateException when the fleet template or a profile {@code tabLabel} override
+     *                               can render as a configured lead tab or match a lead-tab prefix,
+     *                               or when two {@code fleet.leaders} entries carry the same exact
+     *                               {@code tab} (case-insensitively)
      */
     public void validateLeadTabPrefixes() {
         if (fleet == null || fleet.leaders().isEmpty()) {
@@ -2717,28 +2697,90 @@ public record FleetConfig(
             if (leader == null) {
                 return;
             }
+            String tab = leader.tab();
             String prefix = leader.tabPrefix();
-            // The fleet-wide template is checked once per prefix: it labels every member that has no
-            // override, so one bad template promotes the entire fleet, not one profile.
-            if (startsWithIgnoreCase(fleet.tabLabel(), prefix)) {
+            if (templateCanRenderAs(fleet.tabLabel(), tab)) {
+                bad.add("fleet.tabLabel=\"" + fleet.tabLabel() + "\" can render as the tab of "
+                        + "lead '" + leadName + "' (\"" + tab + "\")");
+            } else if (startsWithIgnoreCase(fleet.tabLabel(), prefix)) {
                 bad.add("fleet.tabLabel=\"" + fleet.tabLabel() + "\" starts with the tabPrefix of "
                         + "lead '" + leadName + "' (\"" + prefix + "\")");
             }
             profiles().entrySet().stream()
-                    .filter(e -> startsWithIgnoreCase(e.getValue().tabLabel(), prefix))
                     .map(Map.Entry::getKey)
                     .sorted()
-                    .forEach(p -> bad.add("profile '" + p + "' overrides tabLabel with \""
-                            + profiles().get(p).tabLabel() + "\", which starts with the tabPrefix of "
-                            + "lead '" + leadName + "' (\"" + prefix + "\")"));
+                    .forEach(p -> {
+                        String label = profiles().get(p).tabLabel();
+                        if (templateCanRenderAs(label, tab)) {
+                            bad.add("profile '" + p + "' overrides tabLabel with \"" + label
+                                    + "\", which can render as the tab of lead '" + leadName
+                                    + "' (\"" + tab + "\")");
+                        } else if (startsWithIgnoreCase(label, prefix)) {
+                            bad.add("profile '" + p + "' overrides tabLabel with \"" + label
+                                    + "\", which starts with the tabPrefix of lead '" + leadName
+                                    + "' (\"" + prefix + "\")");
+                        }
+                    });
         });
-        if (bad.isEmpty()) {
+        if (!bad.isEmpty()) {
+            throw new IllegalStateException("refusing to start: " + String.join("; ", bad)
+                    + ". Every member labelled that way would be read back as a lead and granted "
+                    + "spawn/stop/send on the whole fleet. Change one of the two so member tabs "
+                    + "and lead tabs cannot be confused.");
+        }
+
+        List<String> collisions = new ArrayList<>();
+        List<String> leadNames = fleet.leaders().keySet().stream().sorted().toList();
+        for (int i = 0; i < leadNames.size(); i++) {
+            String nameA = leadNames.get(i);
+            Leader a = fleet.leaders().get(nameA);
+            if (a == null || a.tab() == null || a.tab().isBlank()) {
+                continue;
+            }
+            for (int j = i + 1; j < leadNames.size(); j++) {
+                String nameB = leadNames.get(j);
+                Leader b = fleet.leaders().get(nameB);
+                if (b == null || b.tab() == null || b.tab().isBlank()) {
+                    continue;
+                }
+                if (a.tab().equalsIgnoreCase(b.tab())) {
+                    collisions.add("lead '" + nameA + "' and lead '" + nameB + "' both use tab \""
+                            + a.tab() + "\"");
+                }
+            }
+        }
+        if (collisions.isEmpty()) {
             return;
         }
-        throw new IllegalStateException("refusing to start: " + String.join("; ", bad)
-                + ". Every member labelled that way would be read back as a lead and granted "
-                + "spawn/stop/send on the whole fleet. Change one of the two so member tabs and "
-                + "lead tabs cannot be confused.");
+        throw new IllegalStateException("refusing to start: " + String.join("; ", collisions)
+                + ". Tab identity is matched exactly, so only one of two leads sharing a tab can "
+                + "ever be found — the other is silently unreachable. Give each lead its own "
+                + "exact tab.");
+    }
+
+    private static boolean templateCanRenderAs(String template, String tab) {
+        if (template == null || template.isBlank() || tab == null || tab.isBlank()) {
+            return false;
+        }
+        var placeholders = Pattern.compile("\\{(?:role|profile|model|n)}").matcher(template);
+        StringBuilder expression = new StringBuilder("^");
+        int literalStart = 0;
+        while (placeholders.find()) {
+            expression.append(Pattern.quote(template.substring(literalStart, placeholders.start())));
+            expression.append(".*");
+            literalStart = placeholders.end();
+        }
+        expression.append(Pattern.quote(template.substring(literalStart))).append("$");
+        return Pattern.compile(expression.toString(), Pattern.CASE_INSENSITIVE).matcher(tab).matches();
+    }
+
+    /** Case-insensitive prefix test that tolerates a null or blank label. */
+    private static boolean startsWithIgnoreCase(String label, String prefix) {
+        if (label == null || prefix == null || prefix.isBlank()) {
+            return false;
+        }
+        String stripped = label.strip();
+        return stripped.regionMatches(true, 0, prefix, 0, prefix.length());
     }
 
     /**
@@ -2800,15 +2842,6 @@ public record FleetConfig(
         }
     }
 
-    /** Case-insensitive prefix test that tolerates a null/blank label. */
-    private static boolean startsWithIgnoreCase(String label, String prefix) {
-        if (label == null || prefix == null || prefix.isBlank()) {
-            return false;
-        }
-        String stripped = label.strip();
-        return stripped.regionMatches(true, 0, prefix, 0, prefix.length());
-    }
-
     /**
      * Reject a subscription profile whose {@code env:} block tries to reseat the Anthropic binding
      * (CB-542).

fleetd/src/main/java/dev/ltms/fleet/mcp/FleetMcp.java

@@ -690,7 +690,7 @@ public final class FleetMcp {
             return null; // AuthorizationMode.UNENFORCED: authorization not enforced (fleetd #518)
         }
         if (Authz.permits(caller, action, target)) {
-            if (action != Authz.Action.READ) {
+            if (action != Authz.Action.READ && action != Authz.Action.TASK_READ) {
                 AuditLog.allowed(caller, action, target); // reads would drown the trail
             }
             return null;
@@ -1035,31 +1035,21 @@ public final class FleetMcp {
     }
 
     /**
-     * Which authorization action a {@code fleet_poll} call needs, decided by its arguments
-     * (fleetd #272, widened by fleetd #421).
+     * Which authorization action a {@code fleet_poll} call needs, decided by its arguments.
      *
-     * <p>{@code fleet_poll} is now <strong>three operations behind one tool name</strong>. With
+     * <p>{@code fleet_poll} is <strong>three operations behind one tool name</strong>. With
      * {@code ticket} it observes an async delegation and changes nothing, which is a {@link
-     * Authz.Action#READ}. With {@code target} it calls {@link MessageService#drainReplies} on that
-     * session -- the replies are removed from the inbox and a second call returns nothing -- so it
-     * is a {@link Authz.Action#DRAIN}, the same gate {@code fleet_ack} already uses for removing a
-     * single message, and the same one the REST path uses at {@code FleetApp.drainReplies}. With
-     * {@code coordId} it reads (never acks) this daemon's own held lead-to-lead mail, which is a
-     * {@link Authz.Action#COORD_READ} -- <strong>not</strong> {@code READ}, even though nothing is
-     * consumed: {@code READ}'s grant is open to every authenticated role on the premise that the
-     * roster carries no secrets, and a lead-to-lead body is not the roster. Mapping a non-destructive
-     * peer-mail read to {@code READ} would let any worker read every peer lead's mail in full.
-     *
-     * <p>Before this method existed (fleetd #272) the handler passed a constant {@code READ} for
-     * both of the original branches. {@code READ} is open to every authenticated role, so any
-     * worker could read a peer's id out of {@code fleet_list} and destroy the replies that peer had
-     * queued for the primary. The gate failed open, and it did so because the required action is a
-     * function of the arguments while the handler chose it before looking at them.
+     * Authz.Action#TASK_READ}. With {@code target} it calls {@link MessageService#drainReplies} on
+     * that session -- the replies are removed from the inbox and a second call returns nothing --
+     * so it is a {@link Authz.Action#DRAIN}, the same gate {@code fleet_ack} already uses for
+     * removing a single message, and the same one the REST path uses at
+     * {@code FleetApp.drainReplies}. With {@code coordId} it reads (never acks) this daemon's own
+     * held lead-to-lead mail, which is a {@link Authz.Action#COORD_READ} -- <strong>not</strong>
+     * {@code TASK_READ} or {@code READ}: a lead-to-lead body is a different inbox from either, and
+     * folding it into either would let any worker or architect read every peer lead's mail in full.
      *
      * <p>The choice lives in this method, and not inline in the handler, so that a test can assert
-     * the mapping the handler actually uses. {@code FleetMcpAuthzTest} already checked every
-     * {@link Authz.Action} against every {@link Role} and passed throughout -- it tested the policy
-     * table, which was correct, while the defect was in which action the caller handed it.
+     * the mapping the handler actually uses.
      *
      * <p>Checked first, and exclusively of {@code target}: a call naming {@code coordId} is reading
      * a different inbox entirely (this daemon's own lead channel, never a worker's), so it takes
@@ -1072,7 +1062,30 @@ public final class FleetMcp {
         if (!isBlank(coordId)) {
             return Authz.Action.COORD_READ;
         }
-        return isBlank(target) ? Authz.Action.READ : Authz.Action.DRAIN;
+        return isBlank(target) ? Authz.Action.TASK_READ : Authz.Action.DRAIN;
+    }
+
+    /**
+     * Which authorization action a {@code fleet_send} call needs, decided by its arguments.
+     *
+     * <p>{@code fleet_send} is three call shapes behind one tool name, mirroring {@link
+     * #pollAction}. With {@code coordId} it addresses a peer lead on another daemon over the
+     * coordination broker, which is {@link Authz.Action#COORD_SEND}. With {@code turnId} it
+     * resolves a worker's blocked {@code fleet_ask} and resumes that turn, which is {@link
+     * Authz.Action#ANSWER}. Otherwise it delivers to a local session by {@code sessionId}, which is
+     * the plain {@link Authz.Action#SEND}.
+     *
+     * <p>Checked in the same order the handler branches: {@code coordId} first and exclusively of
+     * {@code turnId}, matching {@link #sendToLead}'s own mutual-exclusion check.
+     *
+     * @param coordId the {@code coordId} argument of the call, or {@code null}/blank when absent
+     * @param turnId  the {@code turnId} argument of the call, or {@code null}/blank when absent
+     */
+    static Authz.Action sendAction(String coordId, String turnId) {
+        if (!isBlank(coordId)) {
+            return Authz.Action.COORD_SEND;
+        }
+        return isBlank(turnId) ? Authz.Action.SEND : Authz.Action.ANSWER;
     }
 
