diff --git a/scripts/rename-checkout.sh b/scripts/rename-checkout.sh
new file mode 100755
index 0000000..9243aed
--- /dev/null
+++ b/scripts/rename-checkout.sh
@@ -0,0 +1,374 @@
+#!/usr/bin/env bash
+#
+# Rename this checkout from ~/LTMS/claude-bridge to ~/LTMS/fleetd.
+#
+# The project was renamed upstream (fleet/fleetd on git.ltms.dev), but the checkout keeps its old
+# name. Renaming it by hand misses surfaces, because the absolute path is written down in more
+# places than the directory itself:
+#
+#   1. The launchd agent (~/Library/LaunchAgents/dev.ltms.bridged.plist) hard-codes absolute paths
+#      to the wrapper script and the jar. Move the checkout without fixing it and the daemon never
+#      starts again after a reboot.
+#   2. Every git worktree carries a `.git` FILE with an ABSOLUTE pointer into the main checkout
+#      (`gitdir: /…/claude-bridge/.git/worktrees/<id>`). Rename the main checkout and every
+#      worktree breaks at once ("not a git repository").
+#   3. Claude Code keys saved sessions and memory by a slug derived from the working directory,
+#      with `/` and `.` replaced by `-`. Move the checkout and it computes a NEW slug, finds
+#      nothing, and silently starts empty — every saved session is still on disk, just unreachable.
+#   4. bridged/bridged.yaml is gitignored, so it survives only in the live checkout and holds
+#      `fleet.leaders.*.cwd` and `configDir` — both absolute, both old.
+#   5. A running daemon holds the old paths open. Moving underneath it corrupts its state, so the
+#      daemon stops FIRST, and the script waits for the process to actually exit rather than
+#      assuming (same trap as redeploy-bridged.sh).
+#   6. An old daemon that never died looks identical from the outside, so verification polls
+#      /healthz AND demands a FRESH "bridged listening" log line dated after the restart, anchored
+#      to a line-count marker taken before anything moved.
+#
+# Usage:
+#   scripts/rename-checkout.sh --check    # report what holds the old path; changes nothing
+#   scripts/rename-checkout.sh            # stop daemon, move everything, restart, verify
+#   scripts/rename-checkout.sh --yes      # skip the confirmation prompt
+#
+# Run this FROM INSIDE OR OUTSIDE the checkout — it operates on fixed absolute paths, never on
+# $PWD, because after the rename $PWD itself is gone.
+#
+# Exits non-zero on any failure. A failed pre-flight never touches the daemon.
+
+set -euo pipefail
+
+OLD_PATH="/Users/dai.ha/LTMS/claude-bridge"
+NEW_PATH="/Users/dai.ha/LTMS/fleetd"
+BRIDGED_SUB="bridged"                       # daemon lives at <checkout>/bridged/
+JAR_NAME="bridged.jar"
+OUT_NAME="bridged.out"
+
+CC_INSTANCE="ltms"
+CC_PROJECTS="$HOME/.ccs/instances/$CC_INSTANCE/projects"
+
+LAUNCHD_LABEL='dev.ltms.bridged'
+LAUNCHD_PLIST="$HOME/Library/LaunchAgents/$LAUNCHD_LABEL.plist"
+
+HEALTH='http://127.0.0.1:8765/healthz'
+PATTERN="target/$JAR_NAME"
+STOP_WAIT=30      # seconds to wait for a clean daemon exit before reporting failure
+HEALTH_WAIT=60    # seconds to wait for /healthz to answer after start
+
+ASSUME_YES=0; CHECK_ONLY=0
+for arg in "$@"; do
+  case "$arg" in
+    --check)   CHECK_ONLY=1 ;;
+    --yes|-y)  ASSUME_YES=1 ;;
+    -h|--help) sed -n '3,40p' "${BASH_SOURCE[0]}"; exit 0 ;;
+    *) echo "unknown option: $arg (try --help)" >&2; exit 2 ;;
+  esac
+done
+
+say()  { printf '\n\033[1m== %s\033[0m\n' "$*"; }
+ok()   { printf '   ok    %s\n' "$*"; }
+warn() { printf '   WARN  %s\n' "$*"; }
+die()  { printf '\n   FAIL  %s\n\n' "$*" >&2; exit 1; }
+
+running_pid() { pgrep -f "$PATTERN" || true; }
+launchd_installed() { [ -f "$LAUNCHD_PLIST" ]; }
+launchd_loaded() { launchctl list "$LAUNCHD_LABEL" >/dev/null 2>&1; }
+
+# Claude Code derives its per-project directory name from the working directory by replacing
+# "/" and "." with "-". Derived here, never hardcoded, so the script stays correct if either
+# endpoint path ever changes again.
