fleetd/scripts/test-redeploy-fleetd.sh

#!/usr/bin/env bash
# Self-contained checks for the pure log classifier in redeploy-fleetd.sh.

set -euo pipefail

ROOT="$(cd "$(dirname "${BASH_SOURCE[0]}")/.." && pwd)"
TMP="$(mktemp -d "$ROOT/.redeploy-log-test.XXXXXX")"
trap 'rm -rf "$TMP"' EXIT

# Sourcing stops before redeploy-fleetd.sh can build, stop, or start the daemon.
source "$ROOT/scripts/redeploy-fleetd.sh"

fail() {
  printf 'FAIL: %s\n' "$*" >&2
  return 1
}

assert_equals() {
  local expected="$1" actual="$2" description="$3"
  [ "$expected" = "$actual" ] || fail "$description: expected $expected, got $actual"
}

classify_fixture() {
  local name="$1"
  classify_amqp_connection_errors "$TMP/$name"
}

# fleetd #492 follow-up: detect_supervisor's stdout is now "kind<SEP>detail" (see the constraints
# comment above detect_supervisor in redeploy-fleetd.sh) — every test below that only cares about
# the kind must split it out with the SAME in-shell parameter expansion the real call site (:438)
# uses, never a bare string comparison against the raw output.
supervisor_kind_of() {
  printf '%s' "${1%%"$SUPERVISOR_DETAIL_SEP"*}"
}
supervisor_detail_of() {
  printf '%s' "${1#*"$SUPERVISOR_DETAIL_SEP"}"
}


# fleetd #492 — supervisor detection. Detect_supervisor() reads launchd_loaded/systemd_loaded, so
# each test overrides BOTH pairs (installed + loaded) explicitly, rather than relying on either
# being naturally absent: this machine may itself be running a real fleetd under launchd right now
# (see CLAUDE.md/MEMORY.md — launchd supervision has been live here since 2026-08-26), so leaving
# launchd_loaded unmocked in a "systemd only" test would silently read this host's own live state
# instead of the fixture.
test_detect_supervisor_launchd_only() {
  launchd_installed() { return 0; }
  launchd_loaded()    { return 0; }
  systemd_installed() { return 1; }
  systemd_loaded()    { return 1; }
  assert_equals "launchd" "$(supervisor_kind_of "$(detect_supervisor)")" "launchd-only detection"
}

test_detect_supervisor_systemd_only() {
  launchd_installed() { return 1; }
  launchd_loaded()    { return 1; }
  systemd_installed() { return 0; }
  systemd_loaded()    { return 0; }
  assert_equals "systemd" "$(supervisor_kind_of "$(detect_supervisor)")" "systemd-only detection"
}

test_detect_supervisor_none() {
  launchd_installed() { return 1; }
  launchd_loaded()    { return 1; }
  systemd_installed() { return 1; }
  systemd_loaded()    { return 1; }
  assert_equals "none" "$(supervisor_kind_of "$(detect_supervisor)")" "unsupervised detection"
}

# fleetd #492 follow-up — detect_supervisor must never answer "none" when the truth is "could not
# tell". `systemd_installed`/`systemd_loaded` already know a unit file exists; this proves that
# fact is now actually consulted, not just printed as a warning: an installed-but-not-loaded unit
# reads as unclear, because is-active answers "no" for activating/deactivating/failed/pending
# auto-restart too, and every one of those is a host that IS under systemd.
test_detect_supervisor_systemd_installed_not_loaded_is_unclear() {
  launchd_installed() { return 1; }
  launchd_loaded()    { return 1; }
  systemd_installed() { return 0; }   # the unit file IS there
  systemd_loaded()    { return 1; }   # is-active says no — could be activating/failed/pending restart
  local raw
  raw="$(detect_supervisor)"
  assert_equals "unclear" "$(supervisor_kind_of "$raw")" "systemd installed-but-not-loaded must read as unclear, not none"
  printf '%s' "$(supervisor_detail_of "$raw")" | grep -qF "$SYSTEMD_UNIT" \
    || fail "detail does not name the systemd unit it found installed-but-not-loaded"
}

# Same fact, the launchd side: a plist on disk that is not currently loaded (unloaded without being
# removed, or about to be reloaded) must not read as "no supervisor" either.
test_detect_supervisor_launchd_installed_not_loaded_is_unclear() {
  launchd_installed() { return 0; }   # the plist IS there
  launchd_loaded()    { return 1; }   # launchctl list says not loaded
  systemd_installed() { return 1; }
  systemd_loaded()    { return 1; }
  local raw
  raw="$(detect_supervisor)"
  assert_equals "unclear" "$(supervisor_kind_of "$raw")" "launchd installed-but-not-loaded must read as unclear, not none"
  printf '%s' "$(supervisor_detail_of "$raw")" | grep -qF "$LAUNCHD_LABEL" \
    || fail "detail does not name the launchd label it found installed-but-not-loaded"
}

