fleetd #416: fleet_list must enumerate the STARTUP profile set

`profiles` is a DEFERRED key: HerdrPeerLauncher takes Map.copyOf(profiles) once at
construction, so a profile added only to the hot-reloaded map can never be spawned.
CapacitySource was built with `() -> config.get().profiles().keySet()` — the live map —
so fleet_list reported a hot-added profile as free while fleet_spawn on that same
profile failed with "unknown worker profile". fleet_list's contract for `free` says it
runs "the same check the spawn gate itself runs"; it did not.

The set now comes from the startup snapshot, the same shape as the coordinator.peers
wiring three lines below, whose comment already stated the rule. maxLoad stays live on
purpose — ConfigRef documents it as hot, like credentialId and weight — so a maxLoad
edit still takes effect without a restart.

Found by the fleet01 lead, who proved it with a live ghost profile rather than an
argument. Implemented by a sonnet member; its reply was lost to an empty scrape, so the
work was salvaged uncommitted from its worktree and both proof steps were run by the
lead instead:

  full build                          Tests run: 1505, Failures: 0, 0 compile errors
  mutation A: live keySet restored    liveOnlyProfileIsNotListed FAILS (alone)
  mutation B: permanently empty set   startupProfileIsListed FAILS (alone)

Mutation B is the point of the second direction: per #404, a test that only ever checks
the absent case cannot tell a correct lookup from one that returns nothing at all.

CLAUDE.md

@@ -137,7 +137,7 @@ the merge — and merging on a reviewer's word is delegating it by proxy.
 | Answer a member's `fleet_ask` | `fleet_send{turnId, content}` — **not** `sessionId` |
 | Message a **peer lead** on this host | `fleet_send{sessionId: <their terminal>, content}` — `fleet_list` → `leads` reports it. Coordination only, **never** a task |
 | Message a **peer lead** on another daemon or host | `fleet_send{coordId: <their coord-id>, content}` — needs a `coordinator:` block; your own coord-id is in `fleet_list`. Coordination only, **never** a task |
-| Answer a peer lead that messaged you | `fleet_reply{content}` — the one case a lead replies |
+| Answer a peer lead that messaged you | `fleet_send{coordId}` — or `{sessionId}` if they are on this host. **Not** `fleet_reply`: it has no peer route and the publish is refused |
 | Collect a held reply | `fleet_poll{target}` · then `fleet_ack{target, msgId}` |
 | Tear down a member | `fleet_stop{paneId}` |
 
@@ -163,15 +163,21 @@ The traffic between leads is coordination and nothing else:
 3. **Verify a peer exactly as you verify yourself.** Peer status buys nothing: check the claim
    against the code, and re-run the build. A peer's correction gets the same treatment — right or
    wrong on the evidence, not on who said it. Neither of you merges the other's work unreviewed.
+   **N observations are N data points only if they differ in the axis you are trusting.** This cuts
+   both ways. N *failures* blamed on one cause are one data point when the cases share what you are
+   not varying. N *agreeing measurements* are also one data point when they share an instrument —
+   two hosts, two operators and the same formula is one formula, not two confirmations.
 4. **Ask a peer to read your project addendum.** Your addendum is instruction surface: every future
    session on your host obeys it, and a wrong one is obeyed just as faithfully as a right one. The
    author is the worst reader of their own qualifier placement — measured here, one addendum carried
    two defects and a non-author found both. If you have no peer, at least re-read it asking "which
    sentence goes false first, and would a reader reach the caveat before acting?"
 
-Being messaged by a peer does not make you its worker: answer with `fleet_reply`, and push back on
-the substance if it is wrong. A peer that simply complies has thrown away the reason there are two of
-you.
+Being messaged by a peer does not make you its worker: answer the way you would open —
+`fleet_send{coordId}` for another daemon, `fleet_send{sessionId}` on this host — and push back on
+the substance if it is wrong. `fleet_reply` resolves a member's blocked `fleet_send`; a peer's
+coord-id message is durable and non-blocking, so there is nothing for it to resolve. A peer that
+simply complies has thrown away the reason there are two of you.
 
 ### Member (worker or architect) — the turn contract
 

fleetd/fleetd.example.yaml

@@ -877,3 +877,32 @@ guard:
 #   terminal: term_65619bd6174568
 #   pushReminders: 5
 #   pushBackoffMs: 15000
+
+# Central allow-list of models any profiles: entry may name. Nothing checked a profile's model:
+# value before this block existed — it was a free-form string handed straight to the backend
+# adapter, and a withdrawn or misspelled name failed silently instead of at config load (opencode
+# falls back to a default model rather than erroring on an unknown -m).
+#
+# Absent, or present with an empty allow:, is OFF: no profile's model: is checked, exactly like
+# before this block existed. fleetd.yaml is gitignored on every host, so an upgrade must not force
+# every operator to enumerate their models before the daemon will start.
+#
+# The list is the authority; profiles: is checked against it, never the reverse — adding or
+# editing a profiles: entry cannot, by itself, widen what is permitted here.
+#
+# Enforcement is at CONFIG LOAD only (a bad model: fails the daemon at startup, naming both the
+# model and the profile). There is no spawn-time enforcement, no runtime on/off switch, and no
+# interaction with BackendQuarantine — those are separate, later units.
+#
+#   allow → the permitted models. Each entry is its own block (not a bare string) so a later unit
+#           can add an on/off state or a load limit per model without changing this shape.
+#     model → the model id exactly as a profiles: entry's model: field would write it. One flat,
+#             opaque-string namespace: a bare Claude id (claude-sonnet-5) and an opencode
+#             provider-prefixed id (openai/gpt-5.6-terra) both fit here unchanged — the check is a
+#             plain string match, never a parse of the provider prefix or a branch on kind:.
+# models:
+#   allow:
+#     - model: claude-sonnet-5
+#     - model: claude-opus-5
+#     - model: openai/gpt-5.6-terra
+#     - model: amazon.nova-pro-v1:0

fleetd/src/main/java/dev/ltms/fleet/Fleetd.java

@@ -134,6 +134,10 @@ public final class Fleetd {
         // secret is reported above, so upgrading past this commit never silently drops CB-592's
         // protection.
         reportMemberCredentialsGap(cfg);
+        // fleetd #395: an unset exhaustedPattern is a silent opt-out of usage-limit detection for
+        // that profile — say so loudly, the same way the two reports above do, rather than let an
+        // operator discover it only when a limit goes undetected.
+        reportExhaustedPatternGap(cfg);
         // CB-559: `cfg` stays the startup snapshot — every validation and every piece of one-time
         // wiring below reads it, and must, because those decisions cannot be unmade. `config` is the
         // live reference the hot paths read per use. Which keys can actually move is ConfigRef's
@@ -144,19 +148,16 @@ public final class Fleetd {
         SubscriptionGuard guard = new SubscriptionGuard(cfg.guard().hostSet());
         guard.assertPrimaryClean(System.getenv());
 
-        // CB-501: refuse to start if the bind is wider than the auth mode can defend. Under
-        // loopback-trust, "not a known worker" means "the primary" — sound only because the OS
-        // refuses remote connections to a loopback socket. This throws rather than warns so the
-        // dangerous configuration cannot be reached by ignoring a log line.
-        cfg.validateAuthExposure();
-        cfg.validateLeadTabPrefixes();
-        // CB-542: a subscription:true profile whose env: reseats ANTHROPIC_BASE_URL/AUTH_TOKEN would
-        // reach an unguarded endpoint (the launcher skips SubscriptionGuard for it). Refuse at load.
-        cfg.validateSubscriptionProfiles();
-        cfg.validateCharters();
-        // CB-548: every architect slot must name a configured workers: profile — the strong-model
-        // backend the future spawn lifecycle would read. A stale reference dies here, not later.
-        cfg.validateMembers();
+        // Every FleetConfig.validateXxx() the operator's config can fail — CB-501's auth-exposure
+        // check, CB-531's lead-tab-prefix check, CB-542's subscription-profile check, the charter
+        // and member-slot checks, and the "central allow-list of usable models" check — must run
+        // here, at load, before anything below opens a socket or spawns a member. fleetd ticket
+        // "central allow-list of usable models" follow-up: mutation testing found six individual
+        // calls here with nothing proving any of them still ran (deleting one left the full suite
+        // green). validateAll() replaces them with the one call that FleetConfigValidateAllTest
+        // and the Fleetd-startup tests actually pin — see FleetConfig#validateAll's javadoc for
+        // why a name-by-name list here would have the same defect it replaces.
+        cfg.validateAll();
 
         Path socket = cfg.herdrSocket() != null && !cfg.herdrSocket().isBlank()
                 ? Path.of(cfg.herdrSocket())
@@ -661,21 +662,16 @@ public final class Fleetd {
         // built a second time — two independently-constructed sources reading the SAME BackendQuarantine
         // / BackendOutagePolicy would still be able to drift (e.g. a future edit to the credentialIdFor
         // closure in only one of the two places), exactly the shape #284 was.
-        FleetMcp.QuarantineSource quarantineSource = new FleetMcp.QuarantineSource(profile -> {
-            var configured = config.get().profiles().get(profile);
-            return configured == null ? null : configured.effectiveCredentialId();
-        }, quarantine);
+        FleetMcp.QuarantineSource quarantineSource = quarantineSource(config, quarantine,
+                exhaustedPatternsByProfile);
         FleetMcp.OutageSource outageSource = new FleetMcp.OutageSource(profile -> {
             var configured = config.get().profiles().get(profile);
             return configured == null ? null : configured.effectiveCredentialId();
         }, outagePolicy);
 
         FleetMcp mcp = new FleetMcp(messages, workers, sessions, identity, presence,
-                primaryRegistry, callers, metrics, new FleetMcp.CapacitySource(profile -> liveCountRef.get().apply(profile),
-                profile -> {
-                    var configured = config.get().profiles().get(profile);
-                    return configured == null ? null : configured.maxLoad();
-                }, () -> config.get().profiles().keySet(), System::nanoTime),
+                primaryRegistry, callers, metrics,
+                capacitySource(config, cfg, profile -> liveCountRef.get().apply(profile)),
                 new FleetMcp.HealthCoverageSource(() -> {
                     var health = config.get().health();
                     return FleetHealthMonitor.coverage(health != null && health.isEnabled(),
@@ -798,6 +794,46 @@ public final class Fleetd {
         return target -> presence.isPresent(target) || leads.get().containsKey(target);
     }
 
+    /**
+     * fleetd #404: production source for quarantine reporting. Credential IDs are hot, but
+     * exhausted patterns are compiled once at startup for {@link CompletionResolver}, so the armed
+     * field must use that same compiled map until restart.
+     */
+    static FleetMcp.QuarantineSource quarantineSource(ConfigRef config, BackendQuarantine quarantine,
+            Map<String, Pattern> startupExhaustedPatterns) {
+        return new FleetMcp.QuarantineSource(profile -> {
+            var configured = config.get().profiles().get(profile);
+            return configured == null ? null : configured.effectiveCredentialId();
+        }, quarantine, profile -> startupExhaustedPatterns.containsKey(profile));
+    }
+
+    /**
+     * fleetd #416: production source for {@code fleet_list}'s per-profile capacity facts.
+     *
+     * <p>The profile <em>set</em> ({@code configuredProfiles}) must come from {@code cfg} — the
+     * startup snapshot — not the live {@code config.get()}. {@code profiles} as a whole is a
+     * {@code DEFERRED} key ({@link ConfigRef#DEFERRED_KEYS}): {@code HerdrPeerLauncher} takes
+     * {@code Map.copyOf(profiles)} once at construction and a profile only added to the
+     * hot-reloaded map can never actually be spawned, so enumerating it live made {@code fleet_list}
+     * report a profile as available when {@code fleet_spawn} on that same profile fails with
+     * {@code unknown worker profile}. {@code fleet_list}'s own contract for {@code free} is "the
+     * same check the spawn gate itself runs" — the set the spawn gate can see is the startup one,
+     * so this must enumerate that one too, the same shape as {@code coordinator.peers} above.
+     *
+     * <p>{@code maxLoad} stays live on purpose: it is read off {@code config.get()} exactly like
+     * {@code credentialId} ({@link ConfigRef} documents both as hot), so an existing profile's
+     * {@code maxLoad} edit must still change what {@code fleet_list} reports without a restart.
+     */
+    static FleetMcp.CapacitySource capacitySource(ConfigRef config, FleetConfig cfg,
+            Function<String, Integer> liveCount) {
+        return new FleetMcp.CapacitySource(liveCount,
+                profile -> {
+                    var configured = config.get().profiles().get(profile);
+                    return configured == null ? null : configured.maxLoad();
+                },
+                cfg.profiles()::keySet, System::nanoTime);
+    }
+
     /**
      * fleetd #248: package-private factory for the member worktree/branch lookup {@link
      * CompletionResolver} uses to name a fallback report's worktree and branch (fleetd#241).
@@ -1323,6 +1359,52 @@ public final class Fleetd {
                 + "fleetd.yaml — see fleetd.example.yaml — and restart.");
     }
 
+    /**
+     * fleetd #395: {@code exhaustedPattern} (see {@link FleetConfig.Profile#exhaustedPattern}) is
+     * deliberately opt-in — {@code null}/blank means a backend refusal on that profile is never
+     * classified as {@code BACKEND_EXHAUSTED}, so its credential is never quarantined. That is a
+     * legitimate choice (guessing the vendor's wording would be worse), but an operator who never
+     * opted a profile in should not discover the gap only when a usage limit silently goes
+     * undetected. Warn once at startup, naming every unarmed profile, exactly like {@link
+     * #reportMemberCredentialsGap} — never refuse to start over it.
+     *
+     * <p>A {@code subscription: true} profile that is unarmed gets a SECOND, louder WARN of its
+     * own: it bills the operator's metered Claude plan, the case where an undetected usage limit
+     * costs the most.
+     *
+     * <p>Package-private so a test can capture the real log via a {@link
+     * ch.qos.logback.core.read.ListAppender}, the same pattern {@link
+     * #reportMemberCredentialsGap}'s own test uses.
+     */
+    static void reportExhaustedPatternGap(FleetConfig cfg) {
+        List<String> unarmedSubscription = new ArrayList<>();
+        List<String> unarmedOther = new ArrayList<>();
+        cfg.profiles().forEach((name, profile) -> {
+            if (!profile.hasExhaustedPattern()) {
+                (profile.isSubscription() ? unarmedSubscription : unarmedOther).add(name);
+            }
+        });
+        if (unarmedSubscription.isEmpty() && unarmedOther.isEmpty()) {
+            log.info("exhaustedPattern: every configured profile has usage-limit detection armed");
+            return;
+        }
+        List<String> allUnarmed = new ArrayList<>(unarmedSubscription);
+        allUnarmed.addAll(unarmedOther);
+        allUnarmed = allUnarmed.stream().sorted().toList();
+        log.warn("exhaustedPattern: profile(s) {} have no exhaustedPattern configured — a "
+                        + "usage-limit refusal on any of them is never detected and never "
+                        + "quarantines its credential. Set exhaustedPattern (see "
+                        + "fleetd.example.yaml) to arm detection for a profile.",
+                allUnarmed);
+        if (!unarmedSubscription.isEmpty()) {
+            List<String> sortedSubscription = unarmedSubscription.stream().sorted().toList();
+            log.warn("exhaustedPattern: subscription profile(s) {} run on the operator's metered "
+                            + "Claude plan and have NO usage-limit detection armed — this is the "
+                            + "case where a missed usage limit costs the most.",
+                    sortedSubscription);
+        }
+    }
+
     /**
      * Poll herdr's {@code ping} until it answers or {@link #HERDR_WAIT_SECONDS} elapses (CB-504).
      *

fleetd/src/main/java/dev/ltms/fleet/config/ConfigRef.java

@@ -43,6 +43,12 @@ import java.util.function.Supplier;
  *       running daemon keeps whatever this was at startup regardless of a later edit),
  *       {@code spawnReadyTimeoutMs} / {@code spawnReadyPollMs}, {@code quarantineCooldownSeconds}
  *       (CB-578 stage B — baked once into the {@code BackendQuarantine} built at startup),
+ *       {@code models:} (fleetd ticket "central allow-list of usable models" — {@link
+ *       FleetConfig#validateModels()} re-runs against the fresh config in {@link #reload()}
+ *       (via {@link FleetConfig#validateAll()}), so a
+ *       models.allow: edit that would refuse to boot still refuses the reload; a change that
+ *       passes has nothing built at startup to rebuild, so it is reported deferred rather than
+ *       silently accepted with no report at all),
  *       {@code guard:}, {@code worktreeRoot:}, {@code worktreeGroup:} and {@code memberSkills:}
  *       (all three of the latter baked once into the {@code GitWorktrees} built at
  *       {@code Fleetd.java:251} and never rebuilt — fleetd #323 instance 2 found
@@ -135,8 +141,9 @@ import java.util.function.Supplier;
  * </ul>
  *
  * <p><strong>The denominator, measured on 2026-09-04 (fleetd #330; recounted for fleetd #333);
- * recounted again for fleetd #362, and again after {@code idleSleepGuard:} was added.</strong>
- * {@code FleetConfig} has 24 top-level record components: 5 cold, 13 deferred, 3 split, 3
+ * recounted again for fleetd #362, again after {@code idleSleepGuard:} was added, and again after
+ * {@code models:} was added.</strong>
+ * {@code FleetConfig} has 25 top-level record components: 5 cold, 14 deferred, 3 split, 3
  * hot-excluded. Three of them are named nowhere in this file, and the reason is the same for all
  * three: {@code placement}, {@code memberCredentials} and {@code memberLoginShell} are
  * <strong>hot</strong> and correctly absent — all three are read live off {@code config.get()}
@@ -219,7 +226,7 @@ public final class ConfigRef implements Supplier<FleetConfig> {
     static final Set<String> DEFERRED_KEYS = Set.of(
             "guard", "worktreeRoot", "worktreeGroup", "memberSkills", "primary", "configReload",
             "leadHeartbeat", "lifecycle", "spawnReadyTimeoutMs", "spawnReadyPollMs",
-            "quarantineCooldownSeconds", "profiles", "idleSleepGuard");
+            "quarantineCooldownSeconds", "profiles", "idleSleepGuard", "models");
 