     /**
@@ -1097,10 +1110,11 @@ public final class FleetMcp {
      */
     private static Authz.Action authzAction(FleetTool tool, Map<String, Object> arguments) {
         return switch (tool) {
-            case SEND -> Authz.Action.SEND;
+            case SEND -> sendAction(str(arguments, "coordId"), str(arguments, "turnId"));
             case REPLY -> Authz.Action.REPLY;
             case ASK -> Authz.Action.ASK;
-            case STATUS, LIST, PROFILES, WHOAMI -> Authz.Action.READ;
+            case STATUS -> Authz.Action.TASK_READ;
+            case LIST, PROFILES, WHOAMI -> Authz.Action.READ;
             case POLL -> pollAction(str(arguments, "target"), str(arguments, "coordId"));
             case ACK -> Authz.Action.DRAIN;
             case SPAWN -> Authz.Action.SPAWN;

fleetd/src/main/java/dev/ltms/fleet/rest/FleetApp.java

@@ -49,18 +49,36 @@ import java.util.stream.Collectors;
  */
 public final class FleetApp {
 
-    /** The authorization action the matching route handler hands to {@link #allow}. */
+    /**
+     * The authorization action the matching route handler hands to {@link #allow}, for a route
+     * whose action does not depend on the request body.
+     */
     static Authz.Action routeAction(String route) {
+        return routeAction(route, null);
+    }
+
+    /**
+     * As above, plus the one route whose action depends on the body: {@code POST
+     * /sessions/{id}/message} carries a {@code turnId} (the answer-a-blocked-worker shape) or not
+     * (a plain delivery), mirroring {@code FleetMcp#sendAction}'s split of the same two call
+     * shapes over MCP. {@code turnId} is ignored by every other route.
+     *
+     * @param turnId the request body's {@code turnId}, or {@code null}/blank when absent or not
+     *               applicable to this route
+     */
+    static Authz.Action routeAction(String route, String turnId) {
         return switch (route) {
             case "GET /metrics" -> Authz.Action.METRICS;
             case "POST /members" -> Authz.Action.SPAWN;
             case "DELETE /members/{paneId}" -> Authz.Action.STOP;
-            case "POST /sessions/{id}/message" -> Authz.Action.SEND;
+            case "POST /sessions/{id}/message" -> turnId == null || turnId.isBlank()
+                    ? Authz.Action.SEND : Authz.Action.ANSWER;
             case "POST /sessions/{id}/reply" -> Authz.Action.REPLY;
             case "GET /sessions/{id}/replies" -> Authz.Action.DRAIN;
             case "POST /sessions/{id}/ask" -> Authz.Action.ASK;
             case "GET /sessions", "GET /agents", "GET /members", "GET /profiles",
-                    "GET /member-credentials", "GET /sessions/{id}/status", "GET /tasks/{ticket}" -> Authz.Action.READ;
+                    "GET /member-credentials" -> Authz.Action.READ;
+            case "GET /sessions/{id}/status", "GET /tasks/{ticket}" -> Authz.Action.TASK_READ;
             default -> throw new IllegalArgumentException("route has no authorization gate: " + route);
         };
     }
@@ -250,7 +268,8 @@ public final class FleetApp {
         }
         Principal caller = ctx.attribute(CALLER);
         if (Authz.permits(caller, action, target)) {
-            if (action != Authz.Action.READ && action != Authz.Action.METRICS) {
+            if (action != Authz.Action.READ && action != Authz.Action.METRICS
+                    && action != Authz.Action.TASK_READ) {
                 AuditLog.allowed(caller, action, target); // reads would drown the trail
             }
             return true;
@@ -603,26 +622,33 @@ public final class FleetApp {
      * status-gated injector and block until the worker returns a structured {@code fleet_reply}.
      * Times out with a typed 202 (working / queued / busy) rather than an error — the message may
      * still land.
+     *
+     * <p>Two call shapes share this route, exactly as {@code fleet_send} does over MCP (see
+     * {@code FleetMcp#sendAction}): a plain delivery to {@code id}, and -- when the body carries
+     * {@code turnId} -- resolving a worker's blocked question. The body is parsed before the
+     * authorization check so the right one of {@link Authz.Action#SEND}/{@link Authz.Action#ANSWER}
+     * reaches the gate; a body that fails to parse is treated as the plain shape for that check
+     * alone, and is rejected afterward exactly as before.
      */
     private void sendMessage(Context ctx) {
         String id = ctx.pathParam("id");
-        if (!allow(ctx, routeAction("POST /sessions/{id}/message"), id)) {
+        JsonNode body;
+        try {
+            body = mapper.readTree(ctx.body());
+        } catch (Exception e) {
+            body = null;
+        }
+        String turnId = body == null ? null : body.path("turnId").asText(null);
+        if (!allow(ctx, routeAction("POST /sessions/{id}/message", turnId), id)) {
             return;
         }
-        String content;
-        String turnId;
-        long timeout;
-        boolean wait;
-        try {
-            JsonNode body = mapper.readTree(ctx.body());
-            content = body.path("content").asText("");
-            turnId = body.path("turnId").asText(null);
-            timeout = body.path("timeoutMs").asLong(DEFAULT_MESSAGE_TIMEOUT_MS);
-            wait = body.path("wait").asBoolean(true); // default: block for the reply (CB-104)
-        } catch (Exception e) {
+        if (body == null) {
             ctx.status(400).json(Map.of("error", "bad_request", "detail", "body must be JSON"));
             return;
         }
+        String content = body.path("content").asText("");
+        long timeout = body.path("timeoutMs").asLong(DEFAULT_MESSAGE_TIMEOUT_MS);
+        boolean wait = body.path("wait").asBoolean(true); // default: block for the reply (CB-104)
         if (content.isBlank()) {
             ctx.status(400).json(Map.of("error", "bad_request", "detail", "content is required"));
             return;

