Adds .claude/skills/handover/SKILL.md — the outgoing lead's procedure for writing
the file a fresh lead session inherits.
Reviewed by the lead against the eight requirements in the brief: every number
carries its command, measured-vs-reported is marked, open decisions name their
owner, live hazards, what is not owed, a first section of three re-measurement
commands, a time-and-commit stamp, and a plain statement that the file goes
stale. All eight are present, plus a leave-out section and a template.
Verified by the lead, not taken from the worker's report:
- CLAUDE.md diff is the addendum's skill list only, in the primary-side group.
- The canonical block is byte-identical with the wiki template (sync check True).
- CI run 1718 green on 325d0771, the same commit reviewed.
Follow-up owed by the lead: the skill describes #480's automation in the present
tense, but the tool does not exist yet. The lead will soften that wording so the
skill does not promise a fleet_handover tool a session cannot call.
This commit was merged in pull request #481.
This commit is contained in:
@@ -0,0 +1,163 @@
|
||||
---
|
||||
name: handover
|
||||
description: Procedure for an outgoing lead to write the handover file before a fresh lead session replaces it (fleetd #480). Load this when your context is full and fleetd is about to clear your pane. The file is the new lead's only inheritance — follow it exactly.
|
||||
---
|
||||
|
||||
# Handover — write the file the next lead depends on
|
||||
|
||||
fleetd ticket #480 lets a lead session hand off to a fresh one. The outgoing lead writes a
|
||||
handover file, fleetd checks it, clears the pane, and tells the new session to read that file
|
||||
and carry on.
|
||||
|
||||
**The new lead's only inheritance is that file.** It does not see your conversation, your plan,
|
||||
or your screen. If the file is thin or wrong, the new lead re-derives what you already knew, and
|
||||
that wastes hours. Writing a good handover file is real work. It is not paperwork you rush
|
||||
through at the end of a session.
|
||||
|
||||
This skill is the procedure for writing it. Every rule below earned its place because a past
|
||||
handover got it wrong.
|
||||
|
||||
## 1. Confirm you are the right session to write this
|
||||
|
||||
Run `fleet_whoami` first. It must answer `primary`. Only a primary (lead) session writes a
|
||||
handover file. A worker's job ends with its own pull request, not a fleet-wide handoff.
|
||||
|
||||
## 2. Every number needs a command, run in this turn
|
||||
|
||||
A number is a claim: a count, a commit hash, a process id, a percentage, a queue depth. Before
|
||||
you write one, run the command that produces it — now, in this turn, against the live state.
|
||||
|
||||
Never take a number from:
|
||||
|
||||
- earlier in your own conversation — the state has moved since then,
|
||||
- a peer lead's report — that is their measurement, not yours,
|
||||
- your own memory of an earlier session.
|
||||
|
||||
Put the command, or its real output, next to the number. That lets the next lead re-run it and
|
||||
check it still matches. If you cannot measure something yourself, say so instead of guessing:
|
||||
"the fleet01 lead reports 91 commits behind; I have not checked this myself."
|
||||
|
||||
## 3. Say what you measured and what you did not
|
||||
|
||||
Mark every claim as one of two things:
|
||||
|
||||
- **"I checked this myself, in the code or on this host, at `<time>`."**
|
||||
- **"I did not check this myself; `<who>` reported it."**
|
||||
|
||||
Never present someone else's measurement as your own. This matters most for cross-host claims —
|
||||
a peer lead's daemon, a worker's report, or something the operator said earlier that you cannot
|
||||
re-verify from here.
|
||||
|
||||
## 4. Record open decisions, and who owns them
|
||||
|
||||
List three things:
|
||||
|
||||
- what the operator actually asked for, in their own words where you have them,
|
||||
- what is still unanswered,
|
||||
- any question you decided yourself instead of asking, with your reason.
|
||||
|
||||
Write the decision so it cannot be mistaken for the operator's instruction. Say plainly: "the
|
||||
operator never answered X; I decided Y, because Z." Without this, the next lead either silently
|
||||
reopens a closed question or assumes the operator chose something they never did.
|
||||
|
||||
## 5. Record live hazards
|
||||
|
||||
List anything that will break if the next lead does the obvious thing next. This includes:
|
||||
|
||||
- unpushed commits or unmerged branches,
|
||||
- a build, a spawn, or a redeploy still running,
|
||||
- code merged to `main` but not yet redeployed to the live daemon,
|
||||
- any trap that looks safe and is not — say what goes wrong and why, not only that something is
|
||||
"tricky."
|
||||
|
||||
## 6. Record what is explicitly not owed
|
||||
|
||||
List work that is finished, and work that another party has said they do not want touched. Name
|
||||
who said so and when. Without this line, the next lead re-does closed work or reopens a question
|
||||
a peer already declined to revisit.