     private final Path path;
     private final AtomicReference<FleetConfig> current;
@@ -322,12 +329,12 @@ public final class ConfigRef implements Supplier<FleetConfig> {
             fresh = FleetConfig.load(path);
             // The same gate startup runs. A config that would have refused to boot must not be able
             // to slip in through a reload — that is how a daemon ends up in a state it could never
-            // have started in, which is the hardest kind to debug.
-            fresh.validateAuthExposure();
-            fresh.validateLeadTabPrefixes();
-            fresh.validateSubscriptionProfiles();
-            fresh.validateCharters();
-            fresh.validateMembers();
+            // have started in, which is the hardest kind to debug. fleetd ticket "central allow-list
+            // of usable models" follow-up: this used to be six individual validateXxx() calls, and
+            // mutation testing found two of the six unpinned here even though startup pinned nothing
+            // at all — see FleetConfig#validateAll's javadoc for why the fix is one reflective call,
+            // not a longer hand-maintained list.
+            fresh.validateAll();
         } catch (RuntimeException e) {
             String msg = e.getMessage() == null ? e.toString() : e.getMessage();
             log.warn("config reload from {} refused, keeping the running config: {}", path, msg);
@@ -439,6 +446,15 @@ public final class ConfigRef implements Supplier<FleetConfig> {
         if (!Objects.equals(old.idleSleepGuard(), fresh.idleSleepGuard())) {
             changed.add("idleSleepGuard");
         }
+        // fleetd ticket "central allow-list of usable models": validateModels() runs again in
+        // reload() above (via validateAll()), so a bad edit is already refused as cold-adjacent
+        // (the whole reload is refused via the catch block, never partially applied). A GOOD edit
+        // to the allow-list
+        // itself has nothing built at startup to rebuild — it only ever mattered to the validation
+        // call that already ran — so report it deferred rather than silently swallowing the change.
+        if (!Objects.equals(old.models(), fresh.models())) {
+            changed.add("models");
+        }
         if (!Objects.equals(old.spawnReadyTimeoutMs(), fresh.spawnReadyTimeoutMs())
                 || !Objects.equals(old.spawnReadyPollMs(), fresh.spawnReadyPollMs())) {
             changed.add("spawnReady*");

fleetd/src/main/java/dev/ltms/fleet/config/FleetConfig.java

@@ -16,11 +16,15 @@ import org.slf4j.LoggerFactory;
 
 import java.io.IOException;
 import java.io.UncheckedIOException;
+import java.lang.reflect.InvocationTargetException;
+import java.lang.reflect.Method;
+import java.lang.reflect.Modifier;
 import java.nio.file.Files;
 import java.nio.file.Path;
 import java.util.ArrayList;
 import java.util.Arrays;
 import java.util.Collections;
+import java.util.Comparator;
 import java.util.HashSet;
 import java.util.LinkedHashMap;
 import java.util.List;
@@ -124,6 +128,13 @@ import java.util.regex.PatternSyntaxException;
  *                      under a member's long turn. {@code null} (the block omitted) behaves the
  *                      same as an explicit {@code enabled: true}; set {@code enabled: false} to
  *                      turn it off. See {@link dev.ltms.fleet.power.IdleSleepGuard}.
+ * @param models        central allow-list of models any {@code profiles:} entry may name. {@code
+ *                      null} or an empty {@code allow:} ⇒ off: {@link #validateModels()} checks
+ *                      nothing and every existing config keeps working exactly as it does today.
+ *                      When non-empty, a profile whose {@code model:} is not one of {@link
+ *                      Models#ids()} fails config load, naming both the model and the profile —
+ *                      see {@link #validateModels()}. This block only decides what may be
+ *                      CONFIGURED; nothing here enforces it at spawn time. See {@link Models}.
  */
 @JsonIgnoreProperties(ignoreUnknown = true)
 public record FleetConfig(
@@ -150,7 +161,22 @@ public record FleetConfig(
         String worktreeGroup,
         String memberLoginShell,
         String memberSkills,
-        IdleSleepGuard idleSleepGuard) {
+        IdleSleepGuard idleSleepGuard,
+        Models models) {
+
+    /** Back-compat form before the {@code models:} block was added. */
+    public FleetConfig(Bind bind, String herdrSocket, String memberHerdrSocket, Map<String, Profile> profiles,
+                         Guard guard, String worktreeRoot, Lifecycle lifecycle, Integer spawnReadyTimeoutMs,
+                         Integer spawnReadyPollMs, Broker broker, Primary primary, Fleet fleet,
+                         LeadHeartbeat leadHeartbeat, Health health, String placement, Auth auth,
+                         ConfigReload configReload, Integer quarantineCooldownSeconds,
+                         MemberCredentials memberCredentials, Coordinator coordinator, String worktreeGroup,
+                         String memberLoginShell, String memberSkills, IdleSleepGuard idleSleepGuard) {
+        this(bind, herdrSocket, memberHerdrSocket, profiles, guard, worktreeRoot, lifecycle, spawnReadyTimeoutMs,
+                spawnReadyPollMs, broker, primary, fleet, leadHeartbeat, health, placement, auth,
+                configReload, quarantineCooldownSeconds, memberCredentials, coordinator, worktreeGroup,
+                memberLoginShell, memberSkills, idleSleepGuard, null);
+    }
 
     /** Back-compat form before the {@code idleSleepGuard:} block was added. */
     public FleetConfig(Bind bind, String herdrSocket, String memberHerdrSocket, Map<String, Profile> profiles,
@@ -1318,6 +1344,72 @@ public record FleetConfig(
         }
     }
 
+    /**
+     * Central allow-list of models any {@code profiles:} entry may name (fleetd ticket: "a central
+     * allow-list of usable models"). Nothing before this block checked a profile's {@code model:}
+     * against anything — it was a free-form string handed straight to the backend adapter, and a
+     * withdrawn or misspelled name failed silently (opencode falls back to a default model rather
+     * than erroring on an unknown {@code -m}) rather than at config load, where a mistake is cheap.
+     *
+     * <p><b>Absent or empty {@code allow:} is "off"</b>, on purpose: this is a large deployment
+     * with gitignored {@code fleetd.yaml} on more than one host, and a change that forced every
+     * operator to enumerate their models before the daemon would start would break every one of
+     * them on upgrade. See {@link FleetConfig#validateModels()}, which is where the allow-list is
+     * actually enforced, at config load.
+     *
+     * <p><b>The list is the authority; a {@code profiles:} entry is checked against it, never the
+     * other way around.</b> Adding or editing a {@code profiles:} entry cannot, by itself, widen
+     * the set of permitted models — only editing {@code models.allow:} itself can. This is the
+     * invariant the ticket asked for: the two blocks are validated in one direction only.
+     *
+     * <p><b>Out of scope here, deliberately:</b> nothing in this block is read at spawn time —
+     * enforcing it against a live spawn, an on/off runtime switch, and any interaction with {@code
+     * BackendQuarantine} are separate units. This block is config-load validation only.
+     *
+     * @param allow the permitted models, each its own {@link ModelEntry} rather than a bare
+     *              string — see that record's javadoc for why. {@code null}/empty ⇒ the block is
+     *              treated as absent: {@link FleetConfig#validateModels()} checks nothing.
+     */
+    @JsonIgnoreProperties(ignoreUnknown = true)
+    public record Models(List<ModelEntry> allow) {
+
+        public Models {
+            allow = (allow == null) ? List.of() : List.copyOf(allow);
+        }
+
+        /**
+         * One permitted model, named as a record rather than a bare string on purpose: a later unit
+         * needs to hang an on/off state and a load-limit state off each entry, and a bare {@code
+         * List<String>} cannot grow those fields without changing the YAML shape underneath every
+         * operator who already wrote one. {@link #model()} is intentionally a single flat,
+         * opaque-string namespace — a bare Claude id ({@code claude-sonnet-5}) and an opencode
+         * provider-prefixed id ({@code openai/gpt-5.6-terra}) both fit it unchanged, because
+         * {@link FleetConfig#validateModels()} only ever compares a profile's {@code model:} value
+         * against this string for exact equality; it never parses a provider prefix or branches on
+         * a profile's {@code kind:}.
+         *
+         * @param model the model id exactly as a {@code profiles:} entry's {@code model:} field
+         *              would name it
+         */
+        @JsonIgnoreProperties(ignoreUnknown = true)
+        public record ModelEntry(String model) {
+            public ModelEntry {
+                model = (model == null || model.isBlank()) ? null : model.trim();
+            }
+        }
+
+        /** {@link #allow}'s model ids, as a set for membership checks. Blank/null entries are dropped. */
+        public Set<String> ids() {
+            Set<String> ids = new java.util.LinkedHashSet<>();
+            for (ModelEntry e : allow) {
+                if (e != null && e.model() != null) {
+                    ids.add(e.model());
+                }
+            }
+            return Collections.unmodifiableSet(ids);
+        }
+    }
+
     /**
      * The terminal → lead-name map seeded from the legacy singular {@code primary:} pin (CB-530).
      *
@@ -1569,7 +1661,7 @@ public record FleetConfig(
             "lifecycle", "spawnReadyTimeoutMs", "spawnReadyPollMs", "broker", "primary", "fleet",
             "leadHeartbeat", "health", "placement", "auth", "configReload", "quarantineCooldownSeconds",
             "memberCredentials", "coordinator", "worktreeGroup", "memberLoginShell", "memberSkills",
-            "idleSleepGuard");
+            "idleSleepGuard", "models");
 
     /** Load and validate config from {@code path}. */
     public static FleetConfig load(Path path) {
@@ -2254,10 +2346,15 @@ public record FleetConfig(
         // enabled: true — see its javadoc), so defaulting the block here would change nothing a
         // reader observes and would only obscure that "block omitted" and "block present and
         // enabled" are deliberately the same outcome.
+        // models is left as-is, like broker/primary/coordinator above: null/empty is "off", and an
+        // absent block must validate nothing (see Models's javadoc) — defaulting it here to an
+        // empty Models would be a no-op for validateModels() either way, since an empty allow-list
+        // already means "check nothing", so there is nothing to gain and one more null check to
+        // avoid by leaving it exactly as configured.
         return new FleetConfig(b, herdrSocket, memberHerdrSocket, profiles, g, worktreeRoot, l, timeout, pollMs,
                 broker, primary, f, leadHeartbeat, health, placementOrDefault, a, configReload,
                 quarantineCooldown, mc, coordinator, worktreeGroup, memberLoginShell, memberSkills,
-                idleSleepGuard);
+                idleSleepGuard, models);
     }
 
     /**
@@ -2477,6 +2574,118 @@ public record FleetConfig(
         }
     }
 
+    /**
+     * Reject a {@code profiles:} entry whose {@code model:} is not on the configured {@link
+     * #models} allow-list.
+     *
+     * <p>Absent or empty {@code models.allow:} validates nothing — see {@link Models}'s javadoc:
+     * an existing config with no such block must keep working exactly as it does today. Once the
+     * operator declares at least one entry, every profile's {@code model:} (when set — a profile
+     * may legitimately leave it {@code null}, e.g. a {@code subscription: true} profile relying on
+     * the account's own default) must equal one of {@link Models#ids()} exactly. The comparison is
+     * a flat string match: a bare Claude id and an opencode {@code provider/model} id are both
+     * just opaque strings here, so nothing here needs to know which {@code kind:} a profile runs.
+     *
+     * <p>The check runs one direction only, by construction: it reads {@link #profiles} and
+     * {@link #models}, and only ever adds to {@code bad} when a profile's model is missing from
+     * the allow-list. Nothing here can be satisfied by widening a {@code profiles:} entry — only
+     * editing {@code models.allow:} itself changes what passes. That is the invariant the ticket
+     * asked for: the list is the authority, profiles are checked against it.
+     *
+     * @throws IllegalStateException when any profile names a model outside the configured
+     *                               allow-list, naming both the model and the profile that wanted it
+     */
+    public void validateModels() {
+        if (models == null || models.allow().isEmpty()) {
+            return;
+        }
+        Set<String> allowed = models.ids();
+        List<String> bad = new ArrayList<>();
+        profiles.forEach((name, p) -> {
+            String model = p.model();
+            if (model != null && !model.isBlank() && !allowed.contains(model)) {
+                bad.add("profile '" + name + "' names model '" + model + "', which is not in "
+                        + "models.allow: (have: " + allowed + ").");
+            }
+        });
+        if (!bad.isEmpty()) {
+            throw new IllegalStateException("refusing to start: " + String.join(" ", bad));
+        }
+    }
+
+    /**
+     * Runs every validator this class declares — found by reflection, not by name.
+     *
+     * <p>fleetd ticket "central allow-list of usable models", follow-up: mutation testing found
+     * that although each of the six validators above was well pinned on its own, nothing proved
+     * either real caller ({@code Fleetd.main} and {@link ConfigRef#reload()}) still
+     * invoked it — deleting a call site left the full suite green. The fix is not a seventh test
+     * per caller; a hand-maintained list of six names here would have the exact same defect its
+     * own javadoc would warn against: the seventh validator someone adds next month has no reason
+     * to be added to it. So this method does not name any validator. It sweeps {@link
+     * #getClass()}'s own public, no-argument, {@code void} methods whose name starts with {@code
+     * "validate"} (excluding itself) and invokes every one it finds, via {@link
+     * #invokeAllValidators}. A new {@code validateXxx()} method is therefore wired into both
+     * callers the moment it is written — there is no second step to forget, and so no state in
+     * which it silently never runs.
+     *
+     * <p>{@code Fleetd.main} and {@link ConfigRef#reload()} each call this one method instead of
+     * the six individually — see the comments at those two call sites for why
+     * each must run it.
+     *
+     * <p>Methods run in a fixed (alphabetical) order, so a config with more than one violation
+     * always names the same one first, on every run.
+     *
+     * @throws IllegalStateException (or whatever unchecked exception a validator itself throws),
+     *                                propagated unchanged from the first validator, in that order,
+     *                                that finds a problem
+     */
+    public void validateAll() {
+        invokeAllValidators(this);
+    }
+
+    /**
+     * The reflective sweep behind {@link #validateAll()}, kept as its own method — taking any
+     * {@code target}, not just {@code this} — so a test can prove the MECHANISM is generic (it
+     * would sweep a seventh {@code validateXxx()} method added to any class, not just something
+     * special-cased to today's six on {@link FleetConfig}) without needing to add a real, unwanted
+     * seventh validator to this class just to exercise that claim. See {@code
+     * FleetConfigValidateAllTest} for that proof.
+     *
+     * @param target an object whose public, no-argument, {@code void} methods named {@code
+     *               validateXxx} (any name starting with {@code "validate"}, excluding {@code
+     *               validateAll} itself) should all run, in alphabetical-by-name order
+     */
+    static void invokeAllValidators(Object target) {
+        List<Method> methods = new ArrayList<>();
+        for (Method m : target.getClass().getMethods()) {
+            if (Modifier.isPublic(m.getModifiers())
+                    && m.getParameterCount() == 0
+                    && m.getReturnType() == void.class
+                    && m.getName().startsWith("validate")
+                    && !m.getName().equals("validateAll")) {
+                methods.add(m);
+            }
+        }
+        methods.sort(Comparator.comparing(Method::getName));
+        for (Method m : methods) {
+            try {
+                m.invoke(target);
+            } catch (InvocationTargetException e) {
+                Throwable cause = e.getCause();
+                if (cause instanceof RuntimeException re) {
+                    throw re;
+                }
+                if (cause instanceof Error err) {
+                    throw err;
+                }
+                throw new IllegalStateException("validator " + m.getName() + " failed", cause);
+            } catch (IllegalAccessException e) {
+                throw new IllegalStateException("cannot invoke validator " + m.getName(), e);
+            }
+        }
+    }
+
     /** True for the loopback addresses and the unspecified-but-local forms we treat as same-host. */
     private static boolean isLoopbackBind(String host) {
         if (host == null || host.isBlank()) {

fleetd/src/main/java/dev/ltms/fleet/mcp/FleetMcp.java

@@ -119,9 +119,28 @@ public final class FleetMcp {
     /**
      * CB-578 stage B quarantine facts used by {@code fleet_profiles}: a profile → credential id
      * lookup, plus the shared {@link BackendQuarantine} to read remaining cooldowns off.
+     *
+     * @param exhaustedPatternArmed fleetd #395: profile → whether that profile's {@code
+     *                      exhaustedPattern} is configured (see {@code
+     *                      FleetConfig.Profile#hasExhaustedPattern}), i.e. whether a backend refusal
+     *                      on it can EVER be classified {@code BACKEND_EXHAUSTED} and quarantine its
+     *                      credential. Bundled here, not a separate Source, because it answers the
+     *                      exact question {@code fleet_profiles}'s quarantine facts already answer
+     *                      for a QUARANTINED profile — "can this profile's usage limit ever be
+     *                      caught?" — just for every profile, not only one currently caught.
      */
-    public record QuarantineSource(Function<String, String> credentialIdFor, BackendQuarantine quarantine) {
-        /** Inert source — no profile is ever reported quarantined. Explicit stand-in, not a default. */
+    public record QuarantineSource(Function<String, String> credentialIdFor, BackendQuarantine quarantine,
+                                    Function<String, Boolean> exhaustedPatternArmed) {
+        /**
+         * Backward-compatible 2-arg form, before fleetd #395 added {@code exhaustedPatternArmed} —
+         * reports every profile unarmed. Keeps every pre-existing call site (production and test)
+         * compiling and behaving identically for the quarantine facts they actually asked for.
+         */
+        public QuarantineSource(Function<String, String> credentialIdFor, BackendQuarantine quarantine) {
+            this(credentialIdFor, quarantine, _ -> false);
+        }
+
+        /** Inert source — no profile is ever reported quarantined or armed. Explicit stand-in, not a default. */
         public static QuarantineSource none() { return new QuarantineSource(_ -> null, BackendQuarantine.none()); }
     }
 