+cc_slug() { printf '%s' "$1" | tr '/.' '-'; }
+
+OLD_OUT="$OLD_PATH/$BRIDGED_SUB/$OUT_NAME"
+NEW_OUT="$NEW_PATH/$BRIDGED_SUB/$OUT_NAME"
+
+# Files under a directory that contain the literal old path, with a hit count each. Read-only.
+# Skips .git internals, build output and node_modules: they are generated, huge, and repaired by
+# rebuilding rather than rewriting.
+scan_old_path_in() {
+  local root="$1"
+  [ -e "$root" ] || return 0
+  grep -rIlF --exclude-dir=.git --exclude-dir=target --exclude-dir=node_modules \
+    "$OLD_PATH" "$root" 2>/dev/null || true
+}
+
+report_hits() {
+  local label="$1" root="$2" f n total=0
+  while IFS= read -r f; do
+    n="$(grep -cF "$OLD_PATH" "$f" 2>/dev/null || true)"
+    printf '     %5d  %s\n' "$n" "${f#"$root"/}"
+    total=$((total + 1))
+  done < <(scan_old_path_in "$root")
+  if [ "$total" -eq 0 ]; then
+    ok "$label: no files reference the old path"
+  else
+    warn "$label: $total file(s) reference the old path:"
+  fi
+}
+
+# ---------------------------------------------------------------------- --check
+
+if [ "$CHECK_ONLY" = 1 ]; then
+  say "--check (read-only): who holds $OLD_PATH"
+
+  say "1. files containing the old absolute path"
+  if [ -d "$OLD_PATH" ]; then
+    report_hits "checkout ($OLD_PATH)" "$OLD_PATH"
+  else
+    warn "checkout $OLD_PATH does not exist — skipping its scan"
+  fi
+  if launchd_installed; then
+    report_hits "installed launchd plist ($LAUNCHD_PLIST)" "$LAUNCHD_PLIST"
+  else
+    warn "installed launchd plist not found at $LAUNCHD_PLIST"
+  fi
+  report_hits "Claude Code instance data ($CC_PROJECTS)" "$CC_PROJECTS"
+
+  say "2. launchd agent"
+  if launchd_installed; then
+    ok "installed: $LAUNCHD_PLIST"
+    ARGS="$(/usr/libexec/PlistBuddy -c 'Print :ProgramArguments' "$LAUNCHD_PLIST" 2>/dev/null | grep -F '/' || true)"
+    if printf '%s' "$ARGS" | grep -qF "$OLD_PATH"; then
+      warn "plist ProgramArguments point at the OLD path:"
+      printf '%s\n' "$ARGS" | sed 's/^/           /'
+    elif [ -n "$ARGS" ]; then
+      ok "plist ProgramArguments do not reference the old path"
+    else
+      warn "could not read ProgramArguments from the plist"
+    fi
+  else
+    warn "launchd agent NOT installed (daemon would be started by hand only)"
+  fi
+  if launchd_loaded; then
+    ok "loaded: launchd supervises '$LAUNCHD_LABEL'"
+  else
+    warn "launchd agent not loaded"
+  fi
+
+  say "3. Claude Code project-state directory"
+  OLD_SLUG="$(cc_slug "$OLD_PATH")"; NEW_SLUG="$(cc_slug "$NEW_PATH")"
+  if [ -d "$CC_PROJECTS/$OLD_SLUG" ]; then
+    ok "old slug EXISTS: $CC_PROJECTS/$OLD_SLUG ($(find "$CC_PROJECTS/$OLD_SLUG" -type f | wc -l | tr -d ' ') files)"
+  else
+    warn "old slug missing: $CC_PROJECTS/$OLD_SLUG"
+  fi