# Drives the REAL systemd_loaded/systemd_installed bodies (never stubbed) through a `systemctl`
# stub placed first on PATH that exits non-zero AND writes to stderr — the shape of a systemctl
# that runs but cannot reach the user bus (measured elsewhere as a headless ssh session with no
# lingering). This must read as unclear, never none: a probe that could not answer at all is not
# the same fact as "no supervisor is loaded".
test_detect_supervisor_systemd_probe_error_is_unclear() {
  # Re-source first to restore the REAL launchd_*/systemd_* probe bodies. Earlier tests in this
  # file permanently override them with stub `return 0`/`return 1` bodies (that is the whole point
  # of those tests), and a bash function definition is global for the rest of the process — without
  # this, systemd_loaded here would still be whatever the previous test left it as, never touching
  # a real `systemctl` call at all.
  source "$ROOT/scripts/redeploy-fleetd.sh"
  local bin_dir result rc=0
  bin_dir="$TMP/stub-bin-systemctl-errors"
  mkdir -p "$bin_dir"
  cat > "$bin_dir/systemctl" <<'STUB'
#!/usr/bin/env bash
echo "Failed to connect to bus: No such file or directory" >&2
exit 1
STUB
  chmod +x "$bin_dir/systemctl"

  PATH="$bin_dir:$PATH" systemd_loaded && rc=0 || rc=$?
  [ "$rc" -ne 0 ] || fail "systemd_loaded must not report loaded=true when systemctl only errored"
  assert_equals "1" "$SYSTEMD_LOADED_ERRORED" "systemd_loaded must flag a probe error, not a clean negative"

  launchd_installed() { return 1; }
  launchd_loaded()    { return 1; }
  result="$(PATH="$bin_dir:$PATH" detect_supervisor)"
  assert_equals "unclear" "$(supervisor_kind_of "$result")" "a systemd probe error must read as unclear, not none"
  printf '%s' "$(supervisor_detail_of "$result")" | grep -qF "$SYSTEMD_UNIT" \
    || fail "detail does not name the systemd unit whose probe errored"
}

# fleetd #492 follow-up (Item 1): this must go through the REAL call-site shape at :437-440, not a
# hand-constructed "unclear" value — a test that builds "unclear" directly proves the switch, not
# the handoff, and that is exactly the gap that let SUPERVISOR_UNCLEAR_DETAIL never reach the real
# caller in b17f37a. detect_supervisor runs as $(detect_supervisor): a subshell. Only stdout
# survives that boundary, so kind AND detail must both cross on it — this test proves they do.
test_require_drivable_supervisor_refuses_unclear() {
  launchd_installed() { return 1; }
  launchd_loaded()    { return 1; }
  systemd_installed() { return 0; }
  systemd_loaded()    { return 1; }

  local SUPERVISOR_RAW SUPERVISOR_KIND SUPERVISOR_UNCLEAR_DETAIL output rc=0
  # Exactly what :437-439 does — do not shortcut this by constructing "unclear" by hand.
  SUPERVISOR_RAW="$(detect_supervisor)"
  SUPERVISOR_KIND="${SUPERVISOR_RAW%%"$SUPERVISOR_DETAIL_SEP"*}"
  SUPERVISOR_UNCLEAR_DETAIL="${SUPERVISOR_RAW#*"$SUPERVISOR_DETAIL_SEP"}"

  assert_equals "unclear" "$SUPERVISOR_KIND" "setup: expected unclear before testing the refusal"
  [ -n "$SUPERVISOR_UNCLEAR_DETAIL" ] \
    || fail "detail did not survive the \$(...) call-site boundary — SUPERVISOR_UNCLEAR_DETAIL is empty in the parent shell"
  printf '%s' "$SUPERVISOR_UNCLEAR_DETAIL" | grep -qF "$SYSTEMD_UNIT" \
    || fail "detail that crossed the subshell boundary does not name the systemd unit it found installed-but-not-loaded"

  output="$(require_drivable_supervisor "$SUPERVISOR_KIND" 2>&1)" || rc=$?
  [ "$rc" -ne 0 ] || fail "require_drivable_supervisor accepted an unclear (undrivable) supervisor"
  # Check for the ACTUAL DETAIL TEXT, not just "$SYSTEMD_UNIT" — the die() message's boilerplate
  # recovery instructions name the unit unconditionally either way ("systemctl --user status
  # $SYSTEMD_UNIT"), so a bare unit-name grep here would pass even on a lost/fallback detail. Only
  # the specific detail string proves the crossed value, not the boilerplate, reached the message.
  printf '%s' "$output" | grep -qF "$SUPERVISOR_UNCLEAR_DETAIL" \
    || fail "refusal message does not contain the specific detail that crossed the subshell boundary"
}

