fleetd/scripts/redeploy-bridged.sh

#!/usr/bin/env bash
#
# Rebuild and restart the bridged daemon.
#
# A merge is not a deployment: the running daemon holds the jar it was started with, so code merged
# to main does nothing until this runs. See CLAUDE.md -> "Redeploying the daemon".
#
# This script exists to turn six remembered traps into one auditable command:
#
#   1. A piped `mvn` hides BUILD FAILURE behind a zero exit, so the build here is never piped.
#   2. The daemon must start from a LOGIN shell, or the tokens it hands to members are empty:
#      WORKER_GITEA_TOKEN (workers cannot open a PR) and AI_GATEWAY_TOKEN (401 at llm.ltms.dev).
#      Both are read from the DAEMON's own environment at spawn time, so a value added to
#      secrets.sh after startup is absent. Nothing logs this here, so the script checks and says
#      so — and since CB-594, bridged's own startup log says so too, by env var name.
#   3. An old daemon that never actually died looks identical from the outside, so the script waits
#      for the process to exit and for the port to free before it starts a new one.
#   4. "It started" is not "it works": the script polls /healthz until it answers, and reports the
#      herdr protocol number, because healthz can be green while every spawn fails on a protocol
#      mismatch.
#   5. Restarting under live members drops their tickets, so the script refuses unless you confirm
#      the fleet is drained.
#   6. CB-594 — the launchd agent (deploy/dev.ltms.bridged.plist), if installed and loaded, is a
#      SECOND supervisor: its KeepAlive.SuccessfulExit=false restarts the daemon on any nonzero
#      exit, and a bare SIGTERM makes this JVM exit 143 even with its shutdown hook running to
#      completion (measured — see the CB-594 report). A plain `kill` here would race launchd's own
#      restart of the OLD jar. So this script detects whether the agent is loaded and, only then,
#      swaps `kill` + manual `nohup` for `launchctl unload`/`load` — the one supervisor in control
#      at any moment is whichever one you asked to act, never both.
#
# Usage:
#   scripts/redeploy-bridged.sh              # build, confirm, restart, verify
#   scripts/redeploy-bridged.sh --yes        # skip the drain confirmation (fleet already checked)
#   scripts/redeploy-bridged.sh --no-build   # restart the jar already on disk
#   scripts/redeploy-bridged.sh --check      # report state and exit; changes nothing
#
# Exits non-zero on any failure. A failed build never stops the running daemon.

set -euo pipefail

REPO="$(cd "$(dirname "${BASH_SOURCE[0]}")/.." && pwd)"
BRIDGED="$REPO/bridged"
JAR="$BRIDGED/target/bridged.jar"
OUT="$BRIDGED/bridged.out"
# Matches BOTH the absolute form and the relative `java -jar target/bridged.jar` a hand-start
# produces from inside bridged/. Anchoring on the absolute path alone was a real bug: the daemon
# restarted correctly and the script still reported "no process appeared", because it launched with
# a relative path and then looked for an absolute one.
PATTERN='target/bridged.jar'
HEALTH='http://127.0.0.1:8765/healthz'
STOP_WAIT=30      # seconds to wait for a clean exit before reporting failure
HEALTH_WAIT=60    # seconds to wait for /healthz to answer after start

# CB-594: the launchd agent this script must not fight with (see trap 6 above).
LAUNCHD_LABEL='dev.ltms.bridged'
LAUNCHD_PLIST="$HOME/Library/LaunchAgents/$LAUNCHD_LABEL.plist"

DO_BUILD=1; ASSUME_YES=0; CHECK_ONLY=0
for arg in "$@"; do
  case "$arg" in
    --yes|-y)   ASSUME_YES=1 ;;
    --no-build) DO_BUILD=0 ;;
    --check)    CHECK_ONLY=1 ;;
    -h|--help)  sed -n '3,37p' "${BASH_SOURCE[0]}"; exit 0 ;;
    *) echo "unknown option: $arg (try --help)" >&2; exit 2 ;;
  esac
done