+  if [ -e "$CC_PROJECTS/$NEW_SLUG" ]; then
+    warn "new slug ALREADY EXISTS: $CC_PROJECTS/$NEW_SLUG — moving over it needs a decision"
+  else
+    ok "new slug absent (clean): $CC_PROJECTS/$NEW_SLUG"
+  fi
+
+  say "4. git worktrees"
+  if [ -d "$OLD_PATH" ]; then
+    git -C "$OLD_PATH" worktree list || warn "'git worktree list' failed"
+    BROKEN=0
+    while IFS= read -r wt; do
+      [ "$wt" = "$OLD_PATH" ] && continue        # the main checkout moves WITH the repo
+      GITFILE="$wt/.git"
+      if [ -f "$GITFILE" ] && grep -qF "$OLD_PATH" "$GITFILE" 2>/dev/null; then
+        warn "worktree $wt — .git pointer references the old path (breaks on rename)"
+        BROKEN=$((BROKEN + 1))
+      fi
+    done < <(git -C "$OLD_PATH" worktree list --porcelain 2>/dev/null | sed -n 's/^worktree //p')
+    if [ "$BROKEN" -eq 0 ]; then
+      ok "no external worktree .git pointer references the old path"
+    fi
+  else
+    warn "checkout $OLD_PATH missing — cannot enumerate worktrees"
+  fi
+
+  say "5. daemon process"
+  PID="$(running_pid)"
+  if [ -n "$PID" ]; then
+    ok "daemon running, pid $PID"
+    CMD="$(ps -p "$PID" -o command= 2>/dev/null || true)"
+    if printf '%s' "$CMD" | grep -qF "$OLD_PATH"; then
+      warn "it runs the OLD path: $CMD"
+    else
+      ok "command: $CMD"
+    fi
+  else
+    warn "no daemon running"
+  fi
+
+  say "--check done: nothing changed"
+  exit 0
+fi
+
+# ------------------------------------------------------------------- apply mode
+
+say "pre-flight"
+[ -d "$OLD_PATH" ] || die "old checkout $OLD_PATH does not exist — nothing to rename"
+[ -e "$NEW_PATH" ] && die "new path $NEW_PATH already exists — refusing to overwrite"
+if [ -n "$(git -C "$OLD_PATH" status --porcelain 2>/dev/null)" ]; then
+  git -C "$OLD_PATH" status --short | sed 's/^/       /'
+  die "working tree at $OLD_PATH is dirty — commit or stash first, then rerun"
+fi
+ok "working tree clean, target path free"
+
+if [ "$ASSUME_YES" = 0 ]; then
+  echo
+  echo "   This MOVES the checkout this system runs from and RESTARTS the daemon."
+  echo "   If you are connected through that daemon, your connection dies mid-turn."
+  echo
+  read -r -p "   Type yes to continue: " reply
+  [ "$reply" = "yes" ] || die "aborted — nothing changed"
+fi
+
+SUPERVISED=0
+launchd_loaded && SUPERVISED=1
+
+# ------------------------------------------------------- stop the daemon FIRST
+say "stop"
+OLD_PID="$(running_pid)"
+RESTART_MARK="$(wc -l < "$OLD_OUT" 2>/dev/null || echo 0)"   # demand a FRESH listening line later
+if [ -n "$OLD_PID" ]; then
+  if [ "$SUPERVISED" = 1 ]; then
+    echo "   supervision is ON: 'launchctl unload' (not kill) so launchd's KeepAlive cannot"
+    echo "   restart the OLD jar out from under this script."