fleetd/src/test/java/dev/ltms/fleet/FleetdAssemblyTimingDefaultsTest.java

@@ -0,0 +1,190 @@
+package dev.ltms.fleet;
+
+import dev.ltms.fleet.config.ConfigRef;
+import dev.ltms.fleet.config.FleetConfig;
+import dev.ltms.fleet.guard.SubscriptionGuard;
+import dev.ltms.fleet.herdr.FakeHerdr;
+import dev.ltms.fleet.herdr.HerdrClient;
+import dev.ltms.fleet.inject.Injector;
+import dev.ltms.fleet.inject.StatusPoller;
+import dev.ltms.fleet.msg.LeadChannelHandle;
+import dev.ltms.fleet.msg.LeadCoordLoop;
+import dev.ltms.fleet.msg.LeadMessage;
+import dev.ltms.fleet.msg.ReplyInbox;
+import dev.ltms.fleet.msg.ReplyPushLoop;
+import io.javalin.Javalin;
+import org.junit.jupiter.api.AfterEach;
+import org.junit.jupiter.api.Test;
+import org.junit.jupiter.api.io.TempDir;
+
+import java.lang.reflect.Field;
+import java.nio.file.Files;
+import java.nio.file.Path;
+import java.util.List;
+import java.util.Map;
+import java.util.concurrent.Executors;
+import java.util.concurrent.ScheduledExecutorService;
+import java.util.function.LongSupplier;
+
+import static org.junit.jupiter.api.Assertions.assertEquals;
+import static org.junit.jupiter.api.Assertions.assertNotNull;
+
+/**
+ * Asserts that the assembled loops use the production reminder, coordination, and delivery timing
+ * defaults when no {@code primary:} block configures the reply-push values.
+ */
+class FleetdAssemblyTimingDefaultsTest {
+
+    private static final class FakeLeadChannel implements LeadChannelHandle {
+        @Override
+        public void publish(String toCoordId, LeadMessage message) {
+        }
+
+        @Override
+        public List<LeadMessage> peek() {
+            return List.of();
+        }
+
+        @Override
+        public void ack(String msgId) {
+        }
+
+        @Override
+        public String selfCoordId() {
+            return "test-lead";
+        }
+
+        @Override
+        public boolean heldDurable() {
+            return true;
+        }
+
+        @Override
+        public MailboxState inspect(String coordId) {
+            return MailboxState.unknown(coordId);
+        }
+
+        @Override
+        public void close() {
+        }
+    }
+
+    private static final class TestResourcePorts implements ResourcePorts {
+        final FakeHerdr herdr = new FakeHerdr();
+        Runnable shutdownHook;
+
+        @Override
+        public Map<String, String> environment() {
+            return Map.of();
+        }
+
+        @Override
+        public HerdrClient connectHerdr(Path socketPath) {
+            return herdr;
+        }
+
+        @Override
+        public Fleetd.AmqpOpener replyInboxOpener() {
+            return (uri, prefetch) -> new ReplyInbox() {
+                @Override public void own(String target) { }
+                @Override public void release(String target) { }
+                @Override public void publish(String target, String msgId, String content) { }
+                @Override public List<InboxMessage> peek(String target) { return List.of(); }
+                @Override public boolean ack(String target, String msgId) { return false; }
+            };
+        }
+
+        @Override
+        public Fleetd.LeadMailboxOpener leadMailboxOpener() {
+            return (uri, selfCoordId, prefetch) -> new FakeLeadChannel();
+        }
+
+        @Override
+        public LongSupplier nanoClock() {
+            return System::nanoTime;
+        }
+
+        @Override
+        public LongSupplier wallClockNanos() {
+            return System::nanoTime;
+        }
+
+        @Override
+        public ScheduledExecutorService newScheduler(String purpose) {
+            return Executors.newSingleThreadScheduledExecutor();
+        }
+
+        @Override
+        public void addShutdownHook(Runnable hook) {
+            shutdownHook = hook;
+        }
+
+        @Override
+        public void startHttp(Javalin app, String host, int port) {
+        }
+
+        @Override
+        public Runnable herdrPollWait() {
+            return () -> {
+                throw new UnsupportedOperationException("FakeHerdr is healthy; no poll wait is expected");
+            };
+        }
+    }
+
+    private TestResourcePorts ports;
+
+    @AfterEach
+    void tearDown() {
+        if (ports != null && ports.shutdownHook != null) {
+            ports.shutdownHook.run();
+        }
+    }
+
+    private static FleetConfig writeConfig(Path dir) throws Exception {
+        Path file = dir.resolve("fleetd.yaml");
+        Files.writeString(file, """
+                bind:
+                  host: 127.0.0.1
+                  port: 8765
+                idleSleepGuard:
+                  enabled: false
+                coordinator:
+                  uri: "amqp://fake-lead-broker/vh"
+                  selfId: "test-lead"
+                """);
+        return FleetConfig.load(file);
+    }
+
+    private FleetdRuntime assemble(Path dir) throws Exception {
+        FleetConfig cfg = writeConfig(dir);
+        ports = new TestResourcePorts();
+        return FleetdAssembly.assembleAndStart(new AssemblyInputs(cfg,
+                new ConfigRef(dir.resolve("fleetd.yaml"), cfg), new SubscriptionGuard(cfg.guard().hostSet())), ports);
+    }
+
+    private static long longField(Object target, String name) throws Exception {
+        Field field = target.getClass().getDeclaredField(name);
+        field.setAccessible(true);
+        return field.getLong(target);
+    }
+
+    @Test
+    void productionBootPathUsesTheExpectedLoopTimingDefaults(@TempDir Path dir) throws Exception {
+        FleetdRuntime runtime = assemble(dir);
+
+        ReplyPushLoop pushLoop = runtime.pushLoop();
+        assertEquals(5, longField(pushLoop, "maxReminders"),
+                "without primary:, ReplyPushLoop must stop after five reminder attempts");
+        assertEquals(15_000L, longField(pushLoop, "backoffMs"),
+                "without primary:, ReplyPushLoop must wait fifteen seconds before the next reminder");
+
+        LeadCoordLoop leadCoordLoop = runtime.leadCoordLoop();
+        assertNotNull(leadCoordLoop, "control: coordinator: must build LeadCoordLoop");
+        assertEquals(3_000L, longField(leadCoordLoop, "intervalMs"),
+                "LeadCoordLoop must poll for peer-lead mail every three seconds");
+
+        StatusPoller poller = runtime.poller();
+        assertEquals(Injector.POLL_INTERVAL_MILLIS, longField(poller, "intervalMillis"),
+                "StatusPoller must use Injector's delivery poll interval");
+    }
+}

fleetd/src/test/java/dev/ltms/fleet/auth/AuthzTest.java

@@ -38,6 +38,37 @@ class AuthzTest {
         }
     }
 
+    /**
+     * {@code fleet_send} is three call shapes behind one action name until {@code
+     * FleetMcp#sendAction} picks one: a plain local {@link Authz.Action#SEND}, the {@code coordId}
+     * route ({@link Authz.Action#COORD_SEND}), and the {@code turnId} answer form ({@link
+     * Authz.Action#ANSWER}). All three carry the same grant as the undivided action did — a worker
+     * is excluded from every one, exactly as it was excluded from the one combined action before.
+     */
+    @Test
+    void theThreeSendShapesCarryTheSameGrantAsTheOldUndividedAction() {
+        for (Authz.Action a : new Authz.Action[]{SEND, COORD_SEND, ANSWER}) {
+            assertTrue(Authz.permits(PRIMARY, a, "term_a"), "the primary may " + a);
+            assertTrue(Authz.permits(ARCH_DESIGN, a, "term_a"), "an architect may " + a);
+            assertFalse(Authz.permits(WORKER_A, a, "term_a"),
+                    "a worker performing " + a + " would be escalating into the orchestrator role");
+            assertFalse(Authz.permits(ANON, a, "term_a"));
+        }
+    }
+
+    /**
+     * {@code fleet_poll{ticket}} and {@code fleet_status} are {@link Authz.Action#TASK_READ}, split
+     * out of the roster-only {@link Authz.Action#READ} (fleetd #678). The grant is unchanged from
+     * what the undivided {@code READ} action gave every one of these callers.
+     */
+    @Test
+    void taskReadCarriesTheSameGrantReadDidBeforeTheSplit() {
+        assertTrue(Authz.permits(PRIMARY, TASK_READ, null));
+        assertTrue(Authz.permits(WORKER_A, TASK_READ, null));
+        assertTrue(Authz.permits(ARCH_DESIGN, TASK_READ, null));
+        assertFalse(Authz.permits(ANON, TASK_READ, null));
+    }
+
     @Test
     void aWorkerMayReplyAndAskOnlyAsItself() {
         assertTrue(Authz.permits(WORKER_A, REPLY, "term_a"));

fleetd/src/test/java/dev/ltms/fleet/config/FleetConfigTest.java

@@ -676,12 +676,8 @@ class FleetConfigTest {
         assertEquals(5, hb.quietNudgeCap());
     }
 
-    /**
-     * The hazard the guard exists for: fleetd writes worker tab labels and reads lead tab labels.
-     * Overlap the two and every worker it spawns is read back as a lead.
-     */
     @Test
-    void aLeadPrefixThatAProfileTabLabelOverrideAlsoMatchesRefusesToStart(@TempDir Path dir)
+    void aProfileTabLabelOverrideMatchingALeadTabRefusesToStart(@TempDir Path dir)
             throws Exception {
         Path f = dir.resolve("collide.yaml");
         Files.writeString(f, """
@@ -689,32 +685,33 @@ class FleetConfigTest {
                   port: 8080
                 profiles:
                   gx10:
-                    tabLabel: "lead: {profile} #{n}"
+                    tabLabel: "alpha"
                 fleet:
                   leaders:
                     opus:
-                      tab: "lead: opus"
-                      tabPrefix: "lead:"
+                      tab: "alpha"
                 """);
         FleetConfig cfg = FleetConfig.load(f);
 
         IllegalStateException e =
                 assertThrows(IllegalStateException.class, cfg::validateLeadTabPrefixes);
         assertTrue(e.getMessage().contains("gx10"), "the message must name the offending profile");
+        assertTrue(e.getMessage().contains("alpha"), "the message must name the offending label");
     }
 
-    /** A bad fleet-wide template promotes every member, not one profile — so it is checked too. */
     @Test
-    void aFleetTabLabelThatMatchesALeadPrefixRefusesToStart(@TempDir Path dir) throws Exception {
+    void aFleetTabLabelTemplateThatCanRenderAsALeadTabRefusesToStart(@TempDir Path dir) throws Exception {
         Path f = dir.resolve("collide-template.yaml");
         Files.writeString(f, """
                 bind:
                   port: 8080
+                profiles:
+                  pha: {}
                 fleet:
-                  tabLabel: "lead: {role} {profile}"
+                  tabLabel: "al{profile}"
                   leaders:
                     opus:
-                      tab: "lead: opus"
+                      tab: "alpha"
                 """);
         FleetConfig cfg = FleetConfig.load(f);
 
@@ -723,12 +720,28 @@ class FleetConfigTest {
         assertTrue(e.getMessage().contains("fleet.tabLabel"));
     }
 
-    /**
-     * The point of making role the label's first field: {@code {role}} comes from a closed enum, so
-     * a generated label cannot begin with {@code "lead:"} however the fleet is configured.
-     */
     @Test
-    void theDefaultTabLabelCannotCollideWithTheDefaultLeadPrefix(@TempDir Path dir) throws Exception {
+    void anExactFleetTabLabelCollisionRefusesToStart(@TempDir Path dir) throws Exception {
+        Path f = dir.resolve("exact-tab-collision.yaml");
+        Files.writeString(f, """
+                bind:
+                  port: 8080
+                fleet:
+                  tabLabel: "alpha"
+                  leaders:
+                    alpha:
+                      tab: "alpha"
+                """);
+
+        IllegalStateException e = assertThrows(IllegalStateException.class,
+                () -> FleetConfig.load(f).validateAll());
+        assertTrue(e.getMessage().contains("fleet.tabLabel"),
+                "the message must name the offending label");
+        assertTrue(e.getMessage().contains("alpha"), "the message must name the colliding lead tab");
+    }
+
+    @Test
+    void aFleetTabLabelTemplateThatCannotRenderAsALeadTabIsAllowed(@TempDir Path dir) throws Exception {
         Path f = dir.resolve("ok.yaml");
         Files.writeString(f, """
                 bind:
@@ -737,17 +750,13 @@ class FleetConfigTest {
                   gx10:
                     baseUrl: http://gx00.gw:8000
                 fleet:
+                  tabLabel: "worker-{profile}"
                   leaders:
                     opus:
-                      tab: "lead: opus"
+                      tab: "alpha"
                 """);
 