say()  { printf '\n\033[1m== %s\033[0m\n' "$*"; }
ok()   { printf '   ok    %s\n' "$*"; }
warn() { printf '   WARN  %s\n' "$*"; }
die()  { printf '\n   FAIL  %s\n\n' "$*" >&2; exit 1; }

jar_id() { [ -f "$JAR" ] && shasum -a 256 "$JAR" | cut -c1-12 || echo "absent"; }
running_pid() { pgrep -f "$PATTERN" || true; }
# `launchctl list <label>` exits 0 iff the label is loaded (registered with launchd) — true whether
# or not it is currently running, which is exactly "supervision is active" for our purposes. Read-
# only: neither helper below changes anything, so both are also safe under --check.
launchd_installed() { [ -f "$LAUNCHD_PLIST" ]; }
launchd_loaded() { launchctl list "$LAUNCHD_LABEL" >/dev/null 2>&1; }

# CB-600: the script computes its own log path from where it sits on disk (REPO, above); the
# plist hard-codes an absolute StandardOutPath. Nothing forced the two to agree — if this script
# were ever run from a checkout other than the one the loaded plist names, launchd would start and
# log the daemon correctly, while every check below (the fresh "bridged listening" line, the
# ERROR-count scan) would read a different, empty or stale file and the script would report a
# clean restart while the daemon crash-loops. Pure and side-effect-free besides `die`/`ok` — reads
# the two paths, resolves them, compares — so it never touches launchd or the daemon and can be
# exercised by sourcing this script (see the SOURCED guard below) without installing the agent.
check_log_path_matches_plist() {
  local script_out="$1" plist_path="$2"
  local plist_out resolved_out resolved_plist_out
  # Checked by exit status, not by emptiness: on a missing file/key PlistBuddy exits nonzero but
  # still writes a message ("File Doesn't Exist, Will Create: ...") that command substitution
  # would happily capture as if it were the real value — testing only `-z` missed that case.
  if ! plist_out="$(/usr/libexec/PlistBuddy -c 'Print :StandardOutPath' "$plist_path" 2>/dev/null)" \
      || [ -z "$plist_out" ]; then
    die "launchd agent is loaded but PlistBuddy could not read StandardOutPath from
        $plist_path
      — cannot verify the daemon logs where this script is about to look. Fix the plist before
      redeploying supervised."
  fi
  resolved_out="$(cd "$(dirname "$script_out")" 2>/dev/null && pwd -P)/$(basename "$script_out")" || true
  resolved_plist_out="$(cd "$(dirname "$plist_out")" 2>/dev/null && pwd -P)/$(basename "$plist_out")" || true
  if [ -z "$resolved_out" ] || [ -z "$resolved_plist_out" ] || [ "$resolved_out" != "$resolved_plist_out" ]; then
    die "log path mismatch — this script reads
        $script_out  (resolved: ${resolved_out:-<directory does not exist>})
      but the loaded plist's StandardOutPath is
        $plist_out  (resolved: ${resolved_plist_out:-<directory does not exist>})
      Under supervision the daemon writes to the PLIST's path, not necessarily this script's — every
      post-restart check below (the fresh 'bridged listening' line, the ERROR-count scan) would read
      the wrong file and could report a clean restart while the daemon crash-loops. Fix the mismatch
      (move this checkout to match the plist, or edit the plist's StandardOutPath/StandardErrorPath)
      before redeploying supervised."
  fi
  ok "log path check: script and plist agree ($resolved_out)"
}

# CB-600: sourceable for testing. When this file is SOURCED (not executed) it stops here — nothing
# below runs — so a test harness can `source` it to call check_log_path_matches_plist (or the
# other pure helpers above) against a throwaway plist fixture without ever reaching the mutating
# flow (build/stop/start) or touching the real daemon or launchd. On a normal `./redeploy-bridged.sh`
# invocation `(return 0 2>/dev/null)` fails (return is illegal at top level of an executed script),
# so this whole block is a no-op and every line below still runs exactly as before.
if (return 0 2>/dev/null); then
  return 0
fi