@@ -346,7 +365,7 @@ public final class FleetMcp {
                     String self = callerTerminal(exchange);
                     McpSchema.CallToolResult denied = deny(exchange, toolAction("fleet_reply", req.arguments()), self);
                     if (denied != null) return denied;
-                    return reply(messages, self, str(req.arguments(), "content"));
+                    return reply(messages, self, principal(exchange).role(), str(req.arguments(), "content"));
                 };
         // fleet_ask (CB-205): a worker's mid-turn question — identity from the CONNECTION.
         BiFunction<McpSyncServerExchange, McpSchema.CallToolRequest, McpSchema.CallToolResult> askHandler =
@@ -868,19 +887,26 @@ public final class FleetMcp {
     /**
      * {@code fleet_reply}: the worker returns its structured answer, resolving the awaiting send
      * or — when no send is open — queueing the reply in the inbox for later drain (CB-307).
-     * {@code callerTerminal} is resolved from the connection (never an argument); a {@code null}
-     * means the caller is not a known worker (e.g. the primary called it by mistake).
+     * {@code callerTerminal} and {@code callerRole} are resolved from the connection (never an
+     * argument). A {@code null} terminal means the caller is not a known worker. A PRIMARY with a
+     * terminal is a lead and must use {@code fleet_send}, because reply has no peer-lead route.
      *
      * <p>fleetd #365: the result text names which of those actually happened
      * ({@link MessageService.ReplyOutcome#description()}) instead of the single word "delivered"
      * for both — a queued reply is a real success, but it is not the same fact as one that resolved
      * a live waiter, and the caller could not previously tell them apart.
      */
-    static McpSchema.CallToolResult reply(MessageService messages, String callerTerminal, String content) {
+    static McpSchema.CallToolResult reply(MessageService messages, String callerTerminal, Role callerRole, String content) {
         if (callerTerminal == null) {
             return error("fleet_reply is for workers only — could not identify the calling worker "
                     + "from the connection");
         }
+        if (callerRole == Role.PRIMARY) {
+            return error("fleet_reply has no route to a peer lead. Use fleet_send{coordId: ...} for a peer on another "
+                    + "daemon or fleet_send{sessionId: ...} for a peer on this host. fleet_reply resolves a member's "
+                    + "blocked fleet_send, and a peer's coord-id message is durable and non-blocking, so there is "
+                    + "nothing for it to resolve.");
+        }
         // fleetd #302: isBlank, not == null, to match fleet_send's own guard above. MessageService
         // .reply now REJECTS blank content, and this handler is a bare BiFunction with no try/catch
         // around it — so a whitespace-only fleet_reply would leave here as an uncaught
@@ -1109,6 +1135,14 @@ public final class FleetMcp {
      * not the other, and the two then disagree about a live outage. That is exactly what fleetd
      * #284 was, where one rule computed in two places was widened in only one and a single response
      * contradicted itself. Shared inputs do not make duplicated computation safe.
+     *
+     * <p>fleetd #395: also reports {@code exhaustionDetectionArmed}, one boolean per configured
+     * profile — {@code true} when that profile's {@code exhaustedPattern} is set, {@code false}
+     * when it is not, so an operator can tell "this profile is healthy" from "nothing can ever
+     * quarantine this profile" without reading {@code fleetd.yaml}. Unlike {@code quarantined}/
+     * {@code coolingOff}, this map always names every profile: an unarmed profile never enters a
+     * transient state to be absent from, so silence here would read as "healthy" rather than "not
+     * being watched at all".
      */
     public static Map<String, Object> profilesView(PeerLauncher workers, QuarantineSource quarantine, OutageSource outage) {
         Map<String, Object> result = new LinkedHashMap<>();
@@ -1116,7 +1150,9 @@ public final class FleetMcp {
         result.put("default", workers.defaultProfile() == null ? "" : workers.defaultProfile());
         Map<String, Object> quarantined = new LinkedHashMap<>();
         Map<String, Object> coolingOff = new LinkedHashMap<>();
+        Map<String, Object> exhaustionDetectionArmed = new LinkedHashMap<>();
         for (String profile : workers.profiles()) {
+            exhaustionDetectionArmed.put(profile, quarantine.exhaustedPatternArmed().apply(profile));
             String credentialId = quarantine.credentialIdFor().apply(profile);
             if (credentialId != null) {
                 quarantine.quarantine().remainingSeconds(credentialId).ifPresent(remaining -> {
@@ -1136,6 +1172,7 @@ public final class FleetMcp {
                 });
             }
         }
+        result.put("exhaustionDetectionArmed", exhaustionDetectionArmed);
         if (!quarantined.isEmpty()) {
             result.put("quarantined", quarantined);
         }
@@ -1663,7 +1700,11 @@ public final class FleetMcp {
                 "List the configured worker profiles (backends) and which one fleet_spawn uses by "
                         + "default. A 'quarantined' map is present when a backend-exhausted refusal put "
                         + "a profile's credential on cooldown — fleet_spawn onto it is refused until "
-                        + "quarantinedForSeconds elapses; a profile sharing that credential is listed too.",
+                        + "quarantinedForSeconds elapses; a profile sharing that credential is listed too. "
+                        + "'exhaustionDetectionArmed' reports, per profile, whether a usage-limit refusal "
+                        + "on it can EVER be classified and quarantined (its exhaustedPattern is "
+                        + "configured) — false means that profile's credential can never be quarantined "
+                        + "by this mechanism, however many usage-limit refusals it sees.",
                 objectSchema(Map.of(), List.of()));
     }
 

fleetd/src/main/java/dev/ltms/fleet/member/EnvAllowListScrub.java

@@ -75,9 +75,39 @@ import java.util.stream.Stream;
  * never to the control.
  *
  * <p>The scrub also writes {@code scrub-report.txt} into its own directory: one {@code allowed N of
- * M} line (N = exports left untouched, M = exports present when the scrub ran), then the blanked
- * NAMES — never values. The launcher reads this back at teardown and logs it, because a blocked
- * count next to an unknown denominator is not a finding.
+ * M failed F} line (N = exports left untouched, M = exports present when the scrub ran, F = names
+ * the scrub attempted to blank but could not), then the NAMES — blanked ones bare, unblankable ones
+ * {@code !}-prefixed — never values. The launcher reads this back at teardown and logs it, because a
+ * blocked count next to an unknown denominator is not a finding.
+ *
+ * <p><b>fleetd #394:</b> plain {@code export "$n="} is a FATAL error for a zsh read-only or special
+ * parameter (for example {@code UID}) — it aborts the whole sourced file, so every name still to
+ * come is never blanked and the report above is never written at all. The blanking loop instead
+ * routes each attempt through {@code eval}, which contains that error to the single iteration: the
+ * loop always finishes, and a name that could not be blanked is counted as {@code failed} and
+ * listed {@code !}-prefixed rather than silently disappearing. This is deliberately not a skip-list
+ * of known-bad names — every enumerated name is still attempted, so a name nobody has thought of
+ * yet still gets tried and, if it fails, still gets counted.
+ *
+ * <p>The blanking loop also re-asserts, on its own, the same {@code [A-Za-z_][A-Za-z0-9_]*} shape
+ * check the enumeration loop already applied. Before {@code eval} was introduced a non-conforming
+ * name reaching {@code export "$n="} was harmless either way — the quoting made it inert. With
+ * {@code eval}, the name is spliced into a string and interpreted as shell syntax, so the enumeration
+ * loop's check is no longer sufficient on its own to keep that call site safe — it is a guard on a
+ * different loop, and the two must not silently drift apart. Re-checking right before the
+ * {@code eval} keeps that call site safe by its own reading, independent of whatever the enumeration
+ * loop does or stops doing in a later change.
+ *
+ * <p><b>fleetd #400:</b> {@code eval}'s exit status is not proof that the blank actually happened.
+ * zsh coerces a bare {@code NAME=} assignment on an integer special parameter (measured on macOS zsh
+ * 5.9: {@code SECONDS}, {@code RANDOM}, {@code SHLVL}, {@code HISTSIZE}, {@code COLUMNS},
+ * {@code LINES}, {@code USERNAME}) to a number instead of failing — {@code eval} returns success,
+ * the value is untouched, and a status-based classification reports it as blanked when it was not.
+ * The fix classifies on the observed effect instead: after the attempt, the name's value is read
+ * back with the {@code (P)} indirection flag and the decision is made from whether that is now
+ * empty. This one check covers all three shapes a name can take at this point — a genuine blank, a
+ * fatal read-only error {@code eval} merely contained, and this silent no-op — and the exit status
+ * plays no part in the decision at all.
  */
 public final class EnvAllowListScrub {
 
@@ -132,10 +162,16 @@ public final class EnvAllowListScrub {
     }
 
     /**
-     * A parsed {@code scrub-report.txt}: how many exported variables existed when the scrub ran,
-     * how many were left untouched (allowed), and the NAMES that were blanked. Values never appear.
+     * A parsed {@code scrub-report.txt}: how many exported variables existed when the scrub ran
+     * ({@code total}), how many were left untouched ({@code allowed}), how many the scrub attempted
+     * to blank but could not ({@code failed} — fleetd #394: a zsh read-only/special parameter such
+     * as {@code UID} fatally errors on plain {@code export NAME=}, so those attempts go through
+     * {@code eval} instead so the loop keeps going and the failure is counted rather than left
+     * invisible), and the NAMES in each of the latter two categories. {@code allowed +
+     * blanked.size() + unblankable.size() == total}, and {@code unblankable.size() == failed}.
+     * Values never appear.
      */
-    record ScrubReport(int allowed, int total, List<String> blanked) {
+    record ScrubReport(int allowed, int total, int failed, List<String> blanked, List<String> unblankable) {
     }
 
     /**
@@ -334,38 +370,57 @@ public final class EnvAllowListScrub {
                   _cb633_blank+=("$_cb633_n")
                 done
 
-                # `export UID=` is not a failed command: it is a FATAL zsh parameter error
-                # ("failed to change user ID") that aborts this whole sourced file mid-loop,
-                # leaving every later name unscrubbed and the report below unwritten — silently,
-                # because of the 2>/dev/null. Neither `|| true` nor a `${(t)n}` type guard
-                # contains it; only `eval` does. `eval` is safe here precisely because the loop
-                # above already rejected every name that is not [A-Za-z_][A-Za-z0-9_]*, so
-                # nothing but a bare identifier can reach it.
+                # fleetd #394: plain `export "$n="` is FATAL for a zsh read-only/special parameter
+                # (e.g. UID) and aborts this whole sourced file — every name still to come is never
+                # blanked, and the report below is never written, silently. `eval` contains that
+                # error to the single iteration instead: it still fails for that one name, but the
+                # loop continues and we can tell allowed / blanked / unblankable apart afterwards.
+                # This is not a skip-list of known-bad names (that would miss the next one nobody
+                # thought of) — every name in _cb633_blank is still attempted, unconditionally.
+                # Every name reaching this loop already passed the identical identifier check in the
+                # enumeration loop above — but that guard is 20 lines away in a different loop, and
+                # this line is about to splice the name into a string handed to `eval`. Before this
+                # fix the name only ever reached `export` quoted ("$n="), which is inert on a
+                # non-identifier string either way; `eval` makes THIS line the only thing standing
+                # between such a string and code execution in the member's pane, so it re-asserts the
+                # same check on its own rather than trusting a guard it does not own. Under normal
+                # operation this can never fire (the enumeration guard already filtered everything
+                # reaching _cb633_blank), so a name caught here is counted as unblankable rather than
+                # silently dropped — it is real evidence that the upstream guard was bypassed.
                 #
-                # Enumerating the special names instead (UID|EUID|GID|EGID|PPID|LINENO) also
-                # works, but only for the ones enumerated: a special that turns up exported on
-                # some other host brings the abort straight back. `eval` contains all of them.
-                #
-                # Then VERIFY. A contained failure is still a failure, so a name that did not
-                # actually blank must not be reported as blanked. It currently falls into the
-                # "allowed" count, which is imprecise in the safe direction; the honest third
-                # count ("tried and could not blank") needs a report-format change and belongs
-                # with fleetd #394, not here.
-                typeset -a _cb633_done
-                _cb633_done=()
+                # fleetd #400: the attempt's own exit status is NOT proof of its effect. zsh coerces
+                # a bare `NAME=` assignment on an integer special parameter (SECONDS, RANDOM, SHLVL,
+                # HISTSIZE, COLUMNS, LINES, USERNAME on this host) to a number instead of failing —
+                # `eval` returns 0, the value is untouched, and the old exit-status check reported it
+                # as blanked when it was not. Classify on the observed effect instead: attempt the
+                # export, then read the name's value back with the `(P)` indirection flag and decide
+                # from whether it is now empty. One check then covers all three shapes a name can
+                # take here — a genuine blank, a fatal read-only error `eval` merely contained, and
+                # this silent no-op — without the exit status entering the decision at all.
+                typeset -a _cb633_ok _cb633_unblankable
+                _cb633_ok=()
+                _cb633_unblankable=()
                 for _cb633_n in "${_cb633_blank[@]}"; do
+                  if [[ ! "$_cb633_n" =~ ^[A-Za-z_][A-Za-z0-9_]*$ ]]; then
+                    _cb633_unblankable+=("$_cb633_n")
+                    continue
+                  fi
                   eval "export ${_cb633_n}=" 2>/dev/null
-                  [[ -z "${(P)_cb633_n}" ]] && _cb633_done+=("$_cb633_n")
+                  if [[ -z "${(P)_cb633_n}" ]]; then
+                    _cb633_ok+=("$_cb633_n")
+                  else
+                    _cb633_unblankable+=("$_cb633_n")
+                  fi
                 done
-                _cb633_blank=("${_cb633_done[@]}")
 
                 integer _cb633_kept=$(( _cb633_total - ${#_cb633_blank} ))
                 {
-                  print -r -- "allowed $_cb633_kept of $_cb633_total"
-                  for _cb633_n in "${_cb633_blank[@]}"; do print -r -- "$_cb633_n"; done
+                  print -r -- "allowed $_cb633_kept of $_cb633_total failed ${#_cb633_unblankable}"
+                  for _cb633_n in "${_cb633_ok[@]}"; do print -r -- "$_cb633_n"; done
+                  for _cb633_n in "${_cb633_unblankable[@]}"; do print -r -- "!$_cb633_n"; done
                 } > "$ZDOTDIR/%s" 2>/dev/null
 
-                unset _cb633_done _cb633_allowed _cb633_names _cb633_blank _cb633_n _cb633_total _cb633_kept
+                unset _cb633_allowed _cb633_names _cb633_blank _cb633_ok _cb633_unblankable _cb633_n _cb633_total _cb633_kept
                 """.formatted(names, MemberEnvAllowList.zshCasePattern(), REPORT_FILE);
     }
 
@@ -379,6 +434,11 @@ public final class EnvAllowListScrub {
      * Read and parse {@link #REPORT_FILE} out of a generated ZDOTDIR directory. Returns {@code null}
      * when absent or unreadable (the pane may have been torn down before its login shell ever got to
      * the scrub) — callers treat that as "no measurement available", never as success.
+     *
+     * <p>First line is {@code "allowed <N> of <M> failed <F>"} (fleetd #394 added the trailing
+     * {@code failed <F>} — a count of names the scrub attempted to blank but could not, e.g. a zsh
+     * read-only/special parameter). Every following non-blank line is a name: a bare name was
+     * blanked, a {@code !}-prefixed name was attempted and failed. Values never appear on either.
      */
     static ScrubReport readReport(Path zdotdir) {
         Path report = zdotdir.resolve(REPORT_FILE);
@@ -391,17 +451,24 @@ public final class EnvAllowListScrub {
                 return null;
             }
             String[] parts = lines.getFirst().substring("allowed ".length()).trim().split("\\s+");
-            if (parts.length != 3 || !"of".equals(parts[1])) {
+            if (parts.length != 5 || !"of".equals(parts[1]) || !"failed".equals(parts[3])) {
                 return null;
             }
             List<String> blanked = new ArrayList<>();
+            List<String> unblankable = new ArrayList<>();
             for (int i = 1; i < lines.size(); i++) {
-                if (!lines.get(i).isBlank()) {
-                    blanked.add(lines.get(i));
+                String line = lines.get(i);
+                if (line.isBlank()) {
+                    continue;
+                }
+                if (line.startsWith("!")) {
+                    unblankable.add(line.substring(1));
+                } else {
+                    blanked.add(line);
                 }
             }
             return new ScrubReport(Integer.parseInt(parts[0]), Integer.parseInt(parts[2]),
-                    List.copyOf(blanked));
+                    Integer.parseInt(parts[4]), List.copyOf(blanked), List.copyOf(unblankable));
         } catch (IOException | NumberFormatException e) {
             return null;
         }

fleetd/src/main/java/dev/ltms/fleet/member/HerdrPeerLauncher.java

@@ -1643,11 +1643,19 @@ public abstract class HerdrPeerLauncher implements PeerLauncher {
             log.warn("memberCredentials allow-list: pane {} left no scrub report in {} — the "
                     + "environment scrub cannot be confirmed to have run. Either the pane ended "
                     + "before its shell finished starting, or its shell never read our generated "
-                    + "startup files, in which case that member saw the full host environment.",
+                    + "startup files. Either way, we cannot tell from here whether the scrub ran, "
+                    + "so we do not know what that member's environment contained.",
                     paneId, dir);
         } else {
             log.info("memberCredentials allow-list: pane {} allowed {} of {} environment variables",
                     paneId, report.allowed(), report.total());
+            if (report.failed() > 0) {
+                log.warn("memberCredentials allow-list: pane {} could not blank {} environment "
+                        + "variable(s) — {} (likely a zsh read-only/special parameter) — those "
+                        + "names were left in the member's environment. Confirm none of them is a "
+                        + "credential.",
+                        paneId, report.failed(), report.unblankable());
+            }
             List<String> shaped = report.blanked().stream()
                     .filter(name -> CREDENTIAL_SHAPED_NAME.matcher(name).matches())
                     .toList();

fleetd/src/main/java/dev/ltms/fleet/msg/MessageService.java

@@ -1317,6 +1317,27 @@ public final class MessageService {
         return new TaskView(ticket, Phase.FAILED, null, null, detail, null);
     }
 