-        assertDoesNotThrow(() -> FleetConfig.load(f).validateLeadTabPrefixes());
-        for (MemberRole role : MemberRole.values()) {
-            assertFalse(FleetConfig.Fleet.DEFAULT_TAB_LABEL
-                            .replace("{role}", role.wireName()).startsWith("lead:"),
-                    "no role renders a label that reads as a lead");
-        }
+        assertDoesNotThrow(() -> FleetConfig.load(f).validateAll());
     }
 
     @Test
@@ -765,6 +774,78 @@ class FleetConfigTest {
                 "a label that collides with a convention nobody reads is not a problem");
     }
 
+    /**
+     * fleetd #677: identity is matched on a lead's exact {@code tab} alone, so two leads sharing
+     * one tab means only one of them is ever found — the guard must catch this independently of
+     * the member-template checks above.
+     */
+    @Test
+    void twoLeadsSharingTheSameExactTabRefusesToStart(@TempDir Path dir) throws Exception {
+        Path f = dir.resolve("shared-tab.yaml");
+        Files.writeString(f, """
+                bind:
+                  port: 8080
+                fleet:
+                  leaders:
+                    opus:
+                      tab: "shared tab"
+                    sonnet:
+                      tab: "shared tab"
+                """);
+        FleetConfig cfg = FleetConfig.load(f);
+
+        IllegalStateException e =
+                assertThrows(IllegalStateException.class, cfg::validateLeadTabPrefixes);
+        assertTrue(e.getMessage().contains("opus"), "the message must name one offending lead");
+        assertTrue(e.getMessage().contains("sonnet"), "the message must name the other offending lead");
+    }
+
+    /**
+     * fleetd #693: the guard matches tabs case-insensitively, because
+     * {@code LeadTabScanner} keys its tab map on a lowercased label — two tabs differing only in
+     * case collide there too, and the guard must catch that independently of the exact-match case
+     * above.
+     */
+    @Test
+    void twoLeadsSharingTheSameTabInDifferentCaseRefusesToStart(@TempDir Path dir) throws Exception {
+        Path f = dir.resolve("shared-tab-case.yaml");
+        Files.writeString(f, """
+                bind:
+                  port: 8080
+                fleet:
+                  leaders:
+                    opus:
+                      tab: "Shared Tab"
+                    sonnet:
+                      tab: "shared tab"
+                """);
+        FleetConfig cfg = FleetConfig.load(f);
+
+        IllegalStateException e =
+                assertThrows(IllegalStateException.class, cfg::validateLeadTabPrefixes);
+        assertTrue(e.getMessage().contains("opus"), "the message must name one offending lead");
+        assertTrue(e.getMessage().contains("sonnet"), "the message must name the other offending lead");
+    }
+
+    /** Control for {@link #twoLeadsSharingTheSameExactTabRefusesToStart}: distinct tabs load cleanly. */
+    @Test
+    void twoLeadsWithDistinctExactTabsAreAllowed(@TempDir Path dir) throws Exception {
+        Path f = dir.resolve("distinct-tabs.yaml");
+        Files.writeString(f, """
+                bind:
+                  port: 8080
+                fleet:
+                  leaders:
+                    opus:
+                      tab: "opus tab"
+                    sonnet:
+                      tab: "sonnet tab"
+                """);
+        FleetConfig cfg = FleetConfig.load(f);
+
+        assertDoesNotThrow(cfg::validateLeadTabPrefixes);
+    }
+
     // ── validatePanePlacementAgainstLeadTabs ────────────────────────────────────────────────────
 
     /**

fleetd/src/test/java/dev/ltms/fleet/config/FleetConfigValidateAllTest.java

@@ -17,63 +17,21 @@ import static org.junit.jupiter.api.Assertions.assertThrows;
 import static org.junit.jupiter.api.Assertions.assertTrue;
 
 /**
- * The gap this class exists to close: mutation testing on the fleetd ticket "central allow-list
- * of usable models" found that although {@link FleetConfig#validateModels()}'s own logic was well
- * pinned, nothing proved either real caller ({@code Fleetd.main} and {@link ConfigRef#reload()})
- * still invoked it — deleting the call site left the full suite green (1478/0/0/0). A follow-up
- * measurement (same technique — remove one call site, run the suite, not read the code) found the
- * SAME gap for all five of {@link FleetConfig}'s other validators at startup, and for four of the
- * six inside {@link ConfigRef#reload()}. This is a class of gap, not one line's mistake: every one
- * of those thirteen tests called the validator itself directly, never the real caller that was
- * supposed to.
+ * Tests the reflective validator sweep and {@link FleetConfig#validateAll()} reachability.
  *
- * <p>The fix replaces the six individual {@code cfg.validateXxx()} calls at each of the two real
- * call sites with one {@link FleetConfig#validateAll()}, which reaches every validator by
- * reflection rather than by a hand-maintained list of names. A hand-maintained list of six names
- * would have exactly the defect it replaces: the seventh validator someone adds next month has no
- * reason to be added to it, and nothing would say so. This class proves TWO separate claims, and
- * keeps them separate on purpose:
- *
- * <ol>
- *   <li>{@link #theSweepMechanismIsGenericNotHardcodedToFleetConfigsSixNames()} and its neighbours
- *       prove the reflective sweep itself ({@link FleetConfig#invokeAllValidators}) is a general
- *       mechanism — it runs whatever public, no-arg, void {@code validateXxx()} methods a class
- *       happens to declare today, including a class with more of them than {@link FleetConfig}
- *       has right now. This is the proof that a future, real seventh validator on {@link
- *       FleetConfig} would be swept automatically, without needing to add a real (unwanted)
- *       seventh validator just to exercise the claim.</li>
- *   <li>{@link #validateAllReachesEveryOneOfTodaysRealValidators()} proves {@link
- *       FleetConfig#validateAll()} itself is wired to that same generic mechanism and genuinely
- *       reaches every one of today's real validators — reusing the exact minimal failing
- *       configurations {@code FleetConfigTest} already established for each one directly, plus a
- *       dedicated fixture for {@link FleetConfig#validateLeadRollover()}, which no other test
- *       drives through {@code validateAll()} — so a single call to {@code validateAll()} is shown
- *       to reproduce every one of those failures.</li>
- * </ol>
- *
- * <p>Together with the direct-{@code Fleetd.main}-invocation tests in {@code
- * FleetdStartupValidationTest} (which prove the real startup call site still calls {@code
- * validateAll()}) and the {@code ConfigRefTest} reload tests (which prove the same for {@link
- * ConfigRef#reload()}), removing {@code cfg.validateAll();} from either real call site now fails
- * a test in this module.
- *
- * <p><b>What is NOT pinned, measured rather than assumed.</b> Reverting {@link
- * FleetConfig#validateAll()} to a hardcoded list of today's method calls leaves the whole
- * suite green. Nothing ties {@code validateAll()} to
- * the generic sweep — claim 1 proves {@link FleetConfig#invokeAllValidators} is generic, and claim
- * 2 proves {@code validateAll()} reaches today's validators, and a hardcoded list satisfies both. So the
- * reflective sweep is a convenience, not the guarantee. The guarantee is {@link
- * #fleetConfigDeclaresExactlyTheseValidatorsToday()}: it fails the moment any validator is added
- * or removed, which forces whoever changes the set to look at this file.
+ * <p>{@link #theSweepRunsEveryValidateMethodOnAnUnrelatedClass()} and its neighbours
+ * prove that {@link FleetConfig#invokeAllValidators} runs each public, no-arg, void
+ * {@code validateXxx()} method on its target. {@link #fleetConfigDeclaresExactlyTheseValidatorsToday()}
+ * is the canary for the validator set. {@link #validateAllReachesEveryOneOfTodaysRealValidators()}
+ * is the reachability check for that set.
  */
 class FleetConfigValidateAllTest {
 
-    // ── Claim 1: the reflective sweep is a general mechanism, not six names in disguise ──────────
+    // ── Claim 1: the reflective sweep is a general mechanism ─────────────────────────────────────
 
     /**
-     * A throwaway fixture class, unrelated to {@link FleetConfig} in every way except shape: three
-     * public, no-arg, void methods named {@code validateXxx}. Proves the sweep works on ANY class
-     * with this shape, not on something special-cased to {@link FleetConfig}.
+     * Fixture with public, no-arg, void methods named {@code validateXxx}. It proves the sweep uses
+     * the target's method shape rather than special handling for {@link FleetConfig}.
      */
     static class ThreeValidators {
         final List<String> ran = new ArrayList<>();
@@ -92,7 +50,7 @@ class FleetConfigValidateAllTest {
     }
 
     @Test
-    void theSweepMechanismIsGenericNotHardcodedToFleetConfigsSixNames() {
+    void theSweepRunsEveryValidateMethodOnAnUnrelatedClass() {
         ThreeValidators target = new ThreeValidators();
         FleetConfig.invokeAllValidators(target);
         assertEquals(List.of("validateAlpha", "validateBeta", "validateGamma"), target.ran,
@@ -102,12 +60,8 @@ class FleetConfigValidateAllTest {
     }
 
     /**
-     * The core of the "self-maintaining" requirement: the exact same class shape as {@link
-     * ThreeValidators}, plus one more method — standing in for "a developer adds a validator next
-     * month". Nothing about the sweep changes to pick it up; the new method is invoked purely
-     * because it exists and matches the shape. This is what makes adding a seventh real validator
-     * to {@link FleetConfig} safe without touching {@link FleetConfig#validateAll()} or either
-     * call site — there is no "wire it in" step left to forget.
+     * Fixture with an added valid method. It proves the sweep reaches a method because it matches
+     * the validator shape.
      */
     static class FourValidators {
         final List<String> ran = new ArrayList<>();
@@ -135,7 +89,7 @@ class FleetConfigValidateAllTest {
         FleetConfig.invokeAllValidators(target);
         assertEquals(List.of("validateAlpha", "validateBeta", "validateDelta", "validateGamma"),
                 sorted(target.ran),
-                "the fourth method must be reached automatically — proving a class can grow the "
+                "the added method must be reached automatically — proving a class can grow the "
                         + "set of things it validates with no change to the sweep itself");
     }
 