# ---------------------------------------------------------------- report state

say "current state"
OLD_PID="$(running_pid)"
if [ -n "$OLD_PID" ]; then
  ok "daemon running, pid $OLD_PID"
else
  warn "no daemon running — this will be a cold start"
fi
ok "jar on disk: $(jar_id)  ($([ -f "$JAR" ] && date -r "$JAR" '+%Y-%m-%d %H:%M:%S' || echo 'none'))"
ok "HEAD: $(git -C "$REPO" log --oneline -1)"

# CB-594: supervision state. Installed and loaded are different facts — a copied-but-never-loaded
# plist supervises nothing, and a loaded label with no file backing it (rare, but possible after an
# edited/moved plist) is still what launchd will act on.
if launchd_installed; then
  ok "launchd agent installed: $LAUNCHD_PLIST"
else
  warn "launchd agent NOT installed (no supervision — a crash will not restart the daemon)."
fi
SUPERVISED=0
if launchd_loaded; then
  SUPERVISED=1
  ok "launchd agent loaded ($LAUNCHD_LABEL) — launchd supervises this daemon"
  # CB-600: fail loudly here, before ANY other check runs, if this script and the loaded plist
  # would read different log files — every check after this point is worthless otherwise.
  check_log_path_matches_plist "$OUT" "$LAUNCHD_PLIST"
else
  warn "launchd agent not loaded — this script is the only thing that will restart the daemon."
fi

# The trap with no log line. Checked in a LOGIN shell, because that is how the daemon is started
# below. Never prints the value — only whether it resolved.
if zsh -lc '[ -n "${WORKER_GITEA_TOKEN:-}" ]' 2>/dev/null; then
  ok "WORKER_GITEA_TOKEN resolves in a login shell"
else
  warn "WORKER_GITEA_TOKEN is EMPTY in a login shell."
  warn "The daemon will start fine and workers will silently fail to open PRs."
  warn "Fix \${SHARED_ENV}/tools/secrets.sh before relying on worker checkpoints."
fi

# Same trap, second variable (CB-591). A profile's `tokenEnv:` is resolved from the DAEMON's own
# process environment by HerdrPeerLauncher.resolveEnv, so a token added to secrets.sh after the
# daemon started is simply absent. The launcher then injects an empty token and llm.ltms.dev answers
# 401 — long after the restart, and with nothing tying the two together.
if zsh -lc '[ -n "${AI_GATEWAY_TOKEN:-}" ]' 2>/dev/null; then
  ok "AI_GATEWAY_TOKEN resolves in a login shell"
else
  warn "AI_GATEWAY_TOKEN is EMPTY in a login shell."
  warn "Any profile whose tokenEnv is AI_GATEWAY_TOKEN will get an empty token and 401 at the gateway."
  warn "This only matters once a profile points at llm.ltms.dev — harmless before that."
fi

if [ "$CHECK_ONLY" = 1 ]; then
  say "--check: nothing changed"
  exit 0
fi

# ---------------------------------------------------------------------- build
# Deliberately before the stop: a failed build must never leave the fleet down.

if [ "$DO_BUILD" = 1 ]; then
  say "build"
  BUILD_LOG="$(mktemp -t bridged-build)"
  echo "   log: $BUILD_LOG"
  if ! mvn -f "$BRIDGED/pom.xml" clean install > "$BUILD_LOG" 2>&1; then
    grep -E 'ERROR|BUILD FAILURE|Tests run:.*Failures: [1-9]|Tests run:.*Errors: [1-9]' "$BUILD_LOG" \
      | head -20 || true
    die "build failed — the running daemon was NOT touched. Full log: $BUILD_LOG"
  fi
  grep -E '^\[INFO\] Tests run:.*Failures' "$BUILD_LOG" | tail -1 | sed 's/^\[INFO\] /   /' || true
  ok "BUILD SUCCESS"
  ok "jar now: $(jar_id)"
else
  say "build skipped (--no-build)"
fi

[ -f "$JAR" ] || die "no jar at $JAR — run without --no-build"

# ----------------------------------------------------------------- drain gate

if [ -n "$OLD_PID" ] && [ "$ASSUME_YES" = 0 ]; then
  say "drain check"
  echo "   A restart drops every in-flight ticket and rendezvous. A member's report"
  echo "   is NOT recoverable once its ticket is gone."
  echo
  echo "   Confirm with bridge_list that no members are live, and bridge_poll anything"
  echo "   you still want, BEFORE continuing."
  echo
  read -r -p "   Fleet drained? type yes to restart: " reply
  [ "$reply" = "yes" ] || die "aborted — nothing changed"
fi