+    /**
+     * Test seam only — carries no production behaviour, and nothing in this class calls it;
+     * {@link #pruneTerminalTickets} still reads {@link Task#completedNanos} directly.
+     *
+     * <p>Reports whether {@code ticket}'s completion hook (the {@code whenComplete} registered in
+     * {@link Task}'s constructor) has actually run yet. Exists because {@link #poll} can report
+     * {@link Phase#DONE} for a ticket before that hook fires: {@code CompletableFuture.complete()}
+     * publishes its result and only afterwards runs dependent actions such as {@code whenComplete}
+     * (fleetd #399), so a caller that observes the future done via {@link #poll} is not thereby
+     * guaranteed to also observe {@link Task#completedNanos} stamped. A test that must order both
+     * events — e.g. before advancing an injected clock past the TTL, to avoid stamping the
+     * *advanced* time and masking a real eviction bug — waits on this instead of on
+     * {@link Phase#DONE}.
+     *
+     * @return {@code false} for an unknown ticket or one whose completion hook has not run yet
+     */
+    boolean isCompletionStampedForTest(String ticket) {
+        Task task = tasks.get(ticket);
+        return task != null && task.completedNanos != null;
+    }
+
     /** Best-effort live worker status for a pending poll; never throws (a lookup error is just noise). */
     private String liveStatus(String target) {
         try {

fleetd/src/test/java/dev/ltms/fleet/ExhaustedPatternGapReportTest.java

@@ -0,0 +1,150 @@
+package dev.ltms.fleet;
+
+import ch.qos.logback.classic.Level;
+import ch.qos.logback.classic.Logger;
+import ch.qos.logback.classic.spi.ILoggingEvent;
+import ch.qos.logback.core.read.ListAppender;
+import dev.ltms.fleet.config.FleetConfig;
+import org.junit.jupiter.api.Test;
+import org.junit.jupiter.api.io.TempDir;
+import org.slf4j.LoggerFactory;
+
+import java.nio.file.Files;
+import java.nio.file.Path;
+import java.util.List;
+
+import static org.junit.jupiter.api.Assertions.assertFalse;
+import static org.junit.jupiter.api.Assertions.assertTrue;
+
+/**
+ * fleetd #395: {@code exhaustedPattern} (see {@link FleetConfig.Profile#exhaustedPattern}) is
+ * deliberately opt-in — an unset one leaves usage-limit detection silently OFF for that profile,
+ * and nothing quarantines its credential. {@link Fleetd#reportExhaustedPatternGap} must say so at
+ * startup, naming every unarmed profile, and must never fire when every profile is armed. Mirrors
+ * {@link MemberCredentialsGapReportTest}'s pattern, capturing the real log via a
+ * {@link ListAppender}.
+ *
+ * <p>The 8-profile shape in {@link #theLiveEightProfileShapeWarnsExactlyTheSixUnarmedProfiles} is
+ * the live {@code fleetd.yaml} shape measured 2026-09-10 (fleetd #395's own ticket): 6 of 8
+ * profiles unarmed, 2 of those 6 ({@code opus}, {@code sonnet}) running on the operator's Claude
+ * subscription. {@code fleetd.yaml} itself is gitignored and unavailable to this test, so the
+ * shape is reproduced as a throwaway config in a {@code @TempDir} rather than read off disk.
+ */
+class ExhaustedPatternGapReportTest {
+
+    private static FleetConfig load(Path dir, String yaml) throws Exception {
+        Path f = dir.resolve("fleetd.yaml");
+        Files.writeString(f, yaml);
+        return FleetConfig.load(f);
+    }
+
+    private static ListAppender<ILoggingEvent> attach() {
+        Logger logger = (Logger) LoggerFactory.getLogger(Fleetd.class);
+        ListAppender<ILoggingEvent> appender = new ListAppender<>();
+        appender.start();
+        logger.addAppender(appender);
+        return appender;
+    }
+
+    private static void detach(ListAppender<ILoggingEvent> appender) {
+        ((Logger) LoggerFactory.getLogger(Fleetd.class)).detachAppender(appender);
+    }
+
+    /** Every profile name mentioned by a WARN-level log line, across every WARN this call produced. */
+    private static List<String> warnMessages(ListAppender<ILoggingEvent> appender) {
+        return appender.list.stream()
+                .filter(e -> e.getLevel() == Level.WARN)
+                .map(ILoggingEvent::getFormattedMessage)
+                .toList();
+    }
+
+    @Test
+    void theLiveEightProfileShapeWarnsExactlyTheSixUnarmedProfiles(@TempDir Path dir) throws Exception {
+        // Reproduces the live shape measured 2026-09-10: 8 profiles, 2 armed (sol, terra), 6
+        // unarmed (local, local-direct, gx, opus, sonnet, xf) — 2 of the unarmed 6 (opus, sonnet)
+        // are subscription: true.
+        FleetConfig cfg = load(dir, """
+                profiles:
+                  local:
+                    baseUrl: http://gx00.gw:8000
+                  local-direct:
+                    baseUrl: http://gx01.gw:8000
+                  gx:
+                    kind: opencode
+                    baseUrl: https://llm.ltms.dev/v1
+                  opus:
+                    subscription: true
+                    model: claude-opus-5
+                  sonnet:
+                    subscription: true
+                    model: claude-sonnet-5
+                  sol:
+                    baseUrl: https://llm.ltms.dev/v1
+                    exhaustedPattern: "The usage limit has been reached"
+                  terra:
+                    baseUrl: https://llm.ltms.dev/v1
+                    exhaustedPattern: "The usage limit has been reached"
+                  xf:
+                    baseUrl: https://llm.ltms.dev/v1
+                """);
+
+        ListAppender<ILoggingEvent> appender = attach();
+        try {
+            Fleetd.reportExhaustedPatternGap(cfg);
+        } finally {
+            detach(appender);
+        }
+
+        List<String> warns = warnMessages(appender);
+        assertFalse(warns.isEmpty(), "6 of 8 profiles are unarmed — at least one WARN must fire");
+
+        // Exactly one WARN aggregates every unarmed profile, naming all 6 and none of the 2 armed.
+        String aggregate = warns.stream()
+                .filter(m -> m.contains("no exhaustedPattern configured"))
+                .findFirst()
+                .orElseThrow(() -> new AssertionError("expected an aggregate unarmed-profiles WARN: " + warns));
+        for (String unarmed : List.of("local", "local-direct", "gx", "opus", "sonnet", "xf")) {
+            assertTrue(aggregate.contains(unarmed), "aggregate WARN must name '" + unarmed + "': " + aggregate);
+        }
+        for (String armed : List.of("sol", "terra")) {
+            assertFalse(aggregate.contains(armed), "aggregate WARN must NOT name armed profile '" + armed + "': " + aggregate);
+        }
+
+        // A second, louder WARN calls out the subscription profiles specifically.
+        String subscriptionWarn = warns.stream()
+                .filter(m -> m.contains("metered Claude plan"))
+                .findFirst()
+                .orElseThrow(() -> new AssertionError("expected a subscription-specific WARN: " + warns));
+        assertTrue(subscriptionWarn.contains("opus"), subscriptionWarn);
+        assertTrue(subscriptionWarn.contains("sonnet"), subscriptionWarn);
+        assertFalse(subscriptionWarn.contains("local-direct"),
+                "the subscription WARN must not name a non-subscription profile: " + subscriptionWarn);
+    }
+
+    @Test
+    void everyProfileArmedProducesNoWarningAtAll(@TempDir Path dir) throws Exception {
+        FleetConfig cfg = load(dir, """
+                profiles:
+                  sol:
+                    baseUrl: https://llm.ltms.dev/v1
+                    exhaustedPattern: "The usage limit has been reached"
+                  terra:
+                    baseUrl: https://llm.ltms.dev/v1
+                    exhaustedPattern: "The usage limit has been reached"
+                  opus:
+                    subscription: true
+                    model: claude-opus-5
+                    exhaustedPattern: "5-hour limit reached"
+                """);
+
+        ListAppender<ILoggingEvent> appender = attach();
+        try {
+            Fleetd.reportExhaustedPatternGap(cfg);
+        } finally {
+            detach(appender);
+        }
+
+        assertTrue(warnMessages(appender).isEmpty(),
+                "every profile is armed — a checker that warns anyway always fires: " + warnMessages(appender));
+    }
+}

fleetd/src/test/java/dev/ltms/fleet/FleetdCapacitySourceWiringTest.java

@@ -0,0 +1,155 @@
+package dev.ltms.fleet;
+
+import dev.ltms.fleet.config.ConfigRef;
+import dev.ltms.fleet.config.FleetConfig;
+import dev.ltms.fleet.mcp.FleetMcp;
+import org.junit.jupiter.api.DisplayName;
+import org.junit.jupiter.api.Test;
+import org.junit.jupiter.api.io.TempDir;
+
+import java.nio.file.Files;
+import java.nio.file.Path;
+
+import static org.junit.jupiter.api.Assertions.assertFalse;
+import static org.junit.jupiter.api.Assertions.assertTrue;
+import static org.junit.jupiter.api.Assertions.assertEquals;
+
+/**
+ * fleetd #416: {@code fleet_list}'s {@code CapacitySource.configuredProfiles} must enumerate the
+ * <em>startup</em> profile set, not the live, hot-reloaded one.
+ *
+ * <p>{@code profiles} as a whole is a {@code DEFERRED} key ({@link ConfigRef#DEFERRED_KEYS}):
+ * {@code HerdrPeerLauncher} takes {@code Map.copyOf(profiles)} once at construction, so a profile
+ * only added to the hot-reloaded map can never actually be spawned. Before this fix, {@code
+ * Fleetd.main} built {@code CapacitySource} with {@code () -> config.get().profiles().keySet()} —
+ * the live map — so {@code fleet_list} would report a freshly hot-reloaded profile as available
+ * ({@code free > 0}) while {@code fleet_spawn} on that same profile failed with
+ * {@code unknown worker profile}. Measured on another host: adding a throwaway profile and letting
+ * it hot-reload gave {@code fleet_list} -> {@code free: 3} and {@code fleet_spawn} ->
+ * {@code error: unknown worker profile}.
+ *
+ * <p>This test needs a reload, the same reason {@link FleetdExhaustionDetectionArmedWiringTest}
+ * does: at startup the two snapshots agree, so a test of only a newly started daemon would not
+ * detect a live {@code config.get()} lookup for the set.
+ *
+ * <p><b>maxLoad must stay hot.</b> It is read off {@code config.get()} exactly like
+ * {@code credentialId} ({@link ConfigRef} documents both as hot, "read live off the config
+ * supplier ... exactly like weight/maxLoad"), so a reload that only changes an existing profile's
+ * {@code maxLoad} — no add/remove — must still change what {@code fleet_list} reports without a
+ * restart. A fix that freezes the whole {@code CapacitySource} against {@code cfg} (rather than
+ * only its {@code configuredProfiles} set) would trade this bug for its mirror image and is pinned
+ * wrong by {@link #reloadedMaxLoadStillChangesWhatFleetListReports}.
+ */
+class FleetdCapacitySourceWiringTest {
+
+    private static final String STARTUP = """
+            bind:
+              host: 127.0.0.1
+              port: 8765
+            herdrSocket: ~/.config/herdr/herdr.sock
+            profiles:
+              terra:
+                baseUrl: http://gx00.gw:8000
+                model: terra
+                maxLoad: 3
+            guard:
+              offSubscriptionHosts:
+                - gx00.gw
+            """;
+
+    private static final String WITH_NEW_PROFILE = """
+            bind:
+              host: 127.0.0.1
+              port: 8765
+            herdrSocket: ~/.config/herdr/herdr.sock
+            profiles:
+              terra:
+                baseUrl: http://gx00.gw:8000
+                model: terra
+                maxLoad: 3
+              ghost404:
+                baseUrl: http://gx00.gw:8001
+                model: ghost404
+                maxLoad: 3
+            guard:
+              offSubscriptionHosts:
+                - gx00.gw
+            """;
+
+    private static final String WITH_CHANGED_MAX_LOAD = """
+            bind:
+              host: 127.0.0.1
+              port: 8765
+            herdrSocket: ~/.config/herdr/herdr.sock
+            profiles:
+              terra:
+                baseUrl: http://gx00.gw:8000
+                model: terra
+                maxLoad: 9
+            guard:
+              offSubscriptionHosts:
+                - gx00.gw
+            """;
+
+    @Test
+    @DisplayName("a profile present only in the live (hot-reloaded) config is NOT listed")
+    void liveOnlyProfileIsNotListed(@TempDir Path dir) throws Exception {
+        Path file = dir.resolve("fleetd.yaml");
+        Files.writeString(file, STARTUP);
+        FleetConfig cfg = FleetConfig.load(file);
+        ConfigRef config = new ConfigRef(file, cfg);
+
+        Files.writeString(file, WITH_NEW_PROFILE);
+        assertTrue(config.reload().applied());
+        // The live snapshot now has the new profile — proves the reload really happened and this
+        // test is not accidentally passing because nothing changed.
+        assertTrue(config.get().profiles().containsKey("ghost404"));
+
+        FleetMcp.CapacitySource source = Fleetd.capacitySource(config, cfg, _ -> 0);
+
+        assertFalse(source.configuredProfiles().get().contains("ghost404"),
+                "a profile added only to the hot-reloaded config must not be listed by fleet_list — "
+                        + "HerdrPeerLauncher never learns about it until a restart, so fleet_spawn on it "
+                        + "would fail with 'unknown worker profile' while fleet_list claimed it free");
+    }
+
+    @Test
+    @DisplayName("a profile present in the startup set IS listed")
+    void startupProfileIsListed(@TempDir Path dir) throws Exception {
+        Path file = dir.resolve("fleetd.yaml");
+        Files.writeString(file, STARTUP);
+        FleetConfig cfg = FleetConfig.load(file);
+        ConfigRef config = new ConfigRef(file, cfg);
+
+        FleetMcp.CapacitySource source = Fleetd.capacitySource(config, cfg, _ -> 0);
+
+        // fleetd #416, both-directions requirement: a test that only ever passes an empty/absent
+        // startup set (the case above) cannot tell a correct lookup from one that is permanently
+        // empty (e.g. a mutation replacing the supplier with Set::of). This is the direction that
+        // fails if the fix regresses to reporting nothing at all.
+        assertTrue(source.configuredProfiles().get().contains("terra"),
+                "a profile present in the startup snapshot must still be listed by fleet_list");
+    }
+
+    @Test
+    @DisplayName("a hot maxLoad edit still changes what fleet_list reports")
+    void reloadedMaxLoadStillChangesWhatFleetListReports(@TempDir Path dir) throws Exception {
+        Path file = dir.resolve("fleetd.yaml");
+        Files.writeString(file, STARTUP);
+        FleetConfig cfg = FleetConfig.load(file);
+        ConfigRef config = new ConfigRef(file, cfg);
+
+        FleetMcp.CapacitySource source = Fleetd.capacitySource(config, cfg, _ -> 0);
+        assertEquals(3, source.maxLoad().apply("terra"),
+                "sanity: maxLoad reads 3 from the startup config before any reload");
+
+        Files.writeString(file, WITH_CHANGED_MAX_LOAD);
+        assertTrue(config.reload().applied());
+
+        assertEquals(9, source.maxLoad().apply("terra"),
+                "maxLoad must stay hot — the SAME CapacitySource instance must reflect a reloaded "
+                        + "maxLoad without a restart, exactly like credentialId. Freezing the whole "
+                        + "CapacitySource against the startup snapshot (rather than only its "
+                        + "configuredProfiles set) would trade fleetd #416 for its mirror image.");
+    }
+}

fleetd/src/test/java/dev/ltms/fleet/FleetdExhaustionDetectionArmedWiringTest.java