@@ -297,16 +251,16 @@ class FleetConfigValidateAllTest {
                   port: 8765
                 """, "auth.mode: token");
 
-        // validateLeadTabPrefixes: a fleet-wide tabLabel that starts with a lead's own tabPrefix.
+        // validateLeadTabPrefixes: a fleet-wide tabLabel that equals a lead tab.
         assertValidateAllRefuses(dir, "lead-tab-prefixes.yaml", """
                 bind:
                   host: 127.0.0.1
                   port: 8765
                 fleet:
-                  tabLabel: "lead: {role} {profile}"
+                  tabLabel: "alpha"
                   leaders:
                     opus:
-                      tab: "lead: opus"
+                      tab: "alpha"
                 """, "fleet.tabLabel");
 
         // validateSubscriptionProfiles: subscription: true with env: reseating ANTHROPIC_BASE_URL.

fleetd/src/test/java/dev/ltms/fleet/mcp/FleetMcpAuthzTest.java

@@ -156,6 +156,45 @@ class FleetMcpAuthzTest {
         }
     }
 
+    /**
+     * fleetd #669 Unit A: {@code SEND} is split into three actions ({@link Authz.Action#SEND},
+     * {@link Authz.Action#COORD_SEND}, {@link Authz.Action#ANSWER}), each carrying the same grant
+     * the one undivided action gave. An architect holds all three, exactly as it held the one.
+     */
+    @Test
+    void anArchitectMayUseAllThreeSendShapesOverMcp() {
+        FleetMcp m = mcp(true);
+        for (Authz.Action a : new Authz.Action[]{Authz.Action.SEND, Authz.Action.COORD_SEND,
+                Authz.Action.ANSWER}) {
+            assertNull(m.denyFor(ARCH_DESIGN, a, "term_a"),
+                    a + " carries the same grant the undivided SEND action gave an architect");
+        }
+    }
+
+    /** The other half of the same split: a worker is excluded from all three, as it was from one. */
+    @Test
+    void aWorkerMayNotUseAnySendShapeOverMcp() {
+        FleetMcp m = mcp(true);
+        for (Authz.Action a : new Authz.Action[]{Authz.Action.SEND, Authz.Action.COORD_SEND,
+                Authz.Action.ANSWER}) {
+            McpSchema.CallToolResult denied = m.denyFor(WORKER_A, a, "term_a");
+            assertNotNull(denied, a + " must stay refused to a worker");
+            assertTrue(denied.isError(), "a refusal is returned as an MCP tool error");
+        }
+    }
+
+    /**
+     * fleetd #669 Unit A / #678: {@code TASK_READ} (ticket polling, session status) is split out of
+     * the roster-only {@code READ}, carrying forward the grant the undivided action gave. A worker
+     * still has both — it never gained or lost anything by the split.
+     */
+    @Test
+    void aWorkerKeepsBothReadActionsAfterTheSplit() {
+        FleetMcp m = mcp(true);
+        assertNull(m.denyFor(WORKER_A, Authz.Action.READ, null));
+        assertNull(m.denyFor(WORKER_A, Authz.Action.TASK_READ, null));
+    }
+
     @Test
     void anArchitectMayReplyAndAskOnlyAsItsOwnPaneOverMcp() {
         FleetMcp m = mcp(true);
@@ -297,35 +336,53 @@ class FleetMcpAuthzTest {
      * the whole time the defect was live -- the table was right, the action fed to it was wrong.
      */
     @Test
-    void pollingByTargetIsADrainAndPollingByTicketIsARead() {
+    void pollingByTargetIsADrainAndPollingByTicketIsATaskRead() {
         assertEquals(Authz.Action.DRAIN, FleetMcp.pollAction("term_b", null),
                 "poll by target removes the replies — that is a drain, not an observation");
-        assertEquals(Authz.Action.READ, FleetMcp.pollAction(null, null),
-                "poll by ticket changes nothing");
-        assertEquals(Authz.Action.READ, FleetMcp.pollAction("  ", null),
+        assertEquals(Authz.Action.TASK_READ, FleetMcp.pollAction(null, null),
+                "poll by ticket changes nothing, but is not the roster-only READ action");
+        assertEquals(Authz.Action.TASK_READ, FleetMcp.pollAction("  ", null),
                 "a blank target is an absent target");
     }
 
     /**
      * fleetd #421: a coordId branch is a THIRD operation behind fleet_poll's one name, and it must
-     * map to {@link Authz.Action#COORD_READ} — never {@link Authz.Action#READ}, even though this
-     * branch also consumes nothing. READ's grant is open to every authenticated role on the premise
-     * that the roster carries no secrets; a lead-to-lead body is not the roster, so folding this
-     * branch into READ would let any worker read every peer lead's mail in full. coordId also takes
-     * priority over target when both happen to be present — it addresses a different inbox entirely.
+     * map to {@link Authz.Action#COORD_READ} — never {@link Authz.Action#READ} or {@link
+     * Authz.Action#TASK_READ}, even though this branch also consumes nothing. A lead-to-lead body
+     * is not the roster and not a ticket/status read, so folding this branch into either would let
+     * any worker or architect read every peer lead's mail in full. coordId also takes priority over
+     * target when both happen to be present — it addresses a different inbox entirely.
      */
     @Test
-    void pollingByCoordIdIsACoordReadNeverAPlainRead() {
+    void pollingByCoordIdIsACoordReadNeverAPlainOrTaskRead() {
         assertEquals(Authz.Action.COORD_READ, FleetMcp.pollAction(null, "mac-opus"),
-                "reading held peer mail must not be mapped to the everyone-readable READ action");
+                "reading held peer mail must not be mapped to a widely-readable action");
         assertEquals(Authz.Action.COORD_READ, FleetMcp.pollAction("  ", "mac-opus"),
                 "a blank target must not fall through to READ/DRAIN when coordId is present");
-        assertEquals(Authz.Action.READ, FleetMcp.pollAction(null, "  "),
+        assertEquals(Authz.Action.TASK_READ, FleetMcp.pollAction(null, "  "),
                 "a blank coordId is an absent coordId, same as target/ticket");
         assertEquals(Authz.Action.COORD_READ, FleetMcp.pollAction("term_b", "mac-opus"),
                 "coordId takes priority over target — this is a different inbox, not a drain");
     }
 
+    /**
+     * {@code fleet_send} is three call shapes behind one tool name, exactly as {@code fleet_poll}
+     * is (fleetd #669 Unit A). {@link FleetMcp#sendAction} picks the action from the arguments, not
+     * the handler, for the same reason {@link FleetMcp#pollAction} does: a test can assert the
+     * mapping the handler actually uses.
+     */
+    @Test
+    void sendMapsToThreeDifferentActionsByItsArguments() {
+        assertEquals(Authz.Action.SEND, FleetMcp.sendAction(null, null),
+                "a plain delivery, with neither coordId nor turnId, is a local SEND");
+        assertEquals(Authz.Action.COORD_SEND, FleetMcp.sendAction("mac-opus", null),
+                "coordId addresses a peer lead over the coordination broker");
+        assertEquals(Authz.Action.ANSWER, FleetMcp.sendAction(null, "turn-1"),
+                "turnId resolves a worker's blocked question");
+        assertEquals(Authz.Action.COORD_SEND, FleetMcp.sendAction("mac-opus", "turn-1"),
+                "coordId takes priority over turnId, mirroring sendToLead's own mutual-exclusion check");
+    }
+
     @Test
     void everyRegisteredToolHasItsHandlerActionPinned() {
         // fleetd #469: this used to scrape FleetMcp.java's tool("…") calls for the registered set —
@@ -344,16 +401,22 @@ class FleetMcpAuthzTest {
                 () -> tool + " is registered but has no pinned authorization action"));
 
         assertEquals(Authz.Action.SEND, FleetMcp.toolAction("fleet_send", Map.of()));
+        assertEquals(Authz.Action.SEND,
+                FleetMcp.toolAction("fleet_send", Map.of("sessionId", "term_a", "content", "hi")));
+        assertEquals(Authz.Action.COORD_SEND,
+                FleetMcp.toolAction("fleet_send", Map.of("coordId", "mac-opus", "content", "hi")));
+        assertEquals(Authz.Action.ANSWER,
+                FleetMcp.toolAction("fleet_send", Map.of("turnId", "turn-1", "content", "hi")));
         assertEquals(Authz.Action.REPLY, FleetMcp.toolAction("fleet_reply", Map.of()));
         assertEquals(Authz.Action.ASK, FleetMcp.toolAction("fleet_ask", Map.of()));
-        assertEquals(Authz.Action.READ, FleetMcp.toolAction("fleet_status", Map.of()));
+        assertEquals(Authz.Action.TASK_READ, FleetMcp.toolAction("fleet_status", Map.of()));
         assertEquals(Authz.Action.DRAIN, FleetMcp.toolAction("fleet_ack", Map.of()));
         assertEquals(Authz.Action.SPAWN, FleetMcp.toolAction("fleet_spawn", Map.of()));
         assertEquals(Authz.Action.READ, FleetMcp.toolAction("fleet_list", Map.of()));
         assertEquals(Authz.Action.STOP, FleetMcp.toolAction("fleet_stop", Map.of()));
         assertEquals(Authz.Action.READ, FleetMcp.toolAction("fleet_profiles", Map.of()));
         assertEquals(Authz.Action.READ, FleetMcp.toolAction("fleet_whoami", Map.of()));
-        assertEquals(Authz.Action.READ, FleetMcp.toolAction("fleet_poll", Map.of("ticket", "task")));
+        assertEquals(Authz.Action.TASK_READ, FleetMcp.toolAction("fleet_poll", Map.of("ticket", "task")));
         assertEquals(Authz.Action.DRAIN, FleetMcp.toolAction("fleet_poll", Map.of("target", "term_b")));
         assertEquals(Authz.Action.COORD_READ,
                 FleetMcp.toolAction("fleet_poll", Map.of("coordId", "mac-opus")));