+    launchctl unload -w "$LAUNCHD_PLIST" \
+      || die "launchctl unload failed — investigate before retrying; NOTHING has been moved"
+  else
+    kill "$OLD_PID"
+  fi
+  for _ in $(seq "$STOP_WAIT"); do
+    [ -z "$(running_pid)" ] && break
+    sleep 1
+  done
+  [ -z "$(running_pid)" ] || die "pid $OLD_PID still alive after ${STOP_WAIT}s — NOT escalating to kill -9 and NOT moving anything. Wait or stop it by hand."
+  ok "pid $OLD_PID exited"
+elif [ "$SUPERVISED" = 1 ]; then
+  launchctl unload -w "$LAUNCHD_PLIST" 2>/dev/null || true
+  ok "launchd agent unloaded (daemon was not running)"
+else
+  ok "daemon was not running"
+fi
+
+# ------------------------------------------------------------------- move things
+say "move"
+mv "$OLD_PATH" "$NEW_PATH" || die "mv $OLD_PATH -> $NEW_PATH failed — the checkout is now at its old name, nothing else was touched"
+ok "checkout moved: $OLD_PATH -> $NEW_PATH"
+
+OLD_SLUG="$(cc_slug "$OLD_PATH")"; NEW_SLUG="$(cc_slug "$NEW_PATH")"
+if [ -d "$CC_PROJECTS/$OLD_SLUG" ]; then
+  if [ -e "$CC_PROJECTS/$NEW_SLUG" ]; then
+    warn "NOT moving Claude Code state: $CC_PROJECTS/$NEW_SLUG already exists — merge by hand"
+  else
+    mv "$CC_PROJECTS/$OLD_SLUG" "$CC_PROJECTS/$NEW_SLUG" \
+      || warn "moving Claude Code project state failed — sessions remain under the old slug"
+    ok "Claude Code project state moved: $OLD_SLUG -> $NEW_SLUG"
+  fi
+else
+  warn "no Claude Code project state at $CC_PROJECTS/$OLD_SLUG — nothing to move"
+fi
+
+# ------------------------------------------------------- repair the worktrees
+say "repair worktrees"
+FIXED=0
+for GITDIR_FILE in "$NEW_PATH"/.git/worktrees/*/gitdir; do
+  [ -f "$GITDIR_FILE" ] || continue
+  WT_GIT="$(cat "$GITDIR_FILE")"
+  if [ -f "$WT_GIT" ] && grep -qF "$OLD_PATH" "$WT_GIT"; then
+    sed -i '' "s|$OLD_PATH|$NEW_PATH|g" "$WT_GIT" \
+      || warn "could not rewrite $WT_GIT — that worktree stays broken until fixed by hand"
+    FIXED=$((FIXED + 1))
+  fi
+done
+if git -C "$NEW_PATH" worktree list >/dev/null 2>&1; then
+  ok "main repo answers after the rename"
+else
+  die "git cannot read $NEW_PATH after the rename — inspect .git by hand"
+fi
+if [ "$FIXED" -gt 0 ]; then
+  ok "rewrote $FIXED worktree .git pointer(s) to the new path"
+else
+  ok "no worktree pointer referenced the old path"
+fi
+
+# ------------------------------------- rewrite gitignored config, if it survived
+YAML="$NEW_PATH/$BRIDGED_SUB/bridged.yaml"
+if [ -f "$YAML" ]; then
+  if grep -qF "$OLD_PATH" "$YAML"; then
+    cp "$YAML" "$YAML.pre-rename.bak"
+    sed -i '' "s|$OLD_PATH|$NEW_PATH|g" "$YAML"
+    ok "rewrote $YAML (backup: $YAML.pre-rename.bak)"
+  else
+    ok "$YAML does not reference the old path"
+  fi
+else
+  warn "no $YAML present — skipped (this branch could not be exercised from a worktree)"
+fi
+
+# --------------------------------------------------------- fix + reload launchd
+say "launchd"
+if launchd_installed; then
+  if grep -qF "$OLD_PATH" "$LAUNCHD_PLIST"; then
+    cp "$LAUNCHD_PLIST" "$LAUNCHD_PLIST.pre-rename.bak"
+    sed -i '' "s|$OLD_PATH|$NEW_PATH|g" "$LAUNCHD_PLIST"