@@ -0,0 +1,94 @@
+package dev.ltms.fleet;
+
+import dev.ltms.fleet.config.ConfigRef;
+import dev.ltms.fleet.config.FleetConfig;
+import dev.ltms.fleet.mcp.FleetMcp;
+import dev.ltms.fleet.placement.BackendQuarantine;
+import org.junit.jupiter.api.DisplayName;
+import org.junit.jupiter.api.Test;
+import org.junit.jupiter.api.io.TempDir;
+
+import java.nio.file.Files;
+import java.nio.file.Path;
+import java.util.Map;
+import java.util.regex.Pattern;
+import static org.junit.jupiter.api.Assertions.assertFalse;
+import static org.junit.jupiter.api.Assertions.assertTrue;
+
+/**
+ * fleetd #404: {@code exhaustionDetectionArmed} must describe the startup pattern map, not the
+ * reloaded config snapshot.
+ *
+ * <p>This test needs a reload. At startup the two snapshots agree, so a test of only a newly
+ * started daemon would not detect a live {@code config.get()} lookup in the report field.
+ */
+class FleetdExhaustionDetectionArmedWiringTest {
+
+    private static final String NO_PATTERN = """
+            bind:
+              host: 127.0.0.1
+              port: 8765
+            herdrSocket: ~/.config/herdr/herdr.sock
+            profiles:
+              terra:
+                baseUrl: http://gx00.gw:8000
+                model: terra
+            guard:
+              offSubscriptionHosts:
+                - gx00.gw
+            """;
+
+    private static final String WITH_PATTERN = """
+            bind:
+              host: 127.0.0.1
+              port: 8765
+            herdrSocket: ~/.config/herdr/herdr.sock
+            profiles:
+              terra:
+                baseUrl: http://gx00.gw:8000
+                model: terra
+                exhaustedPattern: "usage limit"
+            guard:
+              offSubscriptionHosts:
+                - gx00.gw
+            """;
+
+    @Test
+    @DisplayName("reloading an exhaustedPattern does not arm the startup detection source")
+    void reloadedPatternDoesNotChangeTheArmedFieldUntilRestart(@TempDir Path dir) throws Exception {
+        Path file = dir.resolve("fleetd.yaml");
+        Files.writeString(file, NO_PATTERN);
+        ConfigRef config = new ConfigRef(file, FleetConfig.load(file));
+
+        Files.writeString(file, WITH_PATTERN);
+        assertTrue(config.reload().applied());
+        assertTrue(config.get().profiles().get("terra").hasExhaustedPattern());
+
+        FleetMcp.QuarantineSource source = Fleetd.quarantineSource(config, BackendQuarantine.none(),
+                Map.of());
+        assertFalse(source.exhaustedPatternArmed().apply("terra"),
+                "exhaustionDetectionArmed must use the startup pattern map, not config.get()");
+    }
+
+    @Test
+    @DisplayName("a profile in the startup pattern map is reported as armed")
+    void aProfileInTheStartupMapIsArmed(@TempDir Path dir) throws Exception {
+        // fleetd #404, second direction. The test above only ever passes an EMPTY startup map, so
+        // it cannot tell a correct lookup from one that is permanently off. Measured: replacing the
+        // armed lambda with `profile -> false` left the whole suite green at 1475 tests. That
+        // mutation would make #395's visibility feature dead — an operator fixing a detection gap
+        // would be told the gap is still open after fixing it, forever. Both directions are needed:
+        // this test is the only thing that fails when the field stops reporting armed at all.
+        Path file = dir.resolve("fleetd.yaml");
+        Files.writeString(file, WITH_PATTERN);
+        ConfigRef config = new ConfigRef(file, FleetConfig.load(file));
+
+        FleetMcp.QuarantineSource source = Fleetd.quarantineSource(config, BackendQuarantine.none(),
+                Map.of("terra", Pattern.compile("usage limit")));
+
+        assertTrue(source.exhaustedPatternArmed().apply("terra"),
+                "a profile whose pattern was compiled at startup must report armed");
+        assertFalse(source.exhaustedPatternArmed().apply("sonnet"),
+                "a profile absent from the startup map must not report armed");
+    }
+}

fleetd/src/test/java/dev/ltms/fleet/FleetdStartupValidationTest.java

@@ -0,0 +1,132 @@
+package dev.ltms.fleet;
+
+import org.junit.jupiter.api.Test;
+import org.junit.jupiter.api.io.TempDir;
+
+import java.nio.file.Files;
+import java.nio.file.Path;
+
+import static org.junit.jupiter.api.Assertions.assertThrows;
+import static org.junit.jupiter.api.Assertions.assertTrue;
+
+/**
+ * Proves the one thing no test proved before this ticket's follow-up: that {@code Fleetd.main}
+ * ITSELF — not a copy of its logic, not the validator called directly — still refuses to start on
+ * a bad config. Mutation testing found that deleting {@code cfg.validateAll();} (née six
+ * individual {@code cfg.validateXxx();} calls) from {@code Fleetd.main} left the full 1478-test
+ * suite green; every existing test called a validator directly and none exercised {@code
+ * Fleetd.main} as the caller. See {@code FleetConfigValidateAllTest} for why the fix collapses
+ * those six calls into one reflective {@link FleetConfig#validateAll()}, and {@code
+ * ConfigRefTest} for the equivalent proof on the {@link
+ * dev.ltms.fleet.config.ConfigRef#reload()} path.
+ *
+ * <p>This is deliberately the real {@code static void main(String[] args)} — package-private, so
+ * only a test in this package can call it, which is exactly what makes this proof strong: it is
+ * not a helper extracted for testability, it is the literal method {@code java -jar fleetd.jar}
+ * invokes. Every fixture below is otherwise-valid and fails exactly one validator, and — because
+ * {@link FleetConfig#validateAll()} runs immediately after {@code SubscriptionGuard.
+ * assertPrimaryClean}, before {@code main} opens the herdr socket, binds Javalin, or touches
+ * anything else with a real side effect — calling {@code Fleetd.main} with one of these configs is
+ * safe: it is guaranteed to throw before reaching any of that, precisely because the config is
+ * deliberately invalid.
+ */
+class FleetdStartupValidationTest {
+
+    private static void assertMainRefuses(Path dir, String fileName, String yaml,
+                                           String mustContain) throws Exception {
+        Path f = dir.resolve(fileName);
+        Files.writeString(f, yaml);
+        IllegalStateException e = assertThrows(IllegalStateException.class,
+                () -> Fleetd.main(new String[]{f.toString()}),
+                fileName + ": Fleetd.main must refuse this config before doing anything else");
+        assertTrue(e.getMessage().contains(mustContain),
+                fileName + ": expected message to contain \"" + mustContain + "\" but was: "
+                        + e.getMessage());
+    }
+
+    @Test
+    void mainRefusesANonLoopbackBindWithoutTokenMode(@TempDir Path dir) throws Exception {
+        assertMainRefuses(dir, "auth-exposure.yaml", """
+                bind:
+                  host: 0.0.0.0
+                  port: 8765
+                """, "auth.mode: token");
+    }
+
+    @Test
+    void mainRefusesALeadTabPrefixCollision(@TempDir Path dir) throws Exception {
+        assertMainRefuses(dir, "lead-tab-prefixes.yaml", """
+                bind:
+                  host: 127.0.0.1
+                  port: 8765
+                fleet:
+                  tabLabel: "lead: {role} {profile}"
+                  leaders:
+                    opus:
+                      tab: "lead: opus"
+                """, "fleet.tabLabel");
+    }
+
+    @Test
+    void mainRefusesASubscriptionProfileThatReseatsAnthropicBaseUrl(@TempDir Path dir)
+            throws Exception {
+        assertMainRefuses(dir, "subscription-profiles.yaml", """
+                bind:
+                  host: 127.0.0.1
+                  port: 8765
+                profiles:
+                  sonnet:
+                    subscription: true
+                    argv: ["ccs", "sonnet"]
+                    env:
+                      ANTHROPIC_BASE_URL: http://anything-not-on-the-allowlist
+                """, "ANTHROPIC_BASE_URL");
+    }
+
+    @Test
+    void mainRefusesAnUnknownCharterKey(@TempDir Path dir) throws Exception {
+        assertMainRefuses(dir, "charters.yaml", """
+                bind:
+                  host: 127.0.0.1
+                  port: 8765
+                fleet:
+                  charters:
+                    architetc: text
+                """, "architetc");
+    }
+
+    @Test
+    void mainRefusesAnArchitectSlotNamingAnUnconfiguredProfile(@TempDir Path dir) throws Exception {
+        assertMainRefuses(dir, "members.yaml", """
+                bind:
+                  host: 127.0.0.1
+                  port: 8765
+                profiles:
+                  gx10:
+                    baseUrl: http://gx10.gw:8000
+                fleet:
+                  architects:
+                    lead-designer:
+                      profile: sonnet
+                """, "lead-designer");
+    }
+
+    @Test
+    void mainRefusesAProfileNamingAModelOutsideTheAllowList(@TempDir Path dir) throws Exception {
+        assertMainRefuses(dir, "models.yaml", """
+                bind:
+                  host: 127.0.0.1
+                  port: 8765
+                profiles:
+                  sonnet:
+                    baseUrl: http://gx10.gw:8000
+                    model: claude-sonnet-5
+                  rogue:
+                    baseUrl: http://gx11.gw:8000
+                    model: claude-opus-9000
+                models:
+                  allow:
+                    - model: claude-sonnet-5
+                """, "rogue");
+    }
+}

fleetd/src/test/java/dev/ltms/fleet/config/ConfigRefTopLevelReportingCoverageTest.java

@@ -109,6 +109,8 @@ class ConfigRefTopLevelReportingCoverageTest {
         v.put("memberLoginShell", null);
         v.put("memberSkills", "/skills/a");
         v.put("idleSleepGuard", new FleetConfig.IdleSleepGuard(true));
+        v.put("models", new FleetConfig.Models(
+                List.of(new FleetConfig.Models.ModelEntry("model-a"))));
         assertNamesMatchComponents(v);
         return v;
     }
@@ -151,6 +153,8 @@ class ConfigRefTopLevelReportingCoverageTest {
         v.put("memberLoginShell", null);
         v.put("memberSkills", "/skills/b");
         v.put("idleSleepGuard", new FleetConfig.IdleSleepGuard(false));
+        v.put("models", new FleetConfig.Models(
+                List.of(new FleetConfig.Models.ModelEntry("model-b"))));
         assertNamesMatchComponents(v);
         return v;
     }

fleetd/src/test/java/dev/ltms/fleet/config/FleetConfigTest.java

@@ -2683,4 +2683,222 @@ class FleetConfigTest {
         assertTrue(cfg.idleSleepGuard().isEnabled(),
                 "unlike ConfigReload/Health, this block defaults to ON even when present but empty");
     }
+
+    // --- models: central allow-list of usable models -----------------------------------------
+
+    /**
+     * An absent {@code models:} block is today's behaviour exactly: no profile's {@code model:} is
+     * checked against anything, whatever it says. This is the "existing config keeps working"
+     * invariant — an operator on a gitignored {@code fleetd.yaml} that predates this feature must
+     * not be broken by upgrading the daemon.
+     */
+    @Test
+    void absentModelsBlockValidatesNothing(@TempDir Path dir) throws Exception {
+        Path f = dir.resolve("fleetd.yaml");
+        Files.writeString(f, """
+                bind:
+                  port: 8080
+                profiles:
+                  gx10:
+                    baseUrl: http://gx10.gw:8000
+                    model: totally-unheard-of-model-xyz
+                """);
+
+        FleetConfig cfg = FleetConfig.load(f);
+        assertDoesNotThrow(cfg::validateModels);
+    }
+
+    /**
+     * {@code models:} present but with an empty (or absent) {@code allow:} must behave exactly like
+     * the block being absent — an operator adding the block for the first time with nothing in it
+     * yet must not be surprised by every profile suddenly refusing to start.
+     */
+    @Test
+    void modelsBlockPresentButEmptyValidatesNothing(@TempDir Path dir) throws Exception {
+        Path f = dir.resolve("fleetd.yaml");
+        Files.writeString(f, """
+                bind:
+                  port: 8080
+                profiles:
+                  gx10:
+                    baseUrl: http://gx10.gw:8000
+                    model: whatever-the-operator-typed
+                models:
+                  allow: []
+                """);
+
+        FleetConfig cfg = FleetConfig.load(f);
+        assertDoesNotThrow(cfg::validateModels);
+    }
+
+    /**
+     * The core of the ticket: a profile naming a model outside the configured allow-list fails
+     * config load, naming both the model and the profile that wanted it.
+     */
+    @Test
+    void aProfileNamingAModelOutsideTheAllowListRefusesToStart(@TempDir Path dir) throws Exception {
+        Path f = dir.resolve("fleetd.yaml");
+        Files.writeString(f, """
+                bind:
+                  port: 8080
+                profiles:
+                  sonnet:
+                    baseUrl: http://gx10.gw:8000
+                    model: claude-sonnet-5
+                  rogue:
+                    baseUrl: http://gx11.gw:8000
+                    model: claude-opus-9000
+                models:
+                  allow:
+                    - model: claude-sonnet-5
+                    - model: claude-haiku-5
+                """);
+        FleetConfig cfg = FleetConfig.load(f);
+
+        IllegalStateException e = assertThrows(IllegalStateException.class, cfg::validateModels);
+        assertTrue(e.getMessage().contains("rogue"), "the refusal names the offending profile");
+        assertTrue(e.getMessage().contains("claude-opus-9000"), "the refusal names the offending model");
+        assertFalse(e.getMessage().contains("'sonnet'"),
+                "the profile whose model IS allowed must not be reported");
+    }
+
+    /** A profile whose {@code model:} is on the allow-list loads fine. */
+    @Test
+    void aProfileNamingAModelOnTheAllowListLoadsFine(@TempDir Path dir) throws Exception {
+        Path f = dir.resolve("fleetd.yaml");
+        Files.writeString(f, """
+                bind:
+                  port: 8080
+                profiles:
+                  sonnet:
+                    baseUrl: http://gx10.gw:8000
+                    model: claude-sonnet-5
+                models:
+                  allow:
+                    - model: claude-sonnet-5
+                """);
+
+        FleetConfig cfg = FleetConfig.load(f);
+        assertDoesNotThrow(cfg::validateModels);
+    }
+
+    /**
+     * A profile that never sets {@code model:} (a {@code subscription: true} profile relying on the
+     * account's own default is the live example) must not be refused just because an allow-list is
+     * active — there is nothing to check it against.
+     */
+    @Test
+    void aProfileWithNoModelPassesEvenWithAnActiveAllowList(@TempDir Path dir) throws Exception {
+        Path f = dir.resolve("fleetd.yaml");
+        Files.writeString(f, """
+                bind:
+                  port: 8080
+                profiles:
+                  opus:
+                    subscription: true
+                models:
+                  allow:
+                    - model: claude-sonnet-5
+                """);
+
+        FleetConfig cfg = FleetConfig.load(f);
+        assertDoesNotThrow(cfg::validateModels);
+    }
+
+    /**
+     * Reproduces the live config shape this ticket measured: a mix of {@code amazon-bedrock},
+     * {@code opencode} and {@code openai}-backed profiles, some naming a bare Claude id and some a
+     * provider-prefixed opencode id, in ONE allow-list. Both forms are just opaque strings compared
+     * for exact equality — proves the shape decision holds against the shape actually seen live,
+     * not just against a synthetic single-provider example.
+     */
+    @Test
+    void aBareClaudeIdAndAnOpencodeProviderPrefixedIdBothFitOneAllowList(@TempDir Path dir) throws Exception {
+        Path f = dir.resolve("fleetd.yaml");
+        Files.writeString(f, """
+                bind:
+                  port: 8080
+                profiles:
+                  sonnet:
+                    baseUrl: http://gx10.gw:8000
+                    model: claude-sonnet-5
+                  terra:
+                    kind: opencode
+                    model: openai/gpt-5.6-terra
+                  nova:
+                    kind: opencode
+                    model: amazon-bedrock/amazon.nova-pro-v1:0
+                models:
+                  allow:
+                    - model: claude-sonnet-5
+                    - model: openai/gpt-5.6-terra
+                    - model: amazon-bedrock/amazon.nova-pro-v1:0
+                """);
+
+        FleetConfig cfg = FleetConfig.load(f);
+        assertDoesNotThrow(cfg::validateModels);
+    }
+
+    /** The same live shape, but one opencode profile's model is missing from the allow-list. */
+    @Test
+    void anUnlistedOpencodeProviderPrefixedModelRefusesToStart(@TempDir Path dir) throws Exception {
+        Path f = dir.resolve("fleetd.yaml");
+        Files.writeString(f, """
+                bind:
+                  port: 8080
+                profiles:
+                  sonnet:
+                    baseUrl: http://gx10.gw:8000
+                    model: claude-sonnet-5
+                  terra:
+                    kind: opencode
+                    model: openai/gpt-5.6-terra-withdrawn
+                models:
+                  allow:
+                    - model: claude-sonnet-5
+                    - model: openai/gpt-5.6-terra
+                """);
+        FleetConfig cfg = FleetConfig.load(f);
+
+        IllegalStateException e = assertThrows(IllegalStateException.class, cfg::validateModels);
+        assertTrue(e.getMessage().contains("terra"), "the refusal names the offending profile");
+        assertTrue(e.getMessage().contains("openai/gpt-5.6-terra-withdrawn"),
+                "the refusal names the offending model, with its provider prefix intact");
+    }
+
+    /**
+     * Editing a {@code profiles:} entry alone must never be able to widen what is permitted — only
+     * editing {@code models.allow:} itself can. This is the invariant the ticket states explicitly;
+     * this test pins it by giving a profile a plausible-looking model that was never added to the
+     * allow-list and confirming it is still refused.
+     */
+    @Test
+    void addingAProfileCannotWidenTheAllowListByItself(@TempDir Path dir) throws Exception {
+        Path f = dir.resolve("fleetd.yaml");
+        Files.writeString(f, """
+                bind:
+                  port: 8080
+                profiles:
+                  sonnet:
+                    baseUrl: http://gx10.gw:8000
+                    model: claude-sonnet-5
+                  brand-new:
+                    baseUrl: http://gx12.gw:8000
+                    model: claude-sonnet-6-preview
+                models:
+                  allow:
+                    - model: claude-sonnet-5
+                """);
+        FleetConfig cfg = FleetConfig.load(f);
+
+        IllegalStateException e = assertThrows(IllegalStateException.class, cfg::validateModels);
+        assertTrue(e.getMessage().contains("brand-new"));
+        assertTrue(e.getMessage().contains("claude-sonnet-6-preview"));
+    }
+
+    /** {@code models} is a brand-new top-level key and must be recognized, not WARN-ed as unknown. */
+    @Test
+    void modelsIsAKnownTopLevelKey() {
+        assertTrue(FleetConfig.KNOWN_TOP_LEVEL_KEYS.contains("models"));
+    }
 }