|
||||
|
||||
## 7. Open the file with three re-measurement commands
|
||||
|
||||
The file's own first section must give the next lead three concrete commands to run before
|
||||
acting on anything else in the file:
|
||||
|
||||
1. confirm role — for example `fleet_whoami`,
|
||||
2. confirm the state of the working tree — for example `git status` and
|
||||
`git rev-list origin/main..HEAD`,
|
||||
3. read the live fleet — for example `fleet_list`.
|
||||
|
||||
Record what each command answered when you wrote the file, and tell the reader to run it again
|
||||
rather than trust your answer. The point of this section is that the reader checks live state
|
||||
before acting on any claim in the rest of the file, including yours.
|
||||
|
||||
## 8. Stamp the file with time and commit
|
||||
|
||||
Near the top of the file, write:
|
||||
|
||||
- the date and time you wrote it,
|
||||
- the commit the tree was on (`git rev-parse HEAD`),
|
||||
- whether the tree was clean (`git status`).
|
||||
|
||||
Without this, nobody can tell how old the file is, or which code it describes.
|
||||
|
||||
## 9. State plainly that the file goes stale fast
|
||||
|
||||
Say near the top: **re-measure anything you act on.** The file goes stale the moment anyone
|
||||
merges a branch, spawns a member, or restarts the daemon. Everything in the file is a snapshot
|
||||
of one moment, not a live fact.
|
||||
|
||||
## 10. What to leave out
|
||||
|
||||
Do not include:
|
||||
|
||||
- narration of how the session felt, or how hard something was,
|
||||
- anything the repo already records — code structure, git history, or a rule already written in
|
||||
`CLAUDE.md`. Point at it instead of repeating it,
|
||||
- advice that is only true for the session that is ending — a half-open terminal, a local
|
||||
variable, a train of thought with no state behind it.
|
||||
|
||||
A handover file is a record of state and decisions. It is not a diary.
|
||||
|
||||
## Writing style
|
||||
|
||||
Write in plain English. Use everyday words, one idea per sentence, and active voice. Keep every
|
||||
class, method, file, flag, and config key exactly as it appears in the code — replacing a
|
||||
precise term with a vague one makes the sentence wrong, not simpler. Explain an abbreviation the
|
||||
first time you use it.
|
||||
|
||||
If a diagram genuinely helps, put it in the `.md` file as a fenced ` ```mermaid ` block with no
|
||||
hardcoded colors, so it stays readable on light and dark backgrounds. Quote any label that has
|
||||
brackets, colons, or slashes.
|
||||
|
||||
## Template
|
||||
|
||||
```markdown
|
||||
# Handover — <fleet name> lead session, <date and time>
|
||||
|
||||
Written at commit `<output of git rev-parse HEAD>`. Tree was <clean, or dirty: `<git status
|
||||
summary>`>. Re-measure anything you act on — this file goes stale the moment anyone merges,
|
||||
spawns, or restarts.
|
||||
|
||||
## 0. Do these three things first
|
||||
|
||||
1. Confirm your role: `fleet_whoami` — must answer `primary`. (Answered `<result>` at `<time>`.)
|
||||
2. Confirm tree state: `git status`, `git rev-list origin/main..HEAD`. (`<result>` at `<time>`.)
|
||||
3. Read the live fleet: `fleet_list`. (`<result>` at `<time>`.)
|
||||
|
||||
## 1. What the operator asked for
|
||||
|
||||
<the live instructions, in their words where you have them; what is still open; any decision
|
||||
you made yourself, and why>
|
||||
|
||||
## 2. Open decisions, and who owns them
|
||||
|
||||
<one line per decision: who owns it, what is unanswered>
|
||||
|
||||
## 3. Live hazards
|
||||
|
||||
<one entry per hazard: what breaks, and why, if the next lead does the obvious thing>
|
||||
|
||||
## 4. What is not owed
|
||||
|
||||
<finished work, and work another party has declined; name who said so and when>
|
||||
```
|
||||
@@ -258,8 +258,10 @@ must obey belongs in the charter, not here.
|
||||
with no `fleet_reply`, and the scrape returned the tail of the brief instead.
|
||||
- **Primary-side skills** (not delegation playbooks — a worker cannot use them):
|
||||
`port-to-opencode` (make an OpenCode session a participant in this workspace),
|
||||
`fleets-status` (report every fleet that shares one LavinMQ instance) and
|
||||
`redeploy-fleetd` (rebuild and restart the live daemon after a merge).
|
||||
`fleets-status` (report every fleet that shares one LavinMQ instance),
|
||||
`redeploy-fleetd` (rebuild and restart the live daemon after a merge) and
|
||||
`handover` (write the file a fresh lead session inherits when the outgoing one hands off,
|
||||
fleetd #480).
|
||||
- **This repo is also a Claude Code marketplace, and ships a plugin.** `.claude-plugin/marketplace.json`
|
||||
points at `plugin/`, which carries the MCP mount and the `setup` skill
|
||||
(`/claude-bridge:setup` — make any project bridge-ready). It was added in CB-527 and then went
|
||||
|
||||
Reference in New Issue
Block a user