# The heart of the ticket: a supervisor this script cannot drive must refuse, never fall through to
# `kill`. require_drivable_supervisor die()s, so it is invoked inside a command substitution — that
# forks a subshell, so its exit() only ends the subshell and this test script keeps running under
# `set -e`.
test_require_drivable_supervisor_refuses_ambiguous() {
  local output rc=0
  output="$(require_drivable_supervisor "ambiguous" 2>&1)" || rc=$?
  [ "$rc" -ne 0 ] || fail "require_drivable_supervisor accepted an ambiguous (undrivable) supervisor"
  printf '%s' "$output" | grep -qF "$LAUNCHD_LABEL" \
    || fail "refusal message does not name the launchd label it found"
  printf '%s' "$output" | grep -qF "$SYSTEMD_UNIT" \
    || fail "refusal message does not name the systemd unit it found"
}

test_require_drivable_supervisor_accepts_known_kinds() {
  require_drivable_supervisor "launchd" || fail "refused a drivable launchd supervisor"
  require_drivable_supervisor "systemd" || fail "refused a drivable systemd supervisor"
  require_drivable_supervisor "none"    || fail "refused the unsupervised case"
}

# fleetd #492 — the one-daemon check. Two live pids is the exact symptom a racing supervisor
# produces, and none of the other post-restart checks (healthz, jar id, the fresh log line) can see
# it because either daemon alone satisfies them.
test_count_daemon_pids() {
  assert_equals 0 "$(count_daemon_pids "")" "count of an empty pid list"
  assert_equals 1 "$(count_daemon_pids "4242")" "count of a single pid"
  assert_equals 2 "$(count_daemon_pids "$(printf '4242\n4343\n')")" "count of two pids"
}

test_assert_single_daemon_accepts_one_pid() {
  assert_single_daemon "4242" || fail "assert_single_daemon rejected a single running pid"
}

test_assert_single_daemon_rejects_two_pids() {
  local output rc=0
  output="$(assert_single_daemon "$(printf '4242\n4343\n')" 2>&1)" || rc=$?
  [ "$rc" -ne 0 ] || fail "assert_single_daemon accepted two simultaneously running pids"
  printf '%s' "$output" | grep -qF '4242' || fail "refusal message does not list the pids it found"
  printf '%s' "$output" | grep -qF '4343' || fail "refusal message does not list the pids it found"
}

# fleetd #493 — never build into the path a running process holds. stage_built_jar/swap_staged_jar
# are exercised directly against real files on disk (not stubs), because the whole point is file
# behavior (does the content move, does the source disappear, does a failure leave both sides
# intact) that a stubbed function cannot prove.
test_stage_built_jar_moves_off_live_path() {
  local dir jar staged saved_jar="$JAR" saved_staged="$JAR_STAGED"
  dir="$TMP/stage-ok"; mkdir -p "$dir"
  jar="$dir/fleetd.jar"; staged="$dir/fleetd-new.jar"
  printf 'built jar bytes' > "$jar"
  JAR="$jar"; JAR_STAGED="$staged"
  stage_built_jar || fail "stage_built_jar rejected a real build output"
  JAR="$saved_jar"; JAR_STAGED="$saved_staged"
  [ ! -f "$jar" ] || fail "stage_built_jar left the jar behind at the live path $jar"
  [ -f "$staged" ] || fail "stage_built_jar did not create the staged jar at $staged"
  grep -qF 'built jar bytes' "$staged" || fail "staged jar does not carry the built content"
}

test_stage_built_jar_dies_when_build_produced_nothing() {
  local dir output rc=0 saved_jar="$JAR" saved_staged="$JAR_STAGED"
  dir="$TMP/stage-missing"; mkdir -p "$dir"
  JAR="$dir/fleetd.jar"; JAR_STAGED="$dir/fleetd-new.jar"
  output="$(stage_built_jar 2>&1)" || rc=$?
  JAR="$saved_jar"; JAR_STAGED="$saved_staged"
  [ "$rc" -ne 0 ] || fail "stage_built_jar accepted a missing build output"
  printf '%s' "$output" | grep -qF "$dir/fleetd.jar" \
    || fail "refusal message does not name the missing jar path"
}