fleetd/src/test/java/dev/ltms/fleet/msg/MessageServiceTest.java

@@ -60,13 +60,25 @@ class MessageServiceTest {
         inbox.own(T);
     }
 
+    /**
+     * A send budget large enough that a test's own setup — {@link #awaitWaiting()} plus whatever
+     * status transitions it drives afterward — can never compete with it for the same clock. A test
+     * that needs {@code send.get(...)}'s own window to be the only timing bound it depends on uses
+     * {@link #sendAsync(String, long)} with this value instead of the default 5000 ms.
+     */
+    private static final long GENEROUS_SEND_BUDGET_MILLIS = 30_000;
+
     /** Run {@code send} on a background thread; the current thread drives the worker's turn. */
     private CompletableFuture<MessageService.Reply> sendAsync() {
         return sendAsync("do the task");
     }
 
     private CompletableFuture<MessageService.Reply> sendAsync(String content) {
-        return CompletableFuture.supplyAsync(() -> messages.send(T, content, 5000));
+        return sendAsync(content, 5000);
+    }
+
+    private CompletableFuture<MessageService.Reply> sendAsync(String content, long timeoutMillis) {
+        return CompletableFuture.supplyAsync(() -> messages.send(T, content, timeoutMillis));
     }
 
     private void awaitWaiting() throws InterruptedException {
@@ -80,7 +92,7 @@ class MessageServiceTest {
 
     @Test
     void completionFallbackResolvesATurnThatNeverCalledFleetReply() throws Exception {
-        CompletableFuture<MessageService.Reply> send = sendAsync();
+        CompletableFuture<MessageService.Reply> send = sendAsync("do the task", GENEROUS_SEND_BUDGET_MILLIS);
         awaitWaiting();
 
         herdr.readText("$ prompt");                // pre-turn pane: no answer yet (baseline reference)
@@ -96,6 +108,32 @@ class MessageServiceTest {
         assertTrue(reply.completed(), "a scraped completion still counts as completed");
     }
 
+    /**
+     * Pins {@link #GENEROUS_SEND_BUDGET_MILLIS} as the budget {@link
+     * #completionFallbackResolvesATurnThatNeverCalledFleetReply} depends on. A 5500 ms delay between
+     * {@link #awaitWaiting()} and the status transitions that drive completion stands in for a loaded
+     * machine's setup overhead — comfortably past the 5000 ms budget this send no longer uses, and
+     * still well inside this method's own 30 000 ms budget. The only clock this test depends on is
+     * {@code send.get}'s own 10 s window.
+     */
+    @Test
+    void completionFallbackSurvivesASlowHarnessBecauseItsSendBudgetIsNotTheBindingClock() throws Exception {
+        CompletableFuture<MessageService.Reply> send = sendAsync("do the task", GENEROUS_SEND_BUDGET_MILLIS);
+        awaitWaiting();
+
+        Thread.sleep(5500);
+
+        herdr.readText("$ prompt");
+        injector.onStatus(T, AgentStatus.IDLE);
+        injector.onStatus(T, AgentStatus.WORKING);
+        herdr.readText("BUILD GREEN: 391 files");
+        injector.onStatus(T, AgentStatus.IDLE);
+
+        MessageService.Reply reply = send.get(10, TimeUnit.SECONDS);
+        assertEquals(MessageService.Outcome.COMPLETED_UNREPLIED, reply.outcome(),
+                "a slow harness must not be mistaken for a timed-out delivery");
+    }
+
     @Test
     void completionFallbackReplacesAnEchoedInjectedBriefWithNoReportOutcome() throws Exception {
         String brief = "Implement the requested change. ".repeat(20);

fleetd/src/test/java/dev/ltms/fleet/rest/FleetAppAuthTest.java

@@ -122,12 +122,28 @@ class FleetAppAuthTest {
         assertEquals(Authz.Action.DRAIN, FleetApp.routeAction("GET /sessions/{id}/replies"));
         assertEquals(Authz.Action.ASK, FleetApp.routeAction("POST /sessions/{id}/ask"));
         for (String route : Set.of("GET /sessions", "GET /agents", "GET /members", "GET /profiles",
-                "GET /member-credentials", "GET /sessions/{id}/status", "GET /tasks/{ticket}")) {
+                "GET /member-credentials")) {
             assertEquals(Authz.Action.READ, FleetApp.routeAction(route), route);
         }
+        for (String route : Set.of("GET /sessions/{id}/status", "GET /tasks/{ticket}")) {
+            assertEquals(Authz.Action.TASK_READ, FleetApp.routeAction(route), route);
+        }
         assertThrows(IllegalArgumentException.class, () -> FleetApp.routeAction("GET /healthz"));
     }
 
+    /**
+     * fleetd #669 Unit A: {@code POST /sessions/{id}/message} is two call shapes behind one route,
+     * mirroring {@code fleet_send}'s MCP-side split into {@link Authz.Action#SEND} and {@link
+     * Authz.Action#ANSWER} ({@code FleetMcp#sendAction}). The route never carries a {@code coordId}
+     * shape — that peer-lead route is MCP-only — so only these two apply here.
+     */
+    @Test
+    void theMessageRouteIsASendWithNoTurnIdAndAnAnswerWithOne() {
+        assertEquals(Authz.Action.SEND, FleetApp.routeAction("POST /sessions/{id}/message", null));
+        assertEquals(Authz.Action.SEND, FleetApp.routeAction("POST /sessions/{id}/message", "  "));
+        assertEquals(Authz.Action.ANSWER, FleetApp.routeAction("POST /sessions/{id}/message", "turn-1"));
+    }
+
     private static Set<String> routesTheServerRegisters() {
         try {
             String source = Files.readString(REST_SOURCE).lines()
@@ -192,6 +208,21 @@ class FleetAppAuthTest {
                 "draining an inbox is the primary's collection step");
     }
 
+    /**
+     * fleetd #669 Unit A: the {@code turnId} shape of {@code POST /sessions/{id}/message} maps to
+     * {@link Authz.Action#ANSWER}, not the plain {@link Authz.Action#SEND} the test above drives —
+     * a worker must stay refused on this shape too, exactly as it was refused on the one undivided
+     * action before the split.
+     */
+    @Test
+    void aWorkerMayNotAnswerAnotherSessionsBlockedQuestionOverRest() throws Exception {
+        int port = start(FakeHerdr.WORKER_PID, false, null);
+
+        assertEquals(403, send(port, "POST", "/sessions/term_b/message",
+                "{\"turnId\":\"turn-1\",\"content\":\"hi\"}", null).statusCode(),
+                "resolving another session's blocked question would be a worker escalating too");
+    }
+
     // --- token mode ---------------------------------------------------------------------------
 
     @Test

scripts/config-edit.sh

@@ -580,6 +580,12 @@ install_candidate() {
 
 # -------------------------------------------------------------------------------- the report path
 #
+# Masks basic-auth userinfo (scheme://user:pass@host) in a daemon verdict line before it reaches
+# the terminal.
+mask_verdict_userinfo() {
+  printf '%s\n' "$1" | sed -E 's#://[^@/[:space:]]*@#://<redacted>@#g'
+}
+
 # Prints the literal command the operator (or a test) can run to restore the backup by hand — the
 # absolute path to THIS script plus the overrides actually in force, so it works from any cwd.
 restore_command_line() {
@@ -599,8 +605,8 @@ restore_and_confirm() {
   ok "restored from $backup"
   if wait_for_verdict "$LOG" "$mark2" "$WAIT_SECONDS"; then
     case "$VERDICT_KIND" in
-      refused) warn "the RESTORE was also refused by the daemon: $VERDICT_LINE" ;;
-      *)       ok "restore confirmed: $VERDICT_LINE" ;;
+      refused) warn "the RESTORE was also refused by the daemon: $(mask_verdict_userinfo "$VERDICT_LINE")" ;;
+      *)       ok "restore confirmed: $(mask_verdict_userinfo "$VERDICT_LINE")" ;;
     esac
   else
     warn "the restore is on disk, but no confirming verdict line appeared within ${WAIT_SECONDS}s"
@@ -616,7 +622,7 @@ report_outcome() {
 
   say "waiting for the daemon's verdict (up to ${WAIT_SECONDS}s)"
   if wait_for_verdict "$LOG" "$mark" "$WAIT_SECONDS"; then
-    kind="$VERDICT_KIND"; line="$VERDICT_LINE"
+    kind="$VERDICT_KIND"; line="$(mask_verdict_userinfo "$VERDICT_LINE")"
   else
     kind="none"
   fi
@@ -673,7 +679,7 @@ check_mode() {
   local verdict
   verdict="$(last_verdict_line "$LOG")"
   if [ -n "$verdict" ]; then
-    ok "last verdict in log: $verdict"
+    ok "last verdict in log: $(mask_verdict_userinfo "$verdict")"
   else
     warn "no reload verdict line found in $LOG"
   fi