# ------------------------------------------------------------------ stop
#
# CB-594: when SUPERVISED, launchd owns the stop — never a raw `kill` here. A bare SIGTERM makes
# this JVM exit 143 even with its shutdown hook running to completion (verified separately: a
# throwaway Java process with an equivalent shutdown hook, sent SIGTERM from a login shell that
# could `wait` on it directly, reported exit code 143 every time — never 0). launchd's
# KeepAlive.SuccessfulExit=false treats any nonzero exit as a crash and restarts the OLD jar,
# which would race this script's own restart of the NEW one. `launchctl unload` avoids that race
# by deregistering the job first, so no KeepAlive is left armed when the process actually stops.

if [ -n "$OLD_PID" ]; then
  say "stop"
  RESTART_MARK="$(wc -l < "$OUT" 2>/dev/null || echo 0)"   # verify a FRESH line appears later
  if [ "$SUPERVISED" = 1 ]; then
    echo "   supervision is ON: using 'launchctl unload' (not kill) so launchd's own KeepAlive"
    echo "   cannot restart the OLD jar out from under this script — see the CB-594 comment above."
    launchctl unload -w "$LAUNCHD_PLIST" \
      || die "launchctl unload failed — the daemon may still be under supervision; investigate before retrying"
  else
    kill "$OLD_PID"
  fi
  for _ in $(seq "$STOP_WAIT"); do
    [ -z "$(running_pid)" ] && break
    sleep 1
  done
  if [ -n "$(running_pid)" ]; then
    die "pid $OLD_PID still alive after ${STOP_WAIT}s. Not escalating to kill -9 automatically:
        the shutdown hook releases sessions and worktrees in order, and killing it hard can
        leave worktrees and panes behind. Investigate, then kill -9 by hand if you accept that."
  fi
  ok "pid $OLD_PID exited"
elif [ "$SUPERVISED" = 1 ]; then
  # Loaded but not currently running (e.g. throttled after a crash loop). Unload it anyway so the
  # start step below does a clean load, never a load stacked on an already-loaded label.
  say "stop"
  RESTART_MARK="$(wc -l < "$OUT" 2>/dev/null || echo 0)"
  launchctl unload -w "$LAUNCHD_PLIST" 2>/dev/null || true
  ok "launchd agent unloaded (was already not running)"
else
  RESTART_MARK="$(wc -l < "$OUT" 2>/dev/null || echo 0)"
fi

# ------------------------------------------------------------------ start
# Unsupervised: login shell (zsh -l) is what puts the secrets on the daemon's environment, and cwd
# must be bridged/ because the daemon resolves bridged.yaml, logs/ and target/ relative to it.
# Supervised: launchd does both — deploy/dev.ltms.bridged.plist points ProgramArguments at
# scripts/bridged-launchd-wrapper.sh (CB-594), which is what execs the login shell in launchd's
# place, and WorkingDirectory in the plist already pins bridged/.

say "start"
if [ "$SUPERVISED" = 1 ]; then
  echo "   supervision is ON: using 'launchctl load' so launchd starts and keeps supervising this"
  echo "   process, instead of a manual nohup that launchd would know nothing about."
  # CB-600: 'launchctl unload -w' above already persisted Disabled=true for this label. A load -w
  # that succeeds clears it; a load -w that FAILS leaves the agent both stopped and disabled — worse
  # than before this script ran, because a later reboot or login will not bring it back either. One
  # retry covers a transient race (e.g. launchd not yet fully done deregistering); if it still fails,
  # die with the exact recovery command rather than a bare "failed".
  if ! launchctl load -w "$LAUNCHD_PLIST" 2>/dev/null; then
    warn "launchctl load failed on the first attempt — retrying once after a short pause"
    sleep 2
    launchctl load -w "$LAUNCHD_PLIST" || die "launchctl load failed twice.
        The agent is now STOPPED and DISABLED — it will NOT come back on its own, not even after a
        reboot or login, because 'launchctl unload -w' above persisted Disabled=true and load -w
        never got the chance to clear it. Recover with:
            launchctl load -w \"$LAUNCHD_PLIST\"
        If that still fails, check 'launchctl list $LAUNCHD_LABEL', validate the plist with
        'plutil -lint \"$LAUNCHD_PLIST\"', and check $OUT before assuming a retry will succeed."
  fi
else
  # Absolute jar path so `ps` names which checkout is running.
  ( cd "$BRIDGED" && zsh -lc "nohup java -jar '$JAR' >> bridged.out 2>&1 &" )
fi

for _ in $(seq 10); do
  NEW_PID="$(running_pid)"
  [ -n "$NEW_PID" ] && break
  sleep 1
done
[ -n "${NEW_PID:-}" ] || die "no process appeared. Last lines of $OUT:
$(tail -20 "$OUT" 2>/dev/null)"
[ "$NEW_PID" != "${OLD_PID:-}" ] || die "pid unchanged ($NEW_PID) — the old daemon never died"
ok "started, pid $NEW_PID"

# ------------------------------------------------------------------ verify

say "verify"

HEALTH_BODY=""
for _ in $(seq "$HEALTH_WAIT"); do
  if HEALTH_BODY="$(curl -fsS --max-time 2 "$HEALTH" 2>/dev/null)"; then break; fi
  HEALTH_BODY=""
  sleep 1
done

if [ -z "$HEALTH_BODY" ]; then
  # 503 still means the daemon is up — it means herdr is unreachable. Say which.
  CODE="$(curl -s -o /dev/null -w '%{http_code}' --max-time 2 "$HEALTH" 2>/dev/null || echo 000)"
  if [ "$CODE" = "503" ]; then
    warn "/healthz answers 503 degraded — the daemon is up but herdr is unreachable."
    warn "Spawns will fail. Check herdr before delegating anything."
    curl -s --max-time 2 "$HEALTH" 2>/dev/null | head -3 || true
  else
    die "/healthz never answered within ${HEALTH_WAIT}s (last code: $CODE). Last lines of $OUT:
$(tail -30 "$OUT" 2>/dev/null)"
  fi
else
  ok "/healthz 200 — $HEALTH_BODY"
  warn "healthz green only proves herdr ANSWERS. If its protocol number changed, spawns can still"
  warn "fail — prove a real spawn before trusting the fleet."
fi

# A fresh listening line, strictly after the restart mark. An old daemon that never died would
# otherwise let an old line pass for a new one.
if tail -n "+$((RESTART_MARK + 1))" "$OUT" 2>/dev/null | grep -q 'bridged listening'; then
  ok "$(tail -n "+$((RESTART_MARK + 1))" "$OUT" | grep 'bridged listening' | tail -1)"
else
  warn "no fresh 'bridged listening' line after the restart — check $OUT yourself"
fi

# Config keys the daemon accepted or deferred at boot. This is usually WHY you restarted.
say "config at boot"
tail -n "+$((RESTART_MARK + 1))" "$OUT" 2>/dev/null \
  | grep -iE 'deferred|classification:|fleet health:|coverage' | tail -8 | sed 's/^/   /' \
  || echo "   (nothing reported)"

# Errors since the restart, anchored to the marker so old noise cannot leak in.
ERRS="$(tail -n "+$((RESTART_MARK + 1))" "$OUT" 2>/dev/null | grep -cE ' (ERROR|SEVERE) ' || true)"
say "result"
ok "pid $NEW_PID, jar $(jar_id)"
if [ "${ERRS:-0}" -gt 0 ]; then
  warn "$ERRS ERROR lines since restart:"
  tail -n "+$((RESTART_MARK + 1))" "$OUT" | grep -E ' (ERROR|SEVERE) ' | tail -5 | sed 's/^/   /'
else
  ok "no ERROR lines since restart"
fi
echo
echo "   Next: call bridge_whoami and confirm it still answers 'primary'. A lead whose tab label"
echo "   no longer matches fleet.leaders.*.tab is demoted to worker and refuses orchestration."
echo