test_swap_staged_jar_moves_staged_onto_live() {
  local dir staged live
  dir="$TMP/swap-ok"; mkdir -p "$dir"
  staged="$dir/fleetd-new.jar"; live="$dir/fleetd.jar"
  printf 'swapped jar bytes' > "$staged"
  swap_staged_jar "$staged" "$live" || fail "swap_staged_jar rejected a real staged jar"
  [ ! -f "$staged" ] || fail "swap_staged_jar left the staged file behind at $staged"
  [ -f "$live" ] || fail "swap_staged_jar did not create the live jar at $live"
  grep -qF 'swapped jar bytes' "$live" || fail "live jar does not carry the staged content"
}

# The heart of the ticket's item 3: a failed swap must refuse to start. This function dies on
# failure, and die() exits — so like the require_drivable_supervisor tests above, the call goes
# inside a command substitution to contain that exit to a subshell.
test_swap_staged_jar_dies_without_staged_file() {
  local dir output rc=0
  dir="$TMP/swap-missing"; mkdir -p "$dir"
  output="$(swap_staged_jar "$dir/fleetd-new.jar" "$dir/fleetd.jar" 2>&1)" || rc=$?
  [ "$rc" -ne 0 ] || fail "swap_staged_jar accepted a missing staged jar"
  [ ! -f "$dir/fleetd.jar" ] || fail "swap_staged_jar must not create the live jar when nothing was staged"
  printf '%s' "$output" | grep -qF "$dir/fleetd-new.jar" \
    || fail "refusal message does not name the missing staged path"
}

test_swap_staged_jar_dies_when_mv_fails() {
  local dir staged live output rc=0
  dir="$TMP/swap-fail"; mkdir -p "$dir/src"
  staged="$dir/src/fleetd-new.jar"
  printf 'fake jar bytes' > "$staged"
  live="$dir/no-such-dir/fleetd.jar"   # parent directory does not exist -> mv fails
  output="$(swap_staged_jar "$staged" "$live" 2>&1)" || rc=$?
  [ "$rc" -ne 0 ] || fail "swap_staged_jar accepted a failing mv"
  [ -f "$staged" ] || fail "swap_staged_jar must leave the staged jar in place when the move fails"
  [ ! -f "$live" ] || fail "swap_staged_jar must not report success when the move failed"
  printf '%s' "$output" | grep -qF "$staged" \
    || fail "refusal message does not name the staged path that could not be moved"
}

# --no-build must still resolve $JAR (never the staged path — there is nothing to stage on this
# path) and must still die with the exact wording documented in the script's own header comment.
test_require_no_build_jar_dies_when_absent() {
  local saved_jar="$JAR" output rc=0 missing="$TMP/no-build-absent/fleetd.jar"
  JAR="$missing"
  output="$(require_no_build_jar 2>&1)" || rc=$?
  JAR="$saved_jar"
  [ "$rc" -ne 0 ] || fail "require_no_build_jar accepted a missing jar"
  printf '%s' "$output" | grep -qF "no jar at $missing — run without --no-build" \
    || fail "refusal message does not match the documented --no-build wording"
}

test_require_no_build_jar_accepts_present_jar() {
  local saved_jar="$JAR" dir
  dir="$TMP/no-build-present"; mkdir -p "$dir"
  JAR="$dir/fleetd.jar"
  printf 'existing jar' > "$JAR"
  require_no_build_jar || fail "require_no_build_jar rejected an existing jar"
  JAR="$saved_jar"
}

# wait_for_daemon_exit is the seam the swap ordering depends on: it must not report success while
# running_pid() still answers, and must report success the moment it clears. `sleep` is shadowed so
# the timeout-loop test does not actually wait out its budget.
test_wait_for_daemon_exit_returns_true_once_pid_clears() {
  # running_pid() runs inside a $(...) — a subshell — every time wait_for_daemon_exit calls it, so
  # a plain shell variable it increments would reset on each call instead of accumulating. Count in
  # a file instead, which is the one thing that actually survives across those subshells.
  local counter_file="$TMP/wait-exit-calls" final_calls
  printf '0' > "$counter_file"
  running_pid() {
    local n
    n="$(cat "$counter_file")"
    n=$((n + 1))
    printf '%s' "$n" > "$counter_file"
    if [ "$n" -lt 3 ]; then printf '4242'; else printf ''; fi
  }
  sleep() { :; }
  wait_for_daemon_exit 10 || fail "wait_for_daemon_exit did not report success once the pid cleared"
  final_calls="$(cat "$counter_file")"
  [ "$final_calls" -ge 3 ] || fail "wait_for_daemon_exit returned before actually re-checking running_pid"
  source "$ROOT/scripts/redeploy-fleetd.sh"   # restore the real running_pid/sleep for later tests
}

test_wait_for_daemon_exit_times_out_if_pid_never_clears() {
  local rc=0
  running_pid() { printf '4242'; }
  sleep() { :; }
  wait_for_daemon_exit 3 || rc=$?
  [ "$rc" -ne 0 ] || fail "wait_for_daemon_exit reported success while the pid never cleared"
  source "$ROOT/scripts/redeploy-fleetd.sh"   # restore the real running_pid/sleep for later tests
}

# fleetd #493 item 2: "put the swap after that wait, before the start." Sourcing stops before the
# main flow ever runs (see the SOURCED guard in redeploy-fleetd.sh), so the ordering guarantee
# itself — as opposed to the pure functions it's built from — can only be checked by reading the
# script's own call sites, the same way test_recovery_patterns_match_source below checks Java
# source shape instead of behavior it cannot invoke directly.
test_swap_ordered_after_wait_and_before_start() {
  local src="$ROOT/scripts/redeploy-fleetd.sh" wait_line swap_line start_line
  wait_line="$(grep -Fn 'wait_for_daemon_exit "$STOP_WAIT"' "$src" | head -1 | cut -d: -f1)"
  swap_line="$(grep -Fn 'swap_staged_jar "$JAR_STAGED" "$JAR"' "$src" | head -1 | cut -d: -f1)"
  start_line="$(grep -Fn 'say "start"' "$src" | head -1 | cut -d: -f1)"
  [ -n "$wait_line" ] || fail "could not find the wait-for-exit call site in redeploy-fleetd.sh"
  [ -n "$swap_line" ] || fail "could not find the swap call site in redeploy-fleetd.sh"
  [ -n "$start_line" ] || fail "could not find the start section in redeploy-fleetd.sh"
  [ "$swap_line" -gt "$wait_line" ] \
    || fail "swap_staged_jar (line $swap_line) is not after wait_for_daemon_exit (line $wait_line)"
  [ "$swap_line" -lt "$start_line" ] \
    || fail "swap_staged_jar (line $swap_line) is not before the start section (line $start_line)"
}

test_no_errors() {
  cat > "$TMP/no-errors.log" <<'LOG'
2026-09-05 12:00:00 INFO fleetd listening
LOG
  classify_fixture no-errors.log
  assert_equals 0 "$REDEPLOY_ERROR_COUNT" "no-errors total"
  assert_equals 0 "$REDEPLOY_UNEXPLAINED_ERRORS" "no-errors unexplained"
}

test_recovery_patterns_match_source() {
  grep -F 'AMQP connection {}: {}' "$ROOT/fleetd/src/main/java/dev/ltms/fleet/msg/AmqpReplyInbox.java" > /dev/null \
    || fail "AMQP failure pattern no longer matches source"
  grep -F 'AMQP connection recovered; cleared held replies for fresh redelivery' \
    "$ROOT/fleetd/src/main/java/dev/ltms/fleet/msg/AmqpReplyInbox.java" > /dev/null \
    || fail "reply-inbox recovery pattern no longer matches source"
  grep -F 'AMQP lead mailbox connection recovered; cleared held messages for fresh redelivery' \
    "$ROOT/fleetd/src/main/java/dev/ltms/fleet/msg/LeadMailbox.java" > /dev/null \
    || fail "lead-mailbox recovery pattern no longer matches source"
}

test_attributed_recovered_connection_error() {
  cat > "$TMP/attributed-recovered.log" <<'LOG'
2026-09-05 12:00:00 ERROR [AMQP Connection broker:5672] d.l.fleet.msg.AmqpReplyInbox - AMQP connection fleetd-reply-inbox: An unexpected connection driver error occurred
2026-09-05 12:00:01 INFO [AMQP Connection broker:5672] d.l.fleet.msg.AmqpReplyInbox - AMQP connection recovered; cleared held replies for fresh redelivery
LOG
  classify_fixture attributed-recovered.log
  assert_equals 1 "$REDEPLOY_ERROR_COUNT" "attributed-recovered total"
  assert_equals 1 "$REDEPLOY_RECOVERED_AMQP_ERRORS" "attributed-recovered errors"
  assert_equals 0 "$REDEPLOY_UNEXPLAINED_ERRORS" "attributed-recovered unexplained"
}

test_source_derived_error_shapes_recover_by_connection() {
  # These ERROR shapes come from AmqpConnectionFailureLogger on main. They need a live-log check
  # after redeploy because the new code has not yet written a production line.
  cat > "$TMP/source-derived.log" <<'LOG'
17:37:53.537 ERROR [AMQP Connection broker:5672] d.l.fleet.msg.AmqpReplyInbox - AMQP connection fleetd-reply-inbox: An unexpected connection driver error occurred
17:37:54.537 ERROR [AMQP Connection broker:5672] d.l.fleet.msg.AmqpReplyInbox - AMQP connection fleetd-reply-inbox: Caught an exception during connection recovery!
17:37:55.537 ERROR [AMQP Connection broker:5672] d.l.fleet.msg.AmqpReplyInbox - AMQP connection fleetd-reply-inbox: An unexpected connection driver error occurred
17:37:56.537 ERROR [AMQP Connection broker:5672] d.ltms.fleet.msg.LeadMailbox - AMQP connection fleetd-lead-mailbox: An unexpected connection driver error occurred
17:37:57.537 ERROR [AMQP Connection broker:5672] d.ltms.fleet.msg.LeadMailbox - AMQP connection fleetd-lead-mailbox: Caught an exception during connection recovery!
17:37:58.537 ERROR [AMQP Connection broker:5672] d.ltms.fleet.msg.LeadMailbox - AMQP connection fleetd-lead-mailbox: An unexpected connection driver error occurred
17:38:00.000 INFO  [AMQP Connection broker:5672] d.l.fleet.msg.AmqpReplyInbox - AMQP connection recovered; cleared held replies for fresh redelivery
17:38:01.000 INFO  [AMQP Connection broker:5672] d.l.fleet.msg.AmqpReplyInbox - AMQP connection recovered; cleared held replies for fresh redelivery
17:38:02.000 INFO  [AMQP Connection broker:5672] d.l.fleet.msg.AmqpReplyInbox - AMQP connection recovered; cleared held replies for fresh redelivery
17:38:03.000 INFO  [AMQP Connection broker:5672] d.ltms.fleet.msg.LeadMailbox - AMQP lead mailbox connection recovered; cleared held messages for fresh redelivery
17:38:04.000 INFO  [AMQP Connection broker:5672] d.ltms.fleet.msg.LeadMailbox - AMQP lead mailbox connection recovered; cleared held messages for fresh redelivery
17:38:05.000 INFO  [AMQP Connection broker:5672] d.ltms.fleet.msg.LeadMailbox - AMQP lead mailbox connection recovered; cleared held messages for fresh redelivery
LOG
  classify_fixture source-derived.log
  assert_equals 6 "$REDEPLOY_ERROR_COUNT" "source-derived total"
  assert_equals 6 "$REDEPLOY_RECOVERED_AMQP_ERRORS" "source-derived recovered"
  assert_equals 0 "$REDEPLOY_UNEXPLAINED_ERRORS" "source-derived unexplained"
}

test_cross_connection_unattributable_errors_stay_loud() {
  # This candidate has neither stable connection name, so LeadMailbox recovery must not consume it.
  cat > "$TMP/cross-unattributable.log" <<'LOG'
2026-09-05 12:00:00 ERROR [AMQP Connection broker:5672] unknown - AMQP connection: An unexpected connection driver error occurred
2026-09-05 12:00:01 ERROR [AMQP Connection broker:5672] unknown - AMQP connection: An unexpected connection driver error occurred
2026-09-05 12:00:02 INFO  [AMQP Connection 10.10.20.13:5672] d.ltms.fleet.msg.LeadMailbox - AMQP lead mailbox connection recovered; cleared held messages for fresh redelivery
2026-09-05 12:00:03 INFO  [AMQP Connection 10.10.20.13:5672] d.ltms.fleet.msg.LeadMailbox - AMQP lead mailbox connection recovered; cleared held messages for fresh redelivery
LOG
  classify_fixture cross-unattributable.log
  assert_equals 2 "$REDEPLOY_ERROR_COUNT" "cross-unattributable total"
  assert_equals 0 "$REDEPLOY_RECOVERED_AMQP_ERRORS" "cross-unattributable recovered"
  assert_equals 2 "$REDEPLOY_UNEXPLAINED_ERRORS" "cross-unattributable unexplained"
}

test_attributed_cross_connection_errors_stay_loud() {
  # LeadMailbox recovery cannot heal AmqpReplyInbox errors.
  cat > "$TMP/cross-attributed.log" <<'LOG'
2026-09-05 12:00:00 ERROR AmqpReplyInbox - AMQP connection fleetd-reply-inbox: An unexpected connection driver error occurred
2026-09-05 12:00:01 ERROR AmqpReplyInbox - AMQP connection fleetd-reply-inbox: An unexpected connection driver error occurred
2026-09-05 12:00:02 INFO LeadMailbox - AMQP lead mailbox connection recovered; cleared held messages for fresh redelivery
2026-09-05 12:00:03 INFO LeadMailbox - AMQP lead mailbox connection recovered; cleared held messages for fresh redelivery
LOG
  classify_fixture cross-attributed.log
  assert_equals 2 "$REDEPLOY_ERROR_COUNT" "cross-attributed total"
  assert_equals 0 "$REDEPLOY_RECOVERED_AMQP_ERRORS" "cross-attributed recovered"
  assert_equals 2 "$REDEPLOY_UNEXPLAINED_ERRORS" "cross-attributed unexplained"
}

test_attributed_unrecovered_connection_error() {
  cat > "$TMP/unrecovered.log" <<'LOG'
2026-09-05 12:00:00 ERROR AmqpReplyInbox - AMQP connection fleetd-reply-inbox: An unexpected connection driver error occurred
LOG
  classify_fixture unrecovered.log
  assert_equals 1 "$REDEPLOY_ERROR_COUNT" "unrecovered total"
  assert_equals 0 "$REDEPLOY_RECOVERED_AMQP_ERRORS" "unrecovered AMQP errors"
  assert_equals 1 "$REDEPLOY_UNEXPLAINED_ERRORS" "unrecovered unexplained"
}

test_other_error_is_unexplained() {
  cat > "$TMP/other-error.log" <<'LOG'
2026-09-05 12:00:00 ERROR dev.ltms.fleet.Fleetd - startup failed
2026-09-05 12:00:01 INFO dev.ltms.fleet.msg.AmqpReplyInbox - AMQP connection recovered; cleared held replies for fresh redelivery
LOG
  classify_fixture other-error.log
  assert_equals 1 "$REDEPLOY_ERROR_COUNT" "other-error total"
  assert_equals 1 "$REDEPLOY_UNEXPLAINED_ERRORS" "other-error unexplained"
}

test_recovery_requirement_mutation_is_caught() {
  classify_amqp_connection_errors() {
    local log_file="$1" line
    REDEPLOY_ERROR_COUNT=0
    REDEPLOY_RECOVERED_AMQP_ERRORS=0
    REDEPLOY_UNEXPLAINED_ERRORS=0
    while IFS= read -r line || [ -n "$line" ]; do
      case "$line" in
        *' ERROR '*|*' SEVERE '*)
          REDEPLOY_ERROR_COUNT=$((REDEPLOY_ERROR_COUNT + 1))
          case "$line" in
            *'AMQP connection fleetd-reply-inbox: An unexpected connection driver error occurred'*)
              REDEPLOY_RECOVERED_AMQP_ERRORS=$((REDEPLOY_RECOVERED_AMQP_ERRORS + 1))
              ;;
            *) REDEPLOY_UNEXPLAINED_ERRORS=$((REDEPLOY_UNEXPLAINED_ERRORS + 1)) ;;
          esac
          ;;
      esac
    done < "$log_file"
  }

  if test_attributed_unrecovered_connection_error > "$TMP/mutation-output" 2>&1; then
    fail "mutation accepted an unrecovered connection error"
  fi
  grep -F 'FAIL: unrecovered AMQP errors: expected 0, got 1' "$TMP/mutation-output" > /dev/null \
    || fail "mutation failed without the expected assertion"
  printf 'Recovery mutation: FAIL: unrecovered AMQP errors: expected 0, got 1\n'
}

test_shared_counter_mutation_is_caught() {
  classify_amqp_connection_errors() {
    local log_file="$1" line pending=0
    REDEPLOY_ERROR_COUNT=0
    REDEPLOY_RECOVERED_AMQP_ERRORS=0
    REDEPLOY_UNEXPLAINED_ERRORS=0
    while IFS= read -r line || [ -n "$line" ]; do
      case "$line" in
        *' ERROR '*|*' SEVERE '*)
          REDEPLOY_ERROR_COUNT=$((REDEPLOY_ERROR_COUNT + 1))
          case "$line" in
            *'AMQP connection'*'An unexpected connection driver error occurred'*|*'AMQP connection'*'Caught an exception during connection recovery!'*)
              case "$line" in
                *'fleetd-reply-inbox'*|*'fleetd-lead-mailbox'*) pending=$((pending + 1)) ;;
                *) REDEPLOY_UNEXPLAINED_ERRORS=$((REDEPLOY_UNEXPLAINED_ERRORS + 1)) ;;
              esac
              ;;
            *) REDEPLOY_UNEXPLAINED_ERRORS=$((REDEPLOY_UNEXPLAINED_ERRORS + 1)) ;;
          esac
          ;;
        *'AMQP connection recovered; cleared held replies for fresh redelivery'*|*'AMQP lead mailbox connection recovered; cleared held messages for fresh redelivery'*)
          if [ "$pending" -gt 0 ]; then
            pending=$((pending - 1))
            REDEPLOY_RECOVERED_AMQP_ERRORS=$((REDEPLOY_RECOVERED_AMQP_ERRORS + 1))
          fi
          ;;
      esac
    done < "$log_file"
    REDEPLOY_UNEXPLAINED_ERRORS=$((REDEPLOY_UNEXPLAINED_ERRORS + pending))
  }

  if test_attributed_cross_connection_errors_stay_loud > "$TMP/shared-mutation-output" 2>&1; then
    fail "shared counter mutation accepted cross-connection recovery"
  fi
  grep -F 'FAIL: cross-attributed recovered: expected 0, got 2' "$TMP/shared-mutation-output" > /dev/null \
    || fail "shared counter mutation failed without the expected assertion"
  printf 'Shared-counter mutation: FAIL: cross-attributed recovered: expected 0, got 2\n'
}

test_unattributable_quiet_mutation_is_caught() {
  classify_amqp_connection_errors() {
    local log_file="$1" line
    REDEPLOY_ERROR_COUNT=0
    REDEPLOY_RECOVERED_AMQP_ERRORS=0
    REDEPLOY_UNEXPLAINED_ERRORS=0
    while IFS= read -r line || [ -n "$line" ]; do
      case "$line" in
        *' ERROR '*|*' SEVERE '*)
          REDEPLOY_ERROR_COUNT=$((REDEPLOY_ERROR_COUNT + 1))
          case "$line" in
            *'AMQP connection'*'An unexpected connection driver error occurred'*|*'AMQP connection'*'Caught an exception during connection recovery!'*)
              REDEPLOY_RECOVERED_AMQP_ERRORS=$((REDEPLOY_RECOVERED_AMQP_ERRORS + 1))
              ;;
            *) REDEPLOY_UNEXPLAINED_ERRORS=$((REDEPLOY_UNEXPLAINED_ERRORS + 1)) ;;
          esac
          ;;
      esac
    done < "$log_file"
  }

  if test_cross_connection_unattributable_errors_stay_loud > "$TMP/unattributable-mutation-output" 2>&1; then
    fail "unattributable mutation accepted an unknown connection"
  fi
  grep -F 'FAIL: cross-unattributable recovered: expected 0, got 2' "$TMP/unattributable-mutation-output" > /dev/null \
    || fail "unattributable mutation failed without the expected assertion"
  printf 'Unattributable mutation: FAIL: cross-unattributable recovered: expected 0, got 2\n'
}

test_detect_supervisor_launchd_only
test_detect_supervisor_systemd_only
test_detect_supervisor_none
test_detect_supervisor_systemd_installed_not_loaded_is_unclear
test_detect_supervisor_launchd_installed_not_loaded_is_unclear
test_detect_supervisor_systemd_probe_error_is_unclear
test_require_drivable_supervisor_refuses_ambiguous
test_require_drivable_supervisor_refuses_unclear
test_require_drivable_supervisor_accepts_known_kinds
test_count_daemon_pids
test_assert_single_daemon_accepts_one_pid
test_assert_single_daemon_rejects_two_pids
test_stage_built_jar_moves_off_live_path
test_stage_built_jar_dies_when_build_produced_nothing
test_swap_staged_jar_moves_staged_onto_live
test_swap_staged_jar_dies_without_staged_file
test_swap_staged_jar_dies_when_mv_fails
test_require_no_build_jar_dies_when_absent
test_require_no_build_jar_accepts_present_jar
test_wait_for_daemon_exit_returns_true_once_pid_clears
test_wait_for_daemon_exit_times_out_if_pid_never_clears
test_swap_ordered_after_wait_and_before_start
test_no_errors
test_recovery_patterns_match_source
test_attributed_recovered_connection_error
test_source_derived_error_shapes_recover_by_connection
test_cross_connection_unattributable_errors_stay_loud
test_attributed_cross_connection_errors_stay_loud
test_attributed_unrecovered_connection_error
test_other_error_is_unexplained
test_recovery_requirement_mutation_is_caught
test_shared_counter_mutation_is_caught
test_unattributable_quiet_mutation_is_caught
printf 'PASS: redeploy log classifier\n'