scripts/redeploy-fleetd.sh

@@ -81,11 +81,12 @@ MODULE="$REPO/fleetd"
 BUILD_JAR="$MODULE/target/fleetd.jar"
 JAR="$MODULE/run/fleetd.jar"
 OUT="$MODULE/fleetd.out"
-# Matches BOTH the absolute form and the relative `java -jar run/fleetd.jar` a hand-start
-# produces from inside fleetd/. Anchoring on the absolute path alone was a real bug: the daemon
-# restarted correctly and the script still reported "no process appeared", because it launched with
-# a relative path and then looked for an absolute one.
-PATTERN='run/fleetd.jar'
+# Matches a fleetd daemon's command line wherever its jar sits — absolute or relative, under
+# run/, under target/, or anywhere else a build or a hand-start might point it. Detecting a
+# daemon this script did not start, including one running from a jar outside $JAR's own
+# directory, is this pattern's whole job; running_pid()'s `comm = java` allowlist below is what
+# keeps that breadth from counting a shell that merely types the pattern as literal text.
+PATTERN='fleetd.jar'
 HEALTH='http://127.0.0.1:8765/healthz'
 STOP_WAIT=30      # seconds to wait for a clean exit before reporting failure
 HEALTH_WAIT=60    # seconds to wait for /healthz to answer after start — fleetd #603: also the pid-
@@ -231,7 +232,7 @@ report_jar_state() {
 # launched as `java -jar ...` — a native image, a renamed launcher — `running_pid()` silently
 # returns nothing and `assert_single_daemon` stops noticing a second daemon at all. For a guard,
 # that false-negative direction is the worse one to be wrong in. This is not a new assumption,
-# though: `PATTERN='run/fleetd.jar'` two lines up already assumes the daemon is a jar, which
+# though: `PATTERN='fleetd.jar'` two lines up already assumes the daemon is a jar, which
 # is only ever run by `java`. If that launch method changes, `PATTERN` stops matching anything
 # before this allowlist would ever get the chance to be wrong — the allowlist rides on the same
 # assumption that is already load-bearing, it does not add a new one. Whoever changes the launch
@@ -627,6 +628,45 @@ check_log_path_matches_plist() {
   ok "log path check: script and plist agree ($resolved_out)"
 }
 
+# Reads the launchd plist's ProgramArguments for the argument that follows "-jar", resolves it
+# alongside $jar_path, and dies when the two differ. Call it only when the agent is loaded; it
+# never touches launchd or the daemon itself.
+check_jar_path_matches_plist() {
+  local jar_path="$1" plist_path="$2"
+  local plist_args plist_jar resolved_jar resolved_plist_jar
+  if ! plist_args="$(/usr/libexec/PlistBuddy -c 'Print :ProgramArguments' "$plist_path" 2>/dev/null)"; then
+    die "launchd agent is loaded but PlistBuddy could not read ProgramArguments from
+        $plist_path
+      — cannot verify which jar the supervised daemon launches. Fix the plist before
+      redeploying supervised."
+  fi
+  plist_jar="$(printf '%s\n' "$plist_args" | awk '
+      { gsub(/^[ \t]+|[ \t]+$/, "") }
+      prev == "-jar" { print; exit }
+      { prev = $0 }
+    ')"
+  if [ -z "$plist_jar" ]; then
+    die "launchd agent is loaded but its ProgramArguments at
+        $plist_path
+      do not contain a '-jar <path>' pair — cannot verify which jar the supervised daemon
+      launches. Fix the plist before redeploying supervised."
+  fi
+  resolved_jar="$(cd "$(dirname "$jar_path")" 2>/dev/null && pwd -P)/$(basename "$jar_path")" || true
+  resolved_plist_jar="$(cd "$(dirname "$plist_jar")" 2>/dev/null && pwd -P)/$(basename "$plist_jar")" || true
+  if [ -z "$resolved_jar" ] || [ -z "$resolved_plist_jar" ] || [ "$resolved_jar" != "$resolved_plist_jar" ]; then
+    die "jar path mismatch — this script deploys to
+        $jar_path  (resolved: ${resolved_jar:-<directory does not exist>})
+      but the loaded plist's ProgramArguments names
+        $plist_jar  (resolved: ${resolved_plist_jar:-<directory does not exist>})
+      The swap renames the built jar into place, so the old path stops existing after a redeploy;
+      a launchd-initiated start from this plist (a reboot, or KeepAlive after a crash) would then
+      run java against a missing file. Reinstall the plist at
+        $plist_path
+      so its ProgramArguments names $jar_path before redeploying supervised."
+  fi
+  ok "jar path check: script and plist agree ($resolved_jar)"
+}
+
 # fleetd #552: the post-restart fresh-log capture, pulled out of the main flow so it is testable by
 # sourcing (the same reason systemd_installed/systemd_loaded above guard their OWN mktemp inline
 # instead of leaving it bare) even though its only caller sits below the SOURCED guard. By the time
@@ -960,6 +1000,7 @@ report_supervisor_state() {
       SUPERVISED=1
       ok "launchd agent loaded ($LAUNCHD_LABEL) — launchd supervises this daemon"
       check_log_path_matches_plist "$OUT" "$LAUNCHD_PLIST"
+      check_jar_path_matches_plist "$JAR" "$LAUNCHD_PLIST"
       ;;
     systemd)
       SUPERVISED=1

scripts/test-config-edit.sh

@@ -629,6 +629,65 @@ test_refusal_shape_from_parse_failure_wording_is_recognised() {
   assert_equals 4 "$RUN_RC" "the parse-failure refusal shape must also exit 4, not be read as silence"
 }
 
+# A verdict line carrying a credentialed URI has its userinfo masked, with a positive control
+# proving the rest of the line still reaches the output unchanged.
+test_verdict_userinfo_is_masked_with_positive_control() {
+  local dir
+  dir="$(new_fixture)"
+
+  start_run "$dir" 5 --set '.profiles.sonnet.weight=4'
+  sleep 1
+  printf 'config reload from %s refused, keeping the running config: refusing to start: malformed pattern — profiles.local.errorPattern ("amqp://user:hunter2@host/vhost"): Unclosed character class near index 8\n' \
+    "$dir/fleetd.yaml" >> "$dir/fleetd.out"
+  collect_run "$dir"
+
+  assert_equals 4 "$RUN_RC" "refusal-with-userinfo exit code"
+  assert_not_contains "user:hunter2" "$RUN_OUTPUT" "the userinfo must never reach the output"
+  assert_contains "amqp://<redacted>@host/vhost" "$RUN_OUTPUT" \
+    "the userinfo must be MASKED, not deleted — the rest of the quoted value must survive"
+  # Positive control: the diagnostic prose on both sides of the userinfo must still reach the
+  # output. Without this, a mutant that drops the whole verdict line would pass identically.
+  assert_contains "malformed pattern" "$RUN_OUTPUT" "prose BEFORE the userinfo must still reach the output"
+  assert_contains "Unclosed character class near index 8" "$RUN_OUTPUT" \
+    "prose AFTER the userinfo must still reach the output"
+}
+
+# An ordinary refusal line quotes the offending pattern, not a credential, and must survive byte
+# for byte: the rewrite is scoped to userinfo only, and the quoted pattern is the detail an
+# operator needs to fix the refusal.
+test_ordinary_refusal_line_passes_through_unchanged() {
+  local dir real_line
+  dir="$(new_fixture)"
+  real_line="config reload from $dir/fleetd.yaml refused, keeping the running config: refusing to start: malformed pattern — profiles.local.errorPattern (\"[unclosed\"): Unclosed character class near index 8"
+
+  start_run "$dir" 5 --set '.profiles.sonnet.weight=4'
+  sleep 1
+  printf '%s\n' "$real_line" >> "$dir/fleetd.out"
+  collect_run "$dir"
+
+  assert_equals 4 "$RUN_RC" "ordinary refusal exit code"
+  assert_contains "$real_line" "$RUN_OUTPUT" \
+    "an ordinary refusal with no userinfo must pass through byte for byte, unchanged"
+}
+
+# A verdict line can hold a URI with NO userinfo and a later, unrelated @ further on in the same
+# line (an email address in diagnostic prose, for example). The rewrite must stop at the end of
+# the URI and must not treat the later @ as a second userinfo delimiter.
+test_uri_without_userinfo_survives_a_later_at_sign() {
+  local dir real_line
+  dir="$(new_fixture)"
+  real_line="config reload from $dir/fleetd.yaml refused, keeping the running config: broker.uri amqp://broker.local/vhost unreachable, contact ops@example.com"
+
+  start_run "$dir" 5 --set '.profiles.sonnet.weight=4'
+  sleep 1
+  printf '%s\n' "$real_line" >> "$dir/fleetd.out"
+  collect_run "$dir"
+
+  assert_equals 4 "$RUN_RC" "no-userinfo-with-later-at-sign exit code"
+  assert_contains "$real_line" "$RUN_OUTPUT" \
+    "a URI with no userinfo plus a later @ in the same line must pass through byte for byte"
+}
+
 # --set runs yq over the whole candidate. It warns when that changes more lines than the requested
 # pairs, but a simple file with only the intended changed line must stay quiet.
 new_fixture_reformat_sensitive() {
@@ -720,6 +779,12 @@ echo "== extra: --check is read-only and always exits 0 =="
 test_check_is_read_only_and_exits_zero
 echo "== extra: the parse-failure refusal shape is also recognised =="
 test_refusal_shape_from_parse_failure_wording_is_recognised
+echo "== verdict-redaction criteria 2+3: verdict userinfo is masked, rest of line survives =="
+test_verdict_userinfo_is_masked_with_positive_control
+echo "== verdict-redaction criterion 4: an ordinary refusal passes through unchanged =="
+test_ordinary_refusal_line_passes_through_unchanged
+echo "== fleetd #638: a URI with no userinfo survives a later @ in the same line =="
+test_uri_without_userinfo_survives_a_later_at_sign
 echo "== acceptance criterion 17: --set warns about yq formatting churn =="
 test_set_warns_when_yq_reformats_extra_lines
 echo "== acceptance criterion 18: --set stays quiet without formatting churn =="

scripts/test-redeploy-fleetd.sh

@@ -492,6 +492,38 @@ test_running_pid_finds_a_real_java_named_second_process() {
     || fail "running_pid() did not find a real second process (pid $standin_pid, comm forced to 'java' via exec -a) whose own argv holds the pattern: before=[$before] after=[$after]"
 }
 