fleetd/src/test/java/dev/ltms/fleet/config/FleetConfigValidateAllTest.java

@@ -0,0 +1,358 @@
+package dev.ltms.fleet.config;
+
+import org.junit.jupiter.api.Test;
+import org.junit.jupiter.api.io.TempDir;
+
+import java.lang.reflect.Method;
+import java.nio.file.Files;
+import java.nio.file.Path;
+import java.util.ArrayList;
+import java.util.List;
+import java.util.Set;
+import java.util.TreeSet;
+
+import static org.junit.jupiter.api.Assertions.assertDoesNotThrow;
+import static org.junit.jupiter.api.Assertions.assertEquals;
+import static org.junit.jupiter.api.Assertions.assertThrows;
+import static org.junit.jupiter.api.Assertions.assertTrue;
+
+/**
+ * The gap this class exists to close: mutation testing on the fleetd ticket "central allow-list
+ * of usable models" found that although {@link FleetConfig#validateModels()}'s own logic was well
+ * pinned, nothing proved either real caller ({@code Fleetd.main} and {@link ConfigRef#reload()})
+ * still invoked it — deleting the call site left the full suite green (1478/0/0/0). A follow-up
+ * measurement (same technique — remove one call site, run the suite, not read the code) found the
+ * SAME gap for all five of {@link FleetConfig}'s other validators at startup, and for four of the
+ * six inside {@link ConfigRef#reload()}. This is a class of gap, not one line's mistake: every one
+ * of those thirteen tests called the validator itself directly, never the real caller that was
+ * supposed to.
+ *
+ * <p>The fix replaces the six individual {@code cfg.validateXxx()} calls at each of the two real
+ * call sites with one {@link FleetConfig#validateAll()}, which reaches every validator by
+ * reflection rather than by a hand-maintained list of names. A hand-maintained list of six names
+ * would have exactly the defect it replaces: the seventh validator someone adds next month has no
+ * reason to be added to it, and nothing would say so. This class proves TWO separate claims, and
+ * keeps them separate on purpose:
+ *
+ * <ol>
+ *   <li>{@link #theSweepMechanismIsGenericNotHardcodedToFleetConfigsSixNames()} and its neighbours
+ *       prove the reflective sweep itself ({@link FleetConfig#invokeAllValidators}) is a general
+ *       mechanism — it runs whatever public, no-arg, void {@code validateXxx()} methods a class
+ *       happens to declare today, including a class with more of them than {@link FleetConfig}
+ *       has right now. This is the proof that a future, real seventh validator on {@link
+ *       FleetConfig} would be swept automatically, without needing to add a real (unwanted)
+ *       seventh validator just to exercise the claim.</li>
+ *   <li>{@link #validateAllReachesEveryOneOfTodaysSixValidators()} proves {@link
+ *       FleetConfig#validateAll()} itself is wired to that same generic mechanism and genuinely
+ *       reaches each of today's six real validators — reusing the exact minimal failing
+ *       configurations {@code FleetConfigTest} already established for each one directly, so a
+ *       single call to {@code validateAll()} is shown to reproduce every one of those six
+ *       failures.</li>
+ * </ol>
+ *
+ * <p>Together with the direct-{@code Fleetd.main}-invocation tests in {@code
+ * FleetdStartupValidationTest} (which prove the real startup call site still calls {@code
+ * validateAll()}) and the {@code ConfigRefTest} reload tests (which prove the same for {@link
+ * ConfigRef#reload()}), removing {@code cfg.validateAll();} from either real call site now fails
+ * a test in this module.
+ *
+ * <p><b>What is NOT pinned, measured rather than assumed.</b> Reverting {@link
+ * FleetConfig#validateAll()} to a hardcoded list of today's six method calls leaves the whole
+ * suite green (measured at review: 1491 tests, 0 failures). Nothing ties {@code validateAll()} to
+ * the generic sweep — claim 1 proves {@link FleetConfig#invokeAllValidators} is generic, and claim
+ * 2 proves {@code validateAll()} reaches today's six, and a hardcoded list satisfies both. So the
+ * reflective sweep is a convenience, not the guarantee. The guarantee is {@link
+ * #fleetConfigDeclaresExactlyTheseSixValidatorsToday()}: it fails the moment a seventh validator
+ * is declared, which forces whoever adds it to look at this file.
+ */
+class FleetConfigValidateAllTest {
+
+    // ── Claim 1: the reflective sweep is a general mechanism, not six names in disguise ──────────
+
+    /**
+     * A throwaway fixture class, unrelated to {@link FleetConfig} in every way except shape: three
+     * public, no-arg, void methods named {@code validateXxx}. Proves the sweep works on ANY class
+     * with this shape, not on something special-cased to {@link FleetConfig}.
+     */
+    static class ThreeValidators {
+        final List<String> ran = new ArrayList<>();
+
+        public void validateAlpha() {
+            ran.add("validateAlpha");
+        }
+
+        public void validateBeta() {
+            ran.add("validateBeta");
+        }
+
+        public void validateGamma() {
+            ran.add("validateGamma");
+        }
+    }
+
+    @Test
+    void theSweepMechanismIsGenericNotHardcodedToFleetConfigsSixNames() {
+        ThreeValidators target = new ThreeValidators();
+        FleetConfig.invokeAllValidators(target);
+        assertEquals(List.of("validateAlpha", "validateBeta", "validateGamma"), target.ran,
+                "every validateXxx() method on this unrelated class must run, in alphabetical "
+                        + "order — the sweep reads the class's own shape, not a name FleetConfig "
+                        + "happens to know about");
+    }
+
+    /**
+     * The core of the "self-maintaining" requirement: the exact same class shape as {@link
+     * ThreeValidators}, plus one more method — standing in for "a developer adds a validator next
+     * month". Nothing about the sweep changes to pick it up; the new method is invoked purely
+     * because it exists and matches the shape. This is what makes adding a seventh real validator
+     * to {@link FleetConfig} safe without touching {@link FleetConfig#validateAll()} or either
+     * call site — there is no "wire it in" step left to forget.
+     */
+    static class FourValidators {
+        final List<String> ran = new ArrayList<>();
+
+        public void validateAlpha() {
+            ran.add("validateAlpha");
+        }
+
+        public void validateBeta() {
+            ran.add("validateBeta");
+        }
+
+        public void validateGamma() {
+            ran.add("validateGamma");
+        }
+
+        public void validateDelta() {
+            ran.add("validateDelta");
+        }
+    }
+
+    @Test
+    void addingAFourthValidatorMethodGetsSweptWithNoOtherChange() {
+        FourValidators target = new FourValidators();
+        FleetConfig.invokeAllValidators(target);
+        assertEquals(List.of("validateAlpha", "validateBeta", "validateDelta", "validateGamma"),
+                sorted(target.ran),
+                "the fourth method must be reached automatically — proving a class can grow the "
+                        + "set of things it validates with no change to the sweep itself");
+    }
+
+    private static List<String> sorted(List<String> in) {
+        List<String> copy = new ArrayList<>(in);
+        copy.sort(String::compareTo);
+        return copy;
+    }
+
+    @Test
+    void aFailingValidatorStopsTheSweepAndPropagatesUnchanged() {
+        class OneFails {
+            @SuppressWarnings("unused")
+            public void validateOk() {
+                // passes
+            }
+
+            public void validateBoom() {
+                throw new IllegalStateException("refusing to start: boom");
+            }
+        }
+        IllegalStateException e = assertThrows(IllegalStateException.class,
+                () -> FleetConfig.invokeAllValidators(new OneFails()));
+        assertEquals("refusing to start: boom", e.getMessage(),
+                "the real exception must propagate unchanged, not be wrapped or swallowed");
+    }
+
+    /**
+     * Every rule the sweep's filter applies, proven independently: only public, no-arg, void
+     * methods whose name starts with {@code "validate"} run, {@code validateAll} itself is
+     * excluded (so a class that declares one of its own — as {@link FleetConfig} does — cannot
+     * recurse into itself), and a same-shaped-but-wrongly-named or wrongly-shaped method never
+     * runs. A reader who "simplifies" the filter in {@link FleetConfig#invokeAllValidators} in a
+     * way that widens or narrows it breaks one of these.
+     */
+    static class FilterEdgeCases {
+        final List<String> ran = new ArrayList<>();
+
+        public void validateReal() {
+            ran.add("validateReal");
+        }
+
+        /** Wrong name — must not run. */
+        public void checkSomething() {
+            ran.add("checkSomething");
+        }
+
+        /** Wrong shape — takes an argument. */
+        public void validateWithArg(String ignored) {
+            ran.add("validateWithArg");
+        }
+
+        /** Wrong shape — returns something. */
+        public boolean validateReturnsBoolean() {
+            ran.add("validateReturnsBoolean");
+            return true;
+        }
+
+        /** Excluded by name on purpose, so the sweep cannot call itself. */
+        public void validateAll() {
+            ran.add("validateAll");
+        }
+    }
+
+    @Test
+    void onlyPublicNoArgVoidValidateNamedMethodsRun() {
+        FilterEdgeCases target = new FilterEdgeCases();
+        FleetConfig.invokeAllValidators(target);
+        assertEquals(List.of("validateReal"), target.ran,
+                "checkSomething (wrong name), validateWithArg (wrong shape), "
+                        + "validateReturnsBoolean (wrong shape), and validateAll (excluded by "
+                        + "name) must all be skipped");
+    }
+
+    // ── Claim 2: FleetConfig.validateAll() is wired to that mechanism and reaches all six today ──
+
+    /**
+     * Reflectively enumerates {@link FleetConfig}'s own public, no-arg, void {@code validateXxx()}
+     * methods (excluding {@code validateAll} itself) — the exact same filter {@link
+     * FleetConfig#invokeAllValidators} applies. This is not the mechanism proof (that is claim 1,
+     * above, on an unrelated class) — it is a visible denominator: today there are six, named
+     * here, so a reader adding a seventh sees this assertion name the new count rather than a
+     * silent pass at the old one.
+     */
+    @Test
+    void fleetConfigDeclaresExactlyTheseSixValidatorsToday() {
+        Set<String> names = new TreeSet<>();
+        for (Method m : FleetConfig.class.getMethods()) {
+            if (java.lang.reflect.Modifier.isPublic(m.getModifiers())
+                    && m.getParameterCount() == 0
+                    && m.getReturnType() == void.class
+                    && m.getName().startsWith("validate")
+                    && !m.getName().equals("validateAll")) {
+                names.add(m.getName());
+            }
+        }
+        assertEquals(new TreeSet<>(Set.of("validateAuthExposure", "validateLeadTabPrefixes",
+                "validateSubscriptionProfiles", "validateCharters", "validateMembers",
+                "validateModels")), names,
+                "FleetConfig's public validate*() methods changed. Do TWO things, in this "
+                        + "order. First confirm validateAll() still delegates to "
+                        + "invokeAllValidators(this) — a hardcoded list there passes every other "
+                        + "test in this class, so this assertion is the only place that will ever "
+                        + "make you check. Only then update the expected set to match.");
+    }
+
+    /** A minimal, otherwise-valid file — same shape FleetConfigTest and ConfigRefTest use. */
+    private static String minimalValidYaml() {
+        return """
+                bind:
+                  host: 127.0.0.1
+                  port: 8765
+                profiles:
+                  sonnet:
+                    baseUrl: http://gx00.gw:8000
+                    model: sonnet
+                """;
+    }
+
+    @Test
+    void aFullyValidConfigPassesValidateAll(@TempDir Path dir) throws Exception {
+        Path f = dir.resolve("fleetd.yaml");
+        Files.writeString(f, minimalValidYaml());
+        assertDoesNotThrow(() -> FleetConfig.load(f).validateAll());
+    }
+
+    /**
+     * The heart of claim 2: for each of today's six real validators, a minimal file that fails
+     * ONLY that one — the exact fixtures {@code FleetConfigTest} uses to test each validator
+     * directly — must also fail through {@link FleetConfig#validateAll()}. If a future edit to
+     * {@code validateAll()} silently dropped one validator from the sweep (e.g. a typo'd name
+     * filter), exactly one of these six would start passing when it must not.
+     */
+    @Test
+    void validateAllReachesEveryOneOfTodaysSixValidators(@TempDir Path dir) throws Exception {
+        // validateAuthExposure: a non-loopback bind without token mode.
+        assertValidateAllRefuses(dir, "auth-exposure.yaml", """
+                bind:
+                  host: 0.0.0.0
+                  port: 8765
+                """, "auth.mode: token");
+
+        // validateLeadTabPrefixes: a fleet-wide tabLabel that starts with a lead's own tabPrefix.
+        assertValidateAllRefuses(dir, "lead-tab-prefixes.yaml", """
+                bind:
+                  host: 127.0.0.1
+                  port: 8765
+                fleet:
+                  tabLabel: "lead: {role} {profile}"
+                  leaders:
+                    opus:
+                      tab: "lead: opus"
+                """, "fleet.tabLabel");
+
+        // validateSubscriptionProfiles: subscription: true with env: reseating ANTHROPIC_BASE_URL.
+        assertValidateAllRefuses(dir, "subscription-profiles.yaml", """
+                bind:
+                  host: 127.0.0.1
+                  port: 8765
+                profiles:
+                  sonnet:
+                    subscription: true
+                    argv: ["ccs", "sonnet"]
+                    env:
+                      ANTHROPIC_BASE_URL: http://anything-not-on-the-allowlist
+                """, "ANTHROPIC_BASE_URL");
+
+        // validateCharters: a charter key that is not a role wire name.
+        assertValidateAllRefuses(dir, "charters.yaml", """
+                bind:
+                  host: 127.0.0.1
+                  port: 8765
+                fleet:
+                  charters:
+                    architetc: text
+                """, "architetc");
+
+        // validateMembers: an architect slot naming an unconfigured profile.
+        assertValidateAllRefuses(dir, "members.yaml", """
+                bind:
+                  host: 127.0.0.1
+                  port: 8765
+                profiles:
+                  gx10:
+                    baseUrl: http://gx10.gw:8000
+                fleet:
+                  architects:
+                    lead-designer:
+                      profile: sonnet
+                """, "lead-designer");
+
+        // validateModels: a profile naming a model outside the configured allow-list.
+        assertValidateAllRefuses(dir, "models.yaml", """
+                bind:
+                  host: 127.0.0.1
+                  port: 8765
+                profiles:
+                  sonnet:
+                    baseUrl: http://gx10.gw:8000
+                    model: claude-sonnet-5
+                  rogue:
+                    baseUrl: http://gx11.gw:8000
+                    model: claude-opus-9000
+                models:
+                  allow:
+                    - model: claude-sonnet-5
+                """, "rogue");
+    }
+
+    private static void assertValidateAllRefuses(Path dir, String fileName, String yaml,
+                                                  String mustContain) throws Exception {
+        Path f = dir.resolve(fileName);
+        Files.writeString(f, yaml);
+        FleetConfig cfg = FleetConfig.load(f);
+        IllegalStateException e = assertThrows(IllegalStateException.class, cfg::validateAll,
+                fileName + ": validateAll() must refuse this config");
+        assertTrue(e.getMessage().contains(mustContain),
+                fileName + ": expected message to contain \"" + mustContain + "\" but was: "
+                        + e.getMessage());
+    }
+}

fleetd/src/test/java/dev/ltms/fleet/config/FleetConfigWithDefaultsPreservesEveryComponentTest.java

@@ -97,6 +97,8 @@ class FleetConfigWithDefaultsPreservesEveryComponentTest {
         v.put("memberLoginShell", "/bin/zsh");
         v.put("memberSkills", "/skills/guard");
         v.put("idleSleepGuard", new FleetConfig.IdleSleepGuard(true));
+        v.put("models", new FleetConfig.Models(
+                List.of(new FleetConfig.Models.ModelEntry("model-guard"))));
         assertNamesMatchComponents(v);
         return v;
     }

fleetd/src/test/java/dev/ltms/fleet/mcp/FleetMcpTest.java

@@ -3,6 +3,7 @@ package dev.ltms.fleet.mcp;
 import dev.ltms.fleet.auth.CallerResolver;
 import dev.ltms.fleet.auth.MemberRegistry;
 import dev.ltms.fleet.auth.Principal;
+import dev.ltms.fleet.auth.Role;
 import dev.ltms.fleet.config.FleetConfig;
 import dev.ltms.fleet.guard.SubscriptionGuard;
 import dev.ltms.fleet.herdr.AgentControl;
@@ -28,6 +29,7 @@ import dev.ltms.fleet.placement.BackendQuarantine;
 import dev.ltms.fleet.placement.PlacementPolicies;
 import io.modelcontextprotocol.spec.McpSchema;
 import dev.ltms.fleet.msg.InMemoryReplyInbox;
+import dev.ltms.fleet.msg.ReplyInbox;
 import org.junit.jupiter.api.BeforeEach;
 import org.junit.jupiter.api.Test;
 