+    plutil -lint "$LAUNCHD_PLIST" >/dev/null \
+      || die "rewritten plist fails plutil -lint — restore $LAUNCHD_PLIST.pre-rename.bak and fix by hand"
+    ok "rewrote $LAUNCHD_PLIST (backup beside it)"
+  else
+    ok "installed plist does not reference the old path"
+  fi
+else
+  warn "launchd agent not installed — starting unsupervised below"
+fi
+
+# ------------------------------------------------------------- start + verify
+say "start"
+if [ "$SUPERVISED" = 1 ]; then
+  launchctl load -w "$LAUNCHD_PLIST" || die "launchctl load failed — recover with: launchctl load -w \"$LAUNCHD_PLIST\""
+else
+  JAR="$NEW_PATH/$BRIDGED_SUB/target/$JAR_NAME"
+  [ -f "$JAR" ] || die "no jar at $JAR — build in the new location, then rerun"
+  ( cd "$NEW_PATH/$BRIDGED_SUB" && zsh -lc "nohup java -jar '$JAR' >> $OUT_NAME 2>&1 &" )
+fi
+
+for _ in $(seq 10); do
+  NEW_PID="$(running_pid)"; [ -n "$NEW_PID" ] && break; sleep 1
+done
+[ -n "${NEW_PID:-}" ] || die "no daemon process appeared. Last lines of $NEW_OUT:
+$(tail -20 "$NEW_OUT" 2>/dev/null)"
+[ "$NEW_PID" != "${OLD_PID:-}" ] || die "pid unchanged ($NEW_PID) — the old daemon never died"
+ok "started, pid $NEW_PID"
+
+say "verify"
+HEALTH_OK=0; CODE=""
+for _ in $(seq "$HEALTH_WAIT"); do
+  CODE="$(curl -s -o /dev/null -w '%{http_code}' --max-time 2 "$HEALTH" 2>/dev/null || echo 000)"
+  case "$CODE" in
+    200) HEALTH_OK=1; ok "/healthz 200"; break ;;
+    # 503 still means the daemon is UP — it means herdr is unreachable.
+    503) HEALTH_OK=1; warn "/healthz answers 503 degraded — daemon up, herdr unreachable"; break ;;
+  esac
+  sleep 1
+done
+[ "$HEALTH_OK" = 1 ] || die "/healthz never answered within ${HEALTH_WAIT}s (last code: ${CODE:-000})"
+
+if tail -n "+$((RESTART_MARK + 1))" "$NEW_OUT" 2>/dev/null | grep -q 'bridged listening'; then
+  ok "$(tail -n "+$((RESTART_MARK + 1))" "$NEW_OUT" | grep 'bridged listening' | tail -1)"
+else
+  warn "no fresh 'bridged listening' line after the restart — check $NEW_OUT yourself"
+fi
+
+# ------------------------------------------------------------------- summary
+say "changed"
+echo "   checkout:          $OLD_PATH -> $NEW_PATH"
+echo "   claude code state: $CC_PROJECTS/$OLD_SLUG -> $CC_PROJECTS/$NEW_SLUG (when present)"
+echo "   worktree .git ptr: rewritten where they named the old path"
+[ -f "$YAML" ] && echo "   bridged.yaml:      rewritten (backup kept)"
+launchd_installed && echo "   launchd plist:     rewritten (backup kept)"
+
+say "still referencing the old path (left alone on purpose)"
+LEFT=$(scan_old_path_in "$NEW_PATH")
+if [ -n "$LEFT" ]; then
+  printf '%s\n' "$LEFT" | sed 's/^/     /'
+  echo "     Review these by hand: tracked docs and IDE state are yours to update,"
+  echo "     session history must not be rewritten wholesale."
+else
+  ok "(none inside the checkout)"
+fi
+scan_old_path_in "$CC_PROJECTS" | head -5 | sed 's/^/     /' || true
+echo "     (session transcripts quote the old cwd — history, left untouched)"
+
+echo
+echo "   Next: reconnect leads/members to the renamed checkout and re-check with --check."