+# PATTERN matches a fleetd jar in either build layout, not only the run/ one: a process whose
+# argv names a jar under target/ must be found too, the same way the run/ case above is.
+test_running_pid_finds_a_real_java_named_process_from_target_dir() {
+  local before after standin_pid
+  before="$(running_pid)"
+  ( exec -a java sh -c 'echo "target/fleetd.jar" >/dev/null; sleep 20' ) &
+  standin_pid=$!
+  sleep 0.3
+  after="$(running_pid)"
+  kill "$standin_pid" 2>/dev/null || true
+  wait "$standin_pid" 2>/dev/null || true
+  printf '%s\n' "$after" | grep -qxF "$standin_pid" \
+    || fail "running_pid() did not find a real second process (pid $standin_pid, comm forced to 'java' via exec -a) naming a jar under target/: before=[$before] after=[$after]"
+}
+
+# Broadening PATTERN to match both build layouts must not also broaden it into matching a
+# non-exec'ing shell that merely holds the target/ text as a literal argument, the same
+# self-matching shape test_running_pid_excludes_self_matching_wrapper_shell above excludes for
+# the run/ text.
+test_running_pid_excludes_self_matching_wrapper_shell_naming_target_dir() {
+  local before after wrapper_pid
+  before="$(running_pid)"
+  sh -c 'echo "target/fleetd.jar" >/dev/null; sleep 20' &
+  wrapper_pid=$!
+  sleep 0.3
+  after="$(running_pid)"
+  kill "$wrapper_pid" 2>/dev/null || true
+  wait "$wrapper_pid" 2>/dev/null || true
+  [ "$after" = "$before" ] \
+    || fail "running_pid() counted a self-matching wrapper shell (pid $wrapper_pid, holding 'target/fleetd.jar' as literal text in its own argv, not the daemon): before=[$before] after=[$after]"
+}
+
 # fleetd #593 CORRECTION 1, hole 2 — the round-1 filter denied known shell names (sh/bash/zsh/
 # dash/ksh) and counted everything else. `ssh`, `perl`, `python3`, `ruby`, `tail` — anything not on
 # that list, carrying the pattern in its own argv — was still counted right alongside the real
@@ -702,6 +734,19 @@ test_report_jar_state_both_absent_is_not_a_mismatch() {
   fi
 }
 
+# Reads JAR and BUILD_JAR exactly as the script sources them, with nothing here assigning
+# either first. JAR must resolve outside $MODULE/target/, and JAR must differ from BUILD_JAR:
+# the daemon's live path and Maven's own build output are never the same file.
+test_jar_and_build_jar_are_sourced_outside_target_and_differ() {
+  source "$ROOT/scripts/redeploy-fleetd.sh"
+  case "$JAR" in
+    "$MODULE"/target/*)
+      fail "\$JAR must not live under \$MODULE/target/ — got $JAR" ;;
+  esac
+  [ "$JAR" != "$BUILD_JAR" ] \
+    || fail "\$JAR and \$BUILD_JAR must not be the same path — got $JAR"
+}
+
 # fleetd #493/#664 — never build into the path a running process holds. swap_staged_jar is
 # exercised directly against real files on disk (not stubs), because the whole point is file
 # behavior (does the content move, does the source disappear, does a failure leave both sides
@@ -1305,12 +1350,71 @@ test_run_drain_gate_declined_reply_refuses() {
   source "$ROOT/scripts/redeploy-fleetd.sh"
 }
 
+# Writes a launchd-plist fixture naming jar_path as the ProgramArguments entry after "-jar", so
+# check_jar_path_matches_plist has something real to read back.
+write_launchd_plist_fixture() {
+  local path="$1" jar_path="$2"
+  cat > "$path" <<PLIST
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
+<plist version="1.0">
+<dict>
+  <key>Label</key>
+  <string>test.fixture</string>
+  <key>ProgramArguments</key>
+  <array>
+    <string>/usr/bin/java</string>
+    <string>-jar</string>
+    <string>$jar_path</string>
+    <string>fleetd.yaml</string>
+  </array>
+</dict>
+</plist>
+PLIST
+}
+
+# Agreeing case: a plist whose ProgramArguments names the same jar, resolved, must proceed and
+# say so, never die.
+test_check_jar_path_matches_plist_agrees_ok() {
+  local dir jar plist output rc=0
+  dir="$TMP/jar-path-agree"; mkdir -p "$dir/run"
+  jar="$dir/run/fleetd.jar"
+  plist="$dir/agree.plist"
+  write_launchd_plist_fixture "$plist" "$jar"
+  output="$(check_jar_path_matches_plist "$jar" "$plist" 2>&1)" || rc=$?
+  [ "$rc" -eq 0 ] \
+    || fail "check_jar_path_matches_plist must succeed when the plist names the same jar: $output"
+  printf '%s' "$output" | grep -qF 'jar path check' \
+    || fail "check_jar_path_matches_plist did not print the agreement line: $output"
+}
+
+# The disagreeing case, and the positive control this check exists for: a plist naming a
+# different jar must die, naming both paths.
+test_check_jar_path_matches_plist_mismatch_dies() {
+  local dir jar other_jar plist output rc=0
+  dir="$TMP/jar-path-mismatch"; mkdir -p "$dir/run" "$dir/target"
+  jar="$dir/run/fleetd.jar"
+  other_jar="$dir/target/fleetd.jar"
+  plist="$dir/mismatch.plist"
+  write_launchd_plist_fixture "$plist" "$other_jar"
+  output="$(check_jar_path_matches_plist "$jar" "$plist" 2>&1)" || rc=$?
+  [ "$rc" -ne 0 ] \
+    || fail "check_jar_path_matches_plist must die when the plist names a different jar"
+  printf '%s' "$output" | grep -qF "$jar" \
+    || fail "die message does not name this script's jar path: $output"
+  printf '%s' "$output" | grep -qF "$other_jar" \
+    || fail "die message does not name the plist's jar path: $output"
+}
+
 # fleetd #555 item 4 — the report-state dispatch on $SUPERVISOR_KIND. Inverting this used to report
 # the wrong supervisor and, for the launchd arm specifically, skip check_log_path_matches_plist.
 CHECK_LOG_PATH_CALLED=0
+CHECK_JAR_PATH_CALLED=0
 stub_check_log_path_recorder() {
   CHECK_LOG_PATH_CALLED=0
+  CHECK_JAR_PATH_CALLED=0
   check_log_path_matches_plist() { CHECK_LOG_PATH_CALLED=1; }
+  check_jar_path_matches_plist() { CHECK_JAR_PATH_CALLED=1; }
 }
 
 test_report_supervisor_state_launchd_sets_supervised_and_checks_log_path() {
@@ -1321,6 +1425,8 @@ test_report_supervisor_state_launchd_sets_supervised_and_checks_log_path() {
   [ "$SUPERVISED" = 1 ] || fail "report_supervisor_state launchd must set SUPERVISED=1"
   [ "$CHECK_LOG_PATH_CALLED" = 1 ] \
     || fail "report_supervisor_state launchd must call check_log_path_matches_plist"
+  [ "$CHECK_JAR_PATH_CALLED" = 1 ] \
+    || fail "report_supervisor_state launchd must call check_jar_path_matches_plist"
   source "$ROOT/scripts/redeploy-fleetd.sh"
 }
 
@@ -1332,6 +1438,8 @@ test_report_supervisor_state_systemd_sets_supervised_without_log_path_check() {
   [ "$SUPERVISED" = 1 ] || fail "report_supervisor_state systemd must set SUPERVISED=1"
   [ "$CHECK_LOG_PATH_CALLED" = 0 ] \
     || fail "report_supervisor_state systemd must NOT call check_log_path_matches_plist"
+  [ "$CHECK_JAR_PATH_CALLED" = 0 ] \
+    || fail "report_supervisor_state systemd must NOT call check_jar_path_matches_plist"
   source "$ROOT/scripts/redeploy-fleetd.sh"
 }
 
@@ -2189,6 +2297,8 @@ test_assert_single_daemon_accepts_one_pid
 test_assert_single_daemon_rejects_two_pids
 test_running_pid_excludes_self_matching_wrapper_shell
 test_running_pid_finds_a_real_java_named_second_process
+test_running_pid_finds_a_real_java_named_process_from_target_dir
+test_running_pid_excludes_self_matching_wrapper_shell_naming_target_dir
 test_running_pid_drops_a_pid_whose_comm_is_not_java
 test_running_pid_drops_a_pid_that_exited_before_the_comm_lookup
 test_running_pid_counts_a_pid_whose_comm_is_java
@@ -2200,6 +2310,7 @@ test_jar_id_reports_unhashable_when_no_hasher_on_path
 test_report_jar_state_agrees_when_hashes_match
 test_report_jar_state_warns_when_hashes_differ
 test_report_jar_state_both_absent_is_not_a_mismatch
+test_jar_and_build_jar_are_sourced_outside_target_and_differ
 test_swap_staged_jar_moves_staged_onto_live
 test_swap_staged_jar_dies_without_staged_file
 test_swap_staged_jar_dies_when_mv_fails
@@ -2241,6 +2352,8 @@ test_drain_confirmed_false_on_anything_else
 test_run_drain_gate_skips_prompt_when_not_required
 test_run_drain_gate_confirmed_reply_does_not_refuse
 test_run_drain_gate_declined_reply_refuses
+test_check_jar_path_matches_plist_agrees_ok
+test_check_jar_path_matches_plist_mismatch_dies
 test_report_supervisor_state_launchd_sets_supervised_and_checks_log_path
 test_report_supervisor_state_systemd_sets_supervised_without_log_path_check
 test_report_supervisor_state_none_leaves_supervised_zero