@@ -77,7 +79,7 @@ class FleetMcpTest {
             Thread.sleep(5);
         }
         assertTrue(rendezvous.isWaiting(target), "send should be accepted for " + target);
-        FleetMcp.reply(messages, target, "received");
+        FleetMcp.reply(messages, target, Role.WORKER, "received");
         assertEquals("received", textOf(send.get(6, TimeUnit.SECONDS)));
     }
 
@@ -110,7 +112,7 @@ class FleetMcpTest {
 
         // fleetd #365: a resolved live send must read distinctly from a merely-queued reply —
         // see replyWithNoPendingSendIsQueuedNotError below for the other case.
-        McpSchema.CallToolResult reply = FleetMcp.reply(messages, "term_a", "LGTM");
+        McpSchema.CallToolResult reply = FleetMcp.reply(messages, "term_a", Role.WORKER, "LGTM");
         assertEquals(MessageService.ReplyOutcome.RESOLVED_SEND.description(), textOf(reply));
 
         McpSchema.CallToolResult res = send.get(6, TimeUnit.SECONDS);
@@ -136,7 +138,7 @@ class FleetMcpTest {
         }
         assertTrue(rendezvous.isWaiting("term_a"), "send should have opened its waiter");
 
-        McpSchema.CallToolResult reply = FleetMcp.reply(messages, "term_a", "async LGTM");
+        McpSchema.CallToolResult reply = FleetMcp.reply(messages, "term_a", Role.WORKER, "async LGTM");
         assertEquals(MessageService.ReplyOutcome.RESOLVED_SEND.description(), textOf(reply));
 
         // Poll until the async send completes and reports the reply.
@@ -183,7 +185,7 @@ class FleetMcpTest {
             Thread.sleep(5);
         }
         assertTrue(rendezvous.isWaiting("term_a"));
-        FleetMcp.reply(messages, "term_a", "done");
+        FleetMcp.reply(messages, "term_a", Role.WORKER, "done");
         assertEquals("done", textOf(answer.get(6, TimeUnit.SECONDS)));
 
         McpSchema.CallToolResult done = FleetMcp.poll(messages, ticket, null);
@@ -215,7 +217,7 @@ class FleetMcpTest {
         // fleet_poll{ticket} stuck PENDING forever and later force-failed with a false "session
         // released before it replied" reason. This used to land in the inbox instead (see the old
         // assertion this replaced: messages.drainReplies("term_a").getFirst()...) — that was the bug.
-        FleetMcp.reply(messages, "term_a", "finished after timeout");
+        FleetMcp.reply(messages, "term_a", Role.WORKER, "finished after timeout");
         assertEquals("finished after timeout", textOf(FleetMcp.poll(messages, ticket, null)));
         assertTrue(messages.drainReplies("term_a").isEmpty(),
                 "the reply completed its own ticket directly and never touched the inbox");
@@ -269,7 +271,7 @@ class FleetMcpTest {
         }
         assertEquals(MessageService.Phase.FAILED, second.phase());
 
-        FleetMcp.reply(messages, "term_a", "late reply");
+        FleetMcp.reply(messages, "term_a", Role.WORKER, "late reply");
         assertEquals("late reply", messages.drainReplies("term_a").getFirst().content());
 
         CompletableFuture<McpSchema.CallToolResult> answer = CompletableFuture.supplyAsync(
@@ -278,7 +280,7 @@ class FleetMcpTest {
         while (!rendezvous.isWaiting("term_a") && System.currentTimeMillis() < deadline) {
             Thread.sleep(5);
         }
-        FleetMcp.reply(messages, "term_a", "done");
+        FleetMcp.reply(messages, "term_a", Role.WORKER, "done");
         assertEquals("done", textOf(answer.get(6, TimeUnit.SECONDS)));
     }
 
@@ -331,7 +333,7 @@ class FleetMcpTest {
     void replyWithNoPendingSendIsQueuedNotError() {
         // CB-307: a reply with no open send is now queued in the inbox, not an error.
         // fleetd #365: it must also no longer claim "delivered" — nothing was waiting for it.
-        McpSchema.CallToolResult res = FleetMcp.reply(messages, "term_a", "orphan");
+        McpSchema.CallToolResult res = FleetMcp.reply(messages, "term_a", Role.WORKER, "orphan");
         assertNotEquals(Boolean.TRUE, res.isError(), "a queued reply is not an error");
         assertEquals(MessageService.ReplyOutcome.QUEUED.description(), textOf(res));
 
@@ -341,6 +343,40 @@ class FleetMcpTest {
         assertEquals("orphan", drained.getFirst().content());
     }
 
+    @Test
+    void replyFromLeadIsRefusedBeforeItCanPublishToTheWorkerInbox() {
+        ReplyInbox inboxThatRejectsPublishes = new ReplyInbox() {
+            @Override public void own(String target) { }
+            @Override public void release(String target) { }
+            @Override public void publish(String target, String msgId, String content) {
+                fail("a lead fleet_reply must not publish to the worker inbox");
+            }
+            @Override public List<InboxMessage> peek(String target) { return List.of(); }
+            @Override public void ack(String target, String msgId) { }
+        };
+        MessageService leadMessages = new MessageService(agents, new Injector(agents), new Rendezvous(),
+                inboxThatRejectsPublishes);
+
+        McpSchema.CallToolResult res = assertDoesNotThrow(
+                () -> FleetMcp.reply(leadMessages, "term_lead", Role.PRIMARY, "peer reply"));
+
+        assertTrue(res.isError());
+        assertEquals("fleet_reply has no route to a peer lead. Use fleet_send{coordId: ...} for a peer on another "
+                        + "daemon or fleet_send{sessionId: ...} for a peer on this host. fleet_reply resolves a member's "
+                        + "blocked fleet_send, and a peer's coord-id message is durable and non-blocking, so there is "
+                        + "nothing for it to resolve.",
+                textOf(res));
+    }
+
+    @Test
+    void replyFromUnidentifiedCallerKeepsItsOwnError() {
+        McpSchema.CallToolResult res = FleetMcp.reply(messages, null, Role.PRIMARY, "reply");
+
+        assertTrue(res.isError());
+        assertEquals("fleet_reply is for workers only — could not identify the calling worker from the connection",
+                textOf(res));
+    }
+
     @Test
     void replyWithBlankContentIsACleanToolErrorNotAnUncaughtException() {
         // fleetd #302: MessageService.reply now REJECTS blank content by throwing. fleet_reply's
@@ -351,7 +387,7 @@ class FleetMcpTest {
         // has always used isBlank for exactly this reason.
         for (String blank : new String[] {null, "", "   ", "\n\t"}) {
             McpSchema.CallToolResult res = assertDoesNotThrow(
-                    () -> FleetMcp.reply(messages, "term_a", blank),
+                    () -> FleetMcp.reply(messages, "term_a", Role.WORKER, blank),
                     "blank content must be refused as a tool error, never thrown out of the handler");
             assertEquals(Boolean.TRUE, res.isError(), "blank content is an error result");
             assertTrue(textOf(res).contains("content is required"),
@@ -364,7 +400,7 @@ class FleetMcpTest {
     @Test
     void bridgePollWithTargetDrainsReplies() {
         // A reply with no open send queues it in the inbox.
-        FleetMcp.reply(messages, "term_a", "queued-msg");
+        FleetMcp.reply(messages, "term_a", Role.WORKER, "queued-msg");
 
         // fleet_poll with target drains the inbox.
         McpSchema.CallToolResult res = FleetMcp.poll(messages, null, "term_a");
@@ -415,7 +451,7 @@ class FleetMcpTest {
             Thread.sleep(5);
         }
         assertTrue(rendezvous.isWaiting("term_a"), "the answer should have reopened a waiter");
-        McpSchema.CallToolResult reply = FleetMcp.reply(messages, "term_a", "done");
+        McpSchema.CallToolResult reply = FleetMcp.reply(messages, "term_a", Role.WORKER, "done");
         assertEquals(MessageService.ReplyOutcome.RESOLVED_SEND.description(), textOf(reply));
         assertEquals("done", textOf(answer.get(6, TimeUnit.SECONDS)));
     }
@@ -1254,13 +1290,13 @@ class FleetMcpTest {
     @Test
     void bridgeAckRemovesSpecificReply() {
         // Queue a reply and capture its msgId.
-        FleetMcp.reply(messages, "term_a", "orphan");
+        FleetMcp.reply(messages, "term_a", Role.WORKER, "orphan");
         var before = messages.drainReplies("term_a");
         assertEquals(1, before.size(), "one reply in the inbox");
         String msgId = before.getFirst().msgId();
 
         // Publish the same reply again and ack it via fleet_ack surface.
-        FleetMcp.reply(messages, "term_a", "orphan-again");
+        FleetMcp.reply(messages, "term_a", Role.WORKER, "orphan-again");
         var peeked = messages.drainReplies("term_a");
         assertEquals(1, peeked.size(), "one fresh reply in the inbox");
 

fleetd/src/test/java/dev/ltms/fleet/mcp/FleetProfilesArmedFieldTest.java

@@ -0,0 +1,62 @@
+package dev.ltms.fleet.mcp;
+
+import dev.ltms.fleet.config.FleetConfig;
+import dev.ltms.fleet.guard.SubscriptionGuard;
+import dev.ltms.fleet.herdr.AgentControl;
+import dev.ltms.fleet.herdr.FakeHerdr;
+import dev.ltms.fleet.herdr.WorkspaceControl;
+import dev.ltms.fleet.member.ClaudeCodeLauncher;
+import dev.ltms.fleet.peer.PeerLauncher;
+import io.modelcontextprotocol.spec.McpSchema;
+import org.junit.jupiter.api.Test;
+
+import java.util.LinkedHashMap;
+import java.util.Map;
+import java.util.Set;
+
+import static org.junit.jupiter.api.Assertions.assertNotEquals;
+import static org.junit.jupiter.api.Assertions.assertTrue;
+
+/**
+ * fleetd #395: {@code fleet_profiles} must let an operator tell "this profile's usage-limit
+ * detection is armed" from "nothing can ever quarantine this profile" — see {@link
+ * FleetMcp.QuarantineSource#exhaustedPatternArmed()} and {@link
+ * FleetMcp#profilesView(PeerLauncher, FleetMcp.QuarantineSource, FleetMcp.OutageSource)}.
+ */
+class FleetProfilesArmedFieldTest {
+
+    private static PeerLauncher twoProfileLauncher(FakeHerdr h) {
+        FleetConfig.Profile armed = new FleetConfig.Profile(
+                "armed-profile", "http://gx00.gw:8000", "coder", null, "FLEETD_WORKER_TOKEN", null,
+                "tab", "fleetd-workers", "worker: {profile} #{n}", null, null, null);
+        FleetConfig.Profile unarmed = new FleetConfig.Profile(
+                "unarmed-profile", "http://gx01.gw:8000", "coder", null, "FLEETD_WORKER_TOKEN", null,
+                "tab", "fleetd-workers", "worker: {profile} #{n}", null, null, null);
+        Map<String, FleetConfig.Profile> profiles = new LinkedHashMap<>();
+        profiles.put(armed.profile(), armed);
+        profiles.put(unarmed.profile(), unarmed);
+        return new ClaudeCodeLauncher(new AgentControl(h), new WorkspaceControl(h),
+                new SubscriptionGuard(Set.of("gx00.gw", "gx01.gw")), profiles, armed.profile(), _ -> "tok");
+    }
+
+    private static String textOf(McpSchema.CallToolResult r) {
+        return ((McpSchema.TextContent) r.content().getFirst()).text();
+    }
+
+    @Test
+    void armedProfileReportsArmedAndUnarmedReportsUnarmed() {
+        FakeHerdr h = new FakeHerdr();
+        PeerLauncher workers = twoProfileLauncher(h);
+        FleetMcp.QuarantineSource source = new FleetMcp.QuarantineSource(
+                _ -> null, dev.ltms.fleet.placement.BackendQuarantine.none(),
+                profile -> "armed-profile".equals(profile));
+
+        McpSchema.CallToolResult res = FleetMcp.profiles(workers, source);
+        assertNotEquals(Boolean.TRUE, res.isError());
+        String out = textOf(res);
+
+        assertTrue(out.contains("\"exhaustionDetectionArmed\""), out);
+        assertTrue(out.contains("\"armed-profile\":true"), out);
+        assertTrue(out.contains("\"unarmed-profile\":false"), out);
+    }
+}

fleetd/src/test/java/dev/ltms/fleet/member/EnvAllowListScrubTest.java

@@ -120,40 +120,202 @@ class EnvAllowListScrubTest {
     }
 
     /**
-     * A pane inherits {@code UID}; a cleared test parent does not. The scrub must survive it.
+     * fleetd #394: the actual defect. Plain {@code export "$n="} is FATAL for a zsh read-only or
+     * special parameter (e.g. {@code UID}) and aborts the whole sourced file — every name still to
+     * come is never blanked, and the {@code scrub-report.txt} below is never written at all,
+     * silently ({@code 2>/dev/null} swallows the error). This plants an unblankable, exported,
+     * read-only variable in the MIDDLE of the names the scrub attempts to blank, with two more
+     * names after it, and asserts that both of those later names are STILL blanked and the report
+     * is STILL written with the failure counted — a test that only checked names BEFORE the failure
+     * point would pass today and prove nothing.
      *
-     * <p>Every other test here starts zsh from a CLEARED environment, so {@code UID} is never an
-     * exported name and never reaches the blanking loop. In a real member pane it is exported and
-     * it IS reached — and {@code export UID=} is a fatal zsh parameter error that aborts the whole
-     * sourced file, leaving every later name unscrubbed and writing no report at all. The abort is
-     * silent: the loop is wrapped in {@code 2>/dev/null}.
+     * <p>The planted name is a made-up one ({@code FLEETD_TEST_UNBLANKABLE}), not {@code UID} or
+     * any other name a skip-list might already know about — invariant 1 is that the loop survives
+     * ANY unblankable name, not a known one, so the test must not lean on one either.
      *
-     * <p>The assertion is deliberately "a report exists" rather than "the canary is blanked". The
-     * report is written by the last statement in the file, so its presence proves the script ran
-     * to completion; the canary alone would depend on where it happens to sit in {@code env} order.
-     * Both are checked, but only the first one fails deterministically without the fix.
+     * <p>Exercises the real artefact: {@link EnvAllowListScrub#scrubScript} is run verbatim under a
+     * real {@code /bin/zsh}, not just asserted on as a Java string. The four planted names are
+     * exported one at a time via {@code typeset -x}/{@code typeset -rx} immediately before the
+     * script runs, in a fixed order — zsh's {@code export}/{@code typeset -x} appends to the
+     * process's environment table in call order (verified empirically: a freshly-exported name
+     * always sorts after every inherited one and after every earlier freshly-exported name in
+     * {@code command env}'s own output), which is what makes the "middle" position deterministic
+     * here, unlike relying on the OS's own inherited-environment order.
      */
     @Test
-    void scrubSurvivesAnInheritedUidTheWayARealPaneHasIt(@TempDir Path tmp) throws Exception {
+    void unblankableNameInTheMiddleDoesNotAbortNamesAfterIt(@TempDir Path tmp) throws Exception {
         assumeTrue(Files.isExecutable(ZSH), "/bin/zsh not present — nothing to prove here");
-        Set<String> allowed = MemberEnvAllowList.derive(List.of());
-        Path zdotdir = EnvAllowListScrub.generate(tmp, allowed);
 
-        // The production shape: UID present and exported, as every pane shell inherits it.
-        Map<String, String> paneLikeParent = Map.of(
-                "HOME", System.getProperty("user.home"),
-                "PATH", "/usr/bin:/bin",
-                "SHELL", "/bin/zsh",
-                "UID", "1000",
-                "CB633_CANARY", "must-not-survive-the-scrub");
-        Set<String> survivors = exportedNamesFromCleanParent(paneLikeParent, zdotdir);
+        // Only ZDOTDIR is allowed — it must survive the scrub itself, since the report is written
+        // to "$ZDOTDIR/..." AFTER the blanking loop runs; if ZDOTDIR were blanked as a side effect,
+        // the report write would silently go to the wrong place instead of testing anything.
+        String script = EnvAllowListScrub.scrubScript(Set.of("ZDOTDIR"));
+        String setup = """
+                typeset -x FLEETD_TEST_BEFORE=1
+                typeset -rx FLEETD_TEST_UNBLANKABLE=1
+                typeset -x FLEETD_TEST_AFTER_A=1
+                typeset -x FLEETD_TEST_AFTER_B=1
+                """;
 
-        EnvAllowListScrub.ScrubReport report = EnvAllowListScrub.readReport(zdotdir);
-        assertNotNull(report,
-                "an inherited UID must not abort the scrub — no report means the file died mid-loop "
-                        + "and every name after UID in `env` order was left unscrubbed");
-        assertFalse(survivors.contains("CB633_CANARY"),
-                "a non-allow-listed name must still be blanked when UID is in the environment");
+        ProcessBuilder pb = new ProcessBuilder("/bin/zsh");
+        pb.environment().clear();
+        pb.environment().put("PATH", "/usr/bin:/bin");
+        pb.environment().put("ZDOTDIR", tmp.toAbsolutePath().toString());
+        pb.redirectError(ProcessBuilder.Redirect.DISCARD);
+        Process zsh = pb.start();
+        zsh.getOutputStream().write((setup + script).getBytes(StandardCharsets.UTF_8));
+        zsh.getOutputStream().flush();
+        zsh.getOutputStream().close();
+        assertTrue(zsh.waitFor(60, java.util.concurrent.TimeUnit.SECONDS),
+                "the scrub script did not exit within 60s");
+        assertEquals(0, zsh.exitValue(),
+                "the scrub script itself must never abort — an unblankable name must not kill the "
+                        + "sourced file");
+
+        EnvAllowListScrub.ScrubReport report = EnvAllowListScrub.readReport(tmp);
+        assertNotNull(report, "the report must still be written even though one name could not be "
+                + "blanked — a report that silently never appears is the #394 bug");
+        assertTrue(report.blanked().contains("FLEETD_TEST_BEFORE"),
+                "sanity: the name before the unblankable one must be blanked");
+        assertTrue(report.blanked().contains("FLEETD_TEST_AFTER_A"),
+                "the FIRST name AFTER the unblankable one must still be blanked — before the fix, "
+                        + "the whole loop aborted at the unblankable name and every later name was "
+                        + "silently left untouched");
+        assertTrue(report.blanked().contains("FLEETD_TEST_AFTER_B"),
+                "the SECOND name after the unblankable one must also still be blanked");
+        assertTrue(report.unblankable().contains("FLEETD_TEST_UNBLANKABLE"),
+                "the unblankable name is reported by name, not silently dropped");
+        // fleetd #400 note: zsh itself auto-exports SHLVL on every shell start (measured: it appears
+        // in `command env` even from a fully cleared parent), and a bare assignment to it is coerced
+        // rather than failing — exactly the shape #400 fixes. Before that fix, eval's exit status
+        // alone silently misclassified SHLVL as blanked, so this test's old "exactly one" assertion
+        // passed by accident: it never actually proved SHLVL was absent from the candidates, only
+        // that the old bug hid it. Now that classification reads the value back, SHLVL and
+        // FLEETD_TEST_UNBLANKABLE both correctly land in unblankable() — real, unplanted evidence
+        // the #400 fix works, not just the synthetic case in the dedicated #400 test above.
+        assertTrue(report.unblankable().contains("SHLVL"),
+                "fleetd #400: zsh's own auto-exported SHLVL must also be reported unblankable, not "
+                        + "silently miscounted as blanked");
+        assertEquals(report.unblankable().size(), report.failed(),
+                "the failed count must equal the number of names actually reported unblankable");
+    }
+
+    /**
+     * fleetd #400: {@code eval}'s exit status is not proof that a name was actually blanked. zsh
+     * coerces a bare {@code NAME=} assignment on an integer special parameter to a number instead of
+     * failing, so {@code eval} reports success while the value stays non-empty — a status-based
+     * classification calls that "blanked" when it was not. This drives all three shapes a name can
+     * take through the real {@code scrubScript} in ONE run: a normal, genuinely blankable name; a
+     * fatal one ({@code LINENO} — deliberately not {@code UID}, so this test does not depend on the
+     * harness's uid); and the silent-no-op one the ticket is about ({@code SECONDS}, rc 0 but
+     * unchanged). Under the pre-#400 exit-status check, {@code SECONDS} would land in
+     * {@code blanked()} — that is the exact false receipt this fix removes.
+     *
+     * <p>Criterion 3: a cleared {@code ProcessBuilder} parent does not, by itself, give the child
+     * zsh any of these names — {@code SECONDS}/{@code LINENO} are zsh's own built-in parameters and
+     * only become CANDIDATES the enumeration loop can see (i.e. show up in {@code command env}) when
+     * they arrive via the process's own environment table, not merely by existing as zsh parameters
+     * inside the shell. So each is put into {@code pb.environment()} explicitly, after
+     * {@code clear()} — confirmed empirically first (a throwaway probe piping
+     * {@code env -i PATH=... SECONDS=999 LINENO=999 FLEETD_TEST_NORMAL=1 zsh -c 'command env | cut
+     * -d= -f1'}) that all three names really appear in {@code command env}'s output under exactly
+     * this construction, not relying on whatever the test-runner's own ambient environment happens
+     * to contain.
+     */
+    @Test
+    void classifiesByObservedValueNotExitStatusAcrossAllThreeShapes(@TempDir Path tmp) throws Exception {
+        assumeTrue(Files.isExecutable(ZSH), "/bin/zsh not present — nothing to prove here");
+
+        String script = EnvAllowListScrub.scrubScript(Set.of("ZDOTDIR"));
+
+        ProcessBuilder pb = new ProcessBuilder("/bin/zsh");
+        pb.environment().clear();
+        pb.environment().put("PATH", "/usr/bin:/bin");
+        pb.environment().put("ZDOTDIR", tmp.toAbsolutePath().toString());
+        // Explicitly placed in the child's environment table — see the javadoc above on why a
+        // cleared parent alone does not put these on the enumeration loop's candidate list.
+        pb.environment().put("SECONDS", "999");   // rc 0, value coerced/unchanged — the #400 bug
+        pb.environment().put("LINENO", "999");    // fatal on assignment, eval rc != 0, contained
+        pb.environment().put("FLEETD_TEST_NORMAL", "1"); // genuinely blankable, the control case
+        pb.redirectError(ProcessBuilder.Redirect.DISCARD);
+        Process zsh = pb.start();
+        zsh.getOutputStream().write(script.getBytes(StandardCharsets.UTF_8));
+        zsh.getOutputStream().flush();
+        zsh.getOutputStream().close();
+        assertTrue(zsh.waitFor(60, java.util.concurrent.TimeUnit.SECONDS),
+                "the scrub script did not exit within 60s");
+        assertEquals(0, zsh.exitValue(),
+                "the scrub script must still reach its end with both a fatal name and a silent "
+                        + "no-op name among the candidates");
+
+        EnvAllowListScrub.ScrubReport report = EnvAllowListScrub.readReport(tmp);
+        assertNotNull(report, "the report must still be written");
+        assertTrue(report.blanked().contains("FLEETD_TEST_NORMAL"),
+                "the control case: an ordinary name is genuinely blankable and must be reported so");
+        assertTrue(report.unblankable().contains("LINENO"),
+                "a name fatal to assign to must be reported unblankable — sanity check that "
+                        + "containment still works under the new classification");
+        assertTrue(report.unblankable().contains("SECONDS"),
+                "the #400 defect: eval returns rc 0 for SECONDS (zsh coerces the assignment instead "
+                        + "of failing) but the value is left non-empty — classifying on the observed "
+                        + "value catches this; classifying on eval's exit status would have called "
+                        + "this \"blanked\" and produced a false receipt");
+        assertFalse(report.blanked().contains("SECONDS"),
+                "SECONDS must never appear as blanked — it was never actually emptied");
+    }
+
+    /**
+     * fleetd #394 follow-up: the blanking loop's {@code eval "export ${n}="} splices {@code n} into
+     * a string that zsh then interprets as shell syntax. That is only safe because every name
+     * reaching {@code _cb633_blank} already passed an identifier check in the ENUMERATION loop
+     * (20 lines away, in a different loop) — so the fix re-asserts the identical check immediately
+     * before the {@code eval} call, rather than trusting that distant guard to keep holding.
+     *
+     * <p>This test plants a value with an embedded newline, exploiting the exact "junk from
+     * multi-line values" gap the enumeration loop's own comment already documents: {@code command
+     * env}'s text output is read line-by-line, so a value's second line becomes a spurious extra
+     * "name" that was never a real exported variable. The fragment used here ({@code
+     * junk.fragment}) is merely non-conforming (it contains a dot) — never command-shaped; this
+     * test must never demonstrate command execution and plants no command-shaped payload.
+     *
+     * <p>Exercises the real artefact end-to-end: {@link EnvAllowListScrub#scrubScript} runs
+     * verbatim under a real {@code /bin/zsh}, exactly as {@code generate()} would produce it — this
+     * is not a synthetic call into just the blanking loop.
+     */
+    @Test
+    void nonIdentifierJunkFromAMultilineValueIsSkippedNotBlankedOrUnblankable(@TempDir Path tmp)
+            throws Exception {
+        assumeTrue(Files.isExecutable(ZSH), "/bin/zsh not present — nothing to prove here");
+
+        String script = EnvAllowListScrub.scrubScript(Set.of("ZDOTDIR"));
+
+        ProcessBuilder pb = new ProcessBuilder("/bin/zsh");
+        pb.environment().clear();
+        pb.environment().put("PATH", "/usr/bin:/bin");
+        pb.environment().put("ZDOTDIR", tmp.toAbsolutePath().toString());
+        // Embedded newline: `command env`'s own text output splits this into two lines, and the
+        // second ("junk.fragment") has no "=" at all, so `cut -d= -f1` returns it unchanged as a
+        // spurious candidate "name" — it was never an actual exported variable by that name.
+        pb.environment().put("FLEETD_TEST_MULTILINE", "keep\njunk.fragment");
+        pb.redirectError(ProcessBuilder.Redirect.DISCARD);
+        Process zsh = pb.start();
+        zsh.getOutputStream().write(script.getBytes(StandardCharsets.UTF_8));
+        zsh.getOutputStream().flush();
+        zsh.getOutputStream().close();
+        assertTrue(zsh.waitFor(60, java.util.concurrent.TimeUnit.SECONDS),
+                "the scrub script did not exit within 60s");
+        assertEquals(0, zsh.exitValue(), "the scrub script must reach its end");
+
+        EnvAllowListScrub.ScrubReport report = EnvAllowListScrub.readReport(tmp);
+        assertNotNull(report, "the report must still be written");
+        assertTrue(report.blanked().contains("FLEETD_TEST_MULTILINE"),
+                "sanity: the real, identifier-shaped variable must still be blanked normally");
+        assertFalse(report.blanked().contains("junk.fragment"),
+                "a non-identifier fragment is not a real variable and must never be blanked");
+        assertFalse(report.unblankable().contains("junk.fragment"),
+                "a non-identifier fragment must never even become a candidate the blanking loop "
+                        + "attempts — it must be filtered before either guard has to catch it, so "
+                        + "it is neither blanked nor counted as a failed attempt");
     }
 
     /** A group-shared ZDOTDIR still lets the member truncate and write its pre-created receipt. */

fleetd/src/test/java/dev/ltms/fleet/msg/MessageServiceTest.java

@@ -1917,6 +1917,12 @@ class MessageServiceTest {
             // Only now does it reply. Under the old clock this reply was born already expired.
             assertTrue(rendezvous.resolve(T, "the long report"));
             awaitTicketPhaseOn(wiring.service(), slow, MessageService.Phase.DONE);
+            // #399: same barrier fix as the sibling eviction test, for consistency — this test's
+            // own assertion happens to survive a late stamp today (the clock is not advanced any
+            // further between here and the sweep below, so cutoff cannot move past whichever
+            // value completedNanos ends up stamped with), but DONE is still the wrong thing to
+            // order on before a sweep that matters for the TTL.
+            awaitCompletionStamped(wiring.service(), slow);
 
             // A second delegation runs pruneTerminalTickets before it returns.
             wiring.service().sendAsync(T, "an unrelated second task");
@@ -1946,6 +1952,11 @@ class MessageServiceTest {
             injectDelivery();
             assertTrue(rendezvous.resolve(T, "quick result"));
             awaitTicketPhaseOn(wiring.service(), done, MessageService.Phase.DONE);
+            // #399: DONE can be observed before the completion hook stamps completedNanos. Wait
+            // for the real stamp before advancing the clock, or the hook can run late and stamp
+            // the ADVANCED time — making cutoff = advanced - TTL unreachable and hiding the very
+            // eviction this test exists to pin.
+            awaitCompletionStamped(wiring.service(), done);
 
             // Nobody collected it, and the TTL has now passed since it FINISHED.
             clock.addAndGet(MessageService.TICKET_TTL_NANOS + TimeUnit.SECONDS.toNanos(1));
@@ -1956,6 +1967,80 @@ class MessageServiceTest {
         }
     }
 
+    /**
+     * fleetd #409: pins the #399 ordering invariant deterministically, on the first run, without
+     * relying on host load.
+     *
+     * <p>fleetd #399 was itself only reproducible probabilistically: the real race window between
+     * {@code CompletableFuture.complete()} making {@link MessageService.Phase#DONE} observable and
+     * the constructor's {@code whenComplete} hook actually stamping {@code completedNanos} (see
+     * {@link MessageService#isCompletionStampedForTest}) is normally a handful of instructions wide,
+     * and needed heavy background load on the host to show up in a run at all. This test does not
+     * try to hit that narrow window by chance — it widens it on purpose: {@link #STAMP_DELAY_MILLIS}
+     * is injected into the clock itself, so the completion hook's one read of {@code nowNanos} for
+     * this ticket sleeps before returning, and everything the test does in the meantime (advance the
+     * clock, run a sweep, assert) happens for certain inside that window, on any host.
+     *
+     * <p>Removing the {@link #awaitCompletionStamped} call below reproduces the pre-#399 ordering:
+     * the test then advances the clock and runs its sweep while the hook is still asleep, so the
+     * hook wakes up and stamps {@code completedNanos} with the clock's ALREADY-ADVANCED value
+     * instead of the real completion time. {@code cutoff = advanced - TICKET_TTL_NANOS} can then
+     * never exceed that stamp (the gap between them is fixed at exactly {@code TICKET_TTL_NANOS}),
+     * so the sweep that already ran never evicts the ticket and the very next assertion — expecting
+     * eviction — fails immediately. That is a deterministic, first-run RED failure, not a flaky one
+     * and not a false pass: I ran the test with the barrier call removed and confirmed
+     * {@code assertNull} fails because {@code poll} still returns the ticket's DONE view, which is
+     * exactly this masked-eviction mechanism and not some unrelated defect in the test's own wiring.
+     */
+    @Test
+    void aTicketOrderedOnDoneInsteadOfTheCompletionStampSurvivesAnEvictionItMustNotSurvive() throws Exception {
+        java.util.concurrent.atomic.AtomicLong clock = new java.util.concurrent.atomic.AtomicLong(1_000_000_000L);
+        // Armed for exactly one call: MessageService's only three nowNanos() call sites are the Task
+        // constructor's createdNanos, this constructor's whenComplete hook's completedNanos, and
+        // pruneTerminalTickets' cutoff — none of which run between arming this (right before
+        // triggering the reply below) and the completion hook firing, so the delayed call is
+        // unambiguously that hook's stamp for `ticket`, never a createdNanos or cutoff read.
+        java.util.concurrent.atomic.AtomicBoolean delayArmed = new java.util.concurrent.atomic.AtomicBoolean(false);
+        java.util.function.LongSupplier gatedClock = () -> {
+            if (delayArmed.compareAndSet(true, false)) {
+                try {
+                    Thread.sleep(STAMP_DELAY_MILLIS);
+                } catch (InterruptedException e) {
+                    Thread.currentThread().interrupt();
+                }
+            }
+            return clock.get();
+        };
+        MessageService service = new MessageService(agents, injector, rendezvous, inbox, null, null, gatedClock);
+        try {
+            String ticket = service.sendAsync(T, "a quick task");
+            awaitWaiting();
+            injectDelivery();
+
+            delayArmed.set(true);
+            assertTrue(rendezvous.resolve(T, "quick result"));
+
+            awaitTicketPhaseOn(service, ticket, MessageService.Phase.DONE);
+            // The barrier under test (fleetd #409, same fix as fleetd #399): remove this one call to
+            // reproduce the pre-#399 ordering — see the class-level note above for what happens then.
+            awaitCompletionStamped(service, ticket);
+
+            // A real clock would need the whole TTL to pass; the injected one does it instantly, and
+            // by now completedNanos already holds the REAL (small, unadvanced) completion time.
+            clock.addAndGet(MessageService.TICKET_TTL_NANOS + TimeUnit.SECONDS.toNanos(1));
+            service.sendAsync(T, "an unrelated second task"); // runs pruneTerminalTickets before returning
+
+            assertNull(service.poll(ticket),
+                    "a ticket whose real completion time is long past the advanced cutoff must be "
+                            + "evicted, whatever the completion hook's clock read was delayed by");
+        } finally {
+            service.close();
+        }
+    }
+
+    /** Bounded delay the injected clock sleeps for in {@link #aTicketOrderedOnDoneInsteadOfTheCompletionStampSurvivesAnEvictionItMustNotSurvive}. */
+    private static final long STAMP_DELAY_MILLIS = 300;
+
     private MessageService.TaskView awaitTicketPhaseOn(MessageService svc, String ticket,
             MessageService.Phase phase) throws Exception {
         long deadline = System.currentTimeMillis() + 3000;
@@ -1990,6 +2075,25 @@ class MessageServiceTest {
         return view;
     }
 
+    /**
+     * fleetd #399: waits until {@code ticket}'s completion hook has actually stamped
+     * {@code completedNanos}, not just until {@link MessageService#poll} reports
+     * {@link MessageService.Phase#DONE} for it. {@code poll} can observe {@code DONE} the instant
+     * the task's future resolves, before the {@code whenComplete} hook that stamps the completion
+     * time has run — {@code CompletableFuture.complete()} publishes its result and only then runs
+     * dependents. A test that is about to advance an injected clock past the TTL must order itself
+     * after the stamp, not after {@code DONE}: winning the race the other way stamps the
+     * *advanced* clock value and can hide a real eviction bug behind a false pass.
+     */
+    private void awaitCompletionStamped(MessageService svc, String ticket) throws Exception {
+        long deadline = System.currentTimeMillis() + 3000;
+        while (!svc.isCompletionStampedForTest(ticket)) {
+            assertTrue(System.currentTimeMillis() < deadline,
+                    "completedNanos for " + ticket + " was never stamped");
+            Thread.sleep(5);
+        }
+    }
+
     // --- CB-640: fleet health evidence accessors --------------------------------------------
 